diff options
Diffstat (limited to 'arch/powerpc/boot')
| -rw-r--r-- | arch/powerpc/boot/Makefile | 34 | ||||
| -rw-r--r-- | arch/powerpc/boot/decompress.c | 143 | ||||
| -rw-r--r-- | arch/powerpc/boot/main.c | 35 | ||||
| -rw-r--r-- | arch/powerpc/boot/ops.h | 3 |
4 files changed, 190 insertions, 25 deletions
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index bede555d78cf..861348c72519 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -63,13 +63,28 @@ $(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405 -# the kernel's version of zlib pulls in a lot of other kernel headers -# which we don't provide inside the wrapper. +# The pre-boot decompressors pull in a lot of kernel headers and other source +# files. This creates a bit of a dependency headache since we need to copy +# these files into the build dir, fix up any includes and ensure that dependent +# files are copied in the right order. + +# these need to be seperate variables because they are copied out of different +# directories in the kernel tree. Sure you COULd merge them, but it's a +# cure-is-worse-than-disease situation. +zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c zlibheader-$(CONFIG_KERNEL_GZIP) := inffast.h inffixed.h inflate.h inftrees.h infutil.h zliblinuxheader-$(CONFIG_KERNEL_GZIP) := zlib.h zconf.h zutil.h -$(addprefix $(obj)/,$(zlib-y) cuboot-c2k.o gunzip_util.o main.o): \ +$(addprefix $(obj)/, decompress.o): \ + $(addprefix $(obj)/,$(zlib-decomp-y)) + +$(addprefix $(obj)/, $(zlib-decomp-y)): \ + $(addprefix $(obj)/,$(zliblinuxheader-y)) \ + $(addprefix $(obj)/,$(zlibheader-y)) \ + $(addprefix $(obj)/,$(zlib-y)) + +$(addprefix $(obj)/,$(zlib-y)): \ $(addprefix $(obj)/,$(zliblinuxheader-y)) \ $(addprefix $(obj)/,$(zlibheader-y)) @@ -79,10 +94,10 @@ libfdtheader := fdt.h libfdt.h libfdt_internal.h $(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o): \ $(addprefix $(obj)/,$(libfdtheader)) -src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \ +src-wlib-y := string.S crt0.S crtsavres.S stdio.c decompress.c main.c \ $(libfdt) libfdt-wrapper.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \ - gunzip_util.c elf_util.c $(zlib-y) devtree.c stdlib.c \ + elf_util.c $(zlib-y) devtree.c stdlib.c \ oflib.c ofconsole.c cuboot.c mpsc.c cpm-serial.c \ uartlite.c mpc52xx-psc.c opal.c opal-calls.S src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c @@ -143,6 +158,9 @@ $(addprefix $(obj)/,$(zlibheader-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% $(addprefix $(obj)/,$(zliblinuxheader-y)): $(obj)/%: $(srctree)/include/linux/% $(call cmd,copy_kern_src) +$(addprefix $(obj)/,$(zlib-decomp-y)): $(obj)/%: $(srctree)/lib/% + $(call cmd,copy_kern_src) + quiet_cmd_copy_libfdt = COPY $@ cmd_copy_libfdt = cp $< $@ @@ -160,7 +178,7 @@ $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S $(Q)cp $< $@ clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \ - $(libfdt) $(libfdtheader) \ + $(zlib-decomp-) $(libfdt) $(libfdtheader) \ empty.c zImage.coff.lds zImage.ps3.lds zImage.lds quiet_cmd_bootcc = BOOTCC $@ @@ -410,8 +428,8 @@ clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ zImage.maple simpleImage.* otheros.bld *.dtb # clean up files cached by wrapper -clean-kernel := vmlinux.strip vmlinux.bin -clean-kernel += $(addsuffix .gz,$(clean-kernel)) +clean-kernel-base := vmlinux.strip vmlinux.bin +clean-kernel := $(addsuffix .gz,$(clean-kernel-base)) # If not absolute clean-files are relative to $(obj). clean-files += $(addprefix $(objtree)/, $(clean-kernel)) diff --git a/arch/powerpc/boot/decompress.c b/arch/powerpc/boot/decompress.c new file mode 100644 index 000000000000..3b414d425f16 --- /dev/null +++ b/arch/powerpc/boot/decompress.c @@ -0,0 +1,143 @@ +/* + * Wrapper around the kernel's pre-boot decompression library. + * + * Copyright (C) IBM Corporation 2016. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include "elf.h" +#include "page.h" +#include "string.h" +#include "stdio.h" +#include "ops.h" +#include "reg.h" +#include "types.h" + +/* + * The decompressor_*.c files play #ifdef games so they can be used in both + * pre-boot and regular kernel code. We need these definitions to make the + * includes work. + */ + +#define STATIC static +#define INIT +#define __always_inline inline + +/* + * The build process will copy the required zlib source files and headers + * out of lib/ and "fix" the includes so they do not pull in other kernel + * headers. + */ + +#ifdef CONFIG_KERNEL_GZIP +# include "decompress_inflate.c" +#endif + +/* globals for tracking the state of the decompression */ +static unsigned long decompressed_bytes; +static unsigned long limit; +static unsigned long skip; +static char *output_buffer; + +/* + * flush() is called by __decompress() when the decompressor's scratch buffer is + * full. + */ +static long flush(void *v, unsigned long buffer_size) +{ + unsigned long end = decompressed_bytes + buffer_size; + unsigned long size = buffer_size; + unsigned long offset = 0; + char *in = v; + char *out; + + /* + * if we hit our decompression limit, we need to fake an error to abort + * the in-progress