Merge tag 'drm-misc-next-2021-04-01' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.13:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
  - mst: Improve topology logging
  - edid: Rework and improvements for displayid

Driver Changes:
  - anx7625: Regulators support
  - bridge: Support for the Chipone ICN6211, Lontium LT8912B
  - lt9611: Fix 4k panels handling

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401110552.2b3yetlgsjtlotcn@gilmour

9 files changed, 388 insertions, 23 deletions

diff --git a/include/drm/drm_displayid.h b/include/drm/drm_displayid.h
index 77941efb5426..ec64d141f578 100644
--- a/include/drm/drm_displayid.h
+++ b/include/drm/drm_displayid.h
@@ -22,6 +22,10 @@
 #ifndef DRM_DISPLAYID_H
 #define DRM_DISPLAYID_H
 
+#include <linux/types.h>
+
+struct edid;
+
 #define DATA_BLOCK_PRODUCT_ID 0x00
 #define DATA_BLOCK_DISPLAY_PARAMETERS 0x01
 #define DATA_BLOCK_COLOR_CHARACTERISTICS 0x02
@@ -52,7 +56,7 @@
 #define PRODUCT_TYPE_REPEATER 5
 #define PRODUCT_TYPE_DIRECT_DRIVE 6
 
-struct displayid_hdr {
+struct displayid_header {
 	u8 rev;
 	u8 bytes;
 	u8 prod_id;
@@ -92,12 +96,22 @@ struct displayid_detailed_timing_block {
 	struct displayid_detailed_timings_1 timings[];
 };
 
-#define for_each_displayid_db(displayid, block, idx, length) \
-	for ((block) = (struct displayid_block *)&(displayid)[idx]; \
-	     (idx) + sizeof(struct displayid_block) <= (length) && \
-	     (idx) + sizeof(struct displayid_block) + (block)->num_bytes <= (length) && \
-	     (block)->num_bytes > 0; \
-	     (idx) += sizeof(struct displayid_block) + (block)->num_bytes, \
-	     (block) = (struct displayid_block *)&(displayid)[idx])
+/* DisplayID iteration */
+struct displayid_iter {
+	const struct edid *edid;
+
+	const u8 *section;
+	int length;
+	int idx;
+	int ext_index;
+};
+
+void displayid_iter_edid_begin(const struct edid *edid,
+			       struct displayid_iter *iter);
+const struct displayid_block *
+__displayid_iter_next(struct displayid_iter *iter);
+#define displayid_iter_for_each(__block, __iter) \
+	while (((__block) = __displayid_iter_next(__iter)))
+void displayid_iter_end(struct displayid_iter *iter);
 
 #endif
diff --git a/include/drm/drm_drv.h b/include/drm/drm_drv.h
index 827838e0a97e..b439ae1921b8 100644
--- a/include/drm/drm_drv.h
+++ b/include/drm/drm_drv.h
@@ -74,7 +74,7 @@ enum drm_driver_feature {
 	 * @DRIVER_ATOMIC:
 	 *
 	 * Driver supports the full atomic modesetting userspace API. Drivers
-	 * which only use atomic internally, but do not the support the full
+	 * which only use atomic internally, but do not support the full
 	 * userspace API (e.g. not all properties converted to atomic, or
 	 * multi-plane updates are not guaranteed to be tear-free) should not
 	 * set this flag.
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index a158f585f658..759328a5eeb2 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -543,5 +543,8 @@ struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
 struct drm_display_mode *
 drm_display_mode_from_cea_vic(struct drm_device *dev,
 			      u8 video_code);
+const u8 *drm_find_edid_extension(const struct edid *edid,
+				  int ext_id, int *ext_index);
+
 
 #endif /* __DRM_EDID_H__ */
diff --git a/include/drm/drm_encoder.h b/include/drm/drm_encoder.h
index 5bf78b5bcb2b..6e91a0280f31 100644
--- a/include/drm/drm_encoder.h
+++ b/include/drm/drm_encoder.h
@@ -225,6 +225,24 @@ void *__drmm_encoder_alloc(struct drm_device *dev,
 				      encoder_type, name, ##__VA_ARGS__))
 
