diff options
| -rw-r--r-- | arch/arm/mach-mvebu/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/of/Kconfig | 16 | ||||
| -rw-r--r-- | drivers/of/Makefile | 2 | ||||
| -rw-r--r-- | drivers/of/address.c | 8 | ||||
| -rw-r--r-- | drivers/of/of_pci.c | 384 | ||||
| -rw-r--r-- | drivers/of/of_pci_irq.c | 131 | ||||
| -rw-r--r-- | drivers/pci/of.c | 515 | ||||
| -rw-r--r-- | include/linux/of_pci.h | 2 |
8 files changed, 517 insertions, 542 deletions
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 9b49867154bf..6b32dc527edc 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -10,7 +10,6 @@ menuconfig ARCH_MVEBU select ZONE_DMA if ARM_LPAE select GPIOLIB select PCI_QUIRKS if PCI - select OF_ADDRESS_PCI if ARCH_MVEBU diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index ad9a9578f9c4..ee244c2e8c2b 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -62,10 +62,6 @@ config OF_DYNAMIC config OF_ADDRESS def_bool y depends on !SPARC && HAS_IOMEM - select OF_ADDRESS_PCI if PCI - -config OF_ADDRESS_PCI - bool config OF_IRQ def_bool y @@ -82,18 +78,6 @@ config OF_MDIO help OpenFirmware MDIO bus (Ethernet PHY) accessors -config OF_PCI - def_tristate PCI - depends on PCI - help - OpenFirmware PCI bus accessors - -config OF_PCI_IRQ - def_tristate PCI - depends on OF_PCI && OF_IRQ - help - OpenFirmware PCI IRQ routing helpers - config OF_RESERVED_MEM depends on OF_EARLY_FLATTREE bool diff --git a/drivers/of/Makefile b/drivers/of/Makefile index 63a4be62ce19..663a4af0cccd 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -10,8 +10,6 @@ obj-$(CONFIG_OF_IRQ) += irq.o obj-$(CONFIG_OF_NET) += of_net.o obj-$(CONFIG_OF_UNITTEST) += unittest.o obj-$(CONFIG_OF_MDIO) += of_mdio.o -obj-$(CONFIG_OF_PCI) += of_pci.o -obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o obj-$(CONFIG_OF_RESOLVE) += resolver.o obj-$(CONFIG_OF_OVERLAY) += overlay.o diff --git a/drivers/of/address.c b/drivers/of/address.c index fa6cabfc3cb9..8591afbdfe99 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -96,7 +96,7 @@ static unsigned int of_bus_default_get_flags(const __be32 *addr) return IORESOURCE_MEM; } -#ifdef CONFIG_OF_ADDRESS_PCI +#ifdef CONFIG_PCI /* * PCI bus specific translator */ @@ -171,9 +171,7 @@ static int of_bus_pci_translate(__be32 *addr, u64 offset, int na) { return of_bus_default_translate(addr + 1, offset, na - 1); } -#endif /* CONFIG_OF_ADDRESS_PCI */ -#ifdef CONFIG_PCI const __be32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, unsigned int *flags) { @@ -426,7 +424,7 @@ static unsigned int of_bus_isa_get_flags(const __be32 *addr) */ static struct of_bus of_busses[] = { -#ifdef CONFIG_OF_ADDRESS_PCI +#ifdef CONFIG_PCI /* PCI */ { .name = "pci", @@ -437,7 +435,7 @@ static struct of_bus of_busses[] = { .translate = of_bus_pci_translate, .get_flags = of_bus_pci_get_flags, }, -#endif /* CONFIG_OF_ADDRESS_PCI */ +#endif /* CONFIG_PCI */ /* ISA */ { .name = "isa", diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c deleted file mode 100644 index a7b1cb6c2f65..000000000000 --- a/drivers/of/of_pci.c +++ /dev/null @@ -1,384 +0,0 @@ -#define pr_fmt(fmt) "OF: PCI: " fmt - -#include <linux/kernel.h> -#include <linux/export.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_device.h> -#include <linux/of_pci.h> -#include <linux/slab.h> - -static inline int __of_pci_pci_compare(struct device_node *node, - unsigned int data) -{ - int devfn; - - devfn = of_pci_get_devfn(node); - if (devfn < 0) - return 0; - - return devfn == data; -} - -struct device_node *of_pci_find_child_device(struct device_node *parent, - unsigned int devfn) -{ - struct device_node *node, *node2; - - for_each_child_of_node(parent, node) { - if (__of_pci_pci_compare(node, devfn)) - return node; - /* - * Some OFs create a parent node "multifunc-device" as - * a fake root for all functions of a multi-function - * device we go down them as well. - */ - if (!strcmp(node->name, "multifunc-device")) { - for_each_child_of_node(node, node2) { - if (__of_pci_pci_compare(node2, devfn)) { - of_node_put(node); - return node2; - } - } - } - } - return NULL; -} -EXPORT_SYMBOL_GPL(of_pci_find_child_device); - -/** - * of_pci_get_devfn() - Get device and function numbers for a device node - * @np: device node - * - * Parses a standard 5-cell PCI resource