summaryrefslogtreecommitdiff
path: root/drivers/iio/adc/cpcap-adc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/adc/cpcap-adc.c')
-rw-r--r--drivers/iio/adc/cpcap-adc.c108
1 files changed, 76 insertions, 32 deletions
diff --git a/drivers/iio/adc/cpcap-adc.c b/drivers/iio/adc/cpcap-adc.c
index 62d37f8725b8..6e419d5a7c14 100644
--- a/drivers/iio/adc/cpcap-adc.c
+++ b/drivers/iio/adc/cpcap-adc.c
@@ -52,6 +52,10 @@
#define CPCAP_BIT_RAND0 BIT(1) /* Set with CAL_MODE */
#define CPCAP_BIT_ADEN BIT(0) /* Currently unused */
+#define CPCAP_REG_ADCC1_DEFAULTS (CPCAP_BIT_ADEN_AUTO_CLR | \
+ CPCAP_BIT_ADC_CLK_SEL0 | \
+ CPCAP_BIT_RAND1)
+
/* Register CPCAP_REG_ADCC2 bits */
#define CPCAP_BIT_CAL_FACTOR_ENABLE BIT(15) /* Currently unused */
#define CPCAP_BIT_BATDETB_EN BIT(14) /* Currently unused */
@@ -62,7 +66,7 @@
#define CPCAP_BIT_ADC_PS_FACTOR0 BIT(9)
#define CPCAP_BIT_AD4_SELECT BIT(8) /* Currently unused */
#define CPCAP_BIT_ADC_BUSY BIT(7) /* Currently unused */
-#define CPCAP_BIT_THERMBIAS_EN BIT(6) /* Currently unused */
+#define CPCAP_BIT_THERMBIAS_EN BIT(6) /* Bias for AD0_BATTDETB */
#define CPCAP_BIT_ADTRIG_DIS BIT(5) /* Disable interrupt */
#define CPCAP_BIT_LIADC BIT(4) /* Currently unused */
#define CPCAP_BIT_TS_REFEN BIT(3) /* Currently unused */
@@ -70,6 +74,12 @@
#define CPCAP_BIT_TS_M1 BIT(1) /* Currently unused */
#define CPCAP_BIT_TS_M0 BIT(0) /* Currently unused */
+#define CPCAP_REG_ADCC2_DEFAULTS (CPCAP_BIT_AD4_SELECT | \
+ CPCAP_BIT_ADTRIG_DIS | \
+ CPCAP_BIT_LIADC | \
+ CPCAP_BIT_TS_M2 | \
+ CPCAP_BIT_TS_M1)
+
#define CPCAP_MAX_TEMP_LVL 27
#define CPCAP_FOUR_POINT_TWO_ADC 801
#define ST_ADC_CAL_CHRGI_HIGH_THRESHOLD 530
@@ -78,7 +88,7 @@
#define ST_ADC_CAL_BATTI_LOW_THRESHOLD 494
#define ST_ADC_CALIBRATE_DIFF_THRESHOLD 3
-#define CPCAP_ADC_MAX_RETRIES 5 /* Calibration and quirk */
+#define CPCAP_ADC_MAX_RETRIES 5 /* Calibration */
/**
* struct cpcap_adc_ato - timing settings for cpcap adc
@@ -124,10 +134,10 @@ struct cpcap_adc {
*/
enum cpcap_adc_channel {
/* Bank0 channels */
- CPCAP_ADC_AD0_BATTDETB, /* Battery detection */
+ CPCAP_ADC_AD0, /* Battery temperature */
CPCAP_ADC_BATTP, /* Battery voltage */
CPCAP_ADC_VBUS, /* USB VBUS voltage */
- CPCAP_ADC_AD3, /* Battery temperature when charging */
+ CPCAP_ADC_AD3, /* Die temperature when charging */
CPCAP_ADC_BPLUS_AD4, /* Another battery or system voltage */
CPCAP_ADC_CHG_ISENSE, /* Calibrated charge current */
CPCAP_ADC_BATTI, /* Calibrated system current */
@@ -217,7 +227,7 @@ struct cpcap_adc_request {
/* Phasing table for channels. Note that channels 16 & 17 use BATTP and BATTI */
static const struct cpcap_adc_phasing_tbl bank_phasing[] = {
/* Bank0 */
- [CPCAP_ADC_AD0_BATTDETB] = {0, 0x80, 0x80, 0, 1023},
+ [CPCAP_ADC_AD0] = {0, 0x80, 0x80, 0, 1023},
[CPCAP_ADC_BATTP] = {0, 0x80, 0x80, 0, 1023},
[CPCAP_ADC_VBUS] = {0, 0x80, 0x80, 0, 1023},
[CPCAP_ADC_AD3] = {0, 0x80, 0x80, 0, 1023},
@@ -243,7 +253,7 @@ static const struct cpcap_adc_phasing_tbl bank_phasing[] = {
*/
static struct cpcap_adc_conversion_tbl bank_conversion[] = {
/* Bank0 */
- [CPCAP_ADC_AD0_BATTDETB] = {
+ [CPCAP_ADC_AD0] = {
IIO_CHAN_INFO_PROCESSED, 0, 0, 0, 1, 1,
},
[CPCAP_ADC_BATTP] = {
@@ -541,6 +551,15 @@ static void cpcap_adc_setup_bank(struct cpcap_adc *ddata,
return;
switch (req->channel) {
+ case CPCAP_ADC_AD0:
+ value2 |= CPCAP_BIT_THERMBIAS_EN;
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+ CPCAP_BIT_THERMBIAS_EN,
+ value2);
+ if (error)
+ return;
+ usleep_range(800, 1000);
+ break;
case CPCAP_ADC_AD8 ... CPCAP_ADC_TSY2_AD15:
value1 |= CPCAP_BIT_AD_SEL1;
break;
@@ -583,7 +602,8 @@ static void cpcap_adc_setup_bank(struct cpcap_adc *ddata,
error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
CPCAP_BIT_ATOX_PS_FACTOR |
CPCAP_BIT_ADC_PS_FACTOR1 |
- CPCAP_BIT_ADC_PS_FACTOR0,
+ CPCAP_BIT_ADC_PS_FACTOR0 |
+ CPCAP_BIT_THERMBIAS_EN,
value2);
if (error)
return;
@@ -614,27 +634,6 @@ static void cpcap_adc_setup_bank(struct cpcap_adc *ddata,
}
}
-/*
- * Occasionally the ADC does not seem to start and there will be no
- * interrupt. Let's re-init interrupt to prevent the ADC from hanging
- * for the next request. It is unclear why this happens, but the next
- * request will usually work after doing this.