 /**
+ * drmm_plain_encoder_alloc - Allocate and initialize an encoder
+ * @dev: drm device
+ * @funcs: callbacks for this encoder (optional)
+ * @encoder_type: user visible type of the encoder
+ * @name: printf style format string for the encoder name, or NULL for default name
+ *
+ * This is a simplified version of drmm_encoder_alloc(), which only allocates
+ * and returns a struct drm_encoder instance, with no subclassing.
+ *
+ * Returns:
+ * Pointer to the new drm_encoder struct, or ERR_PTR on failure.
+ */
+#define drmm_plain_encoder_alloc(dev, funcs, encoder_type, name, ...) \
+	((struct drm_encoder *) \
+	 __drmm_encoder_alloc(dev, sizeof(struct drm_encoder), \
+			      0, funcs, encoder_type, name, ##__VA_ARGS__))
+
+/**
  * drm_encoder_index - find the index of a registered encoder
  * @encoder: encoder to find index for
  *
diff --git a/include/drm/gud.h b/include/drm/gud.h
new file mode 100644
index 000000000000..0b46b54fe56e
--- /dev/null
+++ b/include/drm/gud.h
@@ -0,0 +1,333 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright 2020 Noralf Trønnes
+ */
+
+#ifndef __LINUX_GUD_H
+#define __LINUX_GUD_H
+
+#include <linux/types.h>
+
+/*
+ * struct gud_display_descriptor_req - Display descriptor
+ * @magic: Magic value GUD_DISPLAY_MAGIC
+ * @version: Protocol version
+ * @flags: Flags
+ *         - STATUS_ON_SET: Always do a status request after a SET request.
+ *                          This is used by the Linux gadget driver since it has
+ *                          no way to control the status stage of a control OUT
+ *                          request that has a payload.
+ *         - FULL_UPDATE:   Always send the entire framebuffer when flushing changes.
+ *                          The GUD_REQ_SET_BUFFER request will not be sent
+ *                          before each bulk transfer, it will only be sent if the
+ *                          previous bulk transfer had failed. This gives the device
+ *                          a chance to reset its state machine if needed.
+ *                          This flag can not be used in combination with compression.
+ * @compression: Supported compression types
+ *               - GUD_COMPRESSION_LZ4: LZ4 lossless compression.
+ * @max_buffer_size: Maximum buffer size the device can handle (optional).
+ *                   This is useful for devices that don't have a big enough
+ *                   buffer to decompress the entire framebuffer in one go.
+ * @min_width: Minimum pixel width the controller can handle
+ * @max_width: Maximum width
+ * @min_height: Minimum height
+ * @max_height: Maximum height
+ *
+ * Devices that have only one display mode will have min_width == max_width
+ * and min_height == max_height.
+ */
+struct gud_display_descriptor_req {
+	__le32 magic;
+#define GUD_DISPLAY_MAGIC			0x1d50614d
+	__u8 version;
+	__le32 flags;
+#define GUD_DISPLAY_FLAG_STATUS_ON_SET		BIT(0)
+#define GUD_DISPLAY_FLAG_FULL_UPDATE		BIT(1)
+	__u8 compression;
+#define GUD_COMPRESSION_LZ4			BIT(0)
+	__le32 max_buffer_size;
+	__le32 min_width;
+	__le32 max_width;
+	__le32 min_height;
+	__le32 max_height;
+} __packed;
+
+/*
+ * struct gud_property_req - Property
+ * @prop: Property
+ * @val: Value
+ */
+struct gud_property_req {
+	__le16 prop;
+	__le64 val;
+} __packed;
+
+/*
+ * struct gud_display_mode_req - Display mode
