diff options
Diffstat (limited to 'drivers/media/video/cx231xx/cx231xx-pcb-cfg.h')
| -rw-r--r-- | drivers/media/video/cx231xx/cx231xx-pcb-cfg.h | 231 |
1 files changed, 231 insertions, 0 deletions
diff --git a/drivers/media/video/cx231xx/cx231xx-pcb-cfg.h b/drivers/media/video/cx231xx/cx231xx-pcb-cfg.h new file mode 100644 index 000000000000..f5e46e89f3ab --- /dev/null +++ b/drivers/media/video/cx231xx/cx231xx-pcb-cfg.h @@ -0,0 +1,231 @@ +/* + cx231xx-pcb-cfg.h - driver for Conexant + Cx23100/101/102 USB video capture devices + + Copyright (C) 2008 <srinivasa.deevi at conexant dot com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _PCB_CONFIG_H_ +#define _PCB_CONFIG_H_ + +#include <linux/init.h> +#include <linux/module.h> + +/*************************************************************************** + * Class Information * +***************************************************************************/ +#define CLASS_DEFAULT 0xFF + +enum VENDOR_REQUEST_TYPE { + /* Set/Get I2C */ + VRT_SET_I2C0 = 0x0, + VRT_SET_I2C1 = 0x1, + VRT_SET_I2C2 = 0x2, + VRT_GET_I2C0 = 0x4, + VRT_GET_I2C1 = 0x5, + VRT_GET_I2C2 = 0x6, + + /* Set/Get GPIO */ + VRT_SET_GPIO = 0x8, + VRT_GET_GPIO = 0x9, + + /* Set/Get GPIE */ + VRT_SET_GPIE = 0xA, + VRT_GET_GPIE = 0xB, + + /* Set/Get Register Control/Status */ + VRT_SET_REGISTER = 0xC, + VRT_GET_REGISTER = 0xD, + + /* Get Extended Compat ID Descriptor */ + VRT_GET_EXTCID_DESC = 0xFF, +}; + +enum BYTE_ENABLE_MASK { + ENABLE_ONE_BYTE = 0x1, + ENABLE_TWE_BYTE = 0x3, + ENABLE_THREE_BYTE = 0x7, + ENABLE_FOUR_BYTE = 0xF, +}; + +#define SPEED_MASK 0x1 +enum USB_SPEED{ + FULL_SPEED = 0x0, /* 0: full speed */ + HIGH_SPEED = 0x1 /* 1: high speed */ +}; + +enum _true_false{ + FALSE = 0, + TRUE = 1 +}; + +#define TS_MASK 0x6 +enum TS_PORT{ + NO_TS_PORT = 0x0, /* 2'b00: Neither port used. PCB not a Hybrid, + only offers Analog TV or Video */ + TS1_PORT = 0x4, /* 2'b10: TS1 Input (Hybrid mode : + Digital or External Analog/Compressed source) */ + TS1_TS2_PORT = 0x6, /* 2'b11: TS1 & TS2 Inputs + (Dual inputs from Digital and/or + External Analog/Compressed sources) */ + TS1_EXT_CLOCK = 0x6, /* 2'b11: TS1 & TS2 as selector + to external clock */ + TS1VIP_TS2_PORT = 0x2 /* 2'b01: TS1 used as 656/VIP Output, + TS2 Input (from Compressor) */ +}; + +#define EAVP_MASK 0x8 +enum EAV_PRESENT{ + NO_EXTERNAL_AV = 0x0, /* 0: No External A/V inputs + (no need for i2s blcok), + Analog Tuner must be present */ + EXTERNAL_AV = 0x8 /* 1: External A/V inputs + present (requires i2s blk) */ +}; + +#define ATM_MASK 0x30 +enum AT_MODE{ + DIF_TUNER = 0x30, /* 2'b11: IF Tuner (requires use of DIF) */ + BASEBAND_SOUND = 0x20, /* 2'b10: Baseband Composite & + Sound-IF Signals present */ + NO_TUNER = 0x10 /* 2'b0x: No Analog Tuner present */ +}; + +#define PWR_SEL_MASK 0x40 +enum POWE_TYPE{ + SELF_POWER = 0x0, /* 0: self power */ + BUS_POWER = 0x40 /* 1: bus power */ +}; + +enum USB_POWE_TYPE{ + USB_SELF_POWER = 0, + USB_BUS_POWER +}; + +#define BO_0_MASK 0x80 +enum AVDEC_STATUS{ + AVDEC_DISABLE = 0x0, /* 0: A/V Decoder Disabled */ + AVDEC_ENABLE = 0x80 /* 1: A/V Decoder Enabled */ +}; + +#define BO_1_MASK 0x100 + +#define BUSPOWER_MASK 0xC4 /* for Polaris spec 0.8 */ +#define SELFPOWER_MASK 0x86 + +/***************************************************************************/ +#define NOT_DECIDE_YET 0xFE +#define NOT_SUPPORTED 0xFF + +/*************************************************************************** + * for mod field use * +***************************************************************************/ +#define MOD_DIGITAL 0x1 +#define MOD_ANALOG 0x2 +#define MOD_DIF 0x4 +#define MOD_EXTERNAL 0x8 +#define CAP_ALL_MOD 0x0f + +/*************************************************************************** + * source define * +***************************************************************************/ +#define SOURCE_DIGITAL 0x1 +#define SOURCE_ANALOG 0x2 +#define SOURCE_DIF 0x4 +#define SOURCE_EXTERNAL 0x8 +#define SOURCE_TS_BDA 0x10 +#define SOURCE_TS_ENCODE 0x20 +#define SOURCE_TS_EXTERNAL 0x40 + +/*************************************************************************** + * interface information define * +***************************************************************************/ +struct INTERFACE_INFO { + u8 interrupt_index; + u8 ts1_index; + u8 ts2_index; + u8 audio_index; + u8 video_index; + u8 vanc_index; /* VBI */ + u8 hanc_index; /* Sliced CC */ + u8 ir_index; +}; + +enum INDEX_INTERFACE_INFO{ + INDEX_INTERRUPT = 0x0, + INDEX_TS1, + INDEX_TS2, + INDEX_AUDIO, + INDEX_VIDEO, + INDEX_VANC, + INDEX_HANC, + INDEX_IR, +}; + +/*************************************************************************** + * configuration information define * +***************************************************************************/ +struct CONFIG_INFO { + u8 config_index; + struct INTERFACE_INFO interface_info; +}; + +struct pcb_config { + u8 index; + u8 type; /* bus power or self power, + self power--0, bus_power--1 */ + u8 speed; /* usb speed, 2.0--1, 1.1--0 */ + u8 mode; /* digital , anlog, dif or external A/V */ + u32 ts1_source; /* three source -- BDA,External,encode */ + u32 ts2_source; + u32 analog_source; + u8 digital_index; /* bus-power used */ + u8 analog_index; /* bus-power used */ + u8 dif_index; /* bus-power used */ + u8 external_index; /* bus-power used */ + u8 config_num; /* current config num, 0,1,2, + for self-power, always 0 */ + struct CONFIG_INFO hs_config_info[3]; + struct CONFIG_INFO fs_config_info[3]; +}; + +enum INDEX_PCB_CONFIG{ + INDEX_SELFPOWER_DIGITAL_ONLY = 0x0, + INDEX_SELFPOWER_DUAL_DIGITAL, + INDEX_SELFPOWER_ANALOG_ONLY, + INDEX_SELFPOWER_DUAL, + INDEX_SELFPOWER_TRIPLE, + INDEX_SELFPOWER_COMPRESSOR, + INDEX_BUSPOWER_DIGITAL_ONLY, + INDEX_BUSPOWER_ANALOG_ONLY, + INDEX_BUSPOWER_DIF_ONLY, + INDEX_BUSPOWER_EXTERNAL_ONLY, + INDEX_BUSPOWER_EXTERNAL_ANALOG, + INDEX_BUSPOWER_EXTERNAL_DIF, + INDEX_BUSPOWER_EXTERNAL_DIGITAL, + INDEX_BUSPOWER_DIGITAL_ANALOG, + INDEX_BUSPOWER_DIGITAL_DIF, + INDEX_BUSPOWER_DIGITAL_ANALOG_EXTERNAL, + INDEX_BUSPOWER_DIGITAL_DIF_EXTERNAL, +}; + +/***************************************************************************/ +struct cx231xx; + +u32 initialize_cx231xx(struct cx231xx *p_dev); + +#endif |