diff options
Diffstat (limited to 'drivers/net/ethernet/smsc')
| -rw-r--r-- | drivers/net/ethernet/smsc/smc91x.c | 7 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/smc91x.h | 65 |
2 files changed, 52 insertions, 20 deletions
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 726b80f45906..503a3b6dce91 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -2275,6 +2275,13 @@ static int smc_drv_probe(struct platform_device *pdev) if (pd) { memcpy(&lp->cfg, pd, sizeof(lp->cfg)); lp->io_shift = SMC91X_IO_SHIFT(lp->cfg.flags); + + if (!SMC_8BIT(lp) && !SMC_16BIT(lp)) { + dev_err(&pdev->dev, + "at least one of 8-bit or 16-bit access support is required.\n"); + ret = -ENXIO; + goto out_free_netdev; + } } #if IS_BUILTIN(CONFIG_OF) diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index 1a55c7976df0..e17671c9d1b0 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -37,6 +37,27 @@ #include <linux/smc91x.h> /* + * Any 16-bit access is performed with two 8-bit accesses if the hardware + * can't do it directly. Most registers are 16-bit so those are mandatory. + */ +#define SMC_outw_b(x, a, r) \ + do { \ + unsigned int __val16 = (x); \ + unsigned int __reg = (r); \ + SMC_outb(__val16, a, __reg); \ + SMC_outb(__val16 >> 8, a, __reg + (1 << SMC_IO_SHIFT)); \ + } while (0) + +#define SMC_inw_b(a, r) \ + ({ \ + unsigned int __val16; \ + unsigned int __reg = r; \ + __val16 = SMC_inb(a, __reg); \ + __val16 |= SMC_inb(a, __reg + (1 << SMC_IO_SHIFT)) << 8; \ + __val16; \ + }) + +/* * Define your architecture specific bus configuration parameters here. */ @@ -55,10 +76,30 @@ #define SMC_IO_SHIFT (lp->io_shift) #define SMC_inb(a, r) readb((a) + (r)) -#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_inw(a, r) \ + ({ \ + unsigned int __smc_r = r; \ + SMC_16BIT(lp) ? readw((a) + __smc_r) : \ + SMC_8BIT(lp) ? SMC_inw_b(a, __smc_r) : \ + ({ BUG(); 0; }); \ + }) + #define SMC_inl(a, r) readl((a) + (r)) #define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outw(v, a, r) \ + do { \ + unsigned int __v = v, __smc_r = r; \ + if (SMC_16BIT(lp)) \ + __SMC_outw(__v, a, __smc_r); \ + else if (SMC_8BIT(lp)) \ + SMC_outw_b(__v, a, __smc_r); \ + else \ + BUG(); \ + } while (0) + #define SMC_outl(v, a, r) writel(v, (a) + (r)) +#define SMC_insb(a, r, p, l) readsb((a) + (r), p, l) +#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, l) #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) @@ -66,7 +107,7 @@ #define SMC_IRQ_FLAGS (-1) /* from resource */ /* We actually can't write halfwords properly if not word aligned */ -static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg) +static inline void __SMC_outw(u16 val, void __iomem *ioaddr, int reg) { if ((machine_is_mainstone() || machine_is_stargate2() || machine_is_pxa_idp()) && reg & 2) { @@ -416,24 +457,8 @@ smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma, #if ! SMC_CAN_USE_16BIT -/* - * Any 16-bit access is performed with two 8-bit accesses if the hardware - * can't do it directly. Most registers are 16-bit so those are mandatory. - */ -#define SMC_outw(x, ioaddr, reg) \ - do { \ - unsigned int __val16 = (x); \ - SMC_outb( __val16, ioaddr, reg ); \ - SMC_outb( __val16 >> 8, ioaddr, reg + (1 << SMC_IO_SHIFT));\ - } while (0) -#define SMC_inw(ioaddr, reg) \ - ({ \ - unsigned int __val16; \ - __val16 = SMC_inb( ioaddr, reg ); \ - __val16 |= SMC_inb( ioaddr, reg + (1 << SMC_IO_SHIFT)) << 8; \ - __val16; \ - }) - +#define SMC_outw(x, ioaddr, reg) SMC_outw_b(x, ioaddr, reg) +#define SMC_inw(ioaddr, reg) SMC_inw_b(ioaddr, reg) #define SMC_insw(a, r, p, l) BUG() #define SMC_outsw(a, r, p, l) BUG() |