and returns an 8-bit value that can - * be passed to the PCI_SLOT() and PCI_FUNC() macros to extract the device - * and function numbers respectively. On error a negative error code is - * returned. - */ -int of_pci_get_devfn(struct device_node *np) -{ - u32 reg[5]; - int error; - - error = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg)); - if (error) - return error; - - return (reg[0] >> 8) & 0xff; -} -EXPORT_SYMBOL_GPL(of_pci_get_devfn); - -/** - * of_pci_parse_bus_range() - parse the bus-range property of a PCI device - * @node: device node - * @res: address to a struct resource to return the bus-range - * - * Returns 0 on success or a negative error-code on failure. - */ -int of_pci_parse_bus_range(struct device_node *node, struct resource *res) -{ - u32 bus_range[2]; - int error; - - error = of_property_read_u32_array(node, "bus-range", bus_range, - ARRAY_SIZE(bus_range)); - if (error) - return error; - - res->name = node->name; - res->start = bus_range[0]; - res->end = bus_range[1]; - res->flags = IORESOURCE_BUS; - - return 0; -} -EXPORT_SYMBOL_GPL(of_pci_parse_bus_range); - -/** - * This function will try to obtain the host bridge domain number by - * finding a property called "linux,pci-domain" of the given device node. - * - * @node: device tree node with the domain information - * - * Returns the associated domain number from DT in the range [0-0xffff], or - * a negative value if the required property is not found. - */ -int of_get_pci_domain_nr(struct device_node *node) -{ - u32 domain; - int error; - - error = of_property_read_u32(node, "linux,pci-domain", &domain); - if (error) - return error; - - return (u16)domain; -} -EXPORT_SYMBOL_GPL(of_get_pci_domain_nr); - -/** - * This function will try to find the limitation of link speed by finding - * a property called "max-link-speed" of the given device node. - * - * @node: device tree node with the max link speed information - * - * Returns the associated max link speed from DT, or a negative value if the - * required property is not found or is invalid. - */ -int of_pci_get_max_link_speed(struct device_node *node) -{ - u32 max_link_speed; - - if (of_property_read_u32(node, "max-link-speed", &max_link_speed) || - max_link_speed > 4) - return -EINVAL; - - return max_link_speed; -} -EXPORT_SYMBOL_GPL(of_pci_get_max_link_speed); - -/** - * of_pci_check_probe_only - Setup probe only mode if linux,pci-probe-only - * is present and valid - */ -void of_pci_check_probe_only(void) -{ - u32 val; - int ret; - - ret = of_property_read_u32(of_chosen, "linux,pci-probe-only", &val); - if (ret) { - if (ret == -ENODATA || ret == -EOVERFLOW) - pr_warn("linux,pci-probe-only without valid value, ignoring\n"); - return; - } - - if (val) - pci_add_flags(PCI_PROBE_ONLY); - else - pci_clear_flags(PCI_PROBE_ONLY); - - pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis"); -} -EXPORT_SYMBOL_GPL(of_pci_check_probe_only); - -#if defined(CONFIG_OF_ADDRESS) -/** - * of_pci_get_host_bridge_resources - Parse PCI host bridge resources from DT - * @dev: device node of the host bridge having the range property - * @busno: bus number associated with the bridge root bus - * @bus_max: maximum number of buses for this bridge - * @resources: list where the range of resources will be added after DT parsing - * @io_base: pointer to a variable that will contain on return the physical - * address for the start of the I/O range. Can be NULL if the caller doesn't - * expect IO ranges to be present in the device tree. - * - * It is the caller's job to free the @resources list. - * - * This function will parse the "ranges" property of a PCI host bridge device - * node and setup the resource mapping based on its content. It is expected - * that the property conforms with the Power ePAPR document. - * - * It returns zero if the range parsing has been successful or a standard error - * value if it failed. - */ -int of_pci_get_host_bridge_resources(struct device_node *dev, - unsigned char busno, unsigned char bus_max, - struct list_head *resources, resource_size_t *io_base) -{ - struct resource_entry *window; - struct resource *res; - struct resource *bus_range; - struct of_pci_range range; - struct of_pci_range_parser parser; - char range_type[4]; - int err; - - if (io_base) - *io_base = (resource_size_t)OF_BAD_ADDR; - - bus_range = kzalloc(sizeof(*bus_range), GFP_KERNEL); - if (!bus_range) - return -ENOMEM; - - pr_info("host bridge %pOF ranges:\n", dev); - - err = of_pci_parse_bus_range(dev, bus_range); - if (err) { - bus_range->start = busno; - bus_range->end = bus_max; - bus_range->flags = IORESOURCE_BUS; - pr_info(" No bus range found for %pOF, using %pR\n", - dev, bus_range); - } else { - if (bus_range->end > bus_range->start + bus_max) - bus_range->end = bus_range->start + bus_max; - } - pci_add_resource(resources, bus_range); - - /* Check for ranges property */ - err = of_pci_range_parser_init(&parser, dev); - if (err) - goto parse_failed; - - pr_debug("Parsing ranges property...\n"); - for_each_of_pci_range(&parser, &range) { - /* Read next ranges element */ - if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO) - snprintf(range_type, 4, " IO"); - else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM) - snprintf(range_type, 4, "MEM"); - else - snprintf(range_type, 4, "err"); - pr_info(" %s %#010llx..%#010llx -> %#010llx\n", range_type, - range.cpu_addr, range.cpu_addr + range.size - 1, - range.pci_addr); - - /* - * If we failed translation or got a zero-sized region - * then skip this range - */ - if (range.cpu_addr == OF_BAD_ADDR || range.size == 0) - continue; - - res = kzalloc(sizeof(struct resource), GFP_KERNEL); - if (!res) { - err = -ENOMEM; - goto parse_failed; - } - - err = of_pci_range_to_resource(&range, dev, res); - if (err) { - kfree(res); - continue; - } - - if (resource_type(res) == IORESOURCE_IO) { - if (!io_base) { - pr_err("I/O range found for %pOF. Please provide an io_base pointer to save CPU base address\n", - dev); - err = -EINVAL; - goto conversion_failed; - } - if (*io_base != (resource_size_t)OF_BAD_ADDR) - pr_warn("More than one I/O resource converted for %pOF. CPU base address for old range lost!\n", - dev); - *io_base = range.cpu_addr; - } - - pci_add_resource_offset(resources, res, res->start - range.pci_addr); - } - - return 0; - -conversion_failed: - kfree(res); -parse_failed: - resource_list_for_each_entry(window, resources) - kfree(window->res); - pci_free_resource_list(resources); - return err; -} -EXPORT_SYMBOL_GPL(of_pci_get_host_bridge_resources); -#endif /* CONFIG_OF_ADDRESS */ - -/** - * of_pci_map_rid - Translate a requester ID through a downstream mapping. - * @np: root complex device node. - * @rid: PCI requester ID to map. - * @map_name: property name of the map to use. - * @map_mask_name: optional property name of the mask to use. - * @target: optional pointer to a target device node. - * @id_out: optional pointer to receive the translated ID. - * - * Given a PCI requester ID, look up the appropriate implementation-defined - * platform ID and/or the target device which receives transactions on that - * ID, as per the "iommu-map" and "msi-map" bindings. Either of @target or - * @id_out may be NULL if only the other is required. If @target points to - * a non-NULL device node pointer, only entries targeting that node will be - * matched; if it points to a NULL value, it will receive the device node of - * the first matching target phandle, with a reference held. - * - * Return: 0 on success or a standard error code on failure. - */ -int of_pci_map_rid(struct device_node *np, u32 rid, - const char *map_name, const char *map_mask_name, - struct device_node **target, u32 *id_out) -{ - u32 map_mask, masked_rid; - int map_len; - const __be32 *map = NULL; - - if (!np || !map_name || (!target && !id_out)) - return -EINVAL; - - map = of_get_property(np, map_name, &map_len); - if (!map) { - if (target) - return -ENODEV; - /* Otherwise, no map implies no translation */ - *id_out = rid; - return 0; - } - - if (!map_len || map_len % (4 * sizeof(*map))) { - pr_err("%pOF: Error: Bad %s length: %d\n", np, - map_name, map_len); - return -EINVAL; - } - - /* The default is to select all bits. */ - map_mask = 0xffffffff; - - /* - * Can be overridden by "{iommu,msi}-map-mask" property. - * If of_property_read_u32() fails, the default is used. - */ - if (map_mask_name) - of_property_read_u32(np, map_mask_name, &map_mask); - - masked_rid = map_mask & rid; - for ( ; map_len > 0; map_len -= 4 * sizeof(*map), map += 4) { - struct