diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-05-06 23:37:55 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-05-06 23:37:55 -0700 |
commit | aef511fb91b6efb2d355c2704cf979f3202d310a (patch) | |
tree | d94df6d5c0c297ade8a45594602006b04e95ad59 /drivers | |
parent | e48661230cc35b3d0f4367eddfc19f86463ab917 (diff) | |
parent | 05665cef4b745cb46b1d1b8e96deaa25464092d3 (diff) |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- three new touchscreen drivers: Hycon HY46XX, ILITEK Lego Series,
and MStar MSG2638
- a new driver for Azoteq IQS626A proximity and touch controller
- addition of Amazon Game Controller to the list of devices handled
by the xpad driver
- Elan touchscreen driver will avoid binding to devices described as
I2CHID compatible in ACPI tables
- various driver fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (56 commits)
Input: xpad - add support for Amazon Game Controller
Input: ili210x - add missing negation for touch indication on ili210x
MAINTAINERS: repair reference in HYCON HY46XX TOUCHSCREEN SUPPORT
Input: add driver for the Hycon HY46XX touchpanel series
dt-bindings: touchscreen: Add HY46XX bindings
dt-bindings: Add Hycon Technology vendor prefix
Input: cyttsp - flag the device properly
Input: cyttsp - set abs params for ABS_MT_TOUCH_MAJOR
Input: cyttsp - drop the phys path
Input: cyttsp - reduce reset pulse timings
Input: cyttsp - error message on boot mode exit error
Input: apbps2 - remove useless variable
Input: mms114 - support MMS136
Input: mms114 - convert bindings to YAML and extend
Input: Add support for ILITEK Lego Series
dt-bindings: input: touchscreen: ilitek_ts_i2c: Add bindings
Input: add MStar MSG2638 touchscreen driver
dt-bindings: input/touchscreen: add bindings for msg2638
Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state
Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devices
...
Diffstat (limited to 'drivers')
39 files changed, 4137 insertions, 413 deletions
diff --git a/drivers/input/Makefile b/drivers/input/Makefile index d8f5310e22ba..037cc595106c 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_INPUT) += input-core.o input-core-y := input.o input-compat.o input-mt.o input-poller.o ff-core.o +input-core-y += touchscreen.o obj-$(CONFIG_INPUT_FF_MEMLESS) += ff-memless.o obj-$(CONFIG_INPUT_SPARSEKMAP) += sparse-keymap.o diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 9f0d07dcbf06..d69d7657ab12 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -268,6 +268,7 @@ static const struct xpad_device { { 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 }, { 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 }, { 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 }, + { 0x1949, 0x041a, "Amazon Game Controller", 0, XTYPE_XBOX360 }, { 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 }, { 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0x0130, "Ion Drum Rocker", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, @@ -440,6 +441,7 @@ static const struct usb_device_id xpad_table[] = { XPAD_XBOX360_VENDOR(0x15e4), /* Numark X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x162e), /* Joytech X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */ + XPAD_XBOX360_VENDOR(0x1949), /* Amazon controllers */ XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */ XPAD_XBOX360_VENDOR(0x20d6), /* PowerA Controllers */ XPAD_XBOXONE_VENDOR(0x20d6), /* PowerA Controllers */ diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 77bac4ddf324..8dbf1e69c90a 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -8,6 +8,7 @@ #include <linux/module.h> +#include <linux/hrtimer.h> #include <linux/init.h> #include <linux/fs.h> #include <linux/interrupt.h> @@ -36,10 +37,11 @@ struct gpio_button_data { unsigned short *code; - struct timer_list release_timer; + struct hrtimer release_timer; unsigned int release_delay; /* in msecs, for IRQ-only buttons */ struct delayed_work work; + struct hrtimer debounce_timer; unsigned int software_debounce; /* in msecs, for GPIO-driven buttons */ unsigned int irq; @@ -48,6 +50,7 @@ struct gpio_button_data { bool disabled; bool key_pressed; bool suspended; + bool debounce_use_hrtimer; }; struct gpio_keys_drvdata { @@ -122,6 +125,18 @@ static const unsigned long *get_bm_events_by_type(struct input_dev *dev, return (type == EV_KEY) ? dev->keybit : dev->swbit; } +static void gpio_keys_quiesce_key(void *data) +{ + struct gpio_button_data *bdata = data; + + if (!bdata->gpiod) + hrtimer_cancel(&bdata->release_timer); + if (bdata->debounce_use_hrtimer) + hrtimer_cancel(&bdata->debounce_timer); + else + cancel_delayed_work_sync(&bdata->work); +} + /** * gpio_keys_disable_button() - disables given GPIO button * @bdata: button data for button to be disabled @@ -142,12 +157,7 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata) * Disable IRQ and associated timer/work structure. */ disable_irq(bdata->irq); - - if (bdata->gpiod) - cancel_delayed_work_sync(&bdata->work); - else - del_timer_sync(&bdata->release_timer); - + gpio_keys_quiesce_key(bdata); bdata->disabled = true; } } @@ -360,7 +370,9 @@ static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata) unsigned int type = button->type ?: EV_KEY; int state; - state = gpiod_get_value_cansleep(bdata->gpiod); + state = bdata->debounce_use_hrtimer ? + gpiod_get_value(bdata->gpiod) : + gpiod_get_value_cansleep(bdata->gpiod); if (state < 0) { dev_err(input->dev.parent, "failed to get gpio state: %d\n", state); @@ -373,7 +385,15 @@ static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata) } else { input_event(input, type, *bdata->code, state); } - input_sync(input); +} + +static void gpio_keys_debounce_event(struct gpio_button_data *bdata) +{ + gpio_keys_gpio_report_event(bdata); + input_sync(bdata->input); + + if (bdata->button->wakeup) + pm_relax(bdata->input->dev.parent); } static void gpio_keys_gpio_work_func(struct work_struct *work) @@ -381,10 +401,17 @@ static void gpio_keys_gpio_work_func(struct work_struct *work) struct gpio_button_data *bdata = container_of(work, struct gpio_button_data, work.work); - gpio_keys_gpio_report_event(bdata); + gpio_keys_debounce_event(bdata); +} - if (bdata->button->wakeup) - pm_relax(bdata->input->dev.parent); +static enum hrtimer_restart gpio_keys_debounce_timer(struct hrtimer *t) +{ + struct gpio_button_data *bdata = + container_of(t, struct gpio_button_data, debounce_timer); + + gpio_keys_debounce_event(bdata); + + return HRTIMER_NORESTART; } static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id) @@ -408,26 +435,33 @@ static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id) } } - mod_delayed_work(system_wq, - &bdata->work, - msecs_to_jiffies(bdata->software_debounce)); + if (bdata->debounce_use_hrtimer) { + hrtimer_start(&bdata->debounce_timer, + ms_to_ktime(bdata->software_debounce), + HRTIMER_MODE_REL); + } else { + mod_delayed_work(system_wq, + &bdata->work, + msecs_to_jiffies(bdata->software_debounce)); + } return IRQ_HANDLED; } -static void gpio_keys_irq_timer(struct timer_list *t) +static enum hrtimer_restart gpio_keys_irq_timer(struct hrtimer *t) { - struct gpio_button_data *bdata = from_timer(bdata, t, release_timer); + struct gpio_button_data *bdata = container_of(t, + struct gpio_button_data, + release_timer); struct input_dev *input = bdata->input; - unsigned long flags; - spin_lock_irqsave(&bdata->lock, flags); if (bdata->key_pressed) { input_event(input, EV_KEY, *bdata->code, 0); input_sync(input); bdata->key_pressed = false; } - spin_unlock_irqrestore(&bdata->lock, flags); + + return HRTIMER_NORESTART; } static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id) @@ -457,23 +491,14 @@ static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id) } if (bdata->release_delay) - mod_timer(&bdata->release_timer, - jiffies + msecs_to_jiffies(bdata->release_delay)); + hrtimer_start(&bdata->release_timer, + ms_to_ktime(bdata->release_delay), + HRTIMER_MODE_REL_HARD); out: spin_unlock_irqrestore(&bdata->lock, flags); return IRQ_HANDLED; } -static void gpio_keys_quiesce_key(void *data) -{ - struct gpio_button_data *bdata = data; - - if (bdata->gpiod) - cancel_delayed_work_sync(&bdata->work); - else - del_timer_sync(&bdata->release_timer); -} - static int gpio_keys_setup_key(struct platform_device *pdev, struct input_dev *input, struct gpio_keys_drvdata *ddata, @@ -543,6 +568,14 @@ static int gpio_keys_setup_key(struct platform_device *pdev, if (error < 0) bdata->software_debounce = button->debounce_interval; + + /* + * If reading the GPIO won't sleep, we can use a + * hrtimer instead of a standard timer for the software + * debounce, to reduce the latency as much as possible. + */ + bdata->debounce_use_hrtimer = + !gpiod_cansleep(bdata->gpiod); } if (button->irq) { @@ -561,6 +594,10 @@ static int gpio_keys_setup_key(struct platform_device *pdev, INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func); + hrtimer_init(&bdata->debounce_timer, + CLOCK_REALTIME, HRTIMER_MODE_REL); + bdata->debounce_timer.function = gpio_keys_debounce_timer; + isr = gpio_keys_gpio_isr; irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING; @@ -595,7 +632,9 @@ static int gpio_keys_setup_key(struct platform_device *pdev, } bdata->release_delay = button->debounce_interval; - timer_setup(&bdata->release_timer, gpio_keys_irq_timer, 0); + hrtimer_init(&bdata->release_timer, + CLOCK_REALTIME, HRTIMER_MODE_REL_HARD); + bdata->release_timer.function = gpio_keys_irq_timer; isr = gpio_keys_irq_isr; irqflags = 0; diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index 1f5c9ea5e9e5..ae9303848571 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -408,27 +408,18 @@ open_err: return -EIO; } -#ifdef CONFIG_OF static const struct of_device_id imx_keypad_of_match[] = { { .compatible = "fsl,imx21-kpp", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, imx_keypad_of_match); -#endif static int imx_keypad_probe(struct platform_device *pdev) { - const struct matrix_keymap_data *keymap_data = - dev_get_platdata(&pdev->dev); struct imx_keypad *keypad; struct input_dev *input_dev; int irq, error, i, row, col; - if (!keymap_data && !pdev->dev.of_node) { - dev_err(&pdev->dev, "no keymap defined\n"); - return -EINVAL; - } - irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; @@ -469,7 +460,7 @@ static int imx_keypad_probe(struct platform_device *pdev) input_dev->open = imx_keypad_open; input_dev->close = imx_keypad_close; - error = matrix_keypad_build_keymap(keymap_data, NULL, + error = matrix_keypad_build_keymap(NULL, NULL, MAX_MATRIX_KEY_ROWS, MAX_MATRIX_KEY_COLS, keypad->keycodes, input_dev); @@ -582,7 +573,7 @@ static struct platform_driver imx_keypad_driver = { .driver = { .name = "imx-keypad", .pm = &imx_kbd_pm_ops, - .of_match_table = of_match_ptr(imx_keypad_of_match), + .of_match_table = imx_keypad_of_match, }, .probe = imx_keypad_probe, }; diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c index 9b0f9665dcb0..2a9755910065 100644 --- a/drivers/input/keyboard/tca6416-keypad.c +++ b/drivers/input/keyboard/tca6416-keypad.c @@ -274,7 +274,7 @@ static int tca6416_keypad_probe(struct i2c_client *client, error = request_threaded_irq(chip->irqnum, NULL, tca6416_keys_isr, IRQF_TRIGGER_FALLING | - IRQF_ONESHOT, + IRQF_ONESHOT | IRQF_NO_AUTOEN, "tca6416-keypad", chip); if (error) { dev_dbg(&client->dev, @@ -282,7 +282,6 @@ static int tca6416_keypad_probe(struct i2c_client *client, chip->irqnum, error); goto fail1; } - disable_irq(chip->irqnum); } error = input_register_device(input); diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index 9671842a082a..570fe18c0ce9 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -694,14 +694,13 @@ static int tegra_kbc_probe(struct platform_device *pdev) input_set_drvdata(kbc->idev, kbc); err = devm_request_irq(&pdev->dev, kbc->irq, tegra_kbc_isr, - IRQF_TRIGGER_HIGH, pdev->name, kbc); + IRQF_TRIGGER_HIGH | IRQF_NO_AUTOEN, + pdev->name, kbc); if (err) { dev_err(&pdev->dev, "failed to request keyboard IRQ\n"); return err; } - disable_irq(kbc->irq); - err = input_register_device(kbc->idev); if (err) { dev_err(&pdev->dev, "failed to register input device\n"); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 7237dc440b98..498cde376981 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -763,6 +763,17 @@ config INPUT_IQS269A To compile this driver as a module, choose M here: the module will be called iqs269a. +config INPUT_IQS626A + tristate "Azoteq IQS626A capacitive touch controller" + depends on I2C + select REGMAP_I2C + help + Say Y to enable support for the Azoteq IQS626A capacitive + touch controller. + + To compile this driver as a module, choose M here: the + module will be called iqs626a. + config INPUT_CMA3000 tristate "VTI CMA3000 Tri-axis accelerometer" help diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 46db664a8bc4..f593beed7e05 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_INPUT_HISI_POWERKEY) += hisi_powerkey.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o obj-$(CONFIG_INPUT_IQS269A) += iqs269a.o +obj-$(CONFIG_INPUT_IQS626A) += iqs626a.o obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c index 08b9b5cdb943..81de8c4e37d0 100644 --- a/drivers/input/misc/ims-pcu.c +++ b/drivers/input/misc/ims-pcu.c @@ -2018,7 +2018,6 @@ static int ims_pcu_probe(struct usb_interface *intf, } usb_set_intfdata(pcu->ctrl_intf, pcu); - usb_set_intfdata(pcu->data_intf, pcu); error = ims_pcu_buffers_alloc(pcu); if (error) diff --git a/drivers/input/misc/iqs626a.c b/drivers/input/misc/iqs626a.c new file mode 100644 index 000000000000..d57e996732cf --- /dev/null +++ b/drivers/input/misc/iqs626a.c @@ -0,0 +1,1838 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Azoteq IQS626A Capacitive Touch Controller + * + * Copyright (C) 2020 Jeff LaBundy <jeff@labundy.com> + * + * This driver registers up to 2 input devices: one representing capacitive or + * inductive keys as well as Hall-effect switches, and one for a trackpad that + * can express various gestures. + */ + +#include <linux/bits.h> +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/touchscreen.