diff options
Diffstat (limited to 'drivers/net/ethernet/mediatek/mtk_sgmii.c')
| -rw-r--r-- | drivers/net/ethernet/mediatek/mtk_sgmii.c | 46 |
1 files changed, 32 insertions, 14 deletions
diff --git a/drivers/net/ethernet/mediatek/mtk_sgmii.c b/drivers/net/ethernet/mediatek/mtk_sgmii.c index 5c286f2c9418..bb00de1003ac 100644 --- a/drivers/net/ethernet/mediatek/mtk_sgmii.c +++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c @@ -43,11 +43,6 @@ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode, int advertise, link_timer; bool changed, use_an; - if (interface == PHY_INTERFACE_MODE_2500BASEX) - rgc3 = RG_PHY_SPEED_3_125G; - else - rgc3 = 0; - advertise = phylink_mii_c22_pcs_encode_advertisement(interface, advertising); if (advertise < 0) @@ -88,9 +83,22 @@ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode, bmcr = 0; } - /* Configure the underlying interface speed */ - regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3, - RG_PHY_SPEED_3_125G, rgc3); + if (mpcs->interface != interface) { + /* PHYA power down */ + regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, + SGMII_PHYA_PWD, SGMII_PHYA_PWD); + + if (interface == PHY_INTERFACE_MODE_2500BASEX) + rgc3 = RG_PHY_SPEED_3_125G; + else + rgc3 = 0; + + /* Configure the underlying interface speed */ + regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3, + RG_PHY_SPEED_3_125G, rgc3); + + mpcs->interface = interface; + } /* Update the advertisement, noting whether it has changed */ regmap_update_bits_check(mpcs->regmap, SGMSYS_PCS_ADVERTISE, @@ -108,9 +116,17 @@ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode, regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1, SGMII_AN_RESTART | SGMII_AN_ENABLE, bmcr); - /* Release PHYA power down state */ - regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, - SGMII_PHYA_PWD, 0); + /* Release PHYA power down state + * Only removing bit SGMII_PHYA_PWD isn't enough. + * There are cases when the SGMII_PHYA_PWD register contains 0x9 which + * prevents SGMII from working. The SGMII still shows link but no traffic + * can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was + * taken from a good working state of the SGMII interface. + * Unknown how much the QPHY needs but it is racy without a sleep. + * Tested on mt7622 & mt7986. + */ + usleep_range(50, 100); + regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, 0); return changed; } @@ -138,11 +154,11 @@ static void mtk_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode, else sgm_mode = SGMII_SPEED_1000; - if (duplex == DUPLEX_FULL) - sgm_mode |= SGMII_DUPLEX_FULL; + if (duplex != DUPLEX_FULL) + sgm_mode |= SGMII_DUPLEX_HALF; regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE, - SGMII_DUPLEX_FULL | SGMII_SPEED_MASK, + SGMII_DUPLEX_HALF | SGMII_SPEED_MASK, sgm_mode); } } @@ -171,6 +187,8 @@ int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *r, u32 ana_rgc3) return PTR_ERR(ss->pcs[i].regmap); ss->pcs[i].pcs.ops = &mtk_pcs_ops; + ss->pcs[i].pcs.poll = true; + ss->pcs[i].interface = PHY_INTERFACE_MODE_NA; } return 0; |