diff options
Diffstat (limited to 'arch/i386/kernel/entry_32.S')
| -rw-r--r-- | arch/i386/kernel/entry_32.S | 1112 |
1 files changed, 1112 insertions, 0 deletions
diff --git a/arch/i386/kernel/entry_32.S b/arch/i386/kernel/entry_32.S new file mode 100644 index 000000000000..290b7bc82da3 --- /dev/null +++ b/arch/i386/kernel/entry_32.S @@ -0,0 +1,1112 @@ +/* + * linux/arch/i386/entry.S + * + * Copyright (C) 1991, 1992 Linus Torvalds + */ + +/* + * entry.S contains the system-call and fault low-level handling routines. + * This also contains the timer-interrupt handler, as well as all interrupts + * and faults that can result in a task-switch. + * + * NOTE: This code handles signal-recognition, which happens every time + * after a timer-interrupt and after each system call. + * + * I changed all the .align's to 4 (16 byte alignment), as that's faster + * on a 486. + * + * Stack layout in 'syscall_exit': + * ptrace needs to have all regs on the stack. + * if the order here is changed, it needs to be + * updated in fork.c:copy_process, signal.c:do_signal, + * ptrace.c and ptrace.h + * + * 0(%esp) - %ebx + * 4(%esp) - %ecx + * 8(%esp) - %edx + * C(%esp) - %esi + * 10(%esp) - %edi + * 14(%esp) - %ebp + * 18(%esp) - %eax + * 1C(%esp) - %ds + * 20(%esp) - %es + * 24(%esp) - %fs + * 28(%esp) - orig_eax + * 2C(%esp) - %eip + * 30(%esp) - %cs + * 34(%esp) - %eflags + * 38(%esp) - %oldesp + * 3C(%esp) - %oldss + * + * "current" is in register %ebx during any slow entries. + */ + +#include <linux/linkage.h> +#include <asm/thread_info.h> +#include <asm/irqflags.h> +#include <asm/errno.h> +#include <asm/segment.h> +#include <asm/smp.h> +#include <asm/page.h> +#include <asm/desc.h> +#include <asm/percpu.h> +#include <asm/dwarf2.h> +#include "irq_vectors.h" + +/* + * We use macros for low-level operations which need to be overridden + * for paravirtualization. The following will never clobber any registers: + * INTERRUPT_RETURN (aka. "iret") + * GET_CR0_INTO_EAX (aka. "movl %cr0, %eax") + * ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit"). + * + * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must + * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY). + * Allowing a register to be clobbered can shrink the paravirt replacement + * enough to patch inline, increasing performance. + */ + +#define nr_syscalls ((syscall_table_size)/4) + +CF_MASK = 0x00000001 +TF_MASK = 0x00000100 +IF_MASK = 0x00000200 +DF_MASK = 0x00000400 +NT_MASK = 0x00004000 +VM_MASK = 0x00020000 + +#ifdef CONFIG_PREEMPT +#define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF +#else +#define preempt_stop(clobbers) +#define resume_kernel restore_nocheck +#endif + +.macro TRACE_IRQS_IRET +#ifdef CONFIG_TRACE_IRQFLAGS + testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off? + jz 1f + TRACE_IRQS_ON +1: +#endif +.endm + +#ifdef CONFIG_VM86 +#define resume_userspace_sig check_userspace +#else +#define resume_userspace_sig resume_userspace +#endif + +#define SAVE_ALL \ + cld; \ + pushl %fs; \ + CFI_ADJUST_CFA_OFFSET 4;\ + /*CFI_REL_OFFSET fs, 0;*/\ + pushl %es; \ + CFI_ADJUST_CFA_OFFSET 4;\ + /*CFI_REL_OFFSET es, 0;*/\ + pushl %ds; \ + CFI_ADJUST_CFA_OFFSET 4;\ + /*CFI_REL_OFFSET ds, 0;*/\ + pushl %eax; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET eax, 0;\ + pushl %ebp; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET ebp, 0;\ + pushl %edi; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET edi, 0;\ + pushl %esi; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET esi, 0;\ + pushl %edx; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET edx, 0;\ + pushl %ecx; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET ecx, 0;\ + pushl %ebx; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET ebx, 0;\ + movl $(__USER_DS), %edx; \ + movl %edx, %ds; \ + movl %edx, %es; \ + movl $(__KERNEL_PERCPU), %edx; \ + movl %edx, %fs + +#define RESTORE_INT_REGS \ + popl %ebx; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE ebx;\ + popl %ecx; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE ecx;\ + popl %edx; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE edx;\ + popl %esi; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE esi;\ + popl %edi; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE edi;\ + popl %ebp; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE ebp;\ + popl %eax; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE eax + +#define RESTORE_REGS \ + RESTORE_INT_REGS; \ +1: popl %ds; \ + CFI_ADJUST_CFA_OFFSET -4;\ + /*CFI_RESTORE ds;*/\ +2: popl %es; \ + CFI_ADJUST_CFA_OFFSET -4;\ + /*CFI_RESTORE es;*/\ +3: popl %fs; \ + CFI_ADJUST_CFA_OFFSET -4;\ + /*CFI_RESTORE fs;*/\ +.pushsection .fixup,"ax"; \ +4: movl $0,(%esp); \ + jmp 1b; \ +5: movl $0,(%esp); \ + jmp 2b; \ +6: movl $0,(%esp); \ + jmp 3b; \ +.section __ex_table,"a";\ + .align 4; \ + .long 1b,4b; \ + .long 2b,5b; \ + .long 3b,6b; \ +.popsection + +#define RING0_INT_FRAME \ + CFI_STARTPROC simple;\ + CFI_SIGNAL_FRAME;\ + CFI_DEF_CFA esp, 3*4;\ + /*CFI_OFFSET cs, -2*4;*/\ + CFI_OFFSET eip, -3*4 + +#define RING0_EC_FRAME \ + CFI_STARTPROC simple;\ + CFI_SIGNAL_FRAME;\ + CFI_DEF_CFA esp, 4*4;\ + /*CFI_OFFSET cs, -2*4;*/\ + CFI_OFFSET eip, -3*4 + +#define RING0_PTREGS_FRAME \ + CFI_STARTPROC simple;\ + CFI_SIGNAL_FRAME;\ + CFI_DEF_CFA esp, PT_OLDESP-PT_EBX;\ + /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/\ + CFI_OFFSET eip, PT_EIP-PT_OLDESP;\ + /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/\ + /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/\ + CFI_OFFSET eax, PT_EAX-PT_OLDESP;\ + CFI_OFFSET ebp, PT_EBP-PT_OLDESP;\ + CFI_OFFSET edi, PT_EDI-PT_OLDESP;\ + CFI_OFFSET esi, PT_ESI-PT_OLDESP;\ + CFI_OFFSET edx, PT_EDX-PT_OLDESP;\ + CFI_OFFSET ecx, PT_ECX-PT_OLDESP;\ + CFI_OFFSET ebx, PT_EBX-PT_OLDESP + +ENTRY(ret_from_fork) + CFI_STARTPROC + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + call schedule_tail + GET_THREAD_INFO(%ebp) + popl %eax + CFI_ADJUST_CFA_OFFSET -4 + pushl $0x0202 # Reset kernel eflags + CFI_ADJUST_CFA_OFFSET 4 + popfl + CFI_ADJUST_CFA_OFFSET -4 + jmp syscall_exit + CFI_ENDPROC +END(ret_from_fork) + +/* + * Return to user mode is not as complex as all this looks, + * but we want the default path for a system call return to + * go as quickly as possible which is why some of this is + * less clear than it otherwise should be. + */ + + # userspace resumption stub bypassing syscall exit tracing + ALIGN + RING0_PTREGS_FRAME +ret_from_exception: + preempt_stop(CLBR_ANY) +ret_from_intr: + GET_THREAD_INFO(%ebp) +check_userspace: + movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS + movb PT_CS(%esp), %al + andl $(VM_MASK | SEGMENT_RPL_MASK), %eax + cmpl $USER_RPL, %eax + jb resume_kernel # not returning to v8086 or userspace + +ENTRY(resume_userspace) + DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt + # setting need_resched or sigpending + # between sampling and the iret + movl TI_flags(%ebp), %ecx + andl $_TIF_WORK_MASK, %ecx # is there any work to be done on + # int/exception return? + jne work_pending + jmp restore_all +END(ret_from_exception) + +#ifdef CONFIG_PREEMPT +ENTRY(resume_kernel) + DISABLE_INTERRUPTS(CLBR_ANY) + cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ? + jnz restore_nocheck +need_resched: + movl TI_flags(%ebp), %ecx # need_resched set ? + testb $_TIF_NEED_RESCHED, %cl + jz restore_all + testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off (exception path) ? + jz restore_all + call preempt_schedule_irq + jmp need_resched +END(resume_kernel) +#endif + CFI_ENDPROC + +/* SYSENTER_RETURN points to after the "sysenter" instruction in + the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */ + + # sysenter call handler stub +ENTRY(sysenter_entry) + CFI_STARTPROC simple + CFI_SIGNAL_FRAME + CFI_DEF_CFA esp, 0 + CFI_REGISTER esp, ebp + movl TSS_sysenter_esp0(%esp),%esp +sysenter_past_esp: + /* + * No need to follow this irqs on/off section: the syscall + * disabled irqs and here we enable it straight after entry: + */ + ENABLE_INTERRUPTS(CLBR_NONE) + pushl $(__USER_DS) + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET ss, 0*/ + pushl %ebp + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET esp, 0 + pushfl + CFI_ADJUST_CFA_OFFSET 4 + pushl $(__USER_CS) + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET cs, 0*/ + /* + * Push current_thread_info()->sysenter_return to the stack. + * A tiny bit of offset fixup is necessary - 4*4 means the 4 words + * pushed above; +8 corresponds to copy_thread's esp0 setting. + */ + pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp) + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET eip, 0 + +/* + * Load the potential sixth argument from user stack. + * Careful about security. + */ + cmpl $__PAGE_OFFSET-3,%ebp + jae syscall_fault +1: movl (%ebp),%ebp +.section __ex_table,"a" + .align 4 + .long 1b,syscall_fault +.previous + + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + GET_THREAD_INFO(%ebp) + + /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ + testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp) + jnz syscall_trace_entry + cmpl $(nr_syscalls), %eax + jae syscall_badsys + call *sys_call_table(,%eax,4) + movl %eax,PT_EAX(%esp) + DISABLE_INTERRUPTS(CLBR_ANY) + TRACE_IRQS_OFF + movl TI_flags(%ebp), %ecx + testw $_TIF_ALLWORK_MASK, %cx + jne syscall_exit_work +/* if something modifies registers it must also disable sysexit */ + movl PT_EIP(%esp), %edx + movl PT_OLDESP(%esp), %ecx + xorl %ebp,%ebp + TRACE_IRQS_ON +1: mov PT_FS(%esp), %fs + ENABLE_INTERRUPTS_SYSEXIT + CFI_ENDPROC +.pushsection .fixup,"ax" +2: movl $0,PT_FS(%esp) + jmp 1b +.section __ex_table,"a" + .align 4 + .long 1b,2b +.popsection +ENDPROC(sysenter_entry) + + # system call handler stub +ENTRY(system_call) + RING0_INT_FRAME # can't unwind into user space anyway + pushl %eax # save orig_eax + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + GET_THREAD_INFO(%ebp) + # system call tracing in operation / emulation + /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ + testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp) + jnz syscall_trace_entry + cmpl $(nr_syscalls), %eax + jae syscall_badsys +syscall_call: + call *sys_call_table(,%eax,4) + movl %eax,PT_EAX(%esp) # store the return value +syscall_exit: + DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt + # setting need_resched or sigpending + # between