device_node *phandle_node; - u32 rid_base = be32_to_cpup(map + 0); - u32 phandle = be32_to_cpup(map + 1); - u32 out_base = be32_to_cpup(map + 2); - u32 rid_len = be32_to_cpup(map + 3); - - if (rid_base & ~map_mask) { - pr_err("%pOF: Invalid %s translation - %s-mask (0x%x) ignores rid-base (0x%x)\n", - np, map_name, map_name, - map_mask, rid_base); - return -EFAULT; - } - - if (masked_rid < rid_base || masked_rid >= rid_base + rid_len) - continue; - - phandle_node = of_find_node_by_phandle(phandle); - if (!phandle_node) - return -ENODEV; - - if (target) { - if (*target) - of_node_put(phandle_node); - else - *target = phandle_node; - - if (*target != phandle_node) - continue; - } - - if (id_out) - *id_out = masked_rid - rid_base + out_base; - - pr_debug("%pOF: %s, using mask %08x, rid-base: %08x, out-base: %08x, length: %08x, rid: %08x -> %08x\n", - np, map_name, map_mask, rid_base, out_base, - rid_len, rid, masked_rid - rid_base + out_base); - return 0; - } - - pr_err("%pOF: Invalid %s translation - no match for rid 0x%x on %pOF\n", - np, map_name, rid, target && *target ? *target : NULL); - return -EFAULT; -} diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c deleted file mode 100644 index 3a05568f65df..000000000000 --- a/drivers/of/of_pci_irq.c +++ /dev/null @@ -1,131 +0,0 @@ -#include <linux/kernel.h> -#include <linux/of_pci.h> -#include <linux/of_irq.h> -#include <linux/export.h> - -/** - * of_irq_parse_pci - Resolve the interrupt for a PCI device - * @pdev: the device whose interrupt is to be resolved - * @out_irq: structure of_irq filled by this function - * - * This function resolves the PCI interrupt for a given PCI device. If a - * device-node exists for a given pci_dev, it will use normal OF tree - * walking. If not, it will implement standard swizzling and walk up the - * PCI tree until an device-node is found, at which point it will finish - * resolving using the OF tree walking. - */ -int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq) -{ - struct device_node *dn, *ppnode; - struct pci_dev *ppdev; - __be32 laddr[3]; - u8 pin; - int rc; - - /* Check if we have a device node, if yes, fallback to standard - * device tree parsing - */ - dn = pci_device_to_OF_node(pdev); - if (dn) { - rc = of_irq_parse_one(dn, 0, out_irq); - if (!rc) - return rc; - } - - /* Ok, we don't, time to have fun. Let's start by building up an - * interrupt spec. we assume #interrupt-cells is 1, which is standard - * for PCI. If you do different, then don't use that routine. - */ - rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); - if (rc != 0) - goto err; - /* No pin, exit with no error message. */ - if (pin == 0) - return -ENODEV; - - /* Now we walk up the PCI tree */ - for (;;) { - /* Get the pci_dev of our parent */ - ppdev = pdev->bus->self; - - /* Ouch, it's a host bridge... */ - if (ppdev == NULL) { - ppnode = pci_bus_to_OF_node(pdev->bus); - - /* No node for host bridge ? give up */ - if (ppnode == NULL) { - rc = -EINVAL; - goto err; - } - } else { - /* We found a P2P bridge, check if it has a node */ - ppnode = pci_device_to_OF_node(ppdev); - } - - /* Ok, we have found a parent with a device-node, hand over to - * the OF parsing code. - * We build a unit address from the linux device to be used for - * resolution. Note that we use the linux bus number which may - * not match your firmware bus numbering. - * Fortunately, in most cases, interrupt-map-mask doesn't - * include the bus number as part of the matching. - * You should still be careful about that though if you intend - * to rely on this function (you ship a firmware that doesn't - * create device nodes for all PCI devices). - */ - if (ppnode) - break; - - /* We can only get here if we hit a P2P bridge with no node, - * let's do standard swizzling and try again - */ - pin = pci_swizzle_interrupt_pin(pdev, pin); - pdev = ppdev; - } - - out_irq->np = ppnode; - out_irq->args_count = 1; - out_irq->args[0] = pin; - laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8)); - laddr[1] = laddr[2] = cpu_to_be32(0); - rc = of_irq_parse_raw(laddr, out_irq); - if (rc) - goto err; - return 0; -err: - if (rc == -ENOENT) { - dev_warn(&pdev->dev, - "%s: no interrupt-map found, INTx interrupts not available\n", - __func__); - pr_warn_once("%s: