Merge tag 'usb-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v4.5

A ton of improvements to dwc2 have been made. The
driver should be a lot more stable on v4.5 then ever
before.

Our good old dwc3 got a few cleanups and misc fixes
and also added support to Xilinx's integration of
this IP.

Yoshihiro Shimoda gives us support for a new USB3
peripheral controller from Renesas.

Other than these, the usual misc fixes all over the
place.

6 files changed, 46 insertions, 62 deletions

diff --git a/include/linux/platform_data/usb-rcar-phy.h b/include/linux/platform_data/usb-rcar-phy.h
deleted file mode 100644
index 8ec6964a32a5..000000000000
--- a/include/linux/platform_data/usb-rcar-phy.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __USB_RCAR_PHY_H
-#define __USB_RCAR_PHY_H
-
-#include <linux/types.h>
-
-struct rcar_phy_platform_data {
-	bool ferrite_bead:1;	/* (R8A7778 only)			*/
-
-	bool port1_func:1;	/* true: port 1 used by function, false: host */
-	unsigned penc1:1;	/* Output of the PENC1 pin in function mode */
-	struct {		/* Overcurrent pin control for ports 0..2 */
-		bool select_3_3v:1; /* true: USB_OVCn pin, false: OVCn pin */
-				/* Set to false on port 1 in function mode */
-		bool active_high:1; /* true: active  high, false: active low */
-				/* Set to true  on port 1 in function mode */
-	} ovc_pin[3];		/* (R8A7778 only has 2 ports)		*/
-};
-
-#endif /* __USB_RCAR_PHY_H */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 3d583a10b926..d82d0068872b 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -402,6 +402,9 @@ static inline void usb_ep_free_request(struct usb_ep *ep,
 static inline int usb_ep_queue(struct usb_ep *ep,
 			       struct usb_request *req, gfp_t gfp_flags)
 {
+	if (WARN_ON_ONCE(!ep->enabled && ep->address))
+		return -ESHUTDOWN;
+
 	return ep->ops->queue(ep, req, gfp_flags);
 }
 
@@ -1012,6 +1015,9 @@ static inline int usb_gadget_activate(struct usb_gadget *gadget)
  * @reset: Invoked on USB bus reset. It is mandatory for all gadget drivers
  *	and should be called in_interrupt.
  * @driver: Driver model state for this driver.
+ * @udc_name: A name of UDC this driver should be bound to. If udc_name is NULL,
+ *	this driver will be bound to any available UDC.
+ * @pending: UDC core private data used for deferred probe of this driver.
  *
  * Devices are disabled till a gadget driver successfully bind()s, which
  * means the driver will handle setup() requests needed to enumerate (and
@@ -1072,6 +1078,9 @@ struct usb_gadget_driver {
 
 	/* FIXME support safe rmmod */
 	struct device_driver	driver;
+
+	char			*udc_name;
+	struct list_head	pending;
 };
 
 
@@ -1117,8 +1126,6 @@ extern int usb_add_gadget_udc_release(struct device *parent,
 		struct usb_gadget *gadget, void (*release)(struct device *dev));
 extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget);
 extern void usb_del_gadget_udc(struct usb_gadget *gadget);
-extern int usb_udc_attach_driver(const char *name,
-		struct usb_gadget_driver *driver);
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/include/linux/usb/musb-omap.h b/include/linux/usb/musb-omap.h
deleted file mode 100644
index 7774c5986f07..000000000000
--- a/include/linux/usb/musb-omap.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2011-2012 by Texas Instruments
- *
- * The Inventra Controller Driver for Linux is free software; you
- * can redistribute it and/or modify it under the terms of the GNU
- * General Public License version 2 as published by the Free Software
- * Foundation.
- */
-
-#ifndef __MUSB_OMAP_H__
-#define __MUSB_OMAP_H__
-
-enum omap_musb_vbus_id_status {
-	OMAP_MUSB_UNKNOWN = 0,
-	OMAP_MUSB_ID_GROUND,
-	OMAP_MUSB_ID_FLOAT,
-	OMAP_MUSB_VBUS_VALID,
-	OMAP_MUSB_VBUS_OFF,
-};
-
-#if (defined(CONFIG_USB_MUSB_OMAP2PLUS) || \
-				defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE))
-void omap_musb_mailbox(enum omap_musb_vbus_id_status status);
-#else
-static inline void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
-{
-}
-#endif
-
-#endif	/* __MUSB_OMAP_H__ */
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index fa6dc132bd1b..96ddfb7ab018 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -133,6 +133,21 @@ struct musb_hdrc_platform_data {
 	const void	*platform_ops;
 };
 
+enum musb_vbus_id_status {
+	MUSB_UNKNOWN = 0,
+	MUSB_ID_GROUND,
+	MUSB_ID_FLOAT,
+	MUSB_VBUS_VALID,
+	MUSB_VBUS_OFF,
+};
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+void musb_mailbox(enum musb_vbus_id_status status);
+#else
+static inline void musb_mailbox(enum musb_vbus_id_status status)
+{
+}
+#endif
 
 /* TUSB 6010 support */
 
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
index c3fe9e48ce27..974bce93aa28 100644
--- a/include/linux/usb/of.h
+++ b/include/linux/usb/of.h
@@ -12,10 +12,16 @@
 #include <linux/usb/phy.h>
 
 #if IS_ENABLED(CONFIG_OF)
+enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np);
 bool of_usb_host_tpl_support(struct device_node *np);
 int of_usb_update_otg_caps(struct device_node *np,
 			struct usb_otg_caps *otg_caps);
 #else
+static inline enum usb_dr_mode
+of_usb_get_dr_mode_by_phy(struct device_node *phy_np)
+{
+	return USB_DR_MODE_UNKNOWN;
+}
 static inline bool of_usb_host_tpl_support(struct device_node *np)
 {
 	return false;
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index bfb74723f151..4db191fe8c2c 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -105,12 +105,26 @@ struct renesas_usbhs_platform_callback {
  * some register needs USB chip specific parameters.
  * This struct show it to driver
  */
+
+struct renesas_usbhs_driver_pipe_config {
+	u8 type;	/* USB_ENDPOINT_XFER_xxx */
+	u16 bufsize;
+	u8 bufnum;
+	bool double_buf;
+};
+#define RENESAS_USBHS_PIPE(_type, _size, _num, _double_buf)	{	\
+			.type = (_type),		\
+			.bufsize = (_size),		\
+			.bufnum = (_num),		\
+			.double_buf = (_double_buf),	\
+	}
+
 struct renesas_usbhs_driver_param {
 	/*
 	 * pipe settings
 	 */
-	u32 *pipe_type; /* array of USB_ENDPOINT_XFER_xxx (from ep0) */
-	int pipe_size; /* pipe_type array size */
+	struct renesas_usbhs_driver_pipe_config *pipe_configs;
+	int pipe_size; /* pipe_configs array size */
 
 	/*
 	 * option: