1 files changed, 0 insertions, 248 deletions
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
deleted file mode 100644
index 0d2172b07765..000000000000
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
- *
- * The OPP code in function cpu0_set_target() is reused from
- * drivers/cpufreq/omap-cpufreq.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
-
-#include <linux/clk.h>
-#include <linux/cpu.h>
-#include <linux/cpu_cooling.h>
-#include <linux/cpufreq.h>
-#include <linux/cpumask.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/pm_opp.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/consumer.h>
-#include <linux/slab.h>
-#include <linux/thermal.h>
-
-static unsigned int transition_latency;
-static unsigned int voltage_tolerance; /* in percentage */
-
-static struct device *cpu_dev;
-static struct clk *cpu_clk;
-static struct regulator *cpu_reg;
-static struct cpufreq_frequency_table *freq_table;
-static struct thermal_cooling_device *cdev;
-
-static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index)
-{
-	struct dev_pm_opp *opp;
-	unsigned long volt = 0, volt_old = 0, tol = 0;
-	unsigned int old_freq, new_freq;
-	long freq_Hz, freq_exact;
-	int ret;
-
-	freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
-	if (freq_Hz <= 0)
-		freq_Hz = freq_table[index].frequency * 1000;
-
-	freq_exact = freq_Hz;
-	new_freq = freq_Hz / 1000;
-	old_freq = clk_get_rate(cpu_clk) / 1000;
-
-	if (!IS_ERR(cpu_reg)) {
-		rcu_read_lock();
-		opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz);
-		if (IS_ERR(opp)) {
-			rcu_read_unlock();
-			pr_err("failed to find OPP for %ld\n", freq_Hz);
-			return PTR_ERR(opp);
-		}
-		volt = dev_pm_opp_get_voltage(opp);
-		rcu_read_unlock();
-		tol = volt * voltage_tolerance / 100;
-		volt_old = regulator_get_voltage(cpu_reg);
-	}
-
-	pr_debug("%u MHz, %ld mV --> %u MHz, %ld mV\n",
-		 old_freq / 1000, volt_old ? volt_old / 1000 : -1,
-		 new_freq / 1000, volt ? volt / 1000 : -1);
-
-	/* scaling up?  scale voltage before frequency */
-	if (!IS_ERR(cpu_reg) && new_freq > old_freq) {
-		ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
-		if (ret) {
-			pr_err("failed to scale voltage up: %d\n", ret);
-			return ret;
-		}
-	}
-
-	ret = clk_set_rate(cpu_clk, freq_exact);
-	if (ret) {
-		pr_err("failed to set clock rate: %d\n", ret);
-		if (!IS_ERR(cpu_reg))
-			regulator_set_voltage_tol(cpu_reg, volt_old, tol);
-		return ret;
-	}
-
-	/* scaling down?  scale voltage after frequency */
-	if (!IS_ERR(cpu_reg) && new_freq < old_freq) {
-		ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
-		if (ret) {
-			pr_err("failed to scale voltage down: %d\n", ret);
-			clk_set_rate(cpu_clk, old_freq * 1000);
-		}
-	}
-
-	return ret;
-}
-
-static int cpu0_cpufreq_init(struct cpufreq_policy *policy)
-{
-	policy->clk = cpu_clk;
-	return cpufreq_generic_init(policy, freq_table, transition_latency);
-}
-
-static struct cpufreq_driver cpu0_cpufreq_driver = {
-	.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
-	.verify = cpufreq_generic_frequency_table_verify,
-	.target_index = cpu0_set_target,
-	.get = cpufreq_generic_get,
-	.init = cpu0_cpufreq_init,
-	.name = "generic_cpu0",
-	.attr = cpufreq_generic_attr,
-};
-
-static int cpu0_cpufreq_probe(struct platform_device *pdev)
-{
-	struct device_node *np;
-	int ret;
-
-	cpu_dev = get_cpu_device(0);
-	if (!cpu_dev) {
-		pr_err("failed to get cpu0 device\n");
-		return -ENODEV;
-	}
-
-	np = of_node_get(cpu_dev->of_node);
-	if (!np) {
-		pr_err("failed to find cpu0 node\n");
-		return -ENOENT;
-	}
-
-	cpu_reg = regulator_get_optional(cpu_dev, "cpu0");
-	if (IS_ERR(cpu_reg)) {
-		/*
-		 * If cpu0 regulator supply node is present, but regulator is
-		 * not yet registered, we should try defering probe.
