diff options
Diffstat (limited to 'arch/powerpc/sysdev/fsl_pci.c')
| -rw-r--r-- | arch/powerpc/sysdev/fsl_pci.c | 54 |
1 files changed, 35 insertions, 19 deletions
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 61e6d77efa4f..a3f4abadbade 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -1,7 +1,7 @@ /* - * MPC85xx/86xx PCI/PCIE support routing. + * MPC83xx/85xx/86xx PCI/PCIE support routing. * - * Copyright 2007 Freescale Semiconductor, Inc + * Copyright 2007,2008 Freescale Semiconductor, Inc * * Initial author: Xianghua Xiao <x.xiao@freescale.com> * Recode: ZHANG WEI <wei.zhang@freescale.com> @@ -256,15 +256,42 @@ int __init mpc83xx_add_bridge(struct device_node *dev) { int len; struct pci_controller *hose; - struct resource rsrc; + struct resource rsrc_reg; + struct resource rsrc_cfg; const int *bus_range; - int primary = 1, has_address = 0; - phys_addr_t immr = get_immrbase(); + int primary; pr_debug("Adding PCI host bridge %s\n", dev->full_name); /* Fetch host bridge registers address */ - has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); + if (of_address_to_resource(dev, 0, &rsrc_reg)) { + printk(KERN_WARNING "Can't get pci register base!\n"); + return -ENOMEM; + } + + memset(&rsrc_cfg, 0, sizeof(rsrc_cfg)); + + if (of_address_to_resource(dev, 1, &rsrc_cfg)) { + printk(KERN_WARNING + "No pci config register base in dev tree, " + "using default\n"); + /* + * MPC83xx supports up to two host controllers + * one at 0x8500 has config space registers at 0x8300 + * one at 0x8600 has config space registers at 0x8380 + */ + if ((rsrc_reg.start & 0xfffff) == 0x8500) + rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8300; + else if ((rsrc_reg.start & 0xfffff) == 0x8600) + rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8380; + } + /* + * Controller at offset 0x8500 is primary + */ + if ((rsrc_reg.start & 0xfffff) == 0x8500) + primary = 1; + else + primary = 0; /* Get bus range if any */ bus_range = of_get_property(dev, "bus-range", &len); @@ -281,22 +308,11 @@ int __init mpc83xx_add_bridge(struct device_node *dev) hose->first_busno = bus_range ? bus_range[0] : 0; hose->last_busno = bus_range ? bus_range[1] : 0xff; - /* MPC83xx supports up to two host controllers one at 0x8500 from immrbar - * the other at 0x8600, we consider the 0x8500 the primary controller - */ - /* PCI 1 */ - if ((rsrc.start & 0xfffff) == 0x8500) { - setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0); - } - /* PCI 2 */ - if ((rsrc.start & 0xfffff) == 0x8600) { - setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0); - primary = 0; - } + setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 4, 0); printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. " "Firmware bus number: %d->%d\n", - (unsigned long long)rsrc.start, hose->first_busno, + (unsigned long long)rsrc_reg.start, hose->first_busno, hose->last_busno); pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", |