- */
-static void cpcap_adc_quirk_reset_lost_irq(struct cpcap_adc *ddata)
-{
- int error;
-
- dev_info(ddata->dev, "lost ADC irq, attempting to reinit\n");
- disable_irq(ddata->irq);
- error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
- CPCAP_BIT_ADTRIG_DIS,
- CPCAP_BIT_ADTRIG_DIS);
- if (error)
- dev_warn(ddata->dev, "%s reset failed: %i\n",
- __func__, error);
- enable_irq(ddata->irq);
-}
-
static int cpcap_adc_start_bank(struct cpcap_adc *ddata,
struct cpcap_adc_request *req)
{
@@ -652,7 +651,6 @@ static int cpcap_adc_start_bank(struct cpcap_adc *ddata,
return 0;
if (error == 0) {
- cpcap_adc_quirk_reset_lost_irq(ddata);
error = -ETIMEDOUT;
continue;
}
@@ -664,6 +662,21 @@ static int cpcap_adc_start_bank(struct cpcap_adc *ddata,
return error;
}
+static int cpcap_adc_stop_bank(struct cpcap_adc *ddata)
+{
+ int error;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1,
+ 0xffff,
+ CPCAP_REG_ADCC1_DEFAULTS);
+ if (error)
+ return error;
+
+ return regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+ 0xffff,
+ CPCAP_REG_ADCC2_DEFAULTS);
+}
+
static void cpcap_adc_phase(struct cpcap_adc_request *req)
{
const struct cpcap_adc_conversion_tbl *conv_tbl = req->conv_tbl;
@@ -758,7 +771,7 @@ static void cpcap_adc_convert(struct cpcap_adc_request *req)
return;
/* Temperatures use a lookup table instead of conversion table */
- if ((req->channel == CPCAP_ADC_AD0_BATTDETB) ||
+ if ((req->channel == CPCAP_ADC_AD0) ||
(req->channel == CPCAP_ADC_AD3)) {
req->result =
cpcap_adc_table_to_millicelcius(req->result);
@@ -820,7 +833,7 @@ static int cpcap_adc_init_request(struct cpcap_adc_request *req,
req->conv_tbl = bank_conversion;
switch (channel) {
- case CPCAP_ADC_AD0_BATTDETB ... CPCAP_ADC_USB_ID:
+ case CPCAP_ADC_AD0 ... CPCAP_ADC_USB_ID:
req->bank_index = channel;
break;
case CPCAP_ADC_AD8 ... CPCAP_ADC_TSY2_AD15:
@@ -839,6 +852,22 @@ static int cpcap_adc_init_request(struct cpcap_adc_request *req,
return 0;
}
+static int cpcap_adc_read_st_die_temp(struct cpcap_adc *ddata,
+ int addr, int *val)
+{
+ int error;
+
+ error = regmap_read(ddata->reg, addr, val);
+ if (error)
+ return error;
+
+ *val -= 282;
+ *val *= 114;
+ *val += 25000;
+
+ return 0;
+}
+
static int cpcap_adc_read(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
@@ -860,6 +889,9 @@ static int cpcap_adc_read(struct iio_dev *indio_dev,
error = regmap_read(ddata->reg, chan->address, val);
if (error)
goto err_unlock;
+ error = cpcap_adc_stop_bank(ddata);
+ if (error)
+ goto err_unlock;
mutex_unlock(&ddata->lock);
break;
case IIO_CHAN_INFO_PROCESSED:
@@ -867,7 +899,19 @@ static int cpcap_adc_read(struct iio_dev *indio_dev,
error = cpcap_adc_start_bank(ddata, &req);
if (error)
goto err_unlock;
- error = cpcap_adc_read_bank_scaled(ddata, &req);
+ if ((ddata->vendor == CPCAP_VENDOR_ST) &&
+ (chan->channel == CPCAP_ADC_AD3)) {
+ error = cpcap_adc_read_st_die_temp(ddata,
+ chan->address,
+ &req.result);
+ if (error)
+ goto err_unlock;
+ } else {
+ error = cpcap_adc_read_bank_scaled(ddata, &req);
+ if (error)
+ goto err_unlock;
+ }
+ error = cpcap_adc_stop_bank(ddata);
if (error)
goto err_unlock;
mutex_unlock(&ddata->lock);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 20:21:38 +0000