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#define IQS626_VER_INFO 0x00 +#define IQS626_VER_INFO_PROD_NUM 0x51 + +#define IQS626_SYS_FLAGS 0x02 +#define IQS626_SYS_FLAGS_SHOW_RESET BIT(15) +#define IQS626_SYS_FLAGS_IN_ATI BIT(12) +#define IQS626_SYS_FLAGS_PWR_MODE_MASK GENMASK(9, 8) +#define IQS626_SYS_FLAGS_PWR_MODE_SHIFT 8 + +#define IQS626_HALL_OUTPUT 0x23 + +#define IQS626_SYS_SETTINGS 0x80 +#define IQS626_SYS_SETTINGS_CLK_DIV BIT(15) +#define IQS626_SYS_SETTINGS_ULP_AUTO BIT(14) +#define IQS626_SYS_SETTINGS_DIS_AUTO BIT(13) +#define IQS626_SYS_SETTINGS_PWR_MODE_MASK GENMASK(12, 11) +#define IQS626_SYS_SETTINGS_PWR_MODE_SHIFT 11 +#define IQS626_SYS_SETTINGS_PWR_MODE_MAX 3 +#define IQS626_SYS_SETTINGS_ULP_UPDATE_MASK GENMASK(10, 8) +#define IQS626_SYS_SETTINGS_ULP_UPDATE_SHIFT 8 +#define IQS626_SYS_SETTINGS_ULP_UPDATE_MAX 7 +#define IQS626_SYS_SETTINGS_EVENT_MODE BIT(5) +#define IQS626_SYS_SETTINGS_EVENT_MODE_LP BIT(4) +#define IQS626_SYS_SETTINGS_REDO_ATI BIT(2) +#define IQS626_SYS_SETTINGS_ACK_RESET BIT(0) + +#define IQS626_MISC_A_ATI_BAND_DISABLE BIT(7) +#define IQS626_MISC_A_TPx_LTA_UPDATE_MASK GENMASK(6, 4) +#define IQS626_MISC_A_TPx_LTA_UPDATE_SHIFT 4 +#define IQS626_MISC_A_TPx_LTA_UPDATE_MAX 7 +#define IQS626_MISC_A_ATI_LP_ONLY BIT(3) +#define IQS626_MISC_A_GPIO3_SELECT_MASK GENMASK(2, 0) +#define IQS626_MISC_A_GPIO3_SELECT_MAX 7 + +#define IQS626_EVENT_MASK_SYS BIT(6) +#define IQS626_EVENT_MASK_GESTURE BIT(3) +#define IQS626_EVENT_MASK_DEEP BIT(2) +#define IQS626_EVENT_MASK_TOUCH BIT(1) +#define IQS626_EVENT_MASK_PROX BIT(0) + +#define IQS626_RATE_NP_MS_MAX 255 +#define IQS626_RATE_LP_MS_MAX 255 +#define IQS626_RATE_ULP_MS_MAX 4080 +#define IQS626_TIMEOUT_PWR_MS_MAX 130560 +#define IQS626_TIMEOUT_LTA_MS_MAX 130560 + +#define IQS626_MISC_B_RESEED_UI_SEL_MASK GENMASK(7, 6) +#define IQS626_MISC_B_RESEED_UI_SEL_SHIFT 6 +#define IQS626_MISC_B_RESEED_UI_SEL_MAX 3 +#define IQS626_MISC_B_THRESH_EXTEND BIT(5) +#define IQS626_MISC_B_TRACKING_UI_ENABLE BIT(4) +#define IQS626_MISC_B_TPx_SWIPE BIT(3) +#define IQS626_MISC_B_RESEED_OFFSET BIT(2) +#define IQS626_MISC_B_FILT_STR_TPx GENMASK(1, 0) + +#define IQS626_THRESH_SWIPE_MAX 255 +#define IQS626_TIMEOUT_TAP_MS_MAX 4080 +#define IQS626_TIMEOUT_SWIPE_MS_MAX 4080 + +#define IQS626_CHx_ENG_0_MEAS_CAP_SIZE BIT(7) +#define IQS626_CHx_ENG_0_RX_TERM_VSS BIT(5) +#define IQS626_CHx_ENG_0_LINEARIZE BIT(4) +#define IQS626_CHx_ENG_0_DUAL_DIR BIT(3) +#define IQS626_CHx_ENG_0_FILT_DISABLE BIT(2) +#define IQS626_CHx_ENG_0_ATI_MODE_MASK GENMASK(1, 0) +#define IQS626_CHx_ENG_0_ATI_MODE_MAX 3 + +#define IQS626_CHx_ENG_1_CCT_HIGH_1 BIT(7) +#define IQS626_CHx_ENG_1_CCT_HIGH_0 BIT(6) +#define IQS626_CHx_ENG_1_PROJ_BIAS_MASK GENMASK(5, 4) +#define IQS626_CHx_ENG_1_PROJ_BIAS_SHIFT 4 +#define IQS626_CHx_ENG_1_PROJ_BIAS_MAX 3 +#define IQS626_CHx_ENG_1_CCT_ENABLE BIT(3) +#define IQS626_CHx_ENG_1_SENSE_FREQ_MASK GENMASK(2, 1) +#define IQS626_CHx_ENG_1_SENSE_FREQ_SHIFT 1 +#define IQS626_CHx_ENG_1_SENSE_FREQ_MAX 3 +#define IQS626_CHx_ENG_1_ATI_BAND_TIGHTEN BIT(0) + +#define IQS626_CHx_ENG_2_LOCAL_CAP_MASK GENMASK(7, 6) +#define IQS626_CHx_ENG_2_LOCAL_CAP_SHIFT 6 +#define IQS626_CHx_ENG_2_LOCAL_CAP_MAX 3 +#define IQS626_CHx_ENG_2_LOCAL_CAP_ENABLE BIT(5) +#define IQS626_CHx_ENG_2_SENSE_MODE_MASK GENMASK(3, 0) +#define IQS626_CHx_ENG_2_SENSE_MODE_MAX 15 + +#define IQS626_CHx_ENG_3_TX_FREQ_MASK GENMASK(5, 4) +#define IQS626_CHx_ENG_3_TX_FREQ_SHIFT 4 +#define IQS626_CHx_ENG_3_TX_FREQ_MAX 3 +#define IQS626_CHx_ENG_3_INV_LOGIC BIT(0) + +#define IQS626_CHx_ENG_4_RX_TERM_VREG BIT(6) +#define IQS626_CHx_ENG_4_CCT_LOW_1 BIT(5) +#define IQS626_CHx_ENG_4_CCT_LOW_0 BIT(4) +#define IQS626_CHx_ENG_4_COMP_DISABLE BIT(1) +#define IQS626_CHx_ENG_4_STATIC_ENABLE BIT(0) + +#define IQS626_TPx_ATI_BASE_MIN 45 +#define IQS626_TPx_ATI_BASE_MAX 300 +#define IQS626_CHx_ATI_BASE_MASK GENMASK(7, 6) +#define IQS626_CHx_ATI_BASE_75 0x00 +#define IQS626_CHx_ATI_BASE_100 0x40 +#define IQS626_CHx_ATI_BASE_150 0x80 +#define IQS626_CHx_ATI_BASE_200 0xC0 +#define IQS626_CHx_ATI_TARGET_MASK GENMASK(5, 0) +#define IQS626_CHx_ATI_TARGET_MAX 2016 + +#define IQS626_CHx_THRESH_MAX 255 +#define IQS626_CHx_HYST_DEEP_MASK GENMASK(7, 4) +#define IQS626_CHx_HYST_DEEP_SHIFT 4 +#define IQS626_CHx_HYST_TOUCH_MASK GENMASK(3, 0) +#define IQS626_CHx_HYST_MAX 15 + +#define IQS626_FILT_STR_NP_TPx_MASK GENMASK(7, 6) +#define IQS626_FILT_STR_NP_TPx_SHIFT 6 +#define IQS626_FILT_STR_LP_TPx_MASK GENMASK(5, 4) +#define IQS626_FILT_STR_LP_TPx_SHIFT 4 + +#define IQS626_FILT_STR_NP_CNT_MASK GENMASK(7, 6) +#define IQS626_FILT_STR_NP_CNT_SHIFT 6 +#define IQS626_FILT_STR_LP_CNT_MASK GENMASK(5, 4) +#define IQS626_FILT_STR_LP_CNT_SHIFT 4 +#define IQS626_FILT_STR_NP_LTA_MASK GENMASK(3, 2) +#define IQS626_FILT_STR_NP_LTA_SHIFT 2 +#define IQS626_FILT_STR_LP_LTA_MASK GENMASK(1, 0) +#define IQS626_FILT_STR_MAX 3 + +#define IQS626_ULP_PROJ_ENABLE BIT(4) +#define IQS626_GEN_WEIGHT_MAX 255 + +#define IQS626_MAX_REG 0xFF + +#define IQS626_NUM_CH_TP_3 9 +#define IQS626_NUM_CH_TP_2 6 +#define IQS626_NUM_CH_GEN 3 +#define IQS626_NUM_CRx_TX 8 + +#define IQS626_PWR_MODE_POLL_SLEEP_US 50000 +#define IQS626_PWR_MODE_POLL_TIMEOUT_US 500000 + +#define iqs626_irq_wait() usleep_range(350, 400) + +enum iqs626_ch_id { + IQS626_CH_ULP_0, + IQS626_CH_TP_2, + IQS626_CH_TP_3, + IQS626_CH_GEN_0, + IQS626_CH_GEN_1, + IQS626_CH_GEN_2, + IQS626_CH_HALL, +}; + +enum iqs626_rx_inactive { + IQS626_RX_INACTIVE_VSS, + IQS626_RX_INACTIVE_FLOAT, + IQS626_RX_INACTIVE_VREG, +}; + +enum iqs626_st_offs { + IQS626_ST_OFFS_PROX, + IQS626_ST_OFFS_DIR, + IQS626_ST_OFFS_TOUCH, + IQS626_ST_OFFS_DEEP, +}; + +enum iqs626_th_offs { + IQS626_TH_OFFS_PROX, + IQS626_TH_OFFS_TOUCH, + IQS626_TH_OFFS_DEEP, +}; + +enum iqs626_event_id { + IQS626_EVENT_PROX_DN, + IQS626_EVENT_PROX_UP, + IQS626_EVENT_TOUCH_DN, + IQS626_EVENT_TOUCH_UP, + IQS626_EVENT_DEEP_DN, + IQS626_EVENT_DEEP_UP, +}; + +enum iqs626_gesture_id { + IQS626_GESTURE_FLICK_X_POS, + IQS626_GESTURE_FLICK_X_NEG, + IQS626_GESTURE_FLICK_Y_POS, + IQS626_GESTURE_FLICK_Y_NEG, + IQS626_GESTURE_TAP, + IQS626_GESTURE_HOLD, + IQS626_NUM_GESTURES, +}; + +struct iqs626_event_desc { + const char *name; + enum iqs626_st_offs st_offs; + enum iqs626_th_offs th_offs; + bool dir_up; + u8 mask; +}; + +static const struct iqs626_event_desc iqs626_events[] = { + [IQS626_EVENT_PROX_DN] = { + .name = "event-prox", + .st_offs = IQS626_ST_OFFS_PROX, + .th_offs = IQS626_TH_OFFS_PROX, + .mask = IQS626_EVENT_MASK_PROX, + }, + [IQS626_EVENT_PROX_UP] = { + .name = "event-prox-alt", + .st_offs = IQS626_ST_OFFS_PROX, + .th_offs = IQS626_TH_OFFS_PROX, + .dir_up = true, + .mask = IQS626_EVENT_MASK_PROX, + }, + [IQS626_EVENT_TOUCH_DN] = { + .name = "event-touch", + .st_offs = IQS626_ST_OFFS_TOUCH, + .th_offs = IQS626_TH_OFFS_TOUCH, + .mask = IQS626_EVENT_MASK_TOUCH, + }, + [IQS626_EVENT_TOUCH_UP] = { + .name = "event-touch-alt", + .st_offs = IQS626_ST_OFFS_TOUCH, + .th_offs = IQS626_TH_OFFS_TOUCH, + .dir_up = true, + .mask = IQS626_EVENT_MASK_TOUCH, + }, + [IQS626_EVENT_DEEP_DN] = { + .name = "event-deep", + .st_offs = IQS626_ST_OFFS_DEEP, + .th_offs = IQS626_TH_OFFS_DEEP, + .mask = IQS626_EVENT_MASK_DEEP, + }, + [IQS626_EVENT_DEEP_UP] = { + .name = "event-deep-alt", + .st_offs = IQS626_ST_OFFS_DEEP, + .th_offs = IQS626_TH_OFFS_DEEP, + .dir_up = true, + .mask = IQS626_EVENT_MASK_DEEP, + }, +}; + +struct iqs626_ver_info { + u8 prod_num; + u8 sw_num; + u8 hw_num; + u8 padding; +} __packed; + +struct iqs626_flags { + __be16 system; + u8 gesture; + u8 padding_a; + u8 states[4]; + u8 ref_active; + u8 padding_b; + u8 comp_min; + u8 comp_max; + u8 trackpad_x; + u8 trackpad_y; +} __packed; + +struct iqs626_ch_reg_ulp { + u8 thresh[2]; + u8 hyst; + u8 filter; + u8 engine[2]; + u8 ati_target; + u8 padding; + __be16 ati_comp; + u8 rx_enable; + u8 tx_enable; +} __packed; + +struct iqs626_ch_reg_tp { + u8 thresh; + u8 ati_base; + __be16 ati_comp; +} __packed; + +struct iqs626_tp_grp_reg { + u8 hyst; + u8 ati_target; + u8 engine[2]; + struct iqs626_ch_reg_tp ch_reg_tp[IQS626_NUM_CH_TP_3]; +} __packed; + +struct iqs626_ch_reg_gen { + u8 thresh[3]; + u8 padding; + u8 hyst; + u8 ati_target; + __be16 ati_comp; + u8 engine[5]; + u8 filter; + u8 rx_enable; + u8 tx_enable; + u8 assoc_select; + u8 assoc_weight; +} __packed; + +struct iqs626_ch_reg_hall { + u8 engine; + u8 