-		 */
-		if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) {
-			dev_dbg(cpu_dev, "cpu0 regulator not ready, retry\n");
-			ret = -EPROBE_DEFER;
-			goto out_put_node;
-		}
-		pr_warn("failed to get cpu0 regulator: %ld\n",
-			PTR_ERR(cpu_reg));
-	}
-
-	cpu_clk = clk_get(cpu_dev, NULL);
-	if (IS_ERR(cpu_clk)) {
-		ret = PTR_ERR(cpu_clk);
-		pr_err("failed to get cpu0 clock: %d\n", ret);
-		goto out_put_reg;
-	}
-
-	/* OPPs might be populated at runtime, don't check for error here */
-	of_init_opp_table(cpu_dev);
-
-	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
-	if (ret) {
-		pr_err("failed to init cpufreq table: %d\n", ret);
-		goto out_put_clk;
-	}
-
-	of_property_read_u32(np, "voltage-tolerance", &voltage_tolerance);
-
-	if (of_property_read_u32(np, "clock-latency", &transition_latency))
-		transition_latency = CPUFREQ_ETERNAL;
-
-	if (!IS_ERR(cpu_reg)) {
-		struct dev_pm_opp *opp;
-		unsigned long min_uV, max_uV;
-		int i;
-
-		/*
-		 * OPP is maintained in order of increasing frequency, and
-		 * freq_table initialised from OPP is therefore sorted in the
-		 * same order.
-		 */
-		for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
-			;
-		rcu_read_lock();
-		opp = dev_pm_opp_find_freq_exact(cpu_dev,
-				freq_table[0].frequency * 1000, true);
-		min_uV = dev_pm_opp_get_voltage(opp);
-		opp = dev_pm_opp_find_freq_exact(cpu_dev,
-				freq_table[i-1].frequency * 1000, true);
-		max_uV = dev_pm_opp_get_voltage(opp);
-		rcu_read_unlock();
-		ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
-		if (ret > 0)
-			transition_latency += ret * 1000;
-	}
-
-	ret = cpufreq_register_driver(&cpu0_cpufreq_driver);
-	if (ret) {
-		pr_err("failed register driver: %d\n", ret);
-		goto out_free_table;
-	}
-
-	/*
-	 * For now, just loading the cooling device;
-	 * thermal DT code takes care of matching them.
-	 */
-	if (of_find_property(np, "#cooling-cells", NULL)) {
-		cdev = of_cpufreq_cooling_register(np, cpu_present_mask);
-		if (IS_ERR(cdev))
-			pr_err("running cpufreq without cooling device: %ld\n",
-			       PTR_ERR(cdev));
-	}
-
-	of_node_put(np);
-	return 0;
-
-out_free_table:
-	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
-out_put_clk:
-	if (!IS_ERR(cpu_clk))
-		clk_put(cpu_clk);
-out_put_reg:
-	if (!IS_ERR(cpu_reg))
-		regulator_put(cpu_reg);
-out_put_node:
-	of_node_put(np);
-	return ret;
-}
-
-static int cpu0_cpufreq_remove(struct platform_device *pdev)
-{
-	cpufreq_cooling_unregister(cdev);
-	cpufreq_unregister_driver(&cpu0_cpufreq_driver);
-	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
-
-	return 0;
-}
-
-static struct platform_driver cpu0_cpufreq_platdrv = {
-	.driver = {
-		.name	= "cpufreq-cpu0",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= cpu0_cpufreq_probe,
-	.remove		= cpu0_cpufreq_remove,
-};
-module_platform_driver(cpu0_cpufreq_platdrv);
-
-MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
-MODULE_DESCRIPTION("Generic CPU0 cpufreq driver");
-MODULE_LICENSE("GPL");