possibly some PCI slots don't have level triggered interrupts capability\n", - __func__); - } else { - dev_err(&pdev->dev, "%s: failed with rc=%d\n", __func__, rc); - } - return rc; -} -EXPORT_SYMBOL_GPL(of_irq_parse_pci); - -/** - * of_irq_parse_and_map_pci() - Decode a PCI irq from the device tree and map to a virq - * @dev: The pci device needing an irq - * @slot: PCI slot number; passed when used as map_irq callback. Unused - * @pin: PCI irq pin number; passed when used as map_irq callback. Unused - * - * @slot and @pin are unused, but included in the function so that this - * function can be used directly as the map_irq callback to - * pci_assign_irq() and struct pci_host_bridge.map_irq pointer - */ -int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin) -{ - struct of_phandle_args oirq; - int ret; - - ret = of_irq_parse_pci(dev, &oirq); - if (ret) - return 0; /* Proper return code 0 == NO_IRQ */ - - return irq_create_of_mapping(&oirq); -} -EXPORT_SYMBOL_GPL(of_irq_parse_and_map_pci); - diff --git a/drivers/pci/of.c b/drivers/pci/of.c index e112da11630e..79441a556f6f 100644 --- a/drivers/pci/of.c +++ b/drivers/pci/of.c @@ -8,12 +8,14 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ +#define pr_fmt(fmt) "PCI: OF: " fmt #include <linux/irqdomain.h> #include <linux/kernel.h> #include <linux/pci.h> #include <linux/of.h> #include <linux/of_irq.h> +#include <linux/of_address.h> #include <linux/of_pci.h> #include "pci.h" @@ -51,8 +53,9 @@ struct device_node * __weak pcibios_get_phb_of_node(struct pci_bus *bus) if (WARN_ON(bus->self || bus->parent)) return NULL; - /* Look for a node pointer in either the intermediary device we - * create above the root bus or it's own parent. Normally only + /* + * Look for a node pointer in either the intermediary device we + * create above the root bus or its own parent. Normally only * the later is populated. */ if (bus->bridge->of_node) @@ -88,3 +91,511 @@ struct irq_domain *pci_host_bridge_of_msi_domain(struct pci_bus *bus) return NULL; #endif } + + +static inline int __of_pci_pci_compare(struct device_node *node, + unsigned int data) +{ + int devfn; + + devfn = of_pci_get_devfn(node); + if (devfn < 0) + return 0; + + return devfn == data; +} + +struct device_node *of_pci_find_child_device(struct device_node *parent, + unsigned int devfn) +{ + struct device_node *node, *node2; + + for_each_child_of_node(parent, node) { + if (__of_pci_pci_compare(node, devfn)) + return node; + /* + * Some OFs create a parent node "multifunc-device" as + * a fake root for all functions of a multi-function + * device we go down them as well. + */ + if (!strcmp(node->name, "multifunc-device")) { + for_each_child_of_node(node, node2) { + if (__of_pci_pci_compare(node2, devfn)) { + of_node_put(node); + return node2; + } + } + } + } + return NULL; +} +EXPORT_SYMBOL_GPL(of_pci_find_child_device); + +/** + * of_pci_get_devfn() - Get device and function numbers for a device node + * @np: device node + * + * Parses a standard 5-cell PCI resource and returns an 8-bit value that can + * be passed to the PCI_SLOT() and PCI_FUNC() macros to extract the device + * and function numbers respectively. On error a negative error code is + * returned. + */ +int of_pci_get_devfn(struct device_node *np) +{ + u32 reg[5]; + int error; + + error = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg)); + if (error) + return error; + + return (reg[0] >> 8) & 0xff; +} +EXPORT_SYMBOL_GPL(of_pci_get_devfn); + +/** + * of_pci_parse_bus_range() - parse the bus-range property of a PCI device + * @node: device node + * @res: address to a struct resource to return the bus-range + * + * Returns 0 on success or a negative error-code on failure. + */ +int of_pci_parse_bus_range(struct device_node *node, struct resource *res) +{ + u32 bus_range[2]; + int error; + + error = of_property_read_u32_array(node, "bus-range", bus_range, + ARRAY_SIZE(bus_range)); + if (error) + return error; + + res->name = node->name; + res->start = bus_range[0]; + res->end = bus_range[1]; + res->flags = IORESOURCE_BUS; + + return 0; +} +EXPORT_SYMBOL_GPL(of_pci_parse_bus_range); + +/** + * This function will try to obtain the host bridge domain number by + * finding a property called "linux,pci-domain" of the given device node. + * + * @node: device tree node with the domain information + * + * Returns the associated domain number from DT in the range [0-0xffff], or + * a negative value if the required property is not found. + */ +int of_get_pci_domain_nr(struct device_node *node) +{ + u32 domain; + int error; + + error = of_property_read_u32(node, "linux,pci-domain", &domain); + if (error) + return error; + + return (u16)domain; +} +EXPORT_SYMBOL_GPL(of_get_pci_domain_nr); + +/** + * This function will try to find the limitation of link speed by finding + * a property called "max-link-speed" of the given device node. + * + * @node: device tree node with the max link speed information + * + * Returns the associated max link speed from DT, or a negative value if the + * required property is not found or is invalid. + */ +int of_pci_get_max_link_speed(struct device_node *node) +{ + u32 max_link_speed; + + if (of_property_read_u32(node, "max-link-speed", &max_link_speed) || + max_link_speed > 4) + return -EINVAL; + + return max_link_speed; +} +EXPORT_SYMBOL_GPL(of_pci_get_max_link_speed); + +/** + * of_pci_check_probe_only - Setup probe only mode if linux,pci-probe-only + * is present and valid + */ +void of_pci_check_probe_only(void) +{ + u32 val; + int ret; + + ret = of_property_read_u32(of_chosen, "linux,pci-probe-only", &val); + if (ret) { + if (ret == -ENODATA || ret == -EOVERFLOW) + pr_warn("linux,pci-probe-only without valid value, ignoring\n"); + return; + } + + if (val) + pci_add_flags(PCI_PROBE_ONLY); + else + pci_clear_flags(PCI_PROBE_ONLY); + + pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis"); +} +EXPORT_SYMBOL_GPL(of_pci_check_probe_only); + +#if defined(CONFIG_OF_ADDRESS) +/** + * of_pci_get_host_bridge_resources - Parse PCI host bridge resources from DT + * @dev: device node of the host bridge having the range property + * @busno: bus number associated with the bridge root bus + * @bus_max: maximum number of buses for this bridge + * @resources: list where the range of resources will be added after DT parsing + * @io_base: pointer to a variable that will contain on return the physical + * address for the start of the I/O range. Can be NULL if the caller doesn't + * expect I/O ranges to be present in the device tree. + * + * It is the caller's job to free the @resources list. + * + * This function will parse the "ranges" property of a PCI host bridge device + * node and setup the resource mapping based on its content. It is expected + * that the property conforms with the Power ePAPR document. + * + * It returns zero if the range parsing has been successful or a standard error + * value if it failed. + */ +int of_pci_get_host_bridge_resources(struct device_node *dev, + unsigned char busno, unsigned char bus_max, + struct list_head *resources, resource_size_t *io_base) +{ + struct resource_entry *window; + struct resource *res; + struct resource *bus_range; + struct of_pci_range range; + struct of_pci_range_parser parser; + char range_type[4]; + int err; + + if (io_base) + *io_base = (resource_size_t)OF_BAD_ADDR; + + bus_range = kzalloc(sizeof(*bus_range), GFP_KERNEL); + if (!bus_range) + return -ENOMEM; + + pr_info("host bridge %pOF ranges:\n", dev); + + err = of_pci_parse_bus_range(dev, bus_range); + if (err) { + bus_range->start = busno; + bus_range->end = bus_max; + bus_range->flags = IORESOURCE_BUS; + pr_info(" No bus range found for %pOF, using %pR\n", + dev, bus_range); + } else { + if (bus_range->end > bus_range->start + bus_max) + bus_range->end = bus_range->start + bus_max; + } + pci_add_resource(resources, bus_range); + + /* Check for ranges property */ + err = of_pci_range_parser_init(&parser, dev); + if (err) + goto parse_failed; + + pr_debug("Parsing ranges property...\n"); + for_each_of_pci_range(&parser, &range) { + /* Read next ranges element */ + if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO) + snprintf(range_type, 4, " IO"); + else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM) + snprintf(range_type, 4, "MEM"); + else + snprintf(range_type, 4, "err"); + pr_info(" %s %#010llx..%#010llx -> %#010llx\n", range_type, + range.cpu_addr, range.cpu_addr + range.size - 1, + range.pci_addr); + + /* + * If we failed translation or got a zero-sized region + * then skip this range + */ + if (range.cpu_addr == OF_BAD_ADDR || range.size == 0) + continue; + + res = kzalloc(sizeof(struct resource), GFP_KERNEL); + if (!res) { + err = -ENOMEM; + goto parse_failed; + } + + err = of_pci_range_to_resource(&range, dev, res); + if (err) { + kfree(res); + continue; + } + + if (resource_type(res) == IORESOURCE_IO) { + if (!io_base) { + pr_err("I/O range found for %pOF. Please provide an io_base pointer to save CPU base address\n", + dev); + err = -EINVAL; + goto conversion_failed; + } + if (*io_base != (resource_size_t)OF_BAD_ADDR) + pr_warn("More than one I/O resource converted for %pOF. CPU base address for old range lost!\n", + dev); + *io_base = range.cpu_addr; + } + + pci_add_resource_offset(resources, res, res->start - range.pci_addr); + } + + return 0; + +conversion_failed: + kfree(res); +parse_failed: + resource_list_for_each_entry(window, resources) + kfree(window->res); + pci_free_resource_list(resources); + return err; +} +EXPORT_SYMBOL_GPL(of_pci_get_host_bridge_resources); +#endif /* CONFIG_OF_ADDRESS */ + +/** + * of_pci_map_rid - Translate a requester ID through a downstream mapping. + * @np: root complex device node. + * @rid: PCI requester ID to map. + * @map_name: property name of the map to use. + * @map_mask_name: optional property name of the mask to use. + * @target: optional pointer to a target device node. + * @id_out: optional pointer to receive the translated ID. + * + * Given a PCI requester ID, look up the appropriate implementation-defined + * platform ID and/or the target device which receives transactions on that + * ID, as per the "iommu-map" and "msi-map" bindings. Either of @target or + * @id_out may be NULL if only the other is required. If @target points to + * a non-NULL device node pointer, only entries targeting that node will be + * matched; if it points to a NULL value, it will receive the device node of + * the first matching target phandle, with a reference held. + * + * Return: 0 on success or a standard error code on failure. + */ +int of_pci_map_rid(struct device_node *np, u32 rid, + const char *map_name, const char *map_mask_name, + struct device_node **target, u32 *id_out) +{ + u32 map_mask, masked_rid; + int map_len; + const __be32 *map = NULL; + + if (!np || !map_name || (!target && !id_out)) + return -EINVAL; + + map = of_get_property(np, map_name, &map_len); + if (!map) { + if (target) + return -ENODEV; + /* Otherwise, no map implies no translation */ + *id_out = rid; + return 0; + } + + if (!map_len || map_len % (4 * sizeof(*map))) { + pr_err("%pOF: Error: Bad %s length: %d\n", np, + map_name, map_len); + return -EINVAL; + } + + /* The default is to select all bits. */ + map_mask = 0xffffffff; + + /* + * Can be overridden by "{iommu,msi}-map-mask" property. + * If of_property_read_u32() fails, the default is used. + */ + if (map_mask_name) + of_property_read_u32(np, map_mask_name, &map_mask); + + masked_rid = map_mask & rid; + for ( ; map_len > 0; map_len -= 4 * sizeof(*map), map += 4) { + struct device_node *phandle_node; + u32 rid_base = be32_to_cpup(map + 0); + u32 phandle = be32_to_cpup(map + 1); + u32 out_base = be32_to_cpup(map + 2); + u32 rid_len = be32_to_cpup(map + 3); + + if (rid_base & ~map_mask) { + pr_err("%pOF: Invalid %s translation - %s-mask (0x%x) ignores rid-base (0x%x)\n", + np, map_name, map_name, + map_mask, rid_base); + return -EFAULT; + } + + if (masked_rid < rid_base || masked_rid >= rid_base + rid_len) + continue; + + phandle_node = of_find_node_by_phandle(phandle); + if (!phandle_node) + return -ENODEV; + + if (target) { + if (*target) + of_node_put(phandle_node); + else + *target = phandle_node; + + if (*target != phandle_node) + continue; + } + + if (id_out) + *id_out = masked_rid - rid_base + out_base; + + pr_debug("%pOF: %s, using mask %08x, rid-base: %08x, out-base: %08x, length: %08x, rid: %08x -> %08x\n", + np, map_name, map_mask, rid_base, out_base, + rid_len, rid, masked_rid - rid_base + out_base); + return 0; + } + + pr_err("%pOF: Invalid %s translation - no match for rid 0x%x on %pOF\n", + np, map_name, rid, target && *target ? *target : NULL); + return -EFAULT; +} + +#if IS_ENABLED(CONFIG_OF_IRQ) +/** + * of_irq_parse_pci - Resolve the interrupt for a PCI device + * @pdev: the device whose interrupt is