diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/sound/alsa/ALSA-Configuration.txt | 17 | ||||
| -rw-r--r-- | Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl | 4 |
2 files changed, 16 insertions, 5 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 0bbee38acd26..72aff61e7315 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -753,8 +753,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. [Multiple options for each card instance] model - force the model name - position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size) + position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF) probe_mask - Bitmask to probe codecs (default = -1, meaning all slots) + bdl_pos_adj - Specifies the DMA IRQ timing delay in samples. + Passing -1 will make the driver to choose the appropriate + value based on the controller chip. [Single (global) options] single_cmd - Use single immediate commands to communicate with @@ -845,7 +848,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ALC269 basic Basic preset - ALC662 + ALC662/663 3stack-dig 3-stack (2-channel) with SPDIF 3stack-6ch 3-stack (6-channel) 3stack-6ch-dig 3-stack (6-channel) with SPDIF @@ -853,6 +856,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. lenovo-101e Lenovo laptop eeepc-p701 ASUS Eeepc P701 eeepc-ep20 ASUS Eeepc EP20 + m51va ASUS M51VA + g71v ASUS G71V + h13 ASUS H13 + g50v ASUS G50V auto auto-config reading BIOS (default) ALC882/885 @@ -1091,7 +1098,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. This occurs when the access to non-existing or non-working codec slot (likely a modem one) causes a stall of the communication via HD-audio bus. You can see which codec slots are probed by enabling - CONFIG_SND_DEBUG_DETECT, or simply from the file name of the codec + CONFIG_SND_DEBUG_VERBOSE, or simply from the file name of the codec proc files. Then limit the slots to probe by probe_mask option. For example, probe_mask=1 means to probe only the first slot, and probe_mask=4 means only the third slot. @@ -2267,6 +2274,10 @@ case above again, the first two slots are already reserved. If any other driver (e.g. snd-usb-audio) is loaded before snd-interwave or snd-ens1371, it will be assigned to the third or later slot. +When a module name is given with '!', the slot will be given for any +modules but that name. For example, "slots=!snd-pcsp" will reserve +the first slot for any modules but snd-pcsp. + ALSA PCM devices to OSS devices mapping ======================================= diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index b03df4d4795c..e13c4e67029f 100644 --- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -6127,8 +6127,8 @@ struct _snd_pcm_runtime { <para> <function>snd_printdd()</function> is compiled in only when - <constant>CONFIG_SND_DEBUG_DETECT</constant> is set. Please note - that <constant>DEBUG_DETECT</constant> is not set as default + <constant>CONFIG_SND_DEBUG_VERBOSE</constant> is set. Please note + that <constant>CONFIG_SND_DEBUG_VERBOSE</constant> is not set as default even if you configure the alsa-driver with <option>--with-debug=full</option> option. You need to give explicitly <option>--with-debug=detect</option> option instead. |