thresh; + u8 hyst; + u8 ati_target; + __be16 ati_comp; +} __packed; + +struct iqs626_sys_reg { + __be16 general; + u8 misc_a; + u8 event_mask; + u8 active; + u8 reseed; + u8 rate_np; + u8 rate_lp; + u8 rate_ulp; + u8 timeout_pwr; + u8 timeout_rdy; + u8 timeout_lta; + u8 misc_b; + u8 thresh_swipe; + u8 timeout_tap; + u8 timeout_swipe; + u8 redo_ati; + u8 padding; + struct iqs626_ch_reg_ulp ch_reg_ulp; + struct iqs626_tp_grp_reg tp_grp_reg; + struct iqs626_ch_reg_gen ch_reg_gen[IQS626_NUM_CH_GEN]; + struct iqs626_ch_reg_hall ch_reg_hall; +} __packed; + +struct iqs626_channel_desc { + const char *name; + int num_ch; + u8 active; + bool events[ARRAY_SIZE(iqs626_events)]; +}; + +static const struct iqs626_channel_desc iqs626_channels[] = { + [IQS626_CH_ULP_0] = { + .name = "ulp-0", + .num_ch = 1, + .active = BIT(0), + .events = { + [IQS626_EVENT_PROX_DN] = true, + [IQS626_EVENT_PROX_UP] = true, + [IQS626_EVENT_TOUCH_DN] = true, + [IQS626_EVENT_TOUCH_UP] = true, + }, + }, + [IQS626_CH_TP_2] = { + .name = "trackpad-3x2", + .num_ch = IQS626_NUM_CH_TP_2, + .active = BIT(1), + .events = { + [IQS626_EVENT_TOUCH_DN] = true, + }, + }, + [IQS626_CH_TP_3] = { + .name = "trackpad-3x3", + .num_ch = IQS626_NUM_CH_TP_3, + .active = BIT(2) | BIT(1), + .events = { + [IQS626_EVENT_TOUCH_DN] = true, + }, + }, + [IQS626_CH_GEN_0] = { + .name = "generic-0", + .num_ch = 1, + .active = BIT(4), + .events = { + [IQS626_EVENT_PROX_DN] = true, + [IQS626_EVENT_PROX_UP] = true, + [IQS626_EVENT_TOUCH_DN] = true, + [IQS626_EVENT_TOUCH_UP] = true, + [IQS626_EVENT_DEEP_DN] = true, + [IQS626_EVENT_DEEP_UP] = true, + }, + }, + [IQS626_CH_GEN_1] = { + .name = "generic-1", + .num_ch = 1, + .active = BIT(5), + .events = { + [IQS626_EVENT_PROX_DN] = true, + [IQS626_EVENT_PROX_UP] = true, + [IQS626_EVENT_TOUCH_DN] = true, + [IQS626_EVENT_TOUCH_UP] = true, + [IQS626_EVENT_DEEP_DN] = true, + [IQS626_EVENT_DEEP_UP] = true, + }, + }, + [IQS626_CH_GEN_2] = { + .name = "generic-2", + .num_ch = 1, + .active = BIT(6), + .events = { + [IQS626_EVENT_PROX_DN] = true, + [IQS626_EVENT_PROX_UP] = true, + [IQS626_EVENT_TOUCH_DN] = true, + [IQS626_EVENT_TOUCH_UP] = true, + [IQS626_EVENT_DEEP_DN] = true, + [IQS626_EVENT_DEEP_UP] = true, + }, + }, + [IQS626_CH_HALL] = { + .name = "hall", + .num_ch = 1, + .active = BIT(7), + .events = { + [IQS626_EVENT_TOUCH_DN] = true, + [IQS626_EVENT_TOUCH_UP] = true, + }, + }, +}; + +struct iqs626_private { + struct i2c_client *client; + struct regmap *regmap; + struct iqs626_sys_reg sys_reg; + struct completion ati_done; + struct input_dev *keypad; + struct input_dev *trackpad; + struct touchscreen_properties prop; + unsigned int kp_type[ARRAY_SIZE(iqs626_channels)] + [ARRAY_SIZE(iqs626_events)]; + unsigned int kp_code[ARRAY_SIZE(iqs626_channels)] + [ARRAY_SIZE(iqs626_events)]; + unsigned int tp_code[IQS626_NUM_GESTURES]; + unsigned int suspend_mode; +}; + +static int iqs626_parse_events(struct iqs626_private *iqs626, + const struct fwnode_handle *ch_node, + enum iqs626_ch_id ch_id) +{ + struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg; + struct i2c_client *client = iqs626->client; + const struct fwnode_handle *ev_node; + const char *ev_name; + u8 *thresh, *hyst; + unsigned int thresh_tp[IQS626_NUM_CH_TP_3]; + unsigned int val; + int num_ch = iqs626_channels[ch_id].num_ch; + int error, i, j; + + switch (ch_id) { + case IQS626_CH_ULP_0: + thresh = sys_reg->ch_reg_ulp.thresh; + hyst = &sys_reg->ch_reg_ulp.hyst; + break; + + case IQS626_CH_TP_2: + case IQS626_CH_TP_3: + thresh = &sys_reg->tp_grp_reg.ch_reg_tp[0].thresh; + hyst = &sys_reg->tp_grp_reg.hyst; + break; + + case IQS626_CH_GEN_0: + case IQS626_CH_GEN_1: + case IQS626_CH_GEN_2: + i = ch_id - IQS626_CH_GEN_0; + thresh = sys_reg->ch_reg_gen[i].thresh; + hyst = &sys_reg->ch_reg_gen[i].hyst; + break; + + case IQS626_CH_HALL: + thresh = &sys_reg->ch_reg_hall.thresh; + hyst = &sys_reg->ch_reg_hall.hyst; + break; + + default: + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(iqs626_events); i++) { + if (!iqs626_channels[ch_id].events[i]) + continue; + + if (ch_id == IQS626_CH_TP_2 || ch_id == IQS626_CH_TP_3) { + /* + * Trackpad touch events are simply described under the + * trackpad child node. + */ + ev_node = ch_node; + } else { + ev_name = iqs626_events[i].name; + ev_node = fwnode_get_named_child_node(ch_node, ev_name); + if (!ev_node) + continue; + + if (!fwnode_property_read_u32(ev_node, "linux,code", + &val)) { + iqs626->kp_code[ch_id][i] = val; + + if (fwnode_property_read_u32(ev_node, + "linux,input-type", + &val)) { + if (ch_id == IQS626_CH_HALL) + val = EV_SW; + else + val = EV_KEY; + } + + if (val != EV_KEY && val != EV_SW) { + dev_err(&client->dev, + "Invalid input type: %u\n", + val); + return -EINVAL; + } + + iqs626->kp_type[ch_id][i] = val; + + sys_reg->event_mask &= ~iqs626_events[i].mask; + } + } + + if (!fwnode_property_read_u32(ev_node, "azoteq,hyst", &val)) { + if (val > IQS626_CHx_HYST_MAX) { + dev_err(&client->dev, + "Invalid %s channel hysteresis: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + if (i == IQS626_EVENT_DEEP_DN || + i == IQS626_EVENT_DEEP_UP) { + *hyst &= ~IQS626_CHx_HYST_DEEP_MASK; + *hyst |= (val << IQS626_CHx_HYST_DEEP_SHIFT); + } else if (i == IQS626_EVENT_TOUCH_DN || + i == IQS626_EVENT_TOUCH_UP) { + *hyst &= ~IQS626_CHx_HYST_TOUCH_MASK; + *hyst |= val; + } + } + + if (ch_id != IQS626_CH_TP_2 && ch_id != IQS626_CH_TP_3 && + !fwnode_property_read_u32(ev_node, "azoteq,thresh", &val)) { + if (val > IQS626_CHx_THRESH_MAX) { + dev_err(&client->dev, + "Invalid %s channel threshold: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + if (ch_id == IQS626_CH_HALL) + *thresh = val; + else + *(thresh + iqs626_events[i].th_offs) = val; + + continue; + } + + if (!fwnode_property_present(ev_node, "azoteq,thresh")) + continue; + + error = fwnode_property_read_u32_array(ev_node, "azoteq,thresh", + thresh_tp, num_ch); + if (error) { + dev_err(&client->dev, + "Failed to read %s channel thresholds: %d\n", + fwnode_get_name(ch_node), error); + return error; + } + + for (j = 0; j < num_ch; j++) { + if (thresh_tp[j] > IQS626_CHx_THRESH_MAX) { + dev_err(&client->dev, + "Invalid %s channel threshold: %u\n", + fwnode_get_name(ch_node), thresh_tp[j]); + return -EINVAL; + } + + sys_reg->tp_grp_reg.ch_reg_tp[j].thresh = thresh_tp[j]; + } + } + + return 0; +} + +static int iqs626_parse_ati_target(struct iqs626_private *iqs626, + const struct fwnode_handle *ch_node, + enum iqs626_ch_id ch_id) +{ + struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg; + struct i2c_client *client = iqs626->client; + unsigned int ati_base[IQS626_NUM_CH_TP_3]; + unsigned int val; + u8 *ati_target; + int num_ch = iqs626_channels[ch_id].num_ch; + int error, i; + + switch (ch_id) { + case IQS626_CH_ULP_0: + ati_target = &sys_reg->ch_reg_ulp.ati_target; + break; + + case IQS626_CH_TP_2: + case IQS626_CH_TP_3: + ati_target = &sys_reg->tp_grp_reg.ati_target; + break; + + case IQS626_CH_GEN_0: + case IQS626_CH_GEN_1: + case IQS626_CH_GEN_2: + i = ch_id - IQS626_CH_GEN_0; + ati_target = &sys_reg->ch_reg_gen[i].ati_target; + break; + + case IQS626_CH_HALL: + ati_target = &sys_reg->ch_reg_hall.ati_target; + break; + + default: + return -EINVAL; + } + + if (!fwnode_property_read_u32(ch_node, "azoteq,ati-target", &val)) { + if (val > IQS626_CHx_ATI_TARGET_MAX) { + dev_err(&client->dev, + "Invalid %s channel ATI target: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + *ati_target &= ~IQS626_CHx_ATI_TARGET_MASK; + *ati_target |= (val / 32); + } + + if (ch_id != IQS626_CH_TP_2 && ch_id != IQS626_CH_TP_3 && + !fwnode_property_read_u32(ch_node, "azoteq,ati-base", &val)) { + switch (val) { + case 75: + val = IQS626_CHx_ATI_BASE_75; + break; + + case 100: + val = IQS626_CHx_ATI_BASE_100; + break; + + case 150: + val = IQS626_CHx_ATI_BASE_150; + break; + + case 200: + val = IQS626_CHx_ATI_BASE_200; + break; + + default: + dev_err(&client->dev, + "Invalid %s channel ATI base: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + *ati_target &= ~IQS626_CHx_ATI_BASE_MASK; + *ati_target |= val; + + return 0; + } + + if (!fwnode_property_present(ch_node, "azoteq,ati-base")) + return 0; + + error = fwnode_property_read_u32_array(ch_node, "azoteq,ati-base", + ati_base, num_ch); + if (error) { + dev_err(&client->dev, + "Failed to read %s channel ATI bases: %d\n", + fwnode_get_name(ch_node), error); + return error; + } + + for (i = 0; i < num_ch; i++) { + if (ati_base[i] < IQS626_TPx_ATI_BASE_MIN || + ati_base[i] > IQS626_TPx_ATI_BASE_MAX) { + dev_err(&client->dev, + "Invalid %s channel ATI base: %u\n", + fwnode_get_name(ch_node), ati_base[i]); + return -EINVAL; + } + + ati_base[i] -= IQS626_TPx_ATI_BASE_MIN; + sys_reg->tp_grp_reg.ch_reg_tp[i].ati_base = ati_base[i]; + } + + return 0; +} + +static int iqs626_parse_pins(struct iqs626_private *iqs626, + const struct fwnode_handle *ch_node, + const char *propname, u8 *enable) +{ + struct i2c_client *client = iqs626->client; + unsigned int val[IQS626_NUM_CRx_TX]; + int error, count, i; + + if (!fwnode_property_present(ch_node, propname)) + return 0; + + count = fwnode_property_count_u32(ch_node, propname); + if (count > IQS626_NUM_CRx_TX) { + dev_err(&client->dev, + "Too many %s channel CRX/TX pins present\n", + fwnode_get_name(ch_node)); + return -EINVAL; + } else if (count < 0) { + dev_err(&client->dev, + "Failed to count %s channel CRX/TX pins: %d\n", + fwnode_get_name(ch_node), count); + return count; + } + + error = fwnode_property_read_u32_array(ch_node, propname, val, count); + if (error) { + dev_err(&client->dev, + "Failed to read %s channel CRX/TX pins: %d\n", + fwnode_get_name(ch_node), error); + return error; + } + + *enable = 0; + + for (i = 0; i < count; i++) { + if (val[i] >= IQS626_NUM_CRx_TX) { + dev_err(&client->dev, + "Invalid %s channel CRX/TX pin: %u\n", + fwnode_get_name(ch_node), val[i]); + return -EINVAL; + } + + *enable |= BIT(val[i]); + } + + return 0; +} + +static int iqs626_parse_trackpad(struct iqs626_private *iqs626, + const struct fwnode_handle *ch_node) +{ + struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg; + struct i2c_client *client = iqs626->client; + u8 *hyst = &sys_reg->tp_grp_reg.hyst; + unsigned int val; + int error, count; + + if (!fwnode_property_read_u32(ch_node, "azoteq,lta-update", &val)) { + if (val > IQS626_MISC_A_TPx_LTA_UPDATE_MAX) { + dev_err(&client->dev, + "Invalid %s channel update rate: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + sys_reg->misc_a &= ~IQS626_MISC_A_TPx_LTA_UPDATE_MASK; + sys_reg->misc_a |= (val << IQS626_MISC_A_TPx_LTA_UPDATE_SHIFT); + } + + if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-trackpad", + &val)) { + if (val > IQS626_FILT_STR_MAX) { + dev_err(&client->dev, + "Invalid %s channel filter strength: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + sys_reg->misc_b &= ~IQS626_MISC_B_FILT_STR_TPx; + sys_reg->misc_b |= val; + } + + if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-np-cnt", + &val)) { + if (val > IQS626_FILT_STR_MAX) { + dev_err(&client->dev, + "Invalid %s channel filter strength: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + *hyst &= ~IQS626_FILT_STR_NP_TPx_MASK; + *hyst |= (val << IQS626_FILT_STR_NP_TPx_SHIFT); + } + + if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-lp-cnt", + &val)) { + if (val > IQS626_FILT_STR_MAX) { + dev_err(&client->dev, + "Invalid %s channel filter strength: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + *hyst &= ~IQS626_FILT_STR_LP_TPx_MASK; + *hyst |= (val << IQS626_FILT_STR_LP_TPx_SHIFT); + } + + if (!fwnode_property_present(ch_node, "linux,keycodes")) + return 0; + + count = fwnode_property_count_u32(ch_node, "linux,keycodes"); + if (count > IQS626_NUM_GESTURES) { + dev_err(&client->dev, "Too many keycodes present\n"); + return -EINVAL; + } else if (count < 0) { + dev_err(&client->dev, "Failed to count keycodes: %d\n", count); + return count; + } + + error = fwnode_property_read_u32_array(ch_node, "linux,keycodes", + iqs626->tp_code, count); + if (error) { + dev_err(&client->dev, "Failed to read keycodes: %d\n", error); + return error; + } + + sys_reg->misc_b &= ~IQS626_MISC_B_TPx_SWIPE; + if (fwnode_property_present(ch_node, "azoteq,gesture-swipe")) + sys_reg->misc_b |= IQS626_MISC_B_TPx_SWIPE; + + if (!fwnode_property_read_u32(ch_node, "azoteq,timeout-tap-ms", + &val)) { + if (val > IQS626_TIMEOUT_TAP_MS_MAX) { + dev_err(&client->dev, + "Invalid %s channel timeout: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + sys_reg->timeout_tap = val / 16; + } + + if (!fwnode_property_read_u32(ch_node, "azoteq,timeout-swipe-ms", + &val)) { + if (val > IQS626_TIMEOUT_SWIPE_MS_MAX) { + dev_err(&client->dev, + "Invalid %s channel timeout: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + sys_reg->timeout_swipe = val / 16; + } + + if (!fwnode_property_read_u32(ch_node, "azoteq,thresh-swipe", + &val)) { + if (val > IQS626_THRESH_SWIPE_MAX) { + dev_err(&client->dev, + "Invalid %s channel threshold: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + sys_reg->thresh_swipe = val; + } + + sys_reg->event_mask &= ~IQS626_EVENT_MASK_GESTURE; + + return 0; +} + +static int iqs626_parse_channel(struct iqs626_private *iqs626, + const struct fwnode_handle *ch_node, + enum iqs626_ch_id ch_id) +{ + struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg; + struct i2c_client *client = iqs626->client; + u8 *engine, *filter, *rx_enable, *tx_enable; + u8 *assoc_select, *assoc_weight; + unsigned int val; + int error, i; + + switch (ch_id) { + case IQS626_CH_ULP_0: + engine = sys_reg->ch_reg_ulp.engine; + break; + + case IQS626_CH_TP_2: + case IQS626_CH_TP_3: + engine = sys_reg->tp_grp_reg.engine; + break; + + case IQS626_CH_GEN_0: + case IQS626_CH_GEN_1: + case IQS626_CH_GEN_2: + i = ch_id - IQS626_CH_GEN_0; + engine = sys_reg->ch_reg_gen[i].engine; + break; + + case IQS626_CH_HALL: + engine = &sys_reg->ch_reg_hall.engine; + break; + + default: + return -EINVAL; + } + + *engine |= IQS626_CHx_ENG_0_MEAS_CAP_SIZE; + if (fwnode_property_present(ch_node, "azoteq,meas-cap-decrease")) + *engine &= ~IQS626_CHx_ENG_0_MEAS_CAP_SIZE; + + *engine |= IQS626_CHx_ENG_0_RX_TERM_VSS; + if (!fwnode_property_read_u32(ch_node, "azoteq,rx-inactive", &val)) { + switch (val) { + case IQS626_RX_INACTIVE_VSS: + break; + + case IQS626_RX_INACTIVE_FLOAT: + *engine &= ~IQS626_CHx_ENG_0_RX_TERM_VSS; + if (ch_id == IQS626_CH_GEN_0 || + ch_id == IQS626_CH_GEN_1 || + ch_id == IQS626_CH_GEN_2) + *(engine + 4) &= ~IQS626_CHx_ENG_4_RX_TERM_VREG; + break; + + case IQS626_RX_INACTIVE_VREG: + if (ch_id == IQS626_CH_GEN_0 || + ch_id == IQS626_CH_GEN_1 || + ch_id == IQS626_CH_GEN_2) { + *engine &= ~IQS626_CHx_ENG_0_RX_TERM_VSS; + *(engine + 4) |= IQS626_CHx_ENG_4_RX_TERM_VREG; + break; + } + fallthrough; + + default: + dev_err(&client->dev, + "Invalid %s channel CRX pin termination: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + } + + *engine &= ~IQS626_CHx_ENG_0_LINEARIZE; + if (fwnode_property_present(ch_node, "azoteq,linearize")) + *engine |= IQS626_CHx_ENG_0_LINEARIZE; + + *engine &= ~IQS626_CHx_ENG_0_DUAL_DIR; + if (fwnode_property_present(ch_node, "azoteq,dual-direction")) + *engine |= IQS626_CHx_ENG_0_DUAL_DIR; + + *engine &= ~IQS626_CHx_ENG_0_FILT_DISABLE; + if (fwnode_property_present(ch_node, "azoteq,filt-disable")) + *engine |= IQS626_CHx_ENG_0_FILT_DISABLE; + + if (!fwnode_property_read_u32(ch_node, "azoteq,ati-mode", &val)) { + if (val > IQS626_CHx_ENG_0_ATI_MODE_MAX) { + dev_err(&client->dev, + "Invalid %s channel ATI mode: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + *engine &= ~IQS626_CHx_ENG_0_ATI_MODE_MASK; + *engine |= val; + } + + if (ch_id == IQS626_CH_HALL) + return 0; + + *(engine + 1) &= ~IQS626_CHx_ENG_1_CCT_ENABLE; + if (!fwnode_property_read_u32(ch_node, "azoteq,cct-increase", + &val) && val) { + unsigned int orig_val = val--; + + /* + * In the case of the generic channels, the charge cycle time + * field doubles in size and straddles two separate registers. + */ + if (ch_id == IQS626_CH_GEN_0 || + ch_id == IQS626_CH_GEN_1 || + ch_id == IQS626_CH_GEN_2) { + *(engine + 4) &= ~IQS626_CHx_ENG_4_CCT_LOW_1; + if (val & BIT(1)) + *(engine + 4) |= IQS626_CHx_ENG_4_CCT_LOW_1; + + *(engine + 4) &= ~IQS626_CHx_ENG_4_CCT_LOW_0; + if (val & BIT(0)) + *(engine + 4) |= IQS626_CHx_ENG_4_CCT_LOW_0; + + val >>= 2; + } + + if (val & ~GENMASK(1, 0)) { + dev_err(&client->dev, + "Invalid %s channel charge cycle time: %u\n", + fwnode_get_name(ch_node), orig_val); + return -EINVAL; + } + + *(engine + 1) &= ~IQS626_CHx_ENG_1_CCT_HIGH_1; + if (val & BIT(1)) + *(engine + 1) |= IQS626_CHx_ENG_1_CCT_HIGH_1; + + *(engine + 1) &= ~IQS626_CHx_ENG_1_CCT_HIGH_0; + if (val & BIT(0)) + *(engine + 1) |= IQS626_CHx_ENG_1_CCT_HIGH_0; + + *(engine + 1) |= IQS626_CHx_ENG_1_CCT_ENABLE; + } + + if (!fwnode_property_read_u32(ch_node, "azoteq,proj-bias", &val)) { + if (val > IQS626_CHx_ENG_1_PROJ_BIAS_MAX) { + dev_err(&client->dev, + "Invalid %s channel bias current: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + *(engine + 1) &= ~IQS626_CHx_ENG_1_PROJ_BIAS_MASK; + *(engine + 1) |= (val << IQS626_CHx_ENG_1_PROJ_BIAS_SHIFT); + } + + if (!fwnode_property_read_u32(ch_node, "azoteq,sense-freq", &val)) { + if (val > IQS626_CHx_ENG_1_SENSE_FREQ_MAX) { + dev_err(&client->dev, + "Invalid %s channel sensing frequency: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + *(engine + 1) &= ~IQS626_CHx_ENG_1_SENSE_FREQ_MASK; + *(engine + 1) |= (val << IQS626_CHx_ENG_1_SENSE_FREQ_SHIFT); + } + + *(engine + 1) &= ~IQS626_CHx_ENG_1_ATI_BAND_TIGHTEN; + if (fwnode_property_present(ch_node, "azoteq,ati-band-tighten")) + *(engine + 1) |= IQS626_CHx_ENG_1_ATI_BAND_TIGHTEN; + + if (ch_id == IQS626_CH_TP_2 || ch_id == IQS626_CH_TP_3) + return iqs626_parse_trackpad(iqs626, ch_node); + + if (ch_id == IQS626_CH_ULP_0) { + sys_reg->ch_reg_ulp.hyst &= ~IQS626_ULP_PROJ_ENABLE; + if (fwnode_property_present(ch_node, "azoteq,proj-enable")) + sys_reg->ch_reg_ulp.hyst |= IQS626_ULP_PROJ_ENABLE; + + filter = &sys_reg->ch_reg_ulp.filter; + + rx_enable = &sys_reg->ch_reg_ulp.rx_enable; + tx_enable = &sys_reg->ch_reg_ulp.tx_enable; + } else { + i = ch_id - IQS626_CH_GEN_0; + filter = &sys_reg->ch_reg_gen[i].filter; + + rx_enable = &sys_reg->ch_reg_gen[i].rx_enable; + tx_enable = &sys_reg->ch_reg_gen[i].tx_enable; + } + + if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-np-cnt", + &val)) { + if (val > IQS626_FILT_STR_MAX) { + dev_err(&client->dev, + "Invalid %s channel filter strength: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + *filter &= ~IQS626_FILT_STR_NP_CNT_MASK; + *filter |= (val << IQS626_FILT_STR_NP_CNT_SHIFT); + } + + if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-lp-cnt", + &val)) { + if (val > IQS626_FILT_STR_MAX) { + dev_err(&client->dev, + "Invalid %s channel filter strength: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + *filter &= ~IQS626_FILT_STR_LP_CNT_MASK; + *filter |= (val << IQS626_FILT_STR_LP_CNT_SHIFT); + } + + if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-np-lta", + &val)) { + if (val > IQS626_FILT_STR_MAX) { + dev_err(&client->dev, + "Invalid %s channel filter strength: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + *filter &= ~IQS626_FILT_STR_NP_LTA_MASK; + *filter |= (val << IQS626_FILT_STR_NP_LTA_SHIFT); + } + + if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-lp-lta", + &val)) { + if (val > IQS626_FILT_STR_MAX) { + dev_err(&client->dev, + "Invalid %s channel filter strength: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + *filter &= ~IQS626_FILT_STR_LP_LTA_MASK; + *filter |= val; + } + + error = iqs626_parse_pins(iqs626, ch_node, "azoteq,rx-enable", + rx_enable); + if (error) + return error; + + error = iqs626_parse_pins(iqs626, ch_node, "azoteq,tx-enable", + tx_enable); + if (error) + return error; + + if (ch_id == IQS626_CH_ULP_0) + return 0; + + *(engine + 2) &= ~IQS626_CHx_ENG_2_LOCAL_CAP_ENABLE; + if (!fwnode_property_read_u32(ch_node, "azoteq,local-cap-size", + &val) && val) { + unsigned int orig_val = val--; + + if (val > IQS626_CHx_ENG_2_LOCAL_CAP_MAX) { + dev_err(&client->dev, + "Invalid %s channel local cap. size: %u\n", + fwnode_get_name(ch_node), orig_val); + return -EINVAL; + } + + *(engine + 2) &= ~IQS626_CHx_ENG_2_LOCAL_CAP_MASK; + *(engine + 2) |= (val << IQS626_CHx_ENG_2_LOCAL_CAP_SHIFT); + + *(engine + 2) |= IQS626_CHx_ENG_2_LOCAL_CAP_ENABLE; + } + + if (!fwnode_property_read_u32(ch_node, "azoteq,sense-mode", &val)) { + if (val > IQS626_CHx_ENG_2_SENSE_MODE_MAX) { + dev_err(&client->dev, + "Invalid %s channel sensing mode: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + *(engine + 2) &= ~IQS626_CHx_ENG_2_SENSE_MODE_MASK; + *(engine + 2) |= val; + } + + if (!fwnode_property_read_u32(ch_node, "azoteq,tx-freq", &val)) { + if (val > IQS626_CHx_ENG_3_TX_FREQ_MAX) { + dev_err(&client->dev, + "Invalid %s channel excitation frequency: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + *(engine + 3) &= ~IQS626_CHx_ENG_3_TX_FREQ_MASK; + *(engine + 3) |= (val << IQS626_CHx_ENG_3_TX_FREQ_SHIFT); + } + + *(engine + 3) &= ~IQS626_CHx_ENG_3_INV_LOGIC; + if (fwnode_property_present(ch_node, "azoteq,invert-enable")) + *(engine + 3) |= IQS626_CHx_ENG_3_INV_LOGIC; + + *(engine + 4) &= ~IQS626_CHx_ENG_4_COMP_DISABLE; + if (fwnode_property_present(ch_node, "azoteq,comp-disable")) + *(engine + 4) |= IQS626_CHx_ENG_4_COMP_DISABLE; + + *(engine + 4) &= ~IQS626_CHx_ENG_4_STATIC_ENABLE; + if (fwnode_property_present(ch_node, "azoteq,static-enable")) + *(engine + 4) |= IQS626_CHx_ENG_4_STATIC_ENABLE; + + i = ch_id - IQS626_CH_GEN_0; + assoc_select = &sys_reg->ch_reg_gen[i].assoc_select; + assoc_weight = &sys_reg->ch_reg_gen[i].assoc_weight; + + *assoc_select = 0; + if (!fwnode_property_present(ch_node, "azoteq,assoc-select")) + return 0; + + for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) { + if (fwnode_property_match_string(ch_node, "azoteq,assoc-select", + iqs626_channels[i].name) < 0) + continue; + + *assoc_select |= iqs626_channels[i].active; + } + + if (fwnode_property_read_u32(ch_node, "azoteq,assoc-weight", &val)) + return 0; + + if (val > IQS626_GEN_WEIGHT_MAX) { + dev_err(&client->dev, + "Invalid %s channel associated weight: %u\n", + fwnode_get_name(ch_node), val); + return -EINVAL; + } + + *assoc_weight = val; + + return 0; +} + +static int iqs626_parse_prop(struct iqs626_private *iqs626) +{ + struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg; + struct