to be resolved + * @out_irq: structure of_irq filled by this function + * + * This function resolves the PCI interrupt for a given PCI device. If a + * device-node exists for a given pci_dev, it will use normal OF tree + * walking. If not, it will implement standard swizzling and walk up the + * PCI tree until an device-node is found, at which point it will finish + * resolving using the OF tree walking. + */ +int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq) +{ + struct device_node *dn, *ppnode; + struct pci_dev *ppdev; + __be32 laddr[3]; + u8 pin; + int rc; + + /* + * Check if we have a device node, if yes, fallback to standard + * device tree parsing + */ + dn = pci_device_to_OF_node(pdev); + if (dn) { + rc = of_irq_parse_one(dn, 0, out_irq); + if (!rc) + return rc; + } + + /* + * Ok, we don't, time to have fun. Let's start by building up an + * interrupt spec. we assume #interrupt-cells is 1, which is standard + * for PCI. If you do different, then don't use that routine. + */ + rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); + if (rc != 0) + goto err; + /* No pin, exit with no error message. */ + if (pin == 0) + return -ENODEV; + + /* Now we walk up the PCI tree */ + for (;;) { + /* Get the pci_dev of our parent */ + ppdev = pdev->bus->self; + + /* Ouch, it's a host bridge... */ + if (ppdev == NULL) { + ppnode = pci_bus_to_OF_node(pdev->bus); + + /* No node for host bridge ? give up */ + if (ppnode == NULL) { + rc = -EINVAL; + goto err; + } + } else { + /* We found a P2P bridge, check if it has a node */ + ppnode = pci_device_to_OF_node(ppdev); + } + + /* + * Ok, we have found a parent with a device-node, hand over to + * the OF parsing code. + * We build a unit address from the linux device to be used for + * resolution. Note that we use the linux bus number which may + * not match your firmware bus numbering. + * Fortunately, in most cases, interrupt-map-mask doesn't + * include the bus number as part of the matching. + * You should still be careful about that though if you intend + * to rely on this function (you ship a firmware that doesn't + * create device nodes for all PCI devices). + */ + if (ppnode) + break; + + /* + * We can only get here if we hit a P2P bridge with no node; + * let's do standard swizzling and try again + */ + pin = pci_swizzle_interrupt_pin(pdev, pin); + pdev = ppdev; + } + + out_irq->np = ppnode; + out_irq->args_count = 1; + out_irq->args[0] = pin; + laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8)); + laddr[1] = laddr[2] = cpu_to_be32(0); + rc = of_irq_parse_raw(laddr, out_irq); + if (rc) + goto err; + return 0; +err: + if (rc == -ENOENT) { + dev_warn(&pdev->dev, + "%s: no interrupt-map found, INTx interrupts not available\n", + __func__); + pr_warn_once("%s: possibly some PCI slots don't have level triggered interrupts capability\n", + __func__); + } else { + dev_err(&pdev->dev, "%s: failed with rc=%d\n", __func__, rc); + } + return rc; +} +EXPORT_SYMBOL_GPL(of_irq_parse_pci); + +/** + * of_irq_parse_and_map_pci() - Decode a PCI IRQ from the device tree and map to a VIRQ + * @dev: The PCI device needing an IRQ + * @slot: PCI slot number; passed when used as map_irq callback. Unused + * @pin: PCI IRQ pin number; passed when used as map_irq callback. Unused + * + * @slot and @pin are unused, but included in the function so that this + * function can be used directly as the map_irq callback to + * pci_assign_irq() and struct pci_host_bridge.map_irq pointer + */ +int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin) +{ + struct of_phandle_args oirq; + int ret; + + ret = of_irq_parse_pci(dev, &oirq); + if (ret) + return 0; /* Proper return code 0 == NO_IRQ */ + + return irq_create_of_mapping(&oirq); +} +EXPORT_SYMBOL_GPL(of_irq_parse_and_map_pci); +#endif /* CONFIG_OF_IRQ */ diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h index bf588a05d0d0..f0e129e848ea 100644 --- a/include/linux/of_pci.h +++ b/include/linux/of_pci.h @@ -9,7 +9,7 @@ struct pci_dev; struct of_phandle_args; struct device_node; -#ifdef CONFIG_OF_PCI +#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_PCI) int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq); struct device_node *of_pci_find_child_device(struct device_node *parent, unsigned int devfn); |