diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/hw.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/hw.c | 265 |
1 files changed, 265 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c index 33fb26833cd0..85582bdd7524 100644 --- a/drivers/net/wireless/ath/ath10k/hw.c +++ b/drivers/net/wireless/ath/ath10k/hw.c @@ -19,6 +19,7 @@ #include "hw.h" #include "hif.h" #include "wmi-ops.h" +#include "bmi.h" const struct ath10k_hw_regs qca988x_regs = { .rtc_soc_base_address = 0x00004000, @@ -72,6 +73,9 @@ const struct ath10k_hw_regs qca6174_regs = { .pcie_intr_fw_mask = 0x00000400, .pcie_intr_ce_mask_all = 0x0007f800, .pcie_intr_clr_address = 0x00000014, + .cpu_pll_init_address = 0x00404020, + .cpu_speed_address = 0x00404024, + .core_clk_div_address = 0x00404028, }; const struct ath10k_hw_regs qca99x0_regs = { @@ -187,6 +191,73 @@ const struct ath10k_hw_values qca4019_values = { .ce_desc_meta_data_lsb = 4, }; +const struct ath10k_hw_clk_params qca6174_clk[ATH10K_HW_REFCLK_COUNT] = { + { + .refclk = 48000000, + .div = 0xe, + .rnfrac = 0x2aaa8, + .settle_time = 2400, + .refdiv = 0, + .outdiv = 1, + }, + { + .refclk = 19200000, + .div = 0x24, + .rnfrac = 0x2aaa8, + .settle_time = 960, + .refdiv = 0, + .outdiv = 1, + }, + { + .refclk = 24000000, + .div = 0x1d, + .rnfrac = 0x15551, + .settle_time = 1200, + .refdiv = 0, + .outdiv = 1, + }, + { + .refclk = 26000000, + .div = 0x1b, + .rnfrac = 0x4ec4, + .settle_time = 1300, + .refdiv = 0, + .outdiv = 1, + }, + { + .refclk = 37400000, + .div = 0x12, + .rnfrac = 0x34b49, + .settle_time = 1870, + .refdiv = 0, + .outdiv = 1, + }, + { + .refclk = 38400000, + .div = 0x12, + .rnfrac = 0x15551, + .settle_time = 1920, + .refdiv = 0, + .outdiv = 1, + }, + { + .refclk = 40000000, + .div = 0x12, + .rnfrac = 0x26665, + .settle_time = 2000, + .refdiv = 0, + .outdiv = 1, + }, + { + .refclk = 52000000, + .div = 0x1b, + .rnfrac = 0x4ec4, + .settle_time = 2600, + .refdiv = 0, + .outdiv = 1, + }, +}; + void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey, u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev) { @@ -361,6 +432,195 @@ unlock: mutex_unlock(&ar->conf_mutex); } +/** + * ath10k_hw_qca6174_enable_pll_clock() - enable the qca6174 hw pll clock + * @ar: the ath10k blob + * + * This function is very hardware specific, the clock initialization + * steps is very sensitive and could lead to unknown crash, so they + * should be done in sequence. + * + * *** Be aware if you planned to refactor them. *** + * + * Return: 0 if successfully enable the pll, otherwise EINVAL + */ +static int ath10k_hw_qca6174_enable_pll_clock(struct ath10k *ar) +{ + int ret, wait_limit; + u32 clk_div_addr, pll_init_addr, speed_addr; + u32 addr, reg_val, mem_val; + struct ath10k_hw_params *hw; + const struct ath10k_hw_clk_params *hw_clk; + + hw = &ar->hw_params; + + if (ar->regs->core_clk_div_address == 0 || + ar->regs->cpu_pll_init_address == 0 || + ar->regs->cpu_speed_address == 0) + return -EINVAL; + + clk_div_addr = ar->regs->core_clk_div_address; + pll_init_addr = ar->regs->cpu_pll_init_address; + speed_addr = ar->regs->cpu_speed_address; + + /* Read efuse register to find out the right hw clock configuration */ + addr = (RTC_SOC_BASE_ADDRESS | EFUSE_OFFSET); + ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); + if (ret) + return -EINVAL; + + /* sanitize if the hw refclk index is out of the boundary */ + if (MS(reg_val, EFUSE_XTAL_SEL) > ATH10K_HW_REFCLK_COUNT) + return -EINVAL; + + hw_clk = &hw->hw_clk[MS(reg_val, EFUSE_XTAL_SEL)]; + + /* Set the rnfrac and outdiv params to bb_pll register */ + addr = (RTC_SOC_BASE_ADDRESS | BB_PLL_CONFIG_OFFSET); + ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); + if (ret) + return -EINVAL; + + reg_val &= ~(BB_PLL_CONFIG_FRAC_MASK | BB_PLL_CONFIG_OUTDIV_MASK); + reg_val |= (SM(hw_clk->rnfrac, BB_PLL_CONFIG_FRAC) | + SM(hw_clk->outdiv, BB_PLL_CONFIG_OUTDIV)); + ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val); + if (ret) + return -EINVAL; + + /* Set the correct settle time value to pll_settle register */ + addr = (RTC_WMAC_BASE_ADDRESS | WLAN_PLL_SETTLE_OFFSET); + ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); + if (ret) + return -EINVAL; + + reg_val &= ~WLAN_PLL_SETTLE_TIME_MASK; + reg_val |= SM(hw_clk->settle_time, WLAN_PLL_SETTLE_TIME); + ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val); + if (ret) + return -EINVAL; + + /* Set the clock_ctrl div to core_clk_ctrl register */ + addr = (RTC_SOC_BASE_ADDRESS | SOC_CORE_CLK_CTRL_OFFSET); + ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); + if (ret) + return -EINVAL; + + reg_val &= ~SOC_CORE_CLK_CTRL_DIV_MASK; + reg_val |= SM(1, SOC_CORE_CLK_CTRL_DIV); + ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val); + if (ret) + return -EINVAL; + + /* Set the clock_div register */ + mem_val = 1; + ret = ath10k_bmi_write_memory(ar, clk_div_addr, &mem_val, + sizeof(mem_val)); + if (ret) + return -EINVAL; + + /* Configure the pll_control register */ + addr = (RTC_WMAC_BASE_ADDRESS | WLAN_PLL_CONTROL_OFFSET); + ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); + if (ret) + return -EINVAL; + + reg_val |= (SM(hw_clk->refdiv, WLAN_PLL_CONTROL_REFDIV) | + SM(hw_clk->div, WLAN_PLL_CONTROL_DIV) | + SM(1, WLAN_PLL_CONTROL_NOPWD)); + ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val); + if (ret) + return -EINVAL; + + /* busy wait (max 1s) the rtc_sync status register indicate ready */ + wait_limit = 100000; + addr = (RTC_WMAC_BASE_ADDRESS | RTC_SYNC_STATUS_OFFSET); + do { + ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); + if (ret) + return -EINVAL; + + if (!MS(reg_val, RTC_SYNC_STATUS_PLL_CHANGING)) + break; + + wait_limit--; + udelay(10); + + } while (wait_limit > 0); + + if (MS(reg_val, RTC_SYNC_STATUS_PLL_CHANGING)) + return -EINVAL; + + /* Unset the pll_bypass in pll_control register */ + addr = (RTC_WMAC_BASE_ADDRESS | WLAN_PLL_CONTROL_OFFSET); + ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); + if (ret) + return -EINVAL; + + reg_val &= ~WLAN_PLL_CONTROL_BYPASS_MASK; + reg_val |= SM(0, WLAN_PLL_CONTROL_BYPASS); + ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val); + if (ret) + return -EINVAL; + + /* busy wait (max 1s) the rtc_sync status register indicate ready */ + wait_limit = 100000; + addr = (RTC_WMAC_BASE_ADDRESS | RTC_SYNC_STATUS_OFFSET); + do { + ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); + if (ret) + return -EINVAL; + + if (!MS(reg_val, RTC_SYNC_STATUS_PLL_CHANGING)) + break; + + wait_limit--; + udelay(10); + + } while (wait_limit > 0); + + if (MS(reg_val, RTC_SYNC_STATUS_PLL_CHANGING)) + return -EINVAL; + + /* Enable the hardware cpu clock register */ + addr = (RTC_SOC_BASE_ADDRESS | SOC_CPU_CLOCK_OFFSET); + ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); + if (ret) + return -EINVAL; + + reg_val &= ~SOC_CPU_CLOCK_STANDARD_MASK; + reg_val |= SM(1, SOC_CPU_CLOCK_STANDARD); + ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val); + if (ret) + return -EINVAL; + + /* unset the nopwd from pll_control register */ + addr = (RTC_WMAC_BASE_ADDRESS | WLAN_PLL_CONTROL_OFFSET); + ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); + if (ret) + return -EINVAL; + + reg_val &= ~WLAN_PLL_CONTROL_NOPWD_MASK; + ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val); + if (ret) + return -EINVAL; + + /* enable the pll_init register */ + mem_val = 1; + ret = ath10k_bmi_write_memory(ar, pll_init_addr, &mem_val, + sizeof(mem_val)); + if (ret) + return -EINVAL; + + /* set the target clock frequency to speed register */ + ret = ath10k_bmi_write_memory(ar, speed_addr, &hw->target_cpu_freq, + sizeof(hw->target_cpu_freq)); + if (ret) + return -EINVAL; + + return 0; +} + const struct ath10k_hw_ops qca988x_ops = { .set_coverage_class = ath10k_hw_qca988x_set_coverage_class, }; @@ -374,3 +634,8 @@ static int ath10k_qca99x0_rx_desc_get_l3_pad_bytes(struct htt_rx_desc *rxd) const struct ath10k_hw_ops qca99x0_ops = { .rx_desc_get_l3_pad_bytes = ath10k_qca99x0_rx_desc_get_l3_pad_bytes, }; + +const struct ath10k_hw_ops qca6174_ops = { + .set_coverage_class = ath10k_hw_qca988x_set_coverage_class, + .enable_pll_clk = ath10k_hw_qca6174_enable_pll_clock, +}; |