1 files changed, 50 insertions, 36 deletions

diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index fce9082384d6..da92ce0c5da9 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -448,7 +448,6 @@ struct blk_revalidate_zone_args {
 	unsigned long	*conv_zones_bitmap;
 	unsigned long	*seq_zones_wlock;
 	unsigned int	nr_zones;
-	sector_t	zone_sectors;
 	sector_t	sector;
 };
 
@@ -462,38 +461,34 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
 	struct gendisk *disk = args->disk;
 	struct request_queue *q = disk->queue;
 	sector_t capacity = get_capacity(disk);
+	sector_t zone_sectors = q->limits.chunk_sectors;
+
+	/* Check for bad zones and holes in the zone report */
+	if (zone->start != args->sector) {
+		pr_warn("%s: Zone gap at sectors %llu..%llu\n",
+			disk->disk_name, args->sector, zone->start);
+		return -ENODEV;
+	}
+
+	if (zone->start >= capacity || !zone->len) {
+		pr_warn("%s: Invalid zone start %llu, length %llu\n",
+			disk->disk_name, zone->start, zone->len);
+		return -ENODEV;
+	}
 
 	/*
 	 * All zones must have the same size, with the exception on an eventual
 	 * smaller last zone.
 	 */
-	if (zone->start == 0) {
-		if (zone->len == 0 || !is_power_of_2(zone->len)) {
-			pr_warn("%s: Invalid zoned device with non power of two zone size (%llu)\n",
-				disk->disk_name, zone->len);
-			return -ENODEV;
-		}
-
-		args->zone_sectors = zone->len;
-		args->nr_zones = (capacity + zone->len - 1) >> ilog2(zone->len);
-	} else if (zone->start + args->zone_sectors < capacity) {
-		if (zone->len != args->zone_sectors) {
+	if (zone->start + zone->len < capacity) {
+		if (zone->len != zone_sectors) {
 			pr_warn("%s: Invalid zoned device with non constant zone size\n",
 				disk->disk_name);
 			return -ENODEV;
 		}
-	} else {
-		if (zone->len > args->zone_sectors) {
-			pr_warn("%s: Invalid zoned device with larger last zone size\n",
-				disk->disk_name);
-			return -ENODEV;
-		}
-	}
-
-	/* Check for holes in the zone report */
-	if (zone->start != args->sector) {
-		pr_warn("%s: Zone gap at sectors %llu..%llu\n",
-			disk->disk_name, args->sector, zone->start);
+	} else if (zone->len > zone_sectors) {
+		pr_warn("%s: Invalid zoned device with larger last zone size\n",
+			disk->disk_name);
 		return -ENODEV;
 	}
 
@@ -532,11 +527,13 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
  * @disk:	Target disk
  * @update_driver_data:	Callback to update driver data on the frozen disk
  *
- * Helper function for low-level device drivers to (re) allocate and initialize
- * a disk request queue zone bitmaps. This functions should normally be called
- * within the disk ->revalidate method for blk-mq based drivers.  For BIO based
- * drivers only q->nr_zones needs to be updated so that the sysfs exposed value
- * is correct.
+ * Helper function for low-level device drivers to check and (re) allocate and
+ * initialize a disk request queue zone bitmaps. This functions should normally
+ * be called within the disk ->revalidate method for blk-mq based drivers.
+ * Before calling this function, the device driver must already have set the
+ * device zone size (chunk_sector limit) and the max zone append limit.
+ * For BIO based drivers, this function cannot be used. BIO based device drivers
+ * only need to set disk->nr_zones so that the sysfs exposed value is correct.
  * If the @update_driver_data callback function is not NULL, the callback is
  * executed with the device request queue frozen after all zones have been
  * checked.
@@ -545,9 +542,9 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 			      void (*update_driver_data)(struct gendisk *disk))
 {
 	struct request_queue *q = disk->queue;
-	struct blk_revalidate_zone_args args = {
-		.disk		= disk,
-	};
+	sector_t zone_sectors = q->limits.chunk_sectors;
+	sector_t capacity = get_capacity(disk);
+	struct blk_revalidate_zone_args args = { };
 	unsigned int noio_flag;
 	int ret;
 
@@ -556,13 +553,31 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 	if (WARN_ON_ONCE(!queue_is_mq(q)))
 		return -EIO;
 
-	if (!get_capacity(disk))
-		return -EIO;
+	if (!capacity)
+		return -ENODEV;
+
+	/*
+	 * Checks that the device driver indicated a valid zone size and that
+	 * the max zone append limit is set.
+	 */
+	if (!zone_sectors || !is_power_of_2(zone_sectors)) {
+		pr_warn("%s: Invalid non power of two zone size (%llu)\n",
+			disk->disk_name, zone_sectors);
+		return -ENODEV;
+	}
+
+	if (!q->limits.max_zone_append_sectors) {
+		pr_warn("%s: Invalid 0 maximum zone append limit\n",
+			disk->disk_name);
+		return -ENODEV;
+	}
 
 	/*
 	 * Ensure that all memory allocations in this context are done as if
 	 * GFP_NOIO was specified.
 	 */
+	args.disk = disk;
+	args.nr_zones = (capacity + zone_sectors - 1) >> ilog2(zone_sectors);
 	noio_flag = memalloc_noio_save();
 	ret = disk->fops->report_zones(disk, 0, UINT_MAX,
 				       blk_revalidate_zone_cb, &args);
@@ -576,7 +591,7 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 	 * If zones where reported, make sure that the entire disk capacity
 	 * has been checked.
 	 */
-	if (ret > 0 && args.sector != get_capacity(disk)) {
+	if (ret > 0 && args.sector != capacity) {
 		pr_warn("%s: Missing zones from sector %llu\n",
 			disk->disk_name, args.sector);
 		ret = -ENODEV;
@@ -589,7 +604,6 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 	 */
 	blk_mq_freeze_queue(q);
 	if (ret > 0) {
-		blk_queue_chunk_sectors(q, args.zone_sectors);
 		disk->nr_zones = args.nr_zones;
 		swap(disk->seq_zones_wlock, args.seq_zones_wlock);
 		swap(disk->conv_zones_bitmap, args.conv_zones_bitmap);