i2c_client *client = iqs626->client; + struct fwnode_handle *ch_node; + unsigned int val; + int error, i; + u16 general; + + if (!device_property_read_u32(&client->dev, "azoteq,suspend-mode", + &val)) { + if (val > IQS626_SYS_SETTINGS_PWR_MODE_MAX) { + dev_err(&client->dev, "Invalid suspend mode: %u\n", + val); + return -EINVAL; + } + + iqs626->suspend_mode = val; + } + + error = regmap_raw_read(iqs626->regmap, IQS626_SYS_SETTINGS, sys_reg, + sizeof(*sys_reg)); + if (error) + return error; + + general = be16_to_cpu(sys_reg->general); + general &= IQS626_SYS_SETTINGS_ULP_UPDATE_MASK; + + if (device_property_present(&client->dev, "azoteq,clk-div")) + general |= IQS626_SYS_SETTINGS_CLK_DIV; + + if (device_property_present(&client->dev, "azoteq,ulp-enable")) + general |= IQS626_SYS_SETTINGS_ULP_AUTO; + + if (!device_property_read_u32(&client->dev, "azoteq,ulp-update", + &val)) { + if (val > IQS626_SYS_SETTINGS_ULP_UPDATE_MAX) { + dev_err(&client->dev, "Invalid update rate: %u\n", val); + return -EINVAL; + } + + general &= ~IQS626_SYS_SETTINGS_ULP_UPDATE_MASK; + general |= (val << IQS626_SYS_SETTINGS_ULP_UPDATE_SHIFT); + } + + sys_reg->misc_a &= ~IQS626_MISC_A_ATI_BAND_DISABLE; + if (device_property_present(&client->dev, "azoteq,ati-band-disable")) + sys_reg->misc_a |= IQS626_MISC_A_ATI_BAND_DISABLE; + + sys_reg->misc_a &= ~IQS626_MISC_A_ATI_LP_ONLY; + if (device_property_present(&client->dev, "azoteq,ati-lp-only")) + sys_reg->misc_a |= IQS626_MISC_A_ATI_LP_ONLY; + + if (!device_property_read_u32(&client->dev, "azoteq,gpio3-select", + &val)) { + if (val > IQS626_MISC_A_GPIO3_SELECT_MAX) { + dev_err(&client->dev, "Invalid GPIO3 selection: %u\n", + val); + return -EINVAL; + } + + sys_reg->misc_a &= ~IQS626_MISC_A_GPIO3_SELECT_MASK; + sys_reg->misc_a |= val; + } + + if (!device_property_read_u32(&client->dev, "azoteq,reseed-select", + &val)) { + if (val > IQS626_MISC_B_RESEED_UI_SEL_MAX) { + dev_err(&client->dev, "Invalid reseed selection: %u\n", + val); + return -EINVAL; + } + + sys_reg->misc_b &= ~IQS626_MISC_B_RESEED_UI_SEL_MASK; + sys_reg->misc_b |= (val << IQS626_MISC_B_RESEED_UI_SEL_SHIFT); + } + + sys_reg->misc_b &= ~IQS626_MISC_B_THRESH_EXTEND; + if (device_property_present(&client->dev, "azoteq,thresh-extend")) + sys_reg->misc_b |= IQS626_MISC_B_THRESH_EXTEND; + + sys_reg->misc_b &= ~IQS626_MISC_B_TRACKING_UI_ENABLE; + if (device_property_present(&client->dev, "azoteq,tracking-enable")) + sys_reg->misc_b |= IQS626_MISC_B_TRACKING_UI_ENABLE; + + sys_reg->misc_b &= ~IQS626_MISC_B_RESEED_OFFSET; + if (device_property_present(&client->dev, "azoteq,reseed-offset")) + sys_reg->misc_b |= IQS626_MISC_B_RESEED_OFFSET; + + if (!device_property_read_u32(&client->dev, "azoteq,rate-np-ms", + &val)) { + if (val > IQS626_RATE_NP_MS_MAX) { + dev_err(&client->dev, "Invalid report rate: %u\n", val); + return -EINVAL; + } + + sys_reg->rate_np = val; + } + + if (!device_property_read_u32(&client->dev, "azoteq,rate-lp-ms", + &val)) { + if (val > IQS626_RATE_LP_MS_MAX) { + dev_err(&client->dev, "Invalid report rate: %u\n", val); + return -EINVAL; + } + + sys_reg->rate_lp = val; + } + + if (!device_property_read_u32(&client->dev, "azoteq,rate-ulp-ms", + &val)) { + if (val > IQS626_RATE_ULP_MS_MAX) { + dev_err(&client->dev, "Invalid report rate: %u\n", val); + return -EINVAL; + } + + sys_reg->rate_ulp = val / 16; + } + + if (!device_property_read_u32(&client->dev, "azoteq,timeout-pwr-ms", + &val)) { + if (val > IQS626_TIMEOUT_PWR_MS_MAX) { + dev_err(&client->dev, "Invalid timeout: %u\n", val); + return -EINVAL; + } + + sys_reg->timeout_pwr = val / 512; + } + + if (!device_property_read_u32(&client->dev, "azoteq,timeout-lta-ms", + &val)) { + if (val > IQS626_TIMEOUT_LTA_MS_MAX) { + dev_err(&client->dev, "Invalid timeout: %u\n", val); + return -EINVAL; + } + + sys_reg->timeout_lta = val / 512; + } + + sys_reg->event_mask = ~((u8)IQS626_EVENT_MASK_SYS); + sys_reg->redo_ati = 0; + + sys_reg->reseed = 0; + sys_reg->active = 0; + + for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) { + ch_node = device_get_named_child_node(&client->dev, + iqs626_channels[i].name); + if (!ch_node) + continue; + + error = iqs626_parse_channel(iqs626, ch_node, i); + if (error) + return error; + + error = iqs626_parse_ati_target(iqs626, ch_node, i); + if (error) + return error; + + error = iqs626_parse_events(iqs626, ch_node, i); + if (error) + return error; + + if (!fwnode_property_present(ch_node, "azoteq,ati-exclude")) + sys_reg->redo_ati |= iqs626_channels[i].active; + + if (!fwnode_property_present(ch_node, "azoteq,reseed-disable")) + sys_reg->reseed |= iqs626_channels[i].active; + + sys_reg->active |= iqs626_channels[i].active; + } + + general |= IQS626_SYS_SETTINGS_EVENT_MODE; + + /* + * Enable streaming during normal-power mode if the trackpad is used to + * report raw coordinates instead of gestures. In that case, the device + * returns to event mode during low-power mode. + */ + if (sys_reg->active & iqs626_channels[IQS626_CH_TP_2].active && + sys_reg->event_mask & IQS626_EVENT_MASK_GESTURE) + general |= IQS626_SYS_SETTINGS_EVENT_MODE_LP; + + general |= IQS626_SYS_SETTINGS_REDO_ATI; + general |= IQS626_SYS_SETTINGS_ACK_RESET; + + sys_reg->general = cpu_to_be16(general); + + error = regmap_raw_write(iqs626->regmap, IQS626_SYS_SETTINGS, + &iqs626->sys_reg, sizeof(iqs626->sys_reg)); + if (error) + return error; + + iqs626_irq_wait(); + + return 0; +} + +static int iqs626_input_init(struct iqs626_private *iqs626) +{ + struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg; + struct i2c_client *client = iqs626->client; + int error, i, j; + + iqs626->keypad = devm_input_allocate_device(&client->dev); + if (!iqs626->keypad) + return -ENOMEM; + + iqs626->keypad->keycodemax = ARRAY_SIZE(iqs626->kp_code); + iqs626->keypad->keycode = iqs626->kp_code; + iqs626->keypad->keycodesize = sizeof(**iqs626->kp_code); + + iqs626->keypad->name = "iqs626a_keypad"; + iqs626->keypad->id.bustype = BUS_I2C; + + for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) { + if (!(sys_reg->active & iqs626_channels[i].active)) + continue; + + for (j = 0; j < ARRAY_SIZE(iqs626_events); j++) { + if (!iqs626->kp_type[i][j]) + continue; + + input_set_capability(iqs626->keypad, + iqs626->kp_type[i][j], + iqs626->kp_code[i][j]); + } + } + + if (!(sys_reg->active & iqs626_channels[IQS626_CH_TP_2].active)) + return 0; + + iqs626->trackpad = devm_input_allocate_device(&client->dev); + if (!iqs626->trackpad) + return -ENOMEM; + + iqs626->trackpad->keycodemax = ARRAY_SIZE(iqs626->tp_code); + iqs626->trackpad->keycode = iqs626->tp_code; + iqs626->trackpad->keycodesize = sizeof(*iqs626->tp_code); + + iqs626->trackpad->name = "iqs626a_trackpad"; + iqs626->trackpad->id.bustype = BUS_I2C; + + /* + * Present the trackpad as a traditional pointing device if no gestures + * have been mapped to a keycode. + */ + if (sys_reg->event_mask & IQS626_EVENT_MASK_GESTURE) { + u8 tp_mask = iqs626_channels[IQS626_CH_TP_3].active; + + input_set_capability(iqs626->trackpad, EV_KEY, BTN_TOUCH); + input_set_abs_params(iqs626->trackpad, ABS_Y, 0, 255, 0, 0); + + if ((sys_reg->active & tp_mask) == tp_mask) + input_set_abs_params(iqs626->trackpad, + ABS_X, 0, 255, 0, 0); + else + input_set_abs_params(iqs626->trackpad, + ABS_X, 0, 128, 0, 0); + + touchscreen_parse_properties(iqs626->trackpad, false, + &iqs626->prop); + } else { + for (i = 0; i < IQS626_NUM_GESTURES; i++) + if (iqs626->tp_code[i] != KEY_RESERVED) + input_set_capability(iqs626->trackpad, EV_KEY, + iqs626->tp_code[i]); + } + + error = input_register_device(iqs626->trackpad); + if (error) + dev_err(&client->dev, "Failed to register trackpad: %d\n", + error); + + return error; +} + +static int iqs626_report(struct iqs626_private *iqs626) +{ + struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg; + struct i2c_client *client = iqs626->client; + struct iqs626_flags flags; + __le16 hall_output; + int error, i, j; + u8 state; + u8 *dir_mask = &flags.states[IQS626_ST_OFFS_DIR]; + + error = regmap_raw_read(iqs626->regmap, IQS626_SYS_FLAGS, &flags, + sizeof(flags)); + if (error) { + dev_err(&client->dev, "Failed to read device status: %d\n", + error); + return error; + } + + /* + * The device resets itself if its own watchdog bites, which can happen + * in the event of an I2C communication error. In this case, the device + * asserts a SHOW_RESET interrupt and all registers must be restored. + */ + if (be16_to_cpu(flags.system) & IQS626_SYS_FLAGS_SHOW_RESET) { + dev_err(&client->dev, "Unexpected device reset\n"); + + error = regmap_raw_write(iqs626->regmap, IQS626_SYS_SETTINGS, + sys_reg, sizeof(*sys_reg)); + if (error) + dev_err(&client->dev, + "Failed to re-initialize device: %d\n", error); + + return error; + } + + if (be16_to_cpu(flags.system) & IQS626_SYS_FLAGS_IN_ATI) + return 0; + + /* + * Unlike the ULP or generic channels, the Hall channel does not have a + * direction flag. Instead, the direction (i.e. magnet polarity) can be + * derived based on the sign of the 2's complement differential output. + */ + if (sys_reg->active & iqs626_channels[IQS626_CH_HALL].active) { + error = regmap_raw_read(iqs626->regmap, IQS626_HALL_OUTPUT, + &hall_output, sizeof(hall_output)); + if (error) { + dev_err(&client->dev, + "Failed to read Hall output: %d\n", error); + return error; + } + + *dir_mask &= ~iqs626_channels[IQS626_CH_HALL].active; + if (le16_to_cpu(hall_output) < 0x8000) + *dir_mask |= iqs626_channels[IQS626_CH_HALL].active; + } + + for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) { + if (!(sys_reg->active & iqs626_channels[i].active)) + continue; + + for (j = 0; j < ARRAY_SIZE(iqs626_events); j++) { + if (!iqs626->kp_type[i][j]) + continue; + + state = flags.states[iqs626_events[j].st_offs]; + state &= iqs626_events[j].dir_up ? *dir_mask + : ~(*dir_mask); + state &= iqs626_channels[i].active; + + input_event(iqs626->keypad, iqs626->kp_type[i][j], + iqs626->kp_code[i][j], !!state); + } + } + + input_sync(iqs626->keypad); + + /* + * The following completion signals that ATI has finished, any initial + * switch states have been reported and the keypad can be registered. + */ + complete_all(&iqs626->ati_done); + + if (!(sys_reg->active & iqs626_channels[IQS626_CH_TP_2].active)) + return 0; + + if (sys_reg->event_mask & IQS626_EVENT_MASK_GESTURE) { + state = flags.states[IQS626_ST_OFFS_TOUCH]; + state &= iqs626_channels[IQS626_CH_TP_2].active; + + input_report_key(iqs626->trackpad, BTN_TOUCH, state); + + if (state) + touchscreen_report_pos(iqs626->trackpad, &iqs626->prop, + flags.trackpad_x, + flags.trackpad_y, false); + } else { + for (i = 0; i < IQS626_NUM_GESTURES; i++) + input_report_key(iqs626->trackpad, iqs626->tp_code[i], + flags.gesture & BIT(i)); + + if (flags.gesture & GENMASK(IQS626_GESTURE_TAP, 0)) { + input_sync(iqs626->trackpad); + + /* + * Momentary gestures are followed by a complementary + * release cycle so as to emulate a full keystroke. + */ + for (i = 0; i < IQS626_GESTURE_HOLD; i++) + input_report_key(iqs626->trackpad, + iqs626->tp_code[i], 0); + } + } + + input_sync(iqs626->trackpad); + + return 0; +} + +static irqreturn_t iqs626_irq(int irq, void *context) +{ + struct iqs626_private *iqs626 = context; + + if (iqs626_report(iqs626)) + return IRQ_NONE; + + /* + * The device does not deassert its interrupt (RDY) pin until shortly + * after receiving an I2C stop condition; the following delay ensures + * the interrupt handler does not return before this time. + */ + iqs626_irq_wait(); + + return IRQ_HANDLED; +} + +static const struct regmap_config iqs626_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = IQS626_MAX_REG, +}; + +static int iqs626_probe(struct i2c_client *client) +{ + struct iqs626_ver_info ver_info; + struct iqs626_private *iqs626; + int error; + + iqs626 = devm_kzalloc(&client->dev, sizeof(*iqs626), GFP_KERNEL); + if (!iqs626) + return -ENOMEM; + + i2c_set_clientdata(client, iqs626); + iqs626->client = client; + + iqs626->regmap = devm_regmap_init_i2c(client, &iqs626_regmap_config); + if (IS_ERR(iqs626->regmap)) { + error = PTR_ERR(iqs626->regmap); + dev_err(&client->dev, "Failed to initialize register map: %d\n", + error); + return error; + } + + init_completion(&iqs626->ati_done); + + error = regmap_raw_read(iqs626->regmap, IQS626_VER_INFO, &ver_info, + sizeof(ver_info)); + if (error) + return error; + + if (ver_info.prod_num != IQS626_VER_INFO_PROD_NUM) { + dev_err(&client->dev, "Unrecognized product number: 0x%02X\n", + ver_info.prod_num); + return -EINVAL; + } + + error = iqs626_parse_prop(iqs626); + if (error) + return error; + + error = iqs626_input_init(iqs626); + if (error) + return error; + + error = devm_request_threaded_irq(&client->dev, client->irq, + NULL, iqs626_irq, IRQF_ONESHOT, + client->name, iqs626); + if (error) { + dev_err(&client->dev, "Failed to request IRQ: %d\n", error); + return error; + } + + if (!wait_for_completion_timeout(&iqs626->ati_done, + msecs_to_jiffies(2000))) { + dev_err(&client->dev, "Failed to complete ATI\n"); + return -ETIMEDOUT; + } + + /* + * The keypad may include one or more switches and is not registered + * until ATI is complete and the initial switch states are read. + */ + error = input_register_device(iqs626->keypad); + if (error) + dev_err(&client->dev, "Failed to register keypad: %d\n", error); + + return error; +} + +static int __maybe_unused iqs626_suspend(struct device *dev) +{ + struct iqs626_private *iqs626 = dev_get_drvdata(dev); + struct i2c_client *client = iqs626->client; + unsigned int val; + int error; + + if (!iqs626->suspend_mode) + return 0; + + disable_irq(client->irq); + + /* + * Automatic power mode switching must be disabled before the device is + * forced into any particular power mode. In this case, the device will + * transition into normal-power mode. + */ + error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS, + IQS626_SYS_SETTINGS_DIS_AUTO, ~0); + if (error) + goto err_irq; + + /* + * The following check ensures the device has completed its transition + * into normal-power mode before a manual mode switch is performed. + */ + error = regmap_read_poll_timeout(iqs626->regmap, IQS626_SYS_FLAGS, val, + !(val & IQS626_SYS_FLAGS_PWR_MODE_MASK), + IQS626_PWR_MODE_POLL_SLEEP_US, + IQS626_PWR_MODE_POLL_TIMEOUT_US); + if (error) + goto err_irq; + + error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS, + IQS626_SYS_SETTINGS_PWR_MODE_MASK, + iqs626->suspend_mode << + IQS626_SYS_SETTINGS_PWR_MODE_SHIFT); + if (error) + goto err_irq; + + /* + * This last check ensures the device has completed its transition into + * the desired power mode to prevent any spurious interrupts from being + * triggered after iqs626_suspend has already returned. + */ + error = regmap_read_poll_timeout(iqs626->regmap, IQS626_SYS_FLAGS, val, + (val & IQS626_SYS_FLAGS_PWR_MODE_MASK) + == (iqs626->suspend_mode << + IQS626_SYS_FLAGS_PWR_MODE_SHIFT), + IQS626_PWR_MODE_POLