diff options
Diffstat (limited to 'Documentation')
11 files changed, 133 insertions, 3 deletions
diff --git a/Documentation/ABI/testing/debugfs-driver-qat b/Documentation/ABI/testing/debugfs-driver-qat index b2db010d851e..bd6793760f29 100644 --- a/Documentation/ABI/testing/debugfs-driver-qat +++ b/Documentation/ABI/testing/debugfs-driver-qat @@ -81,3 +81,29 @@ Description: (RO) Read returns, for each Acceleration Engine (AE), the number <N>: Number of Compress and Verify (CnV) errors and type of the last CnV error detected by Acceleration Engine N. + +What: /sys/kernel/debug/qat_<device>_<BDF>/heartbeat/inject_error +Date: March 2024 +KernelVersion: 6.8 +Contact: qat-linux@intel.com +Description: (WO) Write to inject an error that simulates an heartbeat + failure. This is to be used for testing purposes. + + After writing this file, the driver stops arbitration on a + random engine and disables the fetching of heartbeat counters. + If a workload is running on the device, a job submitted to the + accelerator might not get a response and a read of the + `heartbeat/status` attribute might report -1, i.e. device + unresponsive. + The error is unrecoverable thus the device must be restarted to + restore its functionality. + + This attribute is available only when the kernel is built with + CONFIG_CRYPTO_DEV_QAT_ERROR_INJECTION=y. + + A write of 1 enables error injection. + + The following example shows how to enable error injection:: + + # cd /sys/kernel/debug/qat_<device>_<BDF> + # echo 1 > heartbeat/inject_error diff --git a/Documentation/ABI/testing/debugfs-hisi-hpre b/Documentation/ABI/testing/debugfs-hisi-hpre index 8e8de49c5cc6..d4e16ef9ac9a 100644 --- a/Documentation/ABI/testing/debugfs-hisi-hpre +++ b/Documentation/ABI/testing/debugfs-hisi-hpre @@ -111,6 +111,28 @@ Description: QM debug registers(regs) read hardware register value. This node is used to show the change of the qm register values. This node can be help users to check the change of register values. +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/qm_state +Date: Jan 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the state of the device. + 0: busy, 1: idle. + Only available for PF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/dev_timeout +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Set the wait time when stop queue fails. Available for both PF + and VF, and take no other effect on HPRE. + 0: not wait(default), others value: wait dev_timeout * 20 microsecond. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/dev_state +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the stop queue status of the QM. The default value is 0, + if dev_timeout is set, when stop queue fails, the dev_state + will return non-zero value. Available for both PF and VF, + and take no other effect on HPRE. + What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/diff_regs Date: Mar 2022 Contact: linux-crypto@vger.kernel.org diff --git a/Documentation/ABI/testing/debugfs-hisi-sec b/Documentation/ABI/testing/debugfs-hisi-sec index deeefe2c735e..6c6c9a6e150a 100644 --- a/Documentation/ABI/testing/debugfs-hisi-sec +++ b/Documentation/ABI/testing/debugfs-hisi-sec @@ -91,6 +91,28 @@ Description: QM debug registers(regs) read hardware register value. This node is used to show the change of the qm register values. This node can be help users to check the change of register values. +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/qm_state +Date: Jan 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the state of the device. + 0: busy, 1: idle. + Only available for PF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/dev_timeout +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Set the wait time when stop queue fails. Available for both PF + and VF, and take no other effect on SEC. + 0: not wait(default), others value: wait dev_timeout * 20 microsecond. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/dev_state +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the stop queue status of the QM. The default value is 0, + if dev_timeout is set, when stop queue fails, the dev_state + will return non-zero value. Available for both PF and VF, + and take no other effect on SEC. + What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/diff_regs Date: Mar 2022 Contact: linux-crypto@vger.kernel.org diff --git a/Documentation/ABI/testing/debugfs-hisi-zip b/Documentation/ABI/testing/debugfs-hisi-zip index 593714afaed2..a22dd6942219 100644 --- a/Documentation/ABI/testing/debugfs-hisi-zip +++ b/Documentation/ABI/testing/debugfs-hisi-zip @@ -104,6 +104,28 @@ Description: QM debug registers(regs) read hardware register value. This node is used to show the change of the qm registers value. This node can be help users to check the change of register values. +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/qm_state +Date: Jan 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the state of the device. + 0: busy, 1: idle. + Only available for PF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/dev_timeout +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Set the wait time when stop queue fails. Available for both PF + and VF, and take no other effect on ZIP. + 0: not wait(default), others value: wait dev_timeout * 20 microsecond. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/dev_state +Date: Feb 2024 +Contact: linux-crypto@vger.kernel.org +Description: Dump the stop queue status of the QM. The default value is 0, + if dev_timeout is set, when stop queue fails, the dev_state + will return non-zero value. Available for both PF and VF, + and take no other effect on ZIP. + What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/diff_regs Date: Mar 2022 Contact: linux-crypto@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-driver-qat b/Documentation/ABI/testing/sysfs-driver-qat index bbf329cf0d67..96020fb051c3 100644 --- a/Documentation/ABI/testing/sysfs-driver-qat +++ b/Documentation/ABI/testing/sysfs-driver-qat @@ -141,3 +141,23 @@ Description: 64 This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat/auto_reset +Date: March 2024 +KernelVersion: 6.8 +Contact: qat-linux@intel.com +Description: (RW) Reports the current state of the autoreset feature + for a QAT device + + Write to the attribute to enable or disable device auto reset. + + Device auto reset is disabled by default. + + The values are: + + * 1/Yy/on: auto reset enabled. If the device encounters an + unrecoverable error, it will be reset automatically. + * 0/Nn/off: auto reset disabled. If the device encounters an + unrecoverable error, it will not be reset. + + This attribute is only available for qat_4xxx devices. diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml index 0b7383b3106b..7dc0748444fd 100644 --- a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml @@ -12,7 +12,11 @@ maintainers: properties: compatible: - const: atmel,at91sam9g46-aes + oneOf: + - const: atmel,at91sam9g46-aes + - items: + - const: microchip,sam9x7-aes + - const: atmel,at91sam9g46-aes reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml index ee2ffb034325..d378c53314dd 100644 --- a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml @@ -12,7 +12,11 @@ maintainers: properties: compatible: - const: atmel,at91sam9g46-sha + oneOf: + - const: atmel,at91sam9g46-sha + - items: + - const: microchip,sam9x7-sha + - const: atmel,at91sam9g46-sha reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml index 3d6ed24b1b00..6a441f79efea 100644 --- a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml @@ -12,7 +12,11 @@ maintainers: properties: compatible: - const: atmel,at91sam9g46-tdes + oneOf: + - const: atmel,at91sam9g46-tdes + - items: + - const: microchip,sam9x7-tdes + - const: atmel,at91sam9g46-tdes reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml index 09e43157cc71..e91bc7dc6ad3 100644 --- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml @@ -14,6 +14,7 @@ properties: items: - enum: - qcom,sa8775p-inline-crypto-engine + - qcom,sc7180-inline-crypto-engine - qcom,sm8450-inline-crypto-engine - qcom,sm8550-inline-crypto-engine - qcom,sm8650-inline-crypto-engine diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml index a48bd381063a..e285e382d4ec 100644 --- a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml @@ -45,6 +45,7 @@ properties: - items: - enum: - qcom,sc7280-qce + - qcom,sm6350-qce - qcom,sm8250-qce - qcom,sm8350-qce - qcom,sm8450-qce diff --git a/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml b/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml index 3ce45456d867..b38f8252342e 100644 --- a/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml +++ b/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml @@ -21,6 +21,10 @@ properties: - enum: - microchip,sama7g5-trng - const: atmel,at91sam9g45-trng + - items: + - enum: + - microchip,sam9x7-trng + - const: microchip,sam9x60-trng clocks: maxItems: 1 |