diff options
| -rw-r--r-- | drivers/firmware/qcom_scm-32.c | 143 | ||||
| -rw-r--r-- | drivers/firmware/qcom_scm.c | 6 | ||||
| -rw-r--r-- | drivers/firmware/qcom_scm.h | 10 |
3 files changed, 53 insertions, 106 deletions
diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c index 4388d13b437a..83a9351b9442 100644 --- a/drivers/firmware/qcom_scm-32.c +++ b/drivers/firmware/qcom_scm-32.c @@ -23,8 +23,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/qcom_scm.h> - -#include <asm/cacheflush.h> +#include <linux/dma-mapping.h> #include "qcom_scm.h" @@ -97,44 +96,6 @@ struct qcom_scm_response { }; /** - * alloc_qcom_scm_command() - Allocate an SCM command - * @cmd_size: size of the command buffer - * @resp_size: size of the response buffer - * - * Allocate an SCM command, including enough room for the command - * and response headers as well as the command and response buffers. - * - * Returns a valid &qcom_scm_command on success or %NULL if the allocation fails. - */ -static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size) -{ - struct qcom_scm_command *cmd; - size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size + - resp_size; - u32 offset; - - cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL); - if (cmd) { - cmd->len = cpu_to_le32(len); - offset = offsetof(struct qcom_scm_command, buf); - cmd->buf_offset = cpu_to_le32(offset); - cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size); - } - return cmd; -} - -/** - * free_qcom_scm_command() - Free an SCM command - * @cmd: command to free - * - * Free an SCM command. - */ -static inline void free_qcom_scm_command(struct qcom_scm_command *cmd) -{ - kfree(cmd); -} - -/** * qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response * @cmd: command * @@ -192,45 +153,9 @@ static u32 smc(u32 cmd_addr) return r0; } -static int __qcom_scm_call(const struct qcom_scm_command *cmd) -{ - int ret; - u32 cmd_addr = virt_to_phys(cmd); - - /* - * Flush the command buffer so that the secure world sees - * the correct data. - */ - secure_flush_area(cmd, cmd->len); - - ret = smc(cmd_addr); - if (ret < 0) - ret = qcom_scm_remap_error(ret); - - return ret; -} - -static void qcom_scm_inv_range(unsigned long start, unsigned long end) -{ - u32 cacheline_size, ctr; - - asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr)); - cacheline_size = 4 << ((ctr >> 16) & 0xf); - - start = round_down(start, cacheline_size); - end = round_up(end, cacheline_size); - outer_inv_range(start, end); - while (start < end) { - asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) - : "memory"); - start += cacheline_size; - } - dsb(); - isb(); -} - /** * qcom_scm_call() - Send an SCM command + * @dev: struct device * @svc_id: service identifier * @cmd_id: command identifier * @cmd_buf: command buffer @@ -247,42 +172,59 @@ static void qcom_scm_inv_range(unsigned long start, unsigned long end) * and response buffers is taken care of by qcom_scm_call; however, callers are * responsible for any other cached buffers passed over to the secure world. */ -static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, - size_t cmd_len, void *resp_buf, size_t resp_len) +static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id, + const void *cmd_buf, size_t cmd_len, void *resp_buf, + size_t resp_len) { int ret; struct qcom_scm_command *cmd; struct qcom_scm_response *rsp; - unsigned long start, end; + size_t alloc_len = sizeof(*cmd) + cmd_len + sizeof(*rsp) + resp_len; + dma_addr_t cmd_phys; - cmd = alloc_qcom_scm_command(cmd_len, resp_len); + cmd = kzalloc(PAGE_ALIGN(alloc_len), GFP_KERNEL); if (!cmd) return -ENOMEM; + cmd->len = cpu_to_le32(alloc_len); + cmd->buf_offset = cpu_to_le32(sizeof(*cmd)); + cmd->resp_hdr_offset = cpu_to_le32(sizeof(*cmd) + cmd_len); + cmd->id = cpu_to_le32((svc_id << 10) | cmd_id); if (cmd_buf) memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len); + rsp = qcom_scm_command_to_response(cmd); + + cmd_phys = dma_map_single(dev, cmd, alloc_len, DMA_TO_DEVICE); + if (dma_mapping_error(dev, cmd_phys)) { + kfree(cmd); + return -ENOMEM; + } + mutex_lock(&qcom_scm_lock); - ret = __qcom_scm_call(cmd); + ret = smc(cmd_phys); + if (ret < 0) + ret = qcom_scm_remap_error(ret); mutex_unlock(&qcom_scm_lock); if (ret) goto out; - rsp = qcom_scm_command_to_response(cmd); - start = (unsigned long)rsp; - do { - qcom_scm_inv_range(start, start + sizeof(*rsp)); + dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len, + sizeof(*rsp), DMA_FROM_DEVICE); } while (!rsp->is_complete); - end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len; - qcom_scm_inv_range(start, end); - - if (resp_buf) - memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len); + if (resp_buf) { + dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len + + le32_to_cpu(rsp->buf_offset), + resp_len, DMA_FROM_DEVICE); + memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), + resp_len); + } out: - free_qcom_scm_command(cmd); + dma_unmap_single(dev, cmd_phys, alloc_len, DMA_TO_DEVICE); + kfree(cmd); return ret; } @@ -437,7 +379,8 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus) * Set the Linux entry point for the SCM to transfer control to when coming * out of a power down. CPU power down may be executed on cpuidle or hotplug. */ -int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus) +int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry, + const cpumask_t *cpus) { int ret; int flags = 0; @@ -463,7 +406,7 @@ int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus) cmd.addr = cpu_to_le32(virt_to_phys(entry)); cmd.flags = cpu_to_le32(flags); - ret = qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR, + ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR, &cmd, sizeof(cmd), NULL, 0); if (!ret) { for_each_cpu(cpu, cpus) @@ -487,25 +430,27 @@ void __qcom_scm_cpu_power_down(u32 flags) flags & QCOM_SCM_FLUSH_FLAG_MASK); } -int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id) +int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id) { int ret; __le32 svc_cmd = cpu_to_le32((svc_id << 10) | cmd_id); __le32 ret_val = 0; - ret = qcom_scm_call(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, &svc_cmd, - sizeof(svc_cmd), &ret_val, sizeof(ret_val)); + ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, + &svc_cmd, sizeof(svc_cmd), &ret_val, + sizeof(ret_val)); if (ret) return ret; return le32_to_cpu(ret_val); } -int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp) +int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req, + u32 req_cnt, u32 *resp) { if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT) return -ERANGE; - return qcom_scm_call(QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, + return qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, req, req_cnt * sizeof(*req), resp, sizeof(*resp)); } diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c index c4ec60d220e3..937c64a78abf 100644 --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c @@ -89,7 +89,7 @@ EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr); */ int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus) { - return __qcom_scm_set_warm_boot_addr(entry, cpus); + return __qcom_scm_set_warm_boot_addr(__scm->dev, entry, cpus); } EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr); @@ -119,7 +119,7 @@ bool qcom_scm_hdcp_available(void) if (ret) return ret; - ret = __qcom_scm_is_call_available(QCOM_SCM_SVC_HDCP, + ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP); qcom_scm_clk_disable(); @@ -143,7 +143,7 @@ int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp) if (ret) return ret; - ret = __qcom_scm_hdcp_req(req, req_cnt, resp); + ret = __qcom_scm_hdcp_req(__scm->dev, req, req_cnt, resp); qcom_scm_clk_disable(); return ret; } diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h index 7dcc73381b7a..afe6676fb396 100644 --- a/drivers/firmware/qcom_scm.h +++ b/drivers/firmware/qcom_scm.h @@ -19,7 +19,8 @@ #define QCOM_SCM_FLAG_HLOS 0x01 #define QCOM_SCM_FLAG_COLDBOOT_MC 0x02 #define QCOM_SCM_FLAG_WARMBOOT_MC 0x04 -extern int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus); +extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry, + const cpumask_t *cpus); extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus); #define QCOM_SCM_CMD_TERMINATE_PC 0x2 @@ -29,12 +30,13 @@ extern void __qcom_scm_cpu_power_down(u32 flags); #define QCOM_SCM_SVC_INFO 0x6 #define QCOM_IS_CALL_AVAIL_CMD 0x1 -extern int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id); +extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, + u32 cmd_id); #define QCOM_SCM_SVC_HDCP 0x11 #define QCOM_SCM_CMD_HDCP 0x01 -extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, - u32 *resp); +extern int __qcom_scm_hdcp_req(struct device *dev, + struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp); /* common error codes */ #define QCOM_SCM_ENOMEM -5 |