diff options
Diffstat (limited to 'drivers/iio')
| -rw-r--r-- | drivers/iio/adc/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/iio/adc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/iio/adc/mxs-lradc.c | 1750 |
3 files changed, 0 insertions, 1765 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 97a3803f0b34..5d134053a1bc 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -424,20 +424,6 @@ config MESON_SARADC To compile this driver as a module, choose M here: the module will be called meson_saradc. -config MXS_LRADC - tristate "Freescale i.MX23/i.MX28 LRADC" - depends on (ARCH_MXS || COMPILE_TEST) && HAS_IOMEM - depends on INPUT - select STMP_DEVICE - select IIO_BUFFER - select IIO_TRIGGERED_BUFFER - help - Say yes here to build support for i.MX23/i.MX28 LRADC convertor - built into these chips. - - To compile this driver as a module, choose M here: the - module will be called mxs-lradc. - config NAU7802 tristate "Nuvoton NAU7802 ADC driver" depends on I2C diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 38f0e153b481..54b5f7259063 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -40,7 +40,6 @@ obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o obj-$(CONFIG_MESON_SARADC) += meson_saradc.o obj-$(CONFIG_MXS_LRADC_ADC) += mxs-lradc-adc.o -obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o obj-$(CONFIG_NAU7802) += nau7802.o obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o diff --git a/drivers/iio/adc/mxs-lradc.c b/drivers/iio/adc/mxs-lradc.c deleted file mode 100644 index b84d37c80a94..000000000000 --- a/drivers/iio/adc/mxs-lradc.c +++ /dev/null @@ -1,1750 +0,0 @@ -/* - * Freescale MXS LRADC driver - * - * Copyright (c) 2012 DENX Software Engineering, GmbH. - * Marek Vasut <marex@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/bitops.h> -#include <linux/clk.h> -#include <linux/completion.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/stmp_device.h> -#include <linux/sysfs.h> - -#include <linux/iio/buffer.h> -#include <linux/iio/iio.h> -#include <linux/iio/trigger.h> -#include <linux/iio/trigger_consumer.h> -#include <linux/iio/triggered_buffer.h> -#include <linux/iio/sysfs.h> - -#define DRIVER_NAME "mxs-lradc" - -#define LRADC_MAX_DELAY_CHANS 4 -#define LRADC_MAX_MAPPED_CHANS 8 -#define LRADC_MAX_TOTAL_CHANS 16 - -#define LRADC_DELAY_TIMER_HZ 2000 - -/* - * Make this runtime configurable if necessary. Currently, if the buffered mode - * is enabled, the LRADC takes LRADC_DELAY_TIMER_LOOP samples of data before - * triggering IRQ. The sampling happens every (LRADC_DELAY_TIMER_PER / 2000) - * seconds. The result is that the samples arrive every 500mS. - */ -#define LRADC_DELAY_TIMER_PER 200 -#define LRADC_DELAY_TIMER_LOOP 5 - -/* - * Once the pen touches the touchscreen, the touchscreen switches from - * IRQ-driven mode to polling mode to prevent interrupt storm. The polling - * is realized by worker thread, which is called every 20 or so milliseconds. - * This gives the touchscreen enough fluency and does not strain the system - * too much. - */ -#define LRADC_TS_SAMPLE_DELAY_MS 5 - -/* - * The LRADC reads the following amount of samples from each touchscreen - * channel and the driver then computes average of these. - */ -#define LRADC_TS_SAMPLE_AMOUNT 4 - -enum mxs_lradc_id { - IMX23_LRADC, - IMX28_LRADC, -}; - -static const char * const mx23_lradc_irq_names[] = { - "mxs-lradc-touchscreen", - "mxs-lradc-channel0", - "mxs-lradc-channel1", - "mxs-lradc-channel2", - "mxs-lradc-channel3", - "mxs-lradc-channel4", - "mxs-lradc-channel5", - "mxs-lradc-channel6", - "mxs-lradc-channel7", -}; - -static const char * const mx28_lradc_irq_names[] = { - "mxs-lradc-touchscreen", - "mxs-lradc-thresh0", - "mxs-lradc-thresh1", - "mxs-lradc-channel0", - "mxs-lradc-channel1", - "mxs-lradc-channel2", - "mxs-lradc-channel3", - "mxs-lradc-channel4", - "mxs-lradc-channel5", - "mxs-lradc-channel6", - "mxs-lradc-channel7", - "mxs-lradc-button0", - "mxs-lradc-button1", -}; - -struct mxs_lradc_of_config { - const int irq_count; - const char * const *irq_name; - const u32 *vref_mv; -}; - -#define VREF_MV_BASE 1850 - -static const u32 mx23_vref_mv[LRADC_MAX_TOTAL_CHANS] = { - VREF_MV_BASE, /* CH0 */ - VREF_MV_BASE, /* CH1 */ - VREF_MV_BASE, /* CH2 */ - VREF_MV_BASE, /* CH3 */ - VREF_MV_BASE, /* CH4 */ - VREF_MV_BASE, /* CH5 */ - VREF_MV_BASE * 2, /* CH6 VDDIO */ - VREF_MV_BASE * 4, /* CH7 VBATT */ - VREF_MV_BASE, /* CH8 Temp sense 0 */ - VREF_MV_BASE, /* CH9 Temp sense 1 */ - VREF_MV_BASE, /* CH10 */ - VREF_MV_BASE, /* CH11 */ - VREF_MV_BASE, /* CH12 USB_DP */ - VREF_MV_BASE, /* CH13 USB_DN */ - VREF_MV_BASE, /* CH14 VBG */ - VREF_MV_BASE * 4, /* CH15 VDD5V */ -}; - -static const u32 mx28_vref_mv[LRADC_MAX_TOTAL_CHANS] = { - VREF_MV_BASE, /* CH0 */ - VREF_MV_BASE, /* CH1 */ - VREF_MV_BASE, /* CH2 */ - VREF_MV_BASE, /* CH3 */ - VREF_MV_BASE, /* CH4 */ - VREF_MV_BASE, /* CH5 */ - VREF_MV_BASE, /* CH6 */ - VREF_MV_BASE * 4, /* CH7 VBATT */ - VREF_MV_BASE, /* CH8 Temp sense 0 */ - VREF_MV_BASE, /* CH9 Temp sense 1 */ - VREF_MV_BASE * 2, /* CH10 VDDIO */ - VREF_MV_BASE, /* CH11 VTH */ - VREF_MV_BASE * 2, /* CH12 VDDA */ - VREF_MV_BASE, /* CH13 VDDD */ - VREF_MV_BASE, /* CH14 VBG */ - VREF_MV_BASE * 4, /* CH15 VDD5V */ -}; - -static const struct mxs_lradc_of_config mxs_lradc_of_config[] = { - [IMX23_LRADC] = { - .irq_count = ARRAY_SIZE(mx23_lradc_irq_names), - .irq_name = mx23_lradc_irq_names, - .vref_mv = mx23_vref_mv, - }, - [IMX28_LRADC] = { - .irq_count = ARRAY_SIZE(mx28_lradc_irq_names), - .irq_name = mx28_lradc_irq_names, - .vref_mv = mx28_vref_mv, - }, -}; - -enum mxs_lradc_ts { - MXS_LRADC_TOUCHSCREEN_NONE = 0, - MXS_LRADC_TOUCHSCREEN_4WIRE, - MXS_LRADC_TOUCHSCREEN_5WIRE, -}; - -/* - * Touchscreen handling - */ -enum lradc_ts_plate { - LRADC_TOUCH = 0, - LRADC_SAMPLE_X, - LRADC_SAMPLE_Y, - LRADC_SAMPLE_PRESSURE, - LRADC_SAMPLE_VALID, -}; - -enum mxs_lradc_divbytwo { - MXS_LRADC_DIV_DISABLED = 0, - MXS_LRADC_DIV_ENABLED, -}; - -struct mxs_lradc_scale { - unsigned int integer; - unsigned int nano; -}; - -struct mxs_lradc { - struct device *dev; - void __iomem *base; - int irq[13]; - - struct clk *clk; - - u32 *buffer; - struct iio_trigger *trig; - - struct mutex lock; - - struct completion completion; - - const u32 *vref_mv; - struct mxs_lradc_scale scale_avail[LRADC_MAX_TOTAL_CHANS][2]; - unsigned long is_divided; - - /* - * When the touchscreen is enabled, we give it two private virtual - * channels: #6 and #7. This means that only 6 virtual channels (instead - * of 8) will be available for buffered capture. - */ -#define TOUCHSCREEN_VCHANNEL1 7 -#define TOUCHSCREEN_VCHANNEL2 6 -#define BUFFER_VCHANS_LIMITED 0x3f -#define BUFFER_VCHANS_ALL 0xff - u8 buffer_vchans; - - /* - * Furthermore, certain LRADC channels are shared between touchscreen - * and/or touch-buttons and generic LRADC block. Therefore when using - * either of these, these channels are not available for the regular - * sampling. The shared channels are as follows: - * - * CH0 -- Touch button #0 - * CH1 -- Touch button #1 - * CH2 -- Touch screen XPUL - * CH3 -- Touch screen YPLL - * CH4 -- Touch screen XNUL - * CH5 -- Touch screen YNLR - * CH6 -- Touch screen WIPER (5-wire only) - * - * The bit fields below represents which parts of the LRADC block are - * switched into special mode of operation. These channels can not - * be sampled as regular LRADC channels. The driver will refuse any - * attempt to sample these channels. - */ -#define CHAN_MASK_TOUCHBUTTON (BIT(1) | BIT(0)) -#define CHAN_MASK_TOUCHSCREEN_4WIRE (0xf << 2) -#define CHAN_MASK_TOUCHSCREEN_5WIRE (0x1f << 2) - enum mxs_lradc_ts use_touchscreen; - bool use_touchbutton; - - struct input_dev *ts_input; - - enum mxs_lradc_id soc; - enum lradc_ts_plate cur_plate; /* state machine */ - bool ts_valid; - unsigned ts_x_pos; - unsigned ts_y_pos; - unsigned ts_pressure; - - /* handle touchscreen's physical behaviour */ - /* samples per coordinate */ - unsigned over_sample_cnt; - /* time clocks between samples */ - unsigned over_sample_delay; - /* time in clocks to wait after the plates where switched */ - unsigned settling_delay; -}; - -#define LRADC_CTRL0 0x00 -# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE BIT(23) -# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE BIT(22) -# define LRADC_CTRL0_MX28_YNNSW /* YM */ BIT(21) -# define LRADC_CTRL0_MX28_YPNSW /* YP */ BIT(20) -# define LRADC_CTRL0_MX28_YPPSW /* YP */ BIT(19) -# define LRADC_CTRL0_MX28_XNNSW /* XM */ BIT(18) -# define LRADC_CTRL0_MX28_XNPSW /* XM */ BIT(17) -# define LRADC_CTRL0_MX28_XPPSW /* XP */ BIT(16) - -# define LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE BIT(20) -# define LRADC_CTRL0_MX23_YM BIT(19) -# define LRADC_CTRL0_MX23_XM BIT(18) -# define LRADC_CTRL0_MX23_YP BIT(17) -# define LRADC_CTRL0_MX23_XP BIT(16) - -# define LRADC_CTRL0_MX28_PLATE_MASK \ - (LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \ - LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \ - LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \ - LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW) - -# define LRADC_CTRL0_MX23_PLATE_MASK \ - (LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE | \ - LRADC_CTRL0_MX23_YM | LRADC_CTRL0_MX23_XM | \ - LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XP) - -#define LRADC_CTRL1 0x10 -#define LRADC_CTRL1_TOUCH_DETECT_IRQ_EN BIT(24) -#define LRADC_CTRL1_LRADC_IRQ_EN(n) (1 << ((n) + 16)) -#define LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK (0x1fff << 16) -#define LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK (0x01ff << 16) -#define LRADC_CTRL1_LRADC_IRQ_EN_OFFSET 16 -#define LRADC_CTRL1_TOUCH_DETECT_IRQ BIT(8) -#define LRADC_CTRL1_LRADC_IRQ(n) (1 << (n)) -#define LRADC_CTRL1_MX28_LRADC_IRQ_MASK 0x1fff -#define LRADC_CTRL1_MX23_LRADC_IRQ_MASK 0x01ff -#define LRADC_CTRL1_LRADC_IRQ_OFFSET 0 - -#define LRADC_CTRL2 0x20 -#define LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET 24 -#define LRADC_CTRL2_TEMPSENSE_PWD BIT(15) - -#define LRADC_STATUS 0x40 -#define LRADC_STATUS_TOUCH_DETECT_RAW BIT(0) - -#define LRADC_CH(n) (0x50 + (0x10 * (n))) -#define LRADC_CH_ACCUMULATE BIT(29) -#define LRADC_CH_NUM_SAMPLES_MASK (0x1f << 24) -#define LRADC_CH_NUM_SAMPLES_OFFSET 24 -#define LRADC_CH_NUM_SAMPLES(x) \ - ((x) << LRADC_CH_NUM_SAMPLES_OFFSET) -#define LRADC_CH_VALUE_MASK 0x3ffff -#define LRADC_CH_VALUE_OFFSET 0 - -#define LRADC_DELAY(n) (0xd0 + (0x10 * (n))) -#define LRADC_DELAY_TRIGGER_LRADCS_MASK (0xffUL << 24) -#define LRADC_DELAY_TRIGGER_LRADCS_OFFSET 24 -#define LRADC_DELAY_TRIGGER(x) \ - (((x) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) & \ - LRADC_DELAY_TRIGGER_LRADCS_MASK) -#define LRADC_DELAY_KICK BIT(20) -#define LRADC_DELAY_TRIGGER_DELAYS_MASK (0xf << 16) -#define LRADC_DELAY_TRIGGER_DELAYS_OFFSET 16 -#define LRADC_DELAY_TRIGGER_DELAYS(x) \ - (((x) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) & \ - LRADC_DELAY_TRIGGER_DELAYS_MASK) -#define LRADC_DELAY_LOOP_COUNT_MASK (0x1f << 11) -#define LRADC_DELAY_LOOP_COUNT_OFFSET 11 -#define LRADC_DELAY_LOOP(x) \ - (((x) << LRADC_DELAY_LOOP_COUNT_OFFSET) & \ - LRADC_DELAY_LOOP_COUNT_MASK) -#define LRADC_DELAY_DELAY_MASK 0x7ff -#define LRADC_DELAY_DELAY_OFFSET 0 -#define LRADC_DELAY_DELAY(x) \ - (((x) << LRADC_DELAY_DELAY_OFFSET) & \ - LRADC_DELAY_DELAY_MASK) - -#define LRADC_CTRL4 0x140 -#define LRADC_CTRL4_LRADCSELECT_MASK(n) (0xf << ((n) * 4)) -#define LRADC_CTRL4_LRADCSELECT_OFFSET(n) ((n) * 4) -#define LRADC_CTRL4_LRADCSELECT(n, x) \ - (((x) << LRADC_CTRL4_LRADCSELECT_OFFSET(n)) & \ - LRADC_CTRL4_LRADCSELECT_MASK(n)) - -#define LRADC_RESOLUTION 12 -#define LRADC_SINGLE_SAMPLE_MASK ((1 << LRADC_RESOLUTION) - 1) - -static void mxs_lradc_reg_set(struct mxs_lradc *lradc, u32 val, u32 reg) -{ - writel(val, lradc->base + reg + STMP_OFFSET_REG_SET); -} - -static void mxs_lradc_reg_clear(struct mxs_lradc *lradc, u32 val, u32 reg) -{ - writel(val, lradc->base + reg + STMP_OFFSET_REG_CLR); -} - -static void mxs_lradc_reg_wrt(struct mxs_lradc *lradc, u32 val, u32 reg) -{ - writel(val, lradc->base + reg); -} - -static u32 mxs_lradc_plate_mask(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL0_MX23_PLATE_MASK; - return LRADC_CTRL0_MX28_PLATE_MASK; -} - -static u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL1_MX23_LRADC_IRQ_MASK; - return LRADC_CTRL1_MX28_LRADC_IRQ_MASK; -} - -static u32 mxs_lradc_touch_detect_bit(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE; - return LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE; -} - -static u32 mxs_lradc_drive_x_plate(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL0_MX23_XP | LRADC_CTRL0_MX23_XM; - return LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW; -} - -static u32 mxs_lradc_drive_y_plate(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_YM; - return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW; -} - -static u32 mxs_lradc_drive_pressure(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XM; - return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW; -} - -static bool mxs_lradc_check_touch_event(struct mxs_lradc *lradc) -{ - return !!