sampling and the iret + TRACE_IRQS_OFF + testl $TF_MASK,PT_EFLAGS(%esp) # If tracing set singlestep flag on exit + jz no_singlestep + orl $_TIF_SINGLESTEP,TI_flags(%ebp) +no_singlestep: + movl TI_flags(%ebp), %ecx + testw $_TIF_ALLWORK_MASK, %cx # current->work + jne syscall_exit_work + +restore_all: + movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS + # Warning: PT_OLDSS(%esp) contains the wrong/random values if we + # are returning to the kernel. + # See comments in process.c:copy_thread() for details. + movb PT_OLDSS(%esp), %ah + movb PT_CS(%esp), %al + andl $(VM_MASK | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax + cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax + CFI_REMEMBER_STATE + je ldt_ss # returning to user-space with LDT SS +restore_nocheck: + TRACE_IRQS_IRET +restore_nocheck_notrace: + RESTORE_REGS + addl $4, %esp # skip orig_eax/error_code + CFI_ADJUST_CFA_OFFSET -4 +1: INTERRUPT_RETURN +.section .fixup,"ax" +iret_exc: + pushl $0 # no error code + pushl $do_iret_error + jmp error_code +.previous +.section __ex_table,"a" + .align 4 + .long 1b,iret_exc +.previous + + CFI_RESTORE_STATE +ldt_ss: + larl PT_OLDSS(%esp), %eax + jnz restore_nocheck + testl $0x00400000, %eax # returning to 32bit stack? + jnz restore_nocheck # allright, normal return + +#ifdef CONFIG_PARAVIRT + /* + * The kernel can't run on a non-flat stack if paravirt mode + * is active. Rather than try to fixup the high bits of + * ESP, bypass this code entirely. This may break DOSemu + * and/or Wine support in a paravirt VM, although the option + * is still available to implement the setting of the high + * 16-bits in the INTERRUPT_RETURN paravirt-op. + */ + cmpl $0, paravirt_ops+PARAVIRT_enabled + jne restore_nocheck +#endif + + /* If returning to userspace with 16bit stack, + * try to fix the higher word of ESP, as the CPU + * won't restore it. + * This is an "official" bug of all the x86-compatible + * CPUs, which we can try to work around to make + * dosemu and wine happy. */ + movl PT_OLDESP(%esp), %eax + movl %esp, %edx + call patch_espfix_desc + pushl $__ESPFIX_SS + CFI_ADJUST_CFA_OFFSET 4 + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + DISABLE_INTERRUPTS(CLBR_EAX) + TRACE_IRQS_OFF + lss (%esp), %esp + CFI_ADJUST_CFA_OFFSET -8 + jmp restore_nocheck + CFI_ENDPROC +ENDPROC(system_call) + + # perform work that needs to be done immediately before resumption + ALIGN + RING0_PTREGS_FRAME # can't unwind into user space anyway +work_pending: + testb $_TIF_NEED_RESCHED, %cl + jz work_notifysig +work_resched: + call schedule + DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt + # setting need_resched or sigpending + # between sampling and the iret + TRACE_IRQS_OFF + movl TI_flags(%ebp), %ecx + andl $_TIF_WORK_MASK, %ecx # is there any work to be done other + # than syscall tracing? + jz restore_all + testb $_TIF_NEED_RESCHED, %cl + jnz work_resched + +work_notifysig: # deal with pending signals and + # notify-resume requests +#ifdef CONFIG_VM86 + testl $VM_MASK, PT_EFLAGS(%esp) + movl %esp, %eax + jne work_notifysig_v86 # returning to kernel-space or + # vm86-space + xorl %edx, %edx + call do_notify_resume + jmp resume_userspace_sig + + ALIGN +work_notifysig_v86: + pushl %ecx # save ti_flags for do_notify_resume + CFI_ADJUST_CFA_OFFSET 4 + call save_v86_state # %eax contains pt_regs pointer + popl %ecx + CFI_ADJUST_CFA_OFFSET -4 + movl %eax, %esp +#else + movl %esp, %eax +#endif + xorl %edx, %edx + call do_notify_resume + jmp resume_userspace_sig +END(work_pending) + + # perform syscall exit tracing + ALIGN +syscall_trace_entry: + movl $-ENOSYS,PT_EAX(%esp) + movl %esp, %eax + xorl %edx,%edx + call do_syscall_trace + cmpl $0, %eax + jne resume_userspace # ret != 0 -> running under PTRACE_SYSEMU, + # so must skip actual syscall + movl PT_ORIG_EAX(%esp), %eax + cmpl $(nr_syscalls), %eax + jnae syscall_call + jmp syscall_exit +END(syscall_trace_entry) + + # perform syscall exit tracing + ALIGN +syscall_exit_work: + testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl + jz work_pending + TRACE_IRQS_ON + ENABLE_INTERRUPTS(CLBR_ANY) # could let do_syscall_trace() call + # schedule() instead + movl %esp, %eax + movl $1, %edx + call do_syscall_trace + jmp resume_userspace +END(syscall_exit_work) + CFI_ENDPROC + + RING0_INT_FRAME # can't unwind into user space anyway +syscall_fault: + pushl %eax # save orig_eax + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + GET_THREAD_INFO(%ebp) + movl $-EFAULT,PT_EAX(%esp) + jmp resume_userspace +END(syscall_fault) + +syscall_badsys: + movl $-ENOSYS,PT_EAX(%esp) + jmp resume_userspace +END(syscall_badsys) + CFI_ENDPROC + +#define FIXUP_ESPFIX_STACK \ + /* since we are on a wrong stack, we cant make it a C code :( */ \ + PER_CPU(gdt_page, %ebx); \ + GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah); \ + addl %esp, %eax; \ + pushl $__KERNEL_DS; \ + CFI_ADJUST_CFA_OFFSET 4; \ + pushl %eax; \ + CFI_ADJUST_CFA_OFFSET 4; \ + lss (%esp), %esp; \ + CFI_ADJUST_CFA_OFFSET -8; +#define UNWIND_ESPFIX_STACK \ + movl %ss, %eax; \ + /* see if on espfix stack */ \ + cmpw $__ESPFIX_SS, %ax; \ + jne 27f; \ + movl $__KERNEL_DS, %eax; \ + movl %eax, %ds; \ + movl %eax, %es; \ + /* switch to normal stack */ \ + FIXUP_ESPFIX_STACK; \ +27:; + +/* + * Build the entry stubs and pointer table with + * some assembler magic. + */ +.data +ENTRY(interrupt) +.text + +ENTRY(irq_entries_start) + RING0_INT_FRAME +vector=0 +.rept NR_IRQS + ALIGN + .if vector + CFI_ADJUST_CFA_OFFSET -4 + .endif +1: pushl $~(vector) + CFI_ADJUST_CFA_OFFSET 4 + jmp common_interrupt + .previous + .long 1b + .text +vector=vector+1 +.endr +END(irq_entries_start) + +.previous +END(interrupt) +.previous + +/* + * the CPU automatically disables interrupts when executing an IRQ vector, + * so IRQ-flags tracing has to follow that: + */ + ALIGN +common_interrupt: + SAVE_ALL + TRACE_IRQS_OFF + movl %esp,%eax + call do_IRQ + jmp ret_from_intr +ENDPROC(common_interrupt) + CFI_ENDPROC + +#define BUILD_INTERRUPT(name, nr) \ +ENTRY(name) \ + RING0_INT_FRAME; \ + pushl $~(nr); \ + CFI_ADJUST_CFA_OFFSET 4; \ + SAVE_ALL; \ + TRACE_IRQS_OFF \ + movl %esp,%eax; \ + call smp_##name; \ + jmp ret_from_intr; \ + CFI_ENDPROC; \ +ENDPROC(name) + +/* The include is where all of the SMP etc. interrupts come from */ +#include "entry_arch.h" + +KPROBE_ENTRY(page_fault) + RING0_EC_FRAME + pushl $do_page_fault + CFI_ADJUST_CFA_OFFSET 4 + ALIGN +error_code: + /* the function address is in %fs's slot on the stack */ + pushl %es + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET es, 0*/ + pushl %ds + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET ds, 0*/ + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET eax, 0 + pushl %ebp + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ebp, 0 + pushl %edi + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edi, 0 + pushl %esi + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET esi, 0 + pushl %edx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edx, 0 + pushl %ecx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ecx, 0 + pushl %ebx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ebx, 0 + cld + pushl %fs + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET fs, 0*/ + movl $(__KERNEL_PERCPU), %ecx + movl %ecx, %fs + UNWIND_ESPFIX_STACK + popl %ecx + CFI_ADJUST_CFA_OFFSET -4 + /*CFI_REGISTER es, ecx*/ + movl PT_FS(%esp), %edi # get the function address + movl PT_ORIG_EAX(%esp), %edx # get the error code + movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart + mov %ecx, PT_FS(%esp) + /*CFI_REL_OFFSET fs, ES*/ + movl $(__USER_DS), %ecx + movl %ecx, %ds + movl %ecx, %es + movl %esp,%eax # pt_regs pointer + call *%edi + jmp ret_from_exception + CFI_ENDPROC +KPROBE_END(page_fault) + +ENTRY(coprocessor_error) + RING0_INT_FRAME + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_coprocessor_error + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(coprocessor_error) + +ENTRY(simd_coprocessor_error) + RING0_INT_FRAME + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_simd_coprocessor_error + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(simd_coprocessor_error) + +ENTRY(device_not_available) + RING0_INT_FRAME + pushl $-1 # mark this as an int + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + GET_CR0_INTO_EAX + testl $0x4, %eax # EM (math emulation bit) + jne device_not_available_emulate + preempt_stop(CLBR_ANY) + call math_state_restore + jmp ret_from_exception +device_not_available_emulate: + pushl $0 # temporary storage for ORIG_EIP + CFI_ADJUST_CFA_OFFSET 4 + call math_emulate + addl $4, %esp + CFI_ADJUST_CFA_OFFSET -4 + jmp ret_from_exception + CFI_ENDPROC +END(device_not_available) + +/* + * Debug traps and NMI can happen at the one SYSENTER instruction + * that sets up the real kernel stack. Check here, since we can't + * allow the wrong stack to be used. + * + * "TSS_sysenter_esp0+12" is because the NMI/debug handler will have + * already pushed 3 words if it hits on the sysenter instruction: + * eflags, cs and eip. + * + * We just load the right stack, and push the three (known) values + * by hand onto the new stack - while updating the return eip past + * the instruction that would have done it for sysenter. + */ +#define FIX_STACK(offset, ok, label) \ + cmpw $__KERNEL_CS,4(%esp); \ + jne ok; \ +label: \ + movl TSS_sysenter_esp0+offset(%esp),%esp; \ + CFI_DEF_CFA esp, 0; \ + CFI_UNDEFINED eip; \ + pushfl; \ + CFI_ADJUST_CFA_OFFSET 4; \ + pushl $__KERNEL_CS; \ + CFI_ADJUST_CFA_OFFSET 4; \ + pushl $sysenter_past_esp; \ + CFI_ADJUST_CFA_OFFSET 4; \ + CFI_REL_OFFSET eip, 0 + +KPROBE_ENTRY(debug) + RING0_INT_FRAME + cmpl $sysenter_entry,(%esp) + jne debug_stack_correct + FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn) +debug_stack_correct: + pushl $-1 # mark this as an int + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + xorl %edx,%edx # error code 0 + movl %esp,%eax # pt_regs pointer + call do_debug + jmp ret_from_exception + CFI_ENDPROC +KPROBE_END(debug) + +/* + * NMI is doubly nasty. It can happen _while_ we're handling + * a debug fault, and the debug fault hasn't yet been able to + * clear up the stack. So we first check whether we got an + * NMI on the sysenter entry path, but after that we need to + * check whether we got an NMI on the debug path where the debug + * fault happened on the sysenter path. + */ +KPROBE_ENTRY(nmi) + RING0_INT_FRAME + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + movl %ss, %eax + cmpw $__ESPFIX_SS, %ax + popl %eax + CFI_ADJUST_CFA_OFFSET -4 + je nmi_espfix_stack + cmpl $sysenter_entry,(%esp) + je nmi_stack_fixup + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + movl %esp,%eax + /* Do not access memory above the end of our stack page, + * it might not exist. + */ + andl $(THREAD_SIZE-1),%eax + cmpl $(THREAD_SIZE-20),%eax + popl %eax + CFI_ADJUST_CFA_OFFSET -4 + jae nmi_stack_correct + cmpl $sysenter_entry,12(%esp) + je nmi_debug_stack_check +nmi_stack_correct: + /* We have a RING0_INT_FRAME here */ + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + xorl %edx,%edx # zero error code + movl %esp,%eax # pt_regs pointer + call do_nmi + jmp restore_nocheck_notrace + CFI_ENDPROC + +nmi_stack_fixup: + RING0_INT_FRAME + FIX_STACK(12,nmi_stack_correct, 1) + jmp nmi_stack_correct + +nmi_debug_stack_check: + /* We have a RING0_INT_FRAME here */ + cmpw $__KERNEL_CS,16(%esp) + jne nmi_stack_correct + cmpl $debug,(%esp) + jb nmi_stack_correct + cmpl $debug_esp_fix_insn,(%esp) + ja nmi_stack_correct + FIX_STACK(24,nmi_stack_correct, 1) + jmp nmi_stack_correct + +nmi_espfix_stack: + /* We have a RING0_INT_FRAME here. + * + * create the pointer to lss back + */ + pushl %ss + CFI_ADJUST_CFA_OFFSET 4 + pushl %esp + CFI_ADJUST_CFA_OFFSET 4 + addw $4, (%esp) + /* copy the iret frame of 12 bytes */ + .rept 3 + pushl 16(%esp) + CFI_ADJUST_CFA_OFFSET 4 + .endr + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + FIXUP_ESPFIX_STACK # %eax == %esp + xorl %edx,%edx # zero error code + call do_nmi + RESTORE_REGS + lss 12+4(%esp), %esp # back to espfix stack + CFI_ADJUST_CFA_OFFSET -24 +1: INTERRUPT_RETURN + CFI_ENDPROC +.section __ex_table,"a" + .align 4 + .long 1b,iret_exc +.previous +KPROBE_END(nmi) + +#ifdef CONFIG_PARAVIRT +ENTRY(native_iret) +1: iret +.section __ex_table,"a" + .align 4 + .long 1b,iret_exc +.previous +END(native_iret) + +ENTRY(native_irq_enable_sysexit) + sti + sysexit +END(native_irq_enable_sysexit) +#endif + +KPROBE_ENTRY(int3) + RING0_INT_FRAME + pushl $-1 # mark this as an int + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + xorl %edx,%edx # zero error code + movl %esp,%eax # pt_regs pointer + call do_int3 + jmp ret_from_exception + CFI_ENDPROC +KPROBE_END(int3) + +ENTRY(overflow) + RING0_INT_FRAME + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_overflow + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(overflow) + +ENTRY(bounds) + RING0_INT_FRAME + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_bounds + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(bounds) + +ENTRY(invalid_op) + RING0_INT_FRAME + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_invalid_op + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(invalid_op) + +ENTRY(coprocessor_segment_overrun) + RING0_INT_FRAME + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_coprocessor_segment_overrun + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(coprocessor_segment_overrun) + +ENTRY(invalid_TSS) + RING0_EC_FRAME + pushl $do_invalid_TSS + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(invalid_TSS) + +ENTRY(segment_not_present) + RING0_EC_FRAME + pushl $do_segment_not_present + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(segment_not_present) + +ENTRY(stack_segment) + RING0_EC_FRAME + pushl $do_stack_segment + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(stack_segment) + +KPROBE_ENTRY(general_protection) + RING0_EC_FRAME + pushl $do_general_protection + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +KPROBE_END(general_protection) + +ENTRY(alignment_check) + RING0_EC_FRAME + pushl $do_alignment_check + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(alignment_check) + +ENTRY(divide_error) + RING0_INT_FRAME + pushl $0 # no error code + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_divide_error + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(divide_error) + +#ifdef CONFIG_X86_MCE +ENTRY(machine_check) + RING0_INT_FRAME + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + pushl machine_check_vector + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(machine_check) +#endif + +ENTRY(spurious_interrupt_bug) + RING0_INT_FRAME + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_spurious_interrupt_bug + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(spurious_interrupt_bug) + +ENTRY(kernel_thread_helper) + pushl $0 # fake return address for unwinder + CFI_STARTPROC + movl %edx,%eax + push %edx + CFI_ADJUST_CFA_OFFSET 4 + call *%ebx + push %eax + CFI_ADJUST_CFA_OFFSET 4 + call do_exit + CFI_ENDPROC +ENDPROC(kernel_thread_helper) + +#ifdef CONFIG_XEN +ENTRY(xen_hypervisor_callback) + CFI_STARTPROC + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + TRACE_IRQS_OFF + + /* Check to see if we got the event in the critical + region in xen_iret_direct, after we've reenabled + events and checked for pending events. This simulates + iret instruction's behaviour where it delivers a + pending interrupt when enabling interrupts. */ + movl PT_EIP(%esp),%eax + cmpl $xen_iret_start_crit,%eax + jb 1f + cmpl $xen_iret_end_crit,%eax + jae 1f + + call xen_iret_crit_fixup + +1: mov %esp, %eax + call xen_evtchn_do_upcall + jmp ret_from_intr + CFI_ENDPROC +ENDPROC(xen_hypervisor_callback) + +# Hypervisor uses this for application faults while it executes. +# We get here for two reasons: +# 1. Fault while reloading DS, ES, FS or GS +# 2. Fault while executing IRET +# Category 1 we fix up by reattempting the load, and zeroing the segment +# register if the load fails. +# Category 2 we fix up by jumping to do_iret_error. We cannot use the +# normal Linux return path in this case because if we use the IRET hypercall +# to pop the stack frame we end up in an infinite loop of failsafe callbacks. +# We distinguish between categories by maintaining a status value in EAX. +ENTRY(xen_failsafe_callback) + CFI_STARTPROC + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + movl $1,%eax +1: mov 4(%esp),%ds +2: mov 8(%esp),%es +3: mov 12(%esp),%fs +4: mov 16(%esp),%gs + testl %eax,%eax + popl %eax + CFI_ADJUST_CFA_OFFSET -4 + lea 16(%esp),%esp + CFI_ADJUST_CFA_OFFSET -16 + jz 5f + addl $16,%esp + jmp iret_exc # EAX != 0 => Category 2 (Bad IRET) +5: pushl $0 # EAX == 0 => Category 1 (Bad segment) + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + jmp ret_from_exception + CFI_ENDPROC + +.section .fixup,"ax" +6: xorl %eax,%eax + movl %eax,4(%esp) + jmp 1b +7: xorl %eax,%eax + movl %eax,8(%esp) + jmp 2b +8: xorl %eax,%eax + movl %eax,12(%esp) + jmp 3b +9: xorl %eax,%eax + movl %eax,16(%esp) + jmp 4b +.previous +.section __ex_table,"a" + .align 4 + .long 1b,6b + .long 2b,7b + .long 3b,8b + .long 4b,9b +.previous +ENDPROC(xen_failsafe_callback) + +#endif /* CONFIG_XEN */ + +.section .rodata,"a" +#include "syscall_table_32.S" + +syscall_table_size=(.-sys_call_table) |