+ * @clock: Pixel clock in kHz
+ * @hdisplay: Horizontal display size
+ * @hsync_start: Horizontal sync start
+ * @hsync_end: Horizontal sync end
+ * @htotal: Horizontal total size
+ * @vdisplay: Vertical display size
+ * @vsync_start: Vertical sync start
+ * @vsync_end: Vertical sync end
+ * @vtotal: Vertical total size
+ * @flags: Bits 0-13 are the same as in the RandR protocol and also what DRM uses.
+ *         The deprecated bits are reused for internal protocol flags leaving us
+ *         free to follow DRM for the other bits in the future.
+ *         - FLAG_PREFERRED: Set on the preferred display mode.
+ */
+struct gud_display_mode_req {
+	__le32 clock;
+	__le16 hdisplay;
+	__le16 hsync_start;
+	__le16 hsync_end;
+	__le16 htotal;
+	__le16 vdisplay;
+	__le16 vsync_start;
+	__le16 vsync_end;
+	__le16 vtotal;
+	__le32 flags;
+#define GUD_DISPLAY_MODE_FLAG_PHSYNC		BIT(0)
+#define GUD_DISPLAY_MODE_FLAG_NHSYNC		BIT(1)
+#define GUD_DISPLAY_MODE_FLAG_PVSYNC		BIT(2)
+#define GUD_DISPLAY_MODE_FLAG_NVSYNC		BIT(3)
+#define GUD_DISPLAY_MODE_FLAG_INTERLACE		BIT(4)
+#define GUD_DISPLAY_MODE_FLAG_DBLSCAN		BIT(5)
+#define GUD_DISPLAY_MODE_FLAG_CSYNC		BIT(6)
+#define GUD_DISPLAY_MODE_FLAG_PCSYNC		BIT(7)
+#define GUD_DISPLAY_MODE_FLAG_NCSYNC		BIT(8)
+#define GUD_DISPLAY_MODE_FLAG_HSKEW		BIT(9)
+/* BCast and PixelMultiplex are deprecated */
+#define GUD_DISPLAY_MODE_FLAG_DBLCLK		BIT(12)
+#define GUD_DISPLAY_MODE_FLAG_CLKDIV2		BIT(13)
+#define GUD_DISPLAY_MODE_FLAG_USER_MASK		\
+		(GUD_DISPLAY_MODE_FLAG_PHSYNC | GUD_DISPLAY_MODE_FLAG_NHSYNC | \
+		GUD_DISPLAY_MODE_FLAG_PVSYNC | GUD_DISPLAY_MODE_FLAG_NVSYNC | \
+		GUD_DISPLAY_MODE_FLAG_INTERLACE | GUD_DISPLAY_MODE_FLAG_DBLSCAN | \
+		GUD_DISPLAY_MODE_FLAG_CSYNC | GUD_DISPLAY_MODE_FLAG_PCSYNC | \
+		GUD_DISPLAY_MODE_FLAG_NCSYNC | GUD_DISPLAY_MODE_FLAG_HSKEW | \
+		GUD_DISPLAY_MODE_FLAG_DBLCLK | GUD_DISPLAY_MODE_FLAG_CLKDIV2)
+/* Internal protocol flags */
+#define GUD_DISPLAY_MODE_FLAG_PREFERRED		BIT(10)
+} __packed;
+
+/*
+ * struct gud_connector_descriptor_req - Connector descriptor
+ * @connector_type: Connector type (GUD_CONNECTOR_TYPE_*).
+ *                  If the host doesn't support the type it should fall back to PANEL.
+ * @flags: Flags
+ *         - POLL_STATUS: Connector status can change (polled every 10 seconds)
+ *         - INTERLACE: Interlaced modes are supported
+ *         - DOUBLESCAN: Doublescan modes are supported
+ */
+struct gud_connector_descriptor_req {
+	__u8 connector_type;
+#define GUD_CONNECTOR_TYPE_PANEL		0
+#define GUD_CONNECTOR_TYPE_VGA			1
+#define GUD_CONNECTOR_TYPE_COMPOSITE		2
+#define GUD_CONNECTOR_TYPE_SVIDEO		3
+#define GUD_CONNECTOR_TYPE_COMPONENT		4
+#define GUD_CONNECTOR_TYPE_DVI			5
+#define GUD_CONNECTOR_TYPE_DISPLAYPORT		6
+#define GUD_CONNECTOR_TYPE_HDMI			7
+	__le32 flags;
+#define GUD_CONNECTOR_FLAGS_POLL_STATUS		BIT(0)
+#define GUD_CONNECTOR_FLAGS_INTERLACE		BIT(1)
+#define GUD_CONNECTOR_FLAGS_DOUBLESCAN		BIT(2)
+} __packed;
+
+/*
+ * struct gud_set_buffer_req - Set buffer transfer info
+ * @x: X position of rectangle
+ * @y: Y position
+ * @width: Pixel width of rectangle
+ * @height: Pixel height
+ * @length: Buffer length in bytes
+ * @compression: Transfer compression
+ * @compressed_length: Compressed buffer length
+ *
+ * This request is issued right before the bulk transfer.
