diff options
Diffstat (limited to 'arch/x86/kernel/hpet.c')
| -rw-r--r-- | arch/x86/kernel/hpet.c | 122 |
1 files changed, 71 insertions, 51 deletions
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 9b5cfcdfc426..acf62fc233da 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -17,7 +17,7 @@ /* FSEC = 10^-15 NSEC = 10^-9 */ -#define FSEC_PER_NSEC 1000000 +#define FSEC_PER_NSEC 1000000L /* * HPET address is set in acpi/boot.c, when an ACPI entry exists @@ -36,26 +36,15 @@ static inline void hpet_writel(unsigned long d, unsigned long a) } #ifdef CONFIG_X86_64 - #include <asm/pgtable.h> - -static inline void hpet_set_mapping(void) -{ - set_fixmap_nocache(FIX_HPET_BASE, hpet_address); - __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); - hpet_virt_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE); -} - -static inline void hpet_clear_mapping(void) -{ - hpet_virt_address = NULL; -} - -#else +#endif static inline void hpet_set_mapping(void) { hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); +#ifdef CONFIG_X86_64 + __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); +#endif } static inline void hpet_clear_mapping(void) @@ -63,7 +52,6 @@ static inline void hpet_clear_mapping(void) iounmap(hpet_virt_address); hpet_virt_address = NULL; } -#endif /* * HPET command line enable / disable @@ -127,13 +115,17 @@ static void hpet_reserve_platform_timers(unsigned long id) hd.hd_phys_address = hpet_address; hd.hd_address = hpet; hd.hd_nirqs = nrtimers; - hd.hd_flags = HPET_DATA_PLATFORM; hpet_reserve_timer(&hd, 0); #ifdef CONFIG_HPET_EMULATE_RTC hpet_reserve_timer(&hd, 1); #endif + /* + * NOTE that hd_irq[] reflects IOAPIC input pins (LEGACY_8254 + * is wrong for i8259!) not the output IRQ. Many BIOS writers + * don't bother configuring *any* comparator interrupts. + */ hd.hd_irq[0] = HPET_LEGACY_8254; hd.hd_irq[1] = HPET_LEGACY_RTC; @@ -206,25 +198,24 @@ static void hpet_enable_legacy_int(void) static void hpet_legacy_clockevent_register(void) { - uint64_t hpet_freq; - /* Start HPET legacy interrupts */ hpet_enable_legacy_int(); /* - * The period is a femto seconds value. We need to calculate the - * scaled math multiplication factor for nanosecond to hpet tick - * conversion. + * The mult factor is defined as (include/linux/clockchips.h) + * mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h) + * hpet_period is in units of femtoseconds (per cycle), so + * mult/2^shift = cyc/ns = 10^6/hpet_period + * mult = (10^6 * 2^shift)/hpet_period + * mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period */ - hpet_freq = 1000000000000000ULL; - do_div(hpet_freq, hpet_period); - hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, - NSEC_PER_SEC, hpet_clockevent.shift); + hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC, + hpet_period, hpet_clockevent.shift); /* Calculate the min / max delta */ hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, &hpet_clockevent); - hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30, - &hpet_clockevent); + /* 5 usec minimum reprogramming delta. */ + hpet_clockevent.min_delta_ns = 5000; /* * Start hpet with the boot cpu mask and make it @@ -283,15 +274,22 @@ static void hpet_legacy_set_mode(enum clock_event_mode mode, } static int hpet_legacy_next_event(unsigned long delta, - struct clock_event_device *evt) + struct clock_event_device *evt) { - unsigned long cnt; + u32 cnt; cnt = hpet_readl(HPET_COUNTER); - cnt += delta; + cnt += (u32) delta; hpet_writel(cnt, HPET_T0_CMP); - return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0; + /* + * We need to read back the CMP register to make sure that + * what we wrote hit the chip before we compare it to the + * counter. + */ + WARN_ON((u32)hpet_readl(HPET_T0_CMP) != cnt); + + return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0; } /* @@ -324,7 +322,7 @@ static struct clocksource clocksource_hpet = { static int hpet_clocksource_register(void) { - u64 tmp, start, now; + u64 start, now; cycle_t t1; /* Start the counter */ @@ -351,21 +349,15 @@ static int hpet_clocksource_register(void) return -ENODEV; } - /* Initialize and register HPET clocksource - * - * hpet period is in femto seconds per cycle - * so we need to convert this to ns/cyc units - * approximated by mult/2^shift - * - * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift - * fsec/cyc * 1ns/1000000fsec * 2^shift = mult - * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult - * (fsec/cyc << shift)/1000000 = mult - * (hpet_period << shift)/FSEC_PER_NSEC = mult + /* + * The definition of mult is (include/linux/clocksource.h) + * mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc + * so we first need to convert hpet_period to ns/cyc units: + * mult/2^shift = ns/cyc = hpet_period/10^6 + * mult = (hpet_period * 2^shift)/10^6 + * mult = (hpet_period << shift)/FSEC_PER_NSEC */ - tmp = (u64)hpet_period << HPET_SHIFT; - do_div(tmp, FSEC_PER_NSEC); - clocksource_hpet.mult = (u32)tmp; + clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT); clocksource_register(&clocksource_hpet); @@ -378,6 +370,7 @@ static int hpet_clocksource_register(void) int __init hpet_enable(void) { unsigned long id; + int i; if (!is_hpet_capable()) return 0; @@ -388,6 +381,29 @@ int __init hpet_enable(void) * Read the period and check for a sane value: */ hpet_period = hpet_readl(HPET_PERIOD); + + /* + * AMD SB700 based systems with spread spectrum enabled use a + * SMM based HPET emulation to provide proper frequency + * setting. The SMM code is initialized with the first HPET + * register access and takes some time to complete. During + * this time the config register reads 0xffffffff. We check + * for max. 1000 loops whether the config register reads a non + * 0xffffffff value to make sure that HPET is up and running + * before we go further. A counting loop is safe, as the HPET + * access takes thousands of CPU cycles. On non SB700 based + * machines this check is only done once and has no side + * effects. + */ + for (i = 0; hpet_readl(HPET_CFG) == 0xFFFFFFFF; i++) { + if (i == 1000) { + printk(KERN_WARNING + "HPET config register value = 0xFFFFFFFF. " + "Disabling HPET\n"); + goto out_nohpet; + } + } + if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD) goto out_nohpet; @@ -487,7 +503,7 @@ void hpet_disable(void) #define RTC_NUM_INTS 1 static unsigned long hpet_rtc_flags; -static unsigned long hpet_prev_update_sec; +static int hpet_prev_update_sec; static struct rtc_time hpet_alarm_time; static unsigned long hpet_pie_count; static unsigned long hpet_t1_cmp; @@ -594,6 +610,9 @@ int hpet_set_rtc_irq_bit(unsigned long bit_mask) hpet_rtc_flags |= bit_mask; + if ((bit_mask & RTC_UIE) && !(oldbits & RTC_UIE)) + hpet_prev_update_sec = -1; + if (!oldbits) hpet_rtc_timer_init(); @@ -671,7 +690,7 @@ static void hpet_rtc_timer_reinit(void) if (hpet_rtc_flags & RTC_PIE) hpet_pie_count += lost_ints; if (printk_ratelimit()) - printk(KERN_WARNING "rtc: lost %d interrupts\n", + printk(KERN_WARNING "hpet1: lost %d rtc interrupts\n", lost_ints); } } @@ -689,7 +708,8 @@ irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) if (hpet_rtc_flags & RTC_UIE && curr_time.tm_sec != hpet_prev_update_sec) { - rtc_int_flag = RTC_UF; + if (hpet_prev_update_sec >= 0) + rtc_int_flag = RTC_UF; hpet_prev_update_sec = curr_time.tm_sec; } |