Merge tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver pull request for 5.4-rc1.

  As has been happening in previous releases, more and more individual
  driver subsystem trees are ending up in here. Now if that is good or
  bad I can't tell, but hopefully it makes your life easier as it's more
  of an aggregation of trees together to one merge point for you.

  Anyway, lots of stuff in here:
     - habanalabs driver updates
     - thunderbolt driver updates
     - misc driver updates
     - coresight and intel_th hwtracing driver updates
     - fpga driver updates
     - extcon driver updates
     - some dma driver updates
     - char driver updates
     - android binder driver updates
     - nvmem driver updates
     - phy driver updates
     - parport driver fixes
     - pcmcia driver fix
     - uio driver updates
     - w1 driver updates
     - configfs fixes
     - other assorted driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits)
  misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation
  habanalabs: correctly cast variable to __le32
  habanalabs: show correct id in error print
  habanalabs: stop using the acronym KMD
  habanalabs: display card name as sensors header
  habanalabs: add uapi to retrieve aggregate H/W events
  habanalabs: add uapi to retrieve device utilization
  habanalabs: Make the Coresight timestamp perpetual
  habanalabs: explicitly set the queue-id enumerated numbers
  habanalabs: print to kernel log when reset is finished
  habanalabs: replace __le32_to_cpu with le32_to_cpu
  habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64
  habanalabs: Handle HW_IP_INFO if device disabled or in reset
  habanalabs: Expose devices after initialization is done
  habanalabs: improve security in Debug IOCTL
  habanalabs: use default structure for user input in Debug IOCTL
  habanalabs: Add descriptive name to PSOC app status register
  habanalabs: Add descriptive names to PSOC scratch-pad registers
  habanalabs: create two char devices per ASIC
  habanalabs: change device_setup_cdev() to be more generic
  ...

2 files changed, 66 insertions, 2 deletions

diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh
index f901076aa2ea..56894477c8bd 100755
--- a/tools/testing/selftests/firmware/fw_filesystem.sh
+++ b/tools/testing/selftests/firmware/fw_filesystem.sh
@@ -116,6 +116,16 @@ config_set_name()
 	echo -n $1 >  $DIR/config_name
 }
 
+config_set_into_buf()
+{
+	echo 1 >  $DIR/config_into_buf
+}
+
+config_unset_into_buf()
+{
+	echo 0 >  $DIR/config_into_buf
+}
+
 config_set_sync_direct()
 {
 	echo 1 >  $DIR/config_sync_direct
@@ -153,11 +163,14 @@ config_set_read_fw_idx()
 
 read_firmwares()
 {
-	if [ "$1" = "xzonly" ]; then
-		fwfile="${FW}-orig"
+	if [ "$(cat $DIR/config_into_buf)" == "1" ]; then
+		fwfile="$FW_INTO_BUF"
 	else
 		fwfile="$FW"
 	fi
+	if [ "$1" = "xzonly" ]; then
+		fwfile="${fwfile}-orig"
+	fi
 	for i in $(seq 0 3); do
 		config_set_read_fw_idx $i
 		# Verify the contents are what we expect.
@@ -194,6 +207,18 @@ test_batched_request_firmware_nofile()
 	echo "OK"
 }
 
+test_batched_request_firmware_into_buf_nofile()
+{
+	echo -n "Batched request_firmware_into_buf() nofile try #$1: "
+	config_reset
+	config_set_name nope-test-firmware.bin
+	config_set_into_buf
+	config_trigger_sync
+	read_firmwares_expect_nofile
+	release_all_firmware
+	echo "OK"
+}
+
 test_batched_request_firmware_direct_nofile()
 {
 	echo -n "Batched request_firmware_direct() nofile try #$1: "
@@ -259,6 +284,18 @@ test_batched_request_firmware()
 	echo "OK"
 }
 
+test_batched_request_firmware_into_buf()
+{
+	echo -n "Batched request_firmware_into_buf() $2 try #$1: "
+	config_reset
+	config_set_name $TEST_FIRMWARE_INTO_BUF_FILENAME
+	config_set_into_buf
+	config_trigger_sync
+	read_firmwares $2
+	release_all_firmware
+	echo "OK"
+}
+
 test_batched_request_firmware_direct()
 {
 	echo -n "Batched request_firmware_direct() $2 try #$1: "
@@ -308,6 +345,10 @@ for i in $(seq 1 5); do
 done
 
 for i in $(seq 1 5); do
+	test_batched_request_firmware_into_buf $i normal
+done
+
+for i in $(seq 1 5); do
 	test_batched_request_firmware_direct $i normal
 done
 
@@ -328,6 +369,10 @@ for i in $(seq 1 5); do
 done
 
 for i in $(seq 1 5); do
+	test_batched_request_firmware_into_buf_nofile $i
+done
+
+for i in $(seq 1 5); do
 	test_batched_request_firmware_direct_nofile $i
 done
 
@@ -351,6 +396,10 @@ for i in $(seq 1 5); do
 done
 
 for i in $(seq 1 5); do
+	test_batched_request_firmware_into_buf $i both
+done
+
+for i in $(seq 1 5); do
 	test_batched_request_firmware_direct $i both
 done
 
@@ -371,6 +420,10 @@ for i in $(seq 1 5); do
 done
 
 for i in $(seq 1 5); do
+	test_batched_request_firmware_into_buf $i xzonly
+done
+
+for i in $(seq 1 5); do
 	test_batched_request_firmware_direct $i xzonly
 done
 
diff --git a/tools/testing/selftests/firmware/fw_lib.sh b/tools/testing/selftests/firmware/fw_lib.sh
index f236cc295450..b879305a766d 100755
--- a/tools/testing/selftests/firmware/fw_lib.sh
+++ b/tools/testing/selftests/firmware/fw_lib.sh
@@ -9,6 +9,12 @@ DIR=/sys/devices/virtual/misc/test_firmware
 PROC_CONFIG="/proc/config.gz"
 TEST_DIR=$(dirname $0)
 
+# We need to load a different file to test request_firmware_into_buf
+# I believe the issue is firmware loaded cached vs. non-cached
+# with same filename is bungled.
+# To reproduce rename this to test-firmware.bin
+TEST_FIRMWARE_INTO_BUF_FILENAME=test-firmware-into-buf.bin
+
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
 
@@ -108,6 +114,8 @@ setup_tmp_file()
 	FWPATH=$(mktemp -d)
 	FW="$FWPATH/test-firmware.bin"
 	echo "ABCD0123" >"$FW"
+	FW_INTO_BUF="$FWPATH/$TEST_FIRMWARE_INTO_BUF_FILENAME"
+	echo "EFGH4567" >"$FW_INTO_BUF"
 	NAME=$(basename "$FW")
 	if [ "$TEST_REQS_FW_SET_CUSTOM_PATH" = "yes" ]; then
 		echo -n "$FWPATH" >/sys/module/firmware_class/parameters/path
@@ -175,6 +183,9 @@ test_finish()
 	if [ -f $FW ]; then
 		rm -f "$FW"
 	fi
+	if [ -f $FW_INTO_BUF ]; then
+		rm -f "$FW_INTO_BUF"
+	fi
 	if [ -d $FWPATH ]; then
 		rm -rf "$FWPATH"
 	fi