+ * @x, @y, @width and @height specifies the rectangle where the buffer should be
+ * placed inside the framebuffer.
+ */
+struct gud_set_buffer_req {
+	__le32 x;
+	__le32 y;
+	__le32 width;
+	__le32 height;
+	__le32 length;
+	__u8 compression;
+	__le32 compressed_length;
+} __packed;
+
+/*
+ * struct gud_state_req - Display state
+ * @mode: Display mode
+ * @format: Pixel format GUD_PIXEL_FORMAT_*
+ * @connector: Connector index
+ * @properties: Array of properties
+ *
+ * The entire state is transferred each time there's a change.
+ */
+struct gud_state_req {
+	struct gud_display_mode_req mode;
+	__u8 format;
+	__u8 connector;
+	struct gud_property_req properties[];
+} __packed;
+
+/* List of supported connector properties: */
+
+/* Margins in pixels to deal with overscan, range 0-100 */
+#define GUD_PROPERTY_TV_LEFT_MARGIN			1
+#define GUD_PROPERTY_TV_RIGHT_MARGIN			2
+#define GUD_PROPERTY_TV_TOP_MARGIN			3
+#define GUD_PROPERTY_TV_BOTTOM_MARGIN			4
+#define GUD_PROPERTY_TV_MODE				5
+/* Brightness in percent, range 0-100 */
+#define GUD_PROPERTY_TV_BRIGHTNESS			6
+/* Contrast in percent, range 0-100 */
+#define GUD_PROPERTY_TV_CONTRAST			7
+/* Flicker reduction in percent, range 0-100 */
+#define GUD_PROPERTY_TV_FLICKER_REDUCTION		8
+/* Overscan in percent, range 0-100 */
+#define GUD_PROPERTY_TV_OVERSCAN			9
+/* Saturation in percent, range 0-100 */
+#define GUD_PROPERTY_TV_SATURATION			10
+/* Hue in percent, range 0-100 */
+#define GUD_PROPERTY_TV_HUE				11
+
+/*
+ * Backlight brightness is in the range 0-100 inclusive. The value represents the human perceptual
+ * brightness and not a linear PWM value. 0 is minimum brightness which should not turn the
+ * backlight completely off. The DPMS connector property should be used to control power which will
+ * trigger a GUD_REQ_SET_DISPLAY_ENABLE request.
+ *
+ * This does not map to a DRM property, it is used with the backlight device.
+ */
+#define GUD_PROPERTY_BACKLIGHT_BRIGHTNESS		12
+
+/* List of supported properties that are not connector propeties: */
+
+/*
+ * Plane rotation. Should return the supported bitmask on
+ * GUD_REQ_GET_PROPERTIES. GUD_ROTATION_0 is mandatory.
+ *
+ * Note: This is not display rotation so 90/270 will need scaling to make it fit (unless squared).
+ */
+#define GUD_PROPERTY_ROTATION				50
+  #define GUD_ROTATION_0			BIT(0)
+  #define GUD_ROTATION_90			BIT(1)
+  #define GUD_ROTATION_180			BIT(2)
+  #define GUD_ROTATION_270			BIT(3)
+  #define GUD_ROTATION_REFLECT_X		BIT(4)
+  #define GUD_ROTATION_REFLECT_Y		BIT(5)
+  #define GUD_ROTATION_MASK			(GUD_ROTATION_0 | GUD_ROTATION_90 | \
+						GUD_ROTATION_180 | GUD_ROTATION_270 | \
+						GUD_ROTATION_REFLECT_X | GUD_ROTATION_REFLECT_Y)
+
+/* USB Control requests: */
+
+/* Get status from the last GET/SET control request. Value is u8. */
+#define GUD_REQ_GET_STATUS				0x00
+  /* Status values: */
+  #define GUD_STATUS_OK				0x00
+  #define GUD_STATUS_BUSY			0x01
+  #define GUD_STATUS_REQUEST_NOT_SUPPORTED	0x02
+  #define GUD_STATUS_PROTOCOL_ERROR		0x03
+  #define GUD_STATUS_INVALID_PARAMETER		0x04
+  #define GUD_STATUS_ERROR			0x05
+
+/* Get display descriptor as a &gud_display_descriptor_req */
+#define GUD_REQ_GET_DESCRIPTOR				0x01
+
+/* Get supported pixel formats as a byte array of GUD_PIXEL_FORMAT_* */
+#define GUD_REQ_GET_FORMATS				0x40
+  #define GUD_FORMATS_MAX_NUM			32
