diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_emaclite.c | 15 |
1 files changed, 12 insertions, 3 deletions
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index b2c7afe6efe5..a17f0b60810e 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -369,6 +369,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data, * xemaclite_recv_data - Receive a frame * @drvdata: Pointer to the Emaclite device private data * @data: Address where the data is to be received + * @maxlen: Maximum supported ethernet packet length * * This function is intended to be called from the interrupt context or * with a wrapper which waits for the receive frame to be available. @@ -488,7 +489,7 @@ static void xemaclite_update_address(struct net_local *drvdata, /** * xemaclite_set_mac_address - Set the MAC address for this device * @dev: Pointer to the network device instance - * @addr: Void pointer to the sockaddr structure + * @address: Void pointer to the sockaddr structure * * This function copies the HW address from the sockaddr strucutre to the * net_device structure and updates the address in HW. @@ -638,6 +639,8 @@ static void xemaclite_rx_handler(struct net_device *dev) * @dev_id: Void pointer to the network device instance used as callback * reference * + * Return: IRQ_HANDLED + * * This function handles the Tx and Rx interrupts of the EmacLite device. */ static irqreturn_t xemaclite_interrupt(int irq, void *dev_id) @@ -771,6 +774,8 @@ static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg) * * This function waits till the device is ready to accept a new MDIO * request and then writes the val to the MDIO Write Data register. + * + * Return: 0 upon success or a negative error upon failure */ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val) @@ -804,7 +809,7 @@ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg, /** * xemaclite_mdio_setup - Register mii_bus for the Emaclite device * @lp: Pointer to the Emaclite device private data - * @ofdev: Pointer to OF device structure + * @dev: Pointer to OF device structure * * This function enables MDIO bus in the Emaclite device and registers a * mii_bus. @@ -904,6 +909,9 @@ static void xemaclite_adjust_link(struct net_device *ndev) * This function sets the MAC address, requests an IRQ and enables interrupts * for the Emaclite device and starts the Tx queue. * It also connects to the phy device, if MDIO is included in Emaclite device. + * + * Return: 0 on success. -ENODEV, if PHY cannot be connected. + * Non-zero error value on failure. */ static int xemaclite_open(struct net_device *dev) { @@ -974,6 +982,8 @@ static int xemaclite_open(struct net_device *dev) * This function stops the Tx queue, disables interrupts and frees the IRQ for * the Emaclite device. * It also disconnects the phy device associated with the Emaclite device. + * + * Return: 0, always. */ static int xemaclite_close(struct net_device *dev) { @@ -1064,7 +1074,6 @@ static const struct net_device_ops xemaclite_netdev_ops; /** * xemaclite_of_probe - Probe method for the Emaclite device. * @ofdev: Pointer to OF device structure - * @match: Pointer to the structure used for matching a device * * This function probes for the Emaclite device in the device tree. * It initializes the driver data structure and the hardware, sets the MAC |