diff options
| -rw-r--r-- | drivers/ata/ahci.c | 38 | ||||
| -rw-r--r-- | drivers/ata/libahci_platform.c | 5 | ||||
| -rw-r--r-- | drivers/ata/libata-core.c | 2 | ||||
| -rw-r--r-- | drivers/ata/sata_mv.c | 13 | ||||
| -rw-r--r-- | drivers/ata/sata_rcar.c | 15 |
5 files changed, 62 insertions, 11 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 2fc52407306c..c69954023c2e 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1364,6 +1364,40 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host) {} #endif +/* + * On the Acer Aspire Switch Alpha 12, sometimes all SATA ports are detected + * as DUMMY, or detected but eventually get a "link down" and never get up + * again. When this happens, CAP.NP may hold a value of 0x00 or 0x01, and the + * port_map may hold a value of 0x00. + * + * Overriding CAP.NP to 0x02 and the port_map to 0x7 will reveal all 3 ports + * and can significantly reduce the occurrence of the problem. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=189471 + */ +static void acer_sa5_271_workaround(struct ahci_host_priv *hpriv, + struct pci_dev *pdev) +{ + static const struct dmi_system_id sysids[] = { + { + .ident = "Acer Switch Alpha 12", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Switch SA5-271") + }, + }, + { } + }; + + if (dmi_check_system(sysids)) { + dev_info(&pdev->dev, "enabling Acer Switch Alpha 12 workaround\n"); + if ((hpriv->saved_cap & 0xC734FF00) == 0xC734FF00) { + hpriv->port_map = 0x7; + hpriv->cap = 0xC734FF02; + } + } +} + #ifdef CONFIG_ARM64 /* * Due to ERRATA#22536, ThunderX needs to handle HOST_IRQ_STAT differently. @@ -1636,6 +1670,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) "online status unreliable, applying workaround\n"); } + + /* Acer SA5-271 workaround modifies private_data */ + acer_sa5_271_workaround(hpriv, pdev); + /* CAP.NP sometimes indicate the index of the last enabled * port, at other times, that of the last possible port, so * determining the maximum port number requires looking at diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index aaa761b9081c..cd2eab6aa92e 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -514,8 +514,9 @@ int ahci_platform_init_host(struct platform_device *pdev, irq = platform_get_irq(pdev, 0); if (irq <= 0) { - dev_err(dev, "no irq\n"); - return -EINVAL; + if (irq != -EPROBE_DEFER) + dev_err(dev, "no irq\n"); + return irq; } hpriv->irq = irq; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 2d83b8c75965..e157a0e44419 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6800,7 +6800,7 @@ static int __init ata_parse_force_one(char **cur, } force_ent->port = simple_strtoul(id, &endp, 10); - if (p == endp || *endp != '\0') { + if (id == endp || *endp != '\0') { *reason = "invalid port/link"; return -EINVAL; } diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index b66bcda88320..3b2246dded74 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -4067,7 +4067,6 @@ static int mv_platform_probe(struct platform_device *pdev) struct ata_host *host; struct mv_host_priv *hpriv; struct resource *res; - void __iomem *mmio; int n_ports = 0, irq = 0; int rc; int port; @@ -4086,9 +4085,8 @@ static int mv_platform_probe(struct platform_device *pdev) * Get the register base first */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - mmio = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(mmio)) - return PTR_ERR(mmio); + if (res == NULL) + return -EINVAL; /* allocate host */ if (pdev->dev.of_node) { @@ -4132,7 +4130,12 @@ static int mv_platform_probe(struct platform_device *pdev) hpriv->board_idx = chip_soc; host->iomap = NULL; - hpriv->base = mmio - SATAHC0_REG_BASE; + hpriv->base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!hpriv->base) + return -ENOMEM; + + hpriv->base -= SATAHC0_REG_BASE; hpriv->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(hpriv->clk)) diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index 5d38245a7a73..b7939a2c1fab 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -890,7 +890,10 @@ static int sata_rcar_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failed to get access to sata clock\n"); return PTR_ERR(priv->clk); } - clk_prepare_enable(priv->clk); + + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; host = ata_host_alloc(&pdev->dev, 1); if (!host) { @@ -970,8 +973,11 @@ static int sata_rcar_resume(struct device *dev) struct ata_host *host = dev_get_drvdata(dev); struct sata_rcar_priv *priv = host->private_data; void __iomem *base = priv->base; + int ret; - clk_prepare_enable(priv->clk); + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; /* ack and mask */ iowrite32(0, base + SATAINTSTAT_REG); @@ -988,8 +994,11 @@ static int sata_rcar_restore(struct device *dev) { struct ata_host *host = dev_get_drvdata(dev); struct sata_rcar_priv *priv = host->private_data; + int ret; - clk_prepare_enable(priv->clk); + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; sata_rcar_setup_port(host); |