+  /* R1 is a 1-bit monochrome transfer format presented to userspace as XRGB8888 */
+  #define GUD_PIXEL_FORMAT_R1			0x01
+  #define GUD_PIXEL_FORMAT_XRGB1111		0x20
+  #define GUD_PIXEL_FORMAT_RGB565		0x40
+  #define GUD_PIXEL_FORMAT_XRGB8888		0x80
+  #define GUD_PIXEL_FORMAT_ARGB8888		0x81
+
+/*
+ * Get supported properties that are not connector propeties as a &gud_property_req array.
+ * gud_property_req.val often contains the initial value for the property.
+ */
+#define GUD_REQ_GET_PROPERTIES				0x41
+  #define GUD_PROPERTIES_MAX_NUM		32
+
+/* Connector requests have the connector index passed in the wValue field */
+
+/* Get connector descriptors as an array of &gud_connector_descriptor_req */
+#define GUD_REQ_GET_CONNECTORS				0x50
+  #define GUD_CONNECTORS_MAX_NUM		32
+
+/*
+ * Get properties supported by the connector as a &gud_property_req array.
+ * gud_property_req.val often contains the initial value for the property.
+ */
+#define GUD_REQ_GET_CONNECTOR_PROPERTIES		0x51
+  #define GUD_CONNECTOR_PROPERTIES_MAX_NUM	32
+
+/*
+ * Issued when there's a TV_MODE property present.
+ * Gets an array of the supported TV_MODE names each entry of length
+ * GUD_CONNECTOR_TV_MODE_NAME_LEN. Names must be NUL-terminated.
+ */
+#define GUD_REQ_GET_CONNECTOR_TV_MODE_VALUES		0x52
+  #define GUD_CONNECTOR_TV_MODE_NAME_LEN	16
+  #define GUD_CONNECTOR_TV_MODE_MAX_NUM		16
+
+/* When userspace checks connector status, this is issued first, not used for poll requests. */
+#define GUD_REQ_SET_CONNECTOR_FORCE_DETECT		0x53
+
+/*
+ * Get connector status. Value is u8.
+ *
+ * Userspace will get a HOTPLUG uevent if one of the following is true:
+ * - Connection status has changed since last
+ * - CHANGED is set
+ */
+#define GUD_REQ_GET_CONNECTOR_STATUS			0x54
+  #define GUD_CONNECTOR_STATUS_DISCONNECTED	0x00
+  #define GUD_CONNECTOR_STATUS_CONNECTED	0x01
+  #define GUD_CONNECTOR_STATUS_UNKNOWN		0x02
+  #define GUD_CONNECTOR_STATUS_CONNECTED_MASK	0x03
+  #define GUD_CONNECTOR_STATUS_CHANGED		BIT(7)
+
+/*
+ * Display modes can be fetched as either EDID data or an array of &gud_display_mode_req.
+ *
+ * If GUD_REQ_GET_CONNECTOR_MODES returns zero, EDID is used to create display modes.
+ * If both display modes and EDID are returned, EDID is just passed on to userspace
+ * in the EDID connector property.
+ */
+
+/* Get &gud_display_mode_req array of supported display modes */
+#define GUD_REQ_GET_CONNECTOR_MODES			0x55
+  #define GUD_CONNECTOR_MAX_NUM_MODES		128
+
+/* Get Extended Display Identification Data */
+#define GUD_REQ_GET_CONNECTOR_EDID			0x56
+  #define GUD_CONNECTOR_MAX_EDID_LEN		2048
+
+/* Set buffer properties before bulk transfer as &gud_set_buffer_req */
+#define GUD_REQ_SET_BUFFER				0x60
+
+/* Check display configuration as &gud_state_req */
+#define GUD_REQ_SET_STATE_CHECK				0x61
+
+/* Apply the previous STATE_CHECK configuration */
+#define GUD_REQ_SET_STATE_COMMIT			0x62
+
+/* Enable/disable the display controller, value is u8: 0/1 */
+#define GUD_REQ_SET_CONTROLLER_ENABLE			0x63
+
+/* Enable/disable display/output (DPMS), value is u8: 0/1 */
+#define GUD_REQ_SET_DISPLAY_ENABLE			0x64
+
+#endif
diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h
index 4fb523dfab32..3587f660e8f4 100644
--- a/include/drm/ttm/ttm_bo_api.h
+++ b/include/drm/ttm/ttm_bo_api.h
@@ -144,7 +144,6 @@ struct ttm_buffer_object {
 