(readl(lradc->base + LRADC_STATUS) & - LRADC_STATUS_TOUCH_DETECT_RAW); -} - -static void mxs_lradc_map_channel(struct mxs_lradc *lradc, unsigned vch, - unsigned ch) -{ - mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(vch), - LRADC_CTRL4); - mxs_lradc_reg_set(lradc, LRADC_CTRL4_LRADCSELECT(vch, ch), LRADC_CTRL4); -} - -static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch) -{ - /* - * prepare for oversampling conversion - * - * from the datasheet: - * "The ACCUMULATE bit in the appropriate channel register - * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0; - * otherwise, the IRQs will not fire." - */ - mxs_lradc_reg_wrt(lradc, LRADC_CH_ACCUMULATE | - LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1), - LRADC_CH(ch)); - - /* - * from the datasheet: - * "Software must clear this register in preparation for a - * multi-cycle accumulation. - */ - mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch)); - - /* - * prepare the delay/loop unit according to the oversampling count - * - * from the datasheet: - * "The DELAY fields in HW_LRADC_DELAY0, HW_LRADC_DELAY1, - * HW_LRADC_DELAY2, and HW_LRADC_DELAY3 must be non-zero; otherwise, - * the LRADC will not trigger the delay group." - */ - mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << ch) | - LRADC_DELAY_TRIGGER_DELAYS(0) | - LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) | - LRADC_DELAY_DELAY(lradc->over_sample_delay - 1), - LRADC_DELAY(3)); - - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch), LRADC_CTRL1); - - /* - * after changing the touchscreen plates setting - * the signals need some initial time to settle. Start the - * SoC's delay unit and start the conversion later - * and automatically. - */ - mxs_lradc_reg_wrt( - lradc, - LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */ - LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */ - LRADC_DELAY_KICK | - LRADC_DELAY_DELAY(lradc->settling_delay), - LRADC_DELAY(2)); -} - -/* - * Pressure detection is special: - * We want to do both required measurements for the pressure detection in - * one turn. Use the hardware features to chain both conversions and let the - * hardware report one interrupt if both conversions are done - */ -static void mxs_lradc_setup_ts_pressure(struct mxs_lradc *lradc, unsigned ch1, - unsigned ch2) -{ - u32 reg; - - /* - * prepare for oversampling conversion - * - * from the datasheet: - * "The ACCUMULATE bit in the appropriate channel register - * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0; - * otherwise, the IRQs will not fire." - */ - reg = LRADC_CH_ACCUMULATE | - LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1); - mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch1)); - mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch2)); - - /* - * from the datasheet: - * "Software must clear this register in preparation for a - * multi-cycle accumulation. - */ - mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch1)); - mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch2)); - - /* prepare the delay/loop unit according to the oversampling count */ - mxs_lradc_reg_wrt( - lradc, - LRADC_DELAY_TRIGGER(1 << ch1) | - LRADC_DELAY_TRIGGER(1 << ch2) | /* start both channels */ - LRADC_DELAY_TRIGGER_DELAYS(0) | - LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) | - LRADC_DELAY_DELAY(lradc->over_sample_delay - 1), - LRADC_DELAY(3)); - - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch2), LRADC_CTRL1); - - /* - * after changing the touchscreen plates setting - * the signals need some initial time to settle. Start the - * SoC's delay unit and start the conversion later - * and automatically. - */ - mxs_lradc_reg_wrt( - lradc, - LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */ - LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */ - LRADC_DELAY_KICK | - LRADC_DELAY_DELAY(lradc->settling_delay), LRADC_DELAY(2)); -} - -static unsigned mxs_lradc_read_raw_channel(struct mxs_lradc *lradc, - unsigned channel) -{ - u32 reg; - unsigned num_samples, val; - - reg = readl(lradc->base + LRADC_CH(channel)); - if (reg & LRADC_CH_ACCUMULATE) - num_samples = lradc->over_sample_cnt; - else - num_samples = 1; - - val = (reg & LRADC_CH_VALUE_MASK) >> LRADC_CH_VALUE_OFFSET; - return val / num_samples; -} - -static unsigned mxs_lradc_read_ts_pressure(struct mxs_lradc *lradc, - unsigned ch1, unsigned ch2) -{ - u32 reg, mask; - unsigned pressure, m1, m2; - - mask = LRADC_CTRL1_LRADC_IRQ(ch1) | LRADC_CTRL1_LRADC_IRQ(ch2); - reg = readl(lradc->base + LRADC_CTRL1) & mask; - - while (reg != mask) { - reg = readl(lradc->base + LRADC_CTRL1) & mask; - dev_dbg(lradc->dev, "One channel is still busy: %X\n", reg); - } - - m1 = mxs_lradc_read_raw_channel(lradc, ch1); - m2 = mxs_lradc_read_raw_channel(lradc, ch2); - - if (m2 == 0) { - dev_warn(lradc->dev, "Cannot calculate pressure\n"); - return 1 << (LRADC_RESOLUTION - 1); - } - - /* simply scale the value from 0 ... max ADC resolution */ - pressure = m1; - pressure *= (1 << LRADC_RESOLUTION); - pressure /= m2; - - dev_dbg(lradc->dev, "Pressure = %u\n", pressure); - return pressure; -} - -#define TS_CH_XP 2 -#define TS_CH_YP 3 -#define TS_CH_XM 4 -#define TS_CH_YM 5 - -/* - * YP(open)--+-------------+ - * | |--+ - * | | | - * YM(-)--+-------------+ | - * +--------------+ - * | | - * XP(weak+) XM(open) - * - * "weak+" means 200k Ohm VDDIO - * (-) means GND - */ -static void mxs_lradc_setup_touch_detection(struct mxs_lradc *lradc) -{ - /* - * In order to detect a touch event the 'touch detect enable' bit - * enables: - * - a weak pullup to the X+ connector - * - a strong ground at the Y- connector - */ - mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); - mxs_lradc_reg_set(lradc, mxs_lradc_touch_detect_bit(lradc), - LRADC_CTRL0); -} - -/* - * YP(meas)--+-------------+ - * | |--+ - * | | | - * YM(open)--+-------------+ | - * +--------------+ - * | | - * XP(+) XM(-) - * - * (+) means here 1.85 V - * (-) means here GND - */ -static void mxs_lradc_prepare_x_pos(struct mxs_lradc *lradc) -{ - mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); - mxs_lradc_reg_set(lradc, mxs_lradc_drive_x_plate(lradc), LRADC_CTRL0); - - lradc->cur_plate = LRADC_SAMPLE_X; - mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YP); - mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1); -} - -/* - * YP(+)--+-------------+ - * | |--+ - * | | | - * YM(-)--+-------------+ | - * +--------------+ - * | | - * XP(open) XM(meas) - * - * (+) means here 1.85 V - * (-) means here GND - */ -static void mxs_lradc_prepare_y_pos(struct mxs_lradc *lradc) -{ - mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); - mxs_lradc_reg_set(lradc, mxs_lradc_drive_y_plate(lradc), LRADC_CTRL0); - - lradc->cur_plate = LRADC_SAMPLE_Y; - mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_XM); - mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1); -} - -/* - * YP(+)--+-------------+ - * | |--+ - * | | | - * YM(meas)--+-------------+ | - * +--------------+ - * | | - * XP(meas) XM(-) - * - * (+) means here 1.85 V - * (-) means here GND - */ -static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc) -{ - mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); - mxs_lradc_reg_set(lradc, mxs_lradc_drive_pressure(lradc), LRADC_CTRL0); - - lradc->cur_plate = LRADC_SAMPLE_PRESSURE; - mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YM); - mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL2, TS_CH_XP); - mxs_lradc_setup_ts_pressure(lradc, TOUCHSCREEN_VCHANNEL2, - TOUCHSCREEN_VCHANNEL1); -} - -static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc) -{ - /* Configure the touchscreen type */ - if (lradc->soc == IMX28_LRADC) { - mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, - LRADC_CTRL0); - - if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) - mxs_lradc_reg_set(lradc, - LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, - LRADC_CTRL0); - } - - mxs_lradc_setup_touch_detection(lradc); - - lradc->cur_plate = LRADC_TOUCH; - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ | - LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); - mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); -} - -static void mxs_lradc_start_touch_event(struct mxs_lradc *lradc) -{ - mxs_lradc_reg_clear(lradc, - LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, - LRADC_CTRL1); - mxs_lradc_reg_set(lradc, - LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1), - LRADC_CTRL1); - /* - * start with the Y-pos, because it uses nearly the same plate - * settings like the touch detection - */ - mxs_lradc_prepare_y_pos(lradc); -} - -static void mxs_lradc_report_ts_event(struct mxs_lradc *lradc) -{ - input_report_abs(lradc->ts_input, ABS_X, lradc->ts_x_pos); - input_report_abs(lradc->ts_input, ABS_Y, lradc->ts_y_pos); - input_report_abs(lradc->ts_input, ABS_PRESSURE, lradc->ts_pressure); - input_report_key(lradc->ts_input, BTN_TOUCH, 1); - input_sync(lradc->ts_input); -} - -static void mxs_lradc_complete_touch_event(struct mxs_lradc *lradc) -{ - mxs_lradc_setup_touch_detection(lradc); - lradc->cur_plate = LRADC_SAMPLE_VALID; - /* - * start a dummy conversion to burn time to settle the signals - * note: we are not interested in the conversion's value - */ - mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(TOUCHSCREEN_VCHANNEL1)); - mxs_lradc_reg_clear(lradc, - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2), - LRADC_CTRL1); - mxs_lradc_reg_wrt( - lradc, - LRADC_DELAY_TRIGGER(1 << TOUCHSCREEN_VCHANNEL1) | - LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10), /* waste 5 ms */ - LRADC_DELAY(2)); -} - -/* - * in order to avoid false measurements, report only samples where - * the surface is still touched after the position measurement - */ -static void mxs_lradc_finish_touch_event(struct mxs_lradc *lradc, bool valid) -{ - /* if it is still touched, report the sample */ - if (valid && mxs_lradc_check_touch_event(lradc)) { - lradc->ts_valid = true; - mxs_lradc_report_ts_event(lradc); - } - - /* if it is even still touched, continue with the next measurement */ - if (mxs_lradc_check_touch_event(lradc)) { - mxs_lradc_prepare_y_pos(lradc); - return; - } - - if (lradc->ts_valid) { - /* signal the release */ - lradc->ts_valid = false; - input_report_key(lradc->ts_input, BTN_TOUCH, 0); - input_sync(lradc->ts_input); - } - - /* if it is released, wait for the next touch via IRQ */ - lradc->cur_plate = LRADC_TOUCH; - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); - mxs_lradc_reg_clear(lradc, - LRADC_CTRL1_TOUCH_DETECT_IRQ | - LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) | - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1), - LRADC_CTRL1); - mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); -} - -/* touchscreen's state machine */ -static void mxs_lradc_handle_touch(struct mxs_lradc *lradc) -{ - switch (lradc->cur_plate) { - case LRADC_TOUCH: - if (mxs_lradc_check_touch_event(lradc)) - mxs_lradc_start_touch_event(lradc); - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ, - LRADC_CTRL1); - return; - - case LRADC_SAMPLE_Y: - lradc->ts_y_pos = - mxs_lradc_read_raw_channel(lradc, - TOUCHSCREEN_VCHANNEL1); - mxs_lradc_prepare_x_pos(lradc); - return; - - case LRADC_SAMPLE_X: - lradc->ts_x_pos = - mxs_lradc_read_raw_channel(lradc, - TOUCHSCREEN_VCHANNEL1); - mxs_lradc_prepare_pressure(lradc); - return; - - case LRADC_SAMPLE_PRESSURE: - lradc->ts_pressure = - mxs_lradc_read_ts_pressure(lradc, - TOUCHSCREEN_VCHANNEL2, - TOUCHSCREEN_VCHANNEL1); - mxs_lradc_complete_touch_event(lradc); - return; - - case LRADC_SAMPLE_VALID: - mxs_lradc_finish_touch_event(lradc, 1); - break; - } -} - -/* - * Raw I/O operations - */ -static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val) -{ - struct mxs_lradc *lradc = iio_priv(iio_dev); - int ret; - - /* - * See if there is no buffered operation in progress. If there is, simply - * bail out. This can be improved to support both buffered and raw IO at - * the same time, yet the code becomes horribly complicated. Therefore I - * applied KISS principle here. - */ - ret = mutex_trylock(&lradc->lock); - if (!ret) - return -EBUSY; - - reinit_completion(&lradc->completion); - - /* - * No buffered operation in progress, map the channel and trigger it. - * Virtual channel 0 is always used here as the others are always not - * used if doing raw sampling. - */ - if (lradc->soc == IMX28_LRADC) - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), - LRADC_CTRL1); - mxs_lradc_reg_clear(lradc, 0x1, LRADC_CTRL0); - - /* Enable / disable the divider per requirement */ - if (test_bit(chan, &lradc->is_divided)) - mxs_lradc_reg_set(lradc, - 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, - LRADC_CTRL2); - else - mxs_lradc_reg_clear(lradc, - 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, - LRADC_CTRL2); - - /* Clean the slot's previous content, then set new one. */ - mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(0), - LRADC_CTRL4); - mxs_lradc_reg_set(lradc, chan, LRADC_CTRL4); - - mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(0)); - - /* Enable the IRQ and start sampling the channel. */ - mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1); - mxs_lradc_reg_set(lradc, BIT(0), LRADC_CTRL0); - - /* Wait for completion on the channel, 1 second max. */ - ret = wait_for_completion_killable_timeout(&lradc->completion, HZ); - if (!ret) - ret = -ETIMEDOUT; - if (ret < 0) - goto err; - - /* Read the data. */ - *val = readl(lradc->base + LRADC_CH(0)) & LRADC_CH_VALUE_MASK; - ret = IIO_VAL_INT; - -err: - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1); - - mutex_unlock(&lradc->lock); - - return ret; -} - -static int mxs_lradc_read_temp(struct iio_dev *iio_dev, int *val) -{ - int ret, min, max; - - ret = mxs_lradc_read_single(iio_dev, 8, &min); - if (ret != IIO_VAL_INT) - return ret; - - ret = mxs_lradc_read_single(iio_dev, 9, &max); - if (ret != IIO_VAL_INT) - return ret; - - *val = max - min; - - return IIO_VAL_INT; -} - -static int mxs_lradc_read_raw(struct iio_dev *iio_dev, - const struct iio_chan_spec *chan, - int *val, int *val2, long m) -{ - struct mxs_lradc *lradc = iio_priv(iio_dev); - - switch (m) { - case IIO_CHAN_INFO_RAW: - if (chan->type == IIO_TEMP) - return mxs_lradc_read_temp(iio_dev, val); - - return mxs_lradc_read_single(iio_dev, chan->channel, val); - - case IIO_CHAN_INFO_SCALE: - if (chan->type == IIO_TEMP) { - /* - * From the datasheet, we have to multiply by 1.012 and - * divide by 4 - */ - *val = 0; - *val2 = 253000; - return IIO_VAL_INT_PLUS_MICRO; - } - - *val = lradc->vref_mv[chan->channel]; - *val2 = chan->scan_type.realbits - - test_bit(chan->channel, &lradc->is_divided); - return IIO_VAL_FRACTIONAL_LOG2; - - case IIO_CHAN_INFO_OFFSET: - if (chan->type == IIO_TEMP) { - /* - * The calculated value from the ADC is in Kelvin, we - * want Celsius for hwmon so the offset is -273.15 - * The offset is applied before scaling so it is - * actually -213.15 * 4 / 1.012 = -1079.644268 - */ - *val = -1079; - *val2 = 644268; - - return IIO_VAL_INT_PLUS_MICRO; - } - - return -EINVAL; - - default: - break; - } - - return -EINVAL; -} - -static int mxs_lradc_write_raw(struct iio_dev *iio_dev, - const struct iio_chan_spec *chan, - int val, int val2, long m) -{ - struct mxs_lradc *lradc = iio_priv(iio_dev); - struct mxs_lradc_scale *scale_avail = - lradc->scale_avail[chan->channel]; - int ret; - - ret = mutex_trylock(&lradc->lock); - if (!ret) - return -EBUSY; - - switch (m) { - case IIO_CHAN_INFO_SCALE: - ret = -EINVAL; - if (val == scale_avail[MXS_LRADC_DIV_DISABLED].integer && - val2 == scale_avail[MXS_LRADC_DIV_DISABLED].nano) { - /* divider by two disabled */ - clear_bit(chan->channel, &lradc->is_divided); - ret = 0; - } else if (val == scale_avail[MXS_LRADC_DIV_ENABLED].integer && - val2 == scale_avail[MXS_LRADC_DIV_ENABLED].nano) { - /* divider by two enabled */ - set_bit(chan->channel, &lradc->is_divided); - ret = 0; - } - - break; - default: - ret = -EINVAL; - break; - } - - mutex_unlock(&lradc->lock); - - return ret; -} - -static int mxs_lradc_write_raw_get_fmt(struct iio_dev *iio_dev, - const struct iio_chan_spec *chan, - long m) -{ - return IIO_VAL_INT_PLUS_NANO; -} - -static ssize_t mxs_lradc_show_scale_available_ch(struct device *dev, - struct device_attribute *attr, - char *buf, - int ch) -{ - struct iio_dev *iio = dev_to_iio_dev(dev); - struct mxs_lradc *lradc = iio_priv(iio); - int i, len = 0; - - for (i = 0; i < ARRAY_SIZE(lradc->scale_avail[ch]); i++) - len += sprintf(buf + len, "%u.%09u ", - lradc->scale_avail[ch][i].integer, - lradc->scale_avail[ch][i].nano); - - len += sprintf(buf + len, "\n"); - - return len; -} - -static ssize_t mxs_lradc_show_scale_available(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev_attr *iio_attr = to_iio_dev_attr(attr); - - return mxs_lradc_show_scale_available_ch(dev, attr, buf, - iio_attr->address); -} - -#define SHOW_SCALE_AVAILABLE_ATTR(ch) \ -static IIO_DEVICE_ATTR(in_voltage##ch##_scale_available, S_IRUGO, \ - mxs_lradc_show_scale_available, NULL, ch) - -SHOW_SCALE_AVAILABLE_ATTR(0); -SHOW_SCALE_AVAILABLE_ATTR(1); -SHOW_SCALE_AVAILABLE_ATTR(2); -SHOW_SCALE_AVAILABLE_ATTR(3); -SHOW_SCALE_AVAILABLE_ATTR(4); -SHOW_SCALE_AVAILABLE_ATTR(5); -SHOW_SCALE_AVAILABLE_ATTR(6); -SHOW_SCALE_AVAILABLE_ATTR(7); -SHOW_SCALE_AVAILABLE_ATTR(10); -SHOW_SCALE_AVAILABLE_ATTR(11); -SHOW_SCALE_AVAILABLE_ATTR(12); -SHOW_SCALE_AVAILABLE_ATTR(13); -SHOW_SCALE_AVAILABLE_ATTR(14); -SHOW_SCALE_AVAILABLE_ATTR(15); - -static struct attribute *mxs_lradc_attributes[] = { - &iio_dev_attr_in_voltage0_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage1_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage2_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage3_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage4_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage5_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage6_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage7_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage10_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage11_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage12_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage13_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage14_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage15_scale_available.dev_attr.attr, - NULL -}; - -static const struct attribute_group mxs_lradc_attribute_group = { - .attrs = mxs_lradc_attributes, -}; - -static const struct iio_info mxs_lradc_iio_info = { - .driver_module = THIS_MODULE, - .read_raw = mxs_lradc_read_raw, - .write_raw = mxs_lradc_write_raw, - .write_raw_get_fmt = mxs_lradc_write_raw_get_fmt, - .attrs = &mxs_lradc_attribute_group, -}; - -static int mxs_lradc_ts_open(struct input_dev *dev) -{ - struct mxs_lradc *lradc = input_get_drvdata(dev); - - /* Enable the touch-detect circuitry. */ - mxs_lradc_enable_touch_detection(lradc); - - return 0; -} - -static void mxs_lradc_disable_ts(struct mxs_lradc *lradc) -{ - /* stop all interrupts from firing */ - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN | - LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) | - LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1); - - /* Power-down touchscreen touch-detect circuitry. */ - mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); -} - -static void mxs_lradc_ts_close(struct input_dev *dev) -{ - struct mxs_lradc *lradc = input_get_drvdata(dev); - - mxs_lradc_disable_ts(lradc); -} - -static int mxs_lradc_ts_register(struct mxs_lradc *lradc) -{ - struct input_dev *input; - struct device *dev = lradc->dev; - - if (!lradc->use_touchscreen) - return 0; - - input = devm_input_allocate_device(dev); - if (!input) - return -ENOMEM; - - input->name = DRIVER_NAME; - input->id.bustype = BUS_HOST; - input->open = mxs_lradc_ts_open; - input->close = mxs_lradc_ts_close; - - __set_bit(EV_ABS, input->evbit); - __set_bit(EV_KEY, input->evbit); - __set_bit(BTN_TOUCH, input->keybit); - __set_bit(INPUT_PROP_DIRECT, input->propbit); - input_set_abs_params(input, ABS_X, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); - input_set_abs_params(input, ABS_Y, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); - input_set_abs_params(input, ABS_PRESSURE, 0, LRADC_SINGLE_SAMPLE_MASK, - 0, 0); - - lradc->ts_input = input; - input_set_drvdata(input, lradc); - - return input_register_device(input); -} - -/* - * IRQ Handling - */ -static irqreturn_t mxs_lradc_handle_irq(int irq, void *data) -{ - struct iio_dev *iio = data; - struct mxs_lradc *lradc = iio_priv(iio); - unsigned long reg = readl(lradc->base + LRADC_CTRL1); - u32 clr_irq = mxs_lradc_irq_mask(lradc); - const u32 ts_irq_mask = - LRADC_CTRL1_TOUCH_DETECT_IRQ | - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2); - - if (!(reg & mxs_lradc_irq_mask(lradc))) - return IRQ_NONE; - - if (lradc->use_touchscreen && (reg & ts_irq_mask)) { - mxs_lradc_handle_touch(lradc); - - /* Make sure we don't clear the next conversion's interrupt. */ - clr_irq &= ~(LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2)); - } - - if (iio_buffer_enabled(iio)) { - if (reg & lradc->buffer_vchans) - iio_trigger_poll(iio->trig); - } else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) { - complete(&lradc->completion); - } - - mxs_lradc_reg_clear(lradc, reg & clr_irq, LRADC_CTRL1); - - return IRQ_HANDLED; -} - -/* - * Trigger handling - */ -static irqreturn_t mxs_lradc_trigger_handler(int irq, void *p) -{ - struct iio_poll_func *pf = p; - struct iio_dev *iio = pf->indio_dev; - struct mxs_lradc *lradc = iio_priv(iio); - const u32 chan_value = LRADC_CH_ACCUMULATE | - ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); - unsigned int i, j = 0; - - for_each_set_bit(i, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { - lradc->buffer[j] = readl(lradc->base + LRADC_CH(j)); - mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(j)); - lradc->buffer[j] &= LRADC_CH_VALUE_MASK; - lradc->buffer[j] /= LRADC_DELAY_TIMER_LOOP; - j++; - } - - iio_push_to_buffers_with_timestamp(iio, lradc->buffer, pf->timestamp); - - iio_trigger_notify_done(iio->trig); - - return IRQ_HANDLED; -} - -static int mxs_lradc_configure_trigger(struct iio_trigger *trig, bool state) -{ - struct iio_dev *iio = iio_trigger_get_drvdata(trig); - struct mxs_lradc *lradc = iio_priv(iio); - const u32 st = state ? STMP_OFFSET_REG_SET : STMP_OFFSET_REG_CLR; - - mxs_lradc_reg_wrt(lradc, LRADC_DELAY_KICK, LRADC_DELAY(0) + st); - - return 0; -} - -static const struct iio_trigger_ops mxs_lradc_trigger_ops = { - .owner = THIS_MODULE, - .set_trigger_state = &mxs_lradc_configure_trigger, -}; - -static int mxs_lradc_trigger_init(struct iio_dev *iio) -{ - int ret; - struct iio_trigger *trig; - struct mxs_lradc *lradc = iio_priv(iio); - - trig = iio_trigger_alloc("%s-dev%i", iio->name, iio->id); - if (!trig) - return -ENOMEM; - - trig->dev.parent = lradc->dev; - iio_trigger_set_drvdata(trig, iio); - trig->ops = &mxs_lradc_trigger_ops; - - ret = iio_trigger_register(trig); - if (ret) { - iio_trigger_free(trig); - return ret; - } - - lradc->trig = trig; - - return 0; -} - -static void mxs_lradc_trigger_remove(struct iio_dev *iio) -{ - struct mxs_lradc *lradc = iio_priv(iio); - - iio_trigger_unregister(lradc->trig); - iio_trigger_free(lradc->trig); -} - -static int mxs_lradc_buffer_preenable(struct iio_dev *iio) -{ - struct mxs_lradc *lradc = iio_priv(iio); - int ret = 0, chan, ofs = 0; - unsigned long enable = 0; - u32 ctrl4_set = 0; - u32 ctrl4_clr = 0; - u32 ctrl1_irq = 0; - const u32 chan_value = LRADC_CH_ACCUMULATE | - ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); - const int len = bitmap_weight(iio->active_scan_mask, - LRADC_MAX_TOTAL_CHANS); - - if (!len) - return -EINVAL; - - /* - * Lock the driver so raw access can not be done during buffered - * operation. This simplifies the code a lot. - */ - ret = mutex_trylock(&lradc->lock); - if (!ret) - return -EBUSY; - - lradc->buffer = kmalloc_array(len, sizeof(*lradc->buffer), GFP_KERNEL); - if (!lradc->buffer) { - ret = -ENOMEM; - goto err_mem; - } - - if (lradc->soc == IMX28_LRADC) - mxs_lradc_reg_clear( - lradc, - lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, - LRADC_CTRL1); - mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0); - - for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { - ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs); - ctrl4_clr |= LRADC_CTRL4_LRADCSELECT_MASK(ofs); - ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs); - mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(ofs)); - bitmap_set(&enable, ofs, 1); - ofs++; - } - - mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK | - LRADC_DELAY_KICK, LRADC_DELAY(0)); - mxs_lradc_reg_clear(lradc, ctrl4_clr, LRADC_CTRL4); - mxs_lradc_reg_set(lradc, ctrl4_set, LRADC_CTRL4); - mxs_lradc_reg_set(lradc, ctrl1_irq, LRADC_CTRL1); - mxs_lradc_reg_set(lradc, enable << LRADC_DELAY_TRIGGER_LRADCS_OFFSET, - LRADC_DELAY(0)); - - return 0; - -err_mem: - mutex_unlock(&lradc->lock); - return ret; -} - -static int mxs_lradc_buffer_postdisable(struct iio_dev *iio) -{ - struct mxs_lradc *lradc = iio_priv(iio); - - mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK | - LRADC_DELAY_KICK, LRADC_DELAY(0)); - - mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0); - if (lradc->soc == IMX28_LRADC) - mxs_lradc_reg_clear( - lradc, - lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, - LRADC_CTRL1); - - kfree(lradc->buffer); - mutex_unlock(&lradc->lock); - - return 0; -} - -static bool mxs_lradc_validate_scan_mask(struct iio_dev *iio, - const unsigned long *mask) -{ - struct mxs_lradc *lradc = iio_priv(iio); - const int map_chans = bitmap_weight(mask, LRADC_MAX_TOTAL_CHANS); - int rsvd_chans = 0; - unsigned long rsvd_mask = 0; - - if (lradc->use_touchbutton) - rsvd_mask |= CHAN_MASK_TOUCHBUTTON; - if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_4WIRE) - rsvd_mask |= CHAN_MASK_TOUCHSCREEN_4WIRE; - if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) - rsvd_mask |= CHAN_MASK_TOUCHSCREEN_5WIRE; - - if (lradc->use_touchbutton) - rsvd_chans++; - if (lradc->use_touchscreen) - rsvd_chans += 2; - - /* Test for attempts to map channels with special mode of operation. */ - if (bitmap_intersects(mask, &rsvd_mask, LRADC_MAX_TOTAL_CHANS)) - return false; - - /* Test for attempts to map more channels then available slots. */ - if (map_chans + rsvd_chans > LRADC_MAX_MAPPED_CHANS) - return false; - - return true; -} - -static const struct iio_buffer_setup_ops mxs_lradc_buffer_ops = { - .preenable = &mxs_lradc_buffer_preenable, - .postenable = &iio_triggered_buffer_postenable, - .predisable = &iio_triggered_buffer_predisable, - .postdisable = &mxs_lradc_buffer_postdisable, - .validate_scan_mask = &mxs_lradc_validate_scan_mask, -}; - -/* - * Driver initialization - */ - -#define MXS_ADC_CHAN(idx, chan_type, name) { \ - .type = (chan_type), \ - .indexed = 1, \ - .scan_index = (idx), \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ - BIT(IIO_CHAN_INFO_SCALE), \ - .channel = (idx), \ - .address = (idx), \ - .scan_type = { \ - .sign = 'u', \ - .realbits = LRADC_RESOLUTION, \ - .storagebits = 32, \ - }, \ - .datasheet_name = (name), \ -} - -static const struct iio_chan_spec mx23_lradc_chan_spec[] = { - MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"), - MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"), - MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"), - MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"), - MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"), - MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"), - MXS_ADC_CHAN(6, IIO_VOLTAGE, "VDDIO"), - MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"), - /* Combined Temperature sensors */ - { - .type = IIO_TEMP, - .indexed = 1, - .scan_index = 8, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_OFFSET) | - BIT(IIO_CHAN_INFO_SCALE), - .channel = 8, - .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, - .datasheet_name = "TEMP_DIE", - }, - /* Hidden channel to keep indexes */ - { - .type = IIO_TEMP, - .indexed = 1, - .scan_index = -1, - .channel = 9, - }, - MXS_ADC_CHAN(10, IIO_VOLTAGE, NULL), - MXS_ADC_CHAN(11, IIO_VOLTAGE, NULL), - MXS_ADC_CHAN(12, IIO_VOLTAGE, "USB_DP"), - MXS_ADC_CHAN(13, IIO_VOLTAGE, "USB_DN"), - MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"), - MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), -}; - -static const struct iio_chan_spec mx28_lradc_chan_spec[] = { - MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"), - MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"), - MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"), - MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"), - MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"), - MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"), - MXS_ADC_CHAN(6, IIO_VOLTAGE, "LRADC6"), - MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"), - /* Combined Temperature sensors */ - { - .type = IIO_TEMP, - .indexed = 1, - .scan_index = 8, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_OFFSET) | - BIT(IIO_CHAN_INFO_SCALE), - .channel = 8, - .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, - .datasheet_name = "TEMP_DIE", - }, - /* Hidden channel to keep indexes */ - { - .type = IIO_TEMP, - .indexed = 1, - .scan_index = -1, - .channel = 9, - }, - MXS_ADC_CHAN(10, IIO_VOLTAGE, "VDDIO"), - MXS_ADC_CHAN(11, IIO_VOLTAGE, "VTH"), - MXS_ADC_CHAN(12, IIO_VOLTAGE, "VDDA"), - MXS_ADC_CHAN(13, IIO_VOLTAGE, "VDDD"), - MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"), - MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), -}; - -static void mxs_lradc_hw_init(struct mxs_lradc *lradc) -{ - /* The ADC always uses DELAY CHANNEL 0. */ - const u32 adc_cfg = - (1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) | - (LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET); - - /* Configure DELAY CHANNEL 0 for generic ADC sampling. */ - mxs_lradc_reg_wrt(lradc, adc_cfg, LRADC_DELAY(0)); - - /* Disable remaining DELAY CHANNELs */ - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(1)); - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); - - /* Start internal temperature sensing. */ - mxs_lradc_reg_wrt(lradc, 0, LRADC_CTRL2); -} - -static void mxs_lradc_hw_stop(struct mxs_lradc *lradc) -{ - int i; - - mxs_lradc_reg_clear(lradc, - lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, - LRADC_CTRL1); - - for (i = 0; i < LRADC_MAX_DELAY_CHANS; i++) - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(i)); -} - -static const struct of_device_id mxs_lradc_dt_ids[] = { - { .compatible = "fsl,imx23-lradc", .data = (void *)IMX23_LRADC, }, - { .compatible = "fsl,imx28-lradc", .data = (void *)IMX28_LRADC, }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids); - -static int mxs_lradc_probe_touchscreen(struct mxs_lradc *lradc, - struct device_node *lradc_node) -{ - int ret; - u32 ts_wires = 0, adapt; - - ret = of_property_read_u32(lradc_node, "fsl,lradc-touchscreen-wires", - &ts_wires); - if (ret) - return -ENODEV; /* touchscreen feature disabled */ - - switch (ts_wires) { - case 4: - lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_4WIRE; - break; - case 5: - if (lradc->soc == IMX28_LRADC) { - lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_5WIRE; - break; - } - /* fall through an error message for i.MX23 */ - default: - dev_err(lradc->dev, - "Unsupported number of touchscreen wires (%d)\n", - ts_wires); - return -EINVAL; - } - - if (of_property_read_u32(lradc_node, "fsl,ave-ctrl", &adapt)) { - lradc->over_sample_cnt = 4; - } else { - if (adapt < 1 || adapt > 32) { - dev_err(lradc->dev, "Invalid sample count (%u)\n", - adapt); - return -EINVAL; - } - lradc->over_sample_cnt = adapt; - } - - if (of_property_read_u32(lradc_node, "fsl,ave-delay", &adapt)) { - lradc->over_sample_delay = 2; - } else { - if (adapt < 2 || adapt > LRADC_DELAY_DELAY_MASK + 1) { - dev_err(lradc->dev, "Invalid sample delay (%u)\n", - adapt); - return -EINVAL; - } - lradc->over_sample_delay = adapt; - } - - if (of_property_read_u32(lradc_node, "fsl,settling", &adapt)) { - lradc->settling_delay = 10; - } else { - if (adapt < 1 || adapt > LRADC_DELAY_DELAY_MASK) { - dev_err(lradc->dev, "Invalid settling delay (%u)\n", - adapt); - return -EINVAL; - } - lradc->settling_delay = adapt; - } - - return 0; -} - -static int mxs_lradc_probe(struct platform_device *pdev) -{ - const struct of_device_id *of_id = - of_match_device(mxs_lradc_dt_ids, &pdev->dev); - const struct mxs_lradc_of_config *of_cfg = - &mxs_lradc_of_config[(enum mxs_lradc_id)of_id->data]; - struct device *dev = &pdev->dev; - struct device_node *node = dev->of_node; - struct mxs_lradc *lradc; - struct iio_dev *iio; - struct resource *iores; - int ret = 0, touch_ret; - int i, s; - u64 scale_uv; - - /* Allocate the IIO device. */ - iio = devm_iio_device_alloc(dev, sizeof(*lradc)); - if (!iio) { - dev_err(dev, "Failed to allocate IIO device\n"); - return -ENOMEM; - } - - lradc = iio_priv(iio); - lradc->soc = (enum mxs_lradc_id)of_id->data; - - /* Grab the memory area */ - iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); - lradc->dev = &pdev->dev; - lradc->base = devm_ioremap_resource(dev, iores); - if (IS_ERR(lradc->base)) - return PTR_ERR(lradc->base); - - lradc->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(lradc->clk)) { - dev_err(dev, "Failed to get the delay unit clock\n"); - return PTR_ERR(lradc->clk); - } - ret = clk_prepare_enable(lradc->clk); - if (ret != 0) { - dev_err(dev, "Failed to enable the delay unit clock\n"); - return ret; - } - - touch_ret = mxs_lradc_probe_touchscreen(lradc, node); - - if (touch_ret == 0) - lradc->buffer_vchans = BUFFER_VCHANS_LIMITED; - else - lradc->buffer_vchans = BUFFER_VCHANS_ALL; - - /* Grab all IRQ sources */ - for (i = 0; i < of_cfg->irq_count; i++) { - lradc->irq[i] = platform_get_irq(pdev, i); - if (lradc->irq[i] < 0) { - ret = lradc->irq[i]; - goto err_clk; - } - - ret = devm_request_irq(dev, lradc->irq[i], - mxs_lradc_handle_irq, 0, - of_cfg->irq_name[i], iio); - if (ret) - goto err_clk; - } - - lradc->vref_mv = of_cfg->vref_mv; - - platform_set_drvdata(pdev, iio); - - init_completion(&lradc->completion); - mutex_init(&lradc->lock); - - iio->name = pdev->name; - iio->dev.parent = &pdev->dev; - iio->info = &mxs_lradc_iio_info; - iio->modes = INDIO_DIRECT_MODE; - iio->masklength = LRADC_MAX_TOTAL_CHANS; - - if (lradc->soc == IMX23_LRADC) { - iio->channels = mx23_lradc_chan_spec; - iio->num_channels = ARRAY_SIZE(mx23_lradc_chan_spec); - } else { - iio->channels = mx28_lradc_chan_spec; - iio->num_channels = ARRAY_SIZE(mx28_lradc_chan_spec); - } - - ret = iio_triggered_buffer_setup(iio, &iio_pollfunc_store_time, - &mxs_lradc_trigger_handler, - &mxs_lradc_buffer_ops); - if (ret) - goto err_clk; - - ret = mxs_lradc_trigger_init(iio); - if (ret) - goto err_trig; - - /* Populate available ADC input ranges */ - for (i = 0; i < LRADC_MAX_TOTAL_CHANS; i++) { - for (s = 0; s < ARRAY_SIZE(lradc->scale_avail[i]); s++) { - /* - * [s=0] = optional divider by two disabled (default) - * [s=1] = optional divider by two enabled - * - * The scale is calculated by doing: - * Vref >> (realbits - s) - * which multiplies by two on the second component - * of the array. - */ - scale_uv = ((u64)lradc->vref_mv[i] * 100000000) >> - (LRADC_RESOLUTION - s); - lradc->scale_avail[i][s].nano = - do_div(scale_uv, 100000000) * 10; - lradc->scale_avail[i][s].integer = scale_uv; - } - } - - ret = stmp_reset_block(lradc->base); - if (ret) - goto err_dev; - - /* Configure the hardware. */ - mxs_lradc_hw_init(lradc); - - /* Register the touchscreen input device. */ - if (touch_ret == 0) { - ret = mxs_lradc_ts_register(lradc); - if (ret) - goto err_ts_register; - } - - /* Register IIO device. */ - ret = iio_device_register(iio); - if (ret) { - dev_err(dev, "Failed to register IIO device\n"); - return ret; - } - - return 0; - -err_ts_register: - mxs_lradc_hw_stop(lradc); -err_dev: - mxs_lradc_trigger_remove(iio); -err_trig: - iio_triggered_buffer_cleanup(iio); -err_clk: - clk_disable_unprepare(lradc->clk); - return ret; -} - -static int mxs_lradc_remove(struct platform_device *pdev) -{ - struct iio_dev *iio = platform_get_drvdata(pdev); - struct mxs_lradc *lradc = iio_priv(iio); - - iio_device_unregister(iio); - mxs_lradc_hw_stop(lradc); - mxs_lradc_trigger_remove(iio); - iio_triggered_buffer_cleanup(iio); - - clk_disable_unprepare(lradc->clk); - - return 0; -} - -static struct platform_driver mxs_lradc_driver = { - .driver = { - .name = DRIVER_NAME, - .of_match_table = mxs_lradc_dt_ids, - }, - .probe = mxs_lradc_probe, - .remove = mxs_lradc_remove, -}; - -module_platform_driver(mxs_lradc_driver); - -MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); -MODULE_DESCRIPTION("Freescale MXS LRADC driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:" DRIVER_NAME); |