decompression. + */ + if (decompressed_bytes >= limit) + return -1; + + /* skip this entire block */ + if (end <= skip) { + decompressed_bytes += buffer_size; + return buffer_size; + } + + /* skip some data at the start, but keep the rest of the block */ + if (decompressed_bytes < skip && end > skip) { + offset = skip - decompressed_bytes; + + in += offset; + size -= offset; + decompressed_bytes += offset; + } + + out = &output_buffer[decompressed_bytes - skip]; + size = min(decompressed_bytes + size, limit) - decompressed_bytes; + + memcpy(out, in, size); + decompressed_bytes += size; + + return buffer_size; +} + +static void print_err(char *s) +{ + /* suppress the "error" when we terminate the decompressor */ + if (decompressed_bytes >= limit) + return; + + printf("Decompression error: '%s'\n\r", s); +} + +/** + * partial_decompress - decompresses part or all of a compressed buffer + * @inbuf: input buffer + * @input_size: length of the input buffer + * @outbuf: input buffer + * @output_size: length of the input buffer + * @skip number of output bytes to ignore + * + * This function takes compressed data from inbuf, decompresses and write it to + * outbuf. Once output_size bytes are written to the output buffer, or the + * stream is exhausted the function will return the number of bytes that were + * decompressed. Otherwise it will return whatever error code the decompressor + * reported (NB: This is specific to each decompressor type). + * + * The skip functionality is mainly there so the program and discover + * the size of the compressed image so that it can ask firmware (if present) + * for an appropriately sized buffer. + */ +long partial_decompress(void *inbuf, unsigned long input_size, + void *outbuf, unsigned long output_size, unsigned long _skip) +{ + int ret; + + /* + * The skipped bytes needs to be included in the size of data we want + * to decompress. + */ + output_size += _skip; + + decompressed_bytes = 0; + output_buffer = outbuf; + limit = output_size; + skip = _skip; + + ret = __decompress(inbuf, input_size, NULL, flush, outbuf, + output_size, NULL, print_err); + + /* + * If decompression was aborted due to an actual error rather than + * a fake error that we used to abort, then we should report it. + */ + if (decompressed_bytes < limit) + return ret; + + return decompressed_bytes - skip; +} diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c index d80161b633f4..f7a184b6c35b 100644 --- a/arch/powerpc/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -15,11 +15,8 @@ #include "string.h" #include "stdio.h" #include "ops.h" -#include "gunzip_util.h" #include "reg.h" -static struct gunzip_state gzstate; - struct addr_range { void *addr; unsigned long size; @@ -30,15 +27,14 @@ struct addr_range { static struct addr_range prep_kernel(void) { char elfheader[256]; - void *vmlinuz_addr = _vmlinux_start; + unsigned char *vmlinuz_addr = (unsigned char *)_vmlinux_start; unsigned long vmlinuz_size = _vmlinux_end - _vmlinux_start; void *addr = 0; struct elf_info ei; - int len; + long len; - /* gunzip the ELF header of the kernel */ - gunzip_start(&gzstate, vmlinuz_addr, vmlinuz_size); - gunzip_exactly(&gzstate, elfheader, sizeof(elfheader)); + partial_decompress(vmlinuz_addr, vmlinuz_size, + elfheader, sizeof(elfheader), 0); if (!parse_elf64(elfheader, &ei) && !parse_elf32(elfheader, &ei)) fatal("Error: not a valid PPC32 or PPC64 ELF file!\n\r"); @@ -51,7 +47,7 @@ static struct addr_range prep_kernel(void) * the kernel bss must be claimed (it will be zero'd by the * kernel itself) */ - printf("Allocating 0x%lx bytes for kernel ...\n\r", ei.memsize); + printf("Allocating 0x%lx bytes for kernel...\n\r", ei.memsize); if (platform_ops.vmlinux_alloc) { addr = platform_ops.vmlinux_alloc(ei.memsize); @@ -71,16 +67,21 @@ static struct addr_range prep_kernel(void) "device tree\n\r"); } - /* Finally, gunzip the kernel */ - printf("gunzipping (0x%p <- 0x%p:0x%p)...", addr, + /* Finally, decompress the kernel */ + printf("Decompressing (0x%p <- 0x%p:0x%p)...\n\r", addr, vmlinuz_addr, vmlinuz_addr+vmlinuz_size); - /* discard up to the actual load data */ - gunzip_discard(&gzstate, ei.elfoffset - sizeof(elfheader)); - len = gunzip_finish(&gzstate, addr, ei.loadsize); + + len = partial_decompress(vmlinuz_addr, vmlinuz_size, + addr, ei.loadsize, ei.elfoffset); + + if (len < 0) + fatal("Decompression failed with error code %ld\n\r", len); + if (len != ei.loadsize) - fatal("ran out of data! only got 0x%x of 0x%lx bytes.\n\r", - len, ei.loadsize); - printf("done 0x%x bytes\n\r", len); + fatal("Decompression error: got 0x%lx bytes, expected 0x%lx.\n\r", + len, ei.loadsize); + + printf("Done! Decompressed 0x%lx bytes\n\r", len); flush_cache(addr, ei.loadsize); diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h index e19b64ef977a..309d1b127e96 100644 --- a/arch/powerpc/boot/ops.h +++ b/arch/powerpc/boot/ops.h @@ -260,4 +260,7 @@ int __ilog2_u32(u32 n) return 31 - bit; } +long partial_decompress(void *inbuf, unsigned long input_size, void *outbuf, + unsigned long output_size, unsigned long skip); + #endif /* _PPC_BOOT_OPS_H_ */ |