 	struct list_head lru;
 	struct list_head ddestroy;
-	struct list_head swap;
 
 	/**
 	 * Members protected by a bo reservation.
@@ -560,7 +559,8 @@ ssize_t ttm_bo_io(struct ttm_device *bdev, struct file *filp,
 		  const char __user *wbuf, char __user *rbuf,
 		  size_t count, loff_t *f_pos, bool write);
 
-int ttm_bo_swapout(struct ttm_operation_ctx *ctx, gfp_t gfp_flags);
+int ttm_bo_swapout(struct ttm_buffer_object *bo, struct ttm_operation_ctx *ctx,
+		   gfp_t gfp_flags);
 
 /**
  * ttm_bo_uses_embedded_gem_object - check if the given bo uses the
diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h
index 8959c0075cfd..dbccac957f8f 100644
--- a/include/drm/ttm/ttm_bo_driver.h
+++ b/include/drm/ttm/ttm_bo_driver.h
@@ -69,7 +69,6 @@ struct ttm_lru_bulk_move_pos {
 struct ttm_lru_bulk_move {
 	struct ttm_lru_bulk_move_pos tt[TTM_MAX_BO_PRIORITY];
 	struct ttm_lru_bulk_move_pos vram[TTM_MAX_BO_PRIORITY];
-	struct ttm_lru_bulk_move_pos swap[TTM_MAX_BO_PRIORITY];
 };
 
 /*
@@ -181,9 +180,9 @@ static inline int ttm_bo_reserve_slowpath(struct ttm_buffer_object *bo,
 static inline void
 ttm_bo_move_to_lru_tail_unlocked(struct ttm_buffer_object *bo)
 {
-	spin_lock(&ttm_glob.lru_lock);
+	spin_lock(&bo->bdev->lru_lock);
 	ttm_bo_move_to_lru_tail(bo, &bo->mem, NULL);
-	spin_unlock(&ttm_glob.lru_lock);
+	spin_unlock(&bo->bdev->lru_lock);
 }
 
 static inline void ttm_bo_assign_mem(struct ttm_buffer_object *bo,
diff --git a/include/drm/ttm/ttm_device.h b/include/drm/ttm/ttm_device.h
index 035bbc044a3b..7c8f87bd52d3 100644
--- a/include/drm/ttm/ttm_device.h
+++ b/include/drm/ttm/ttm_device.h
@@ -56,7 +56,6 @@ extern struct ttm_global {
 	 */
 
 	struct page *dummy_read_page;
-	spinlock_t lru_lock;
 
 	/**
 	 * Protected by ttm_global_mutex.
@@ -64,11 +63,6 @@ extern struct ttm_global {
 	struct list_head device_list;
 
 	/**
-	 * Protected by the lru_lock.
-	 */
-	struct list_head swap_lru[TTM_MAX_BO_PRIORITY];
-
-	/**
 	 * Internal protection.
 	 */
 	atomic_t bo_count;
@@ -282,8 +276,9 @@ struct ttm_device {
 	struct ttm_pool pool;
 
 	/*
-	 * Protected by the global:lru lock.
+	 * Protection for the per manager LRU and ddestroy lists.
 	 */
+	spinlock_t lru_lock;
 	struct list_head ddestroy;
 
 	/*
@@ -297,6 +292,10 @@ struct ttm_device {
 	struct delayed_work wq;
 };
 
+int ttm_global_swapout(struct ttm_operation_ctx *ctx, gfp_t gfp_flags);
+int ttm_device_swapout(struct ttm_device *bdev, struct ttm_operation_ctx *ctx,
+		       gfp_t gfp_flags);
+
 static inline struct ttm_resource_manager *
 ttm_manager_type(struct ttm_device *bdev, int mem_type)
 {
diff --git a/include/drm/ttm/ttm_tt.h b/include/drm/ttm/ttm_tt.h
index 069f8130241a..134d09ef7766 100644
--- a/include/drm/ttm/ttm_tt.h
+++ b/include/drm/ttm/ttm_tt.h
@@ -157,8 +157,7 @@ int ttm_tt_populate(struct ttm_device *bdev, struct ttm_tt *ttm, struct ttm_oper
  */
 void ttm_tt_unpopulate(struct ttm_device *bdev, struct ttm_tt *ttm);
 
-int ttm_tt_mgr_init(void);
-void ttm_tt_mgr_fini(void);
+void ttm_tt_mgr_init(unsigned long num_pages, unsigned long num_dma32_pages);
 
 #if IS_ENABLED(CONFIG_AGP)
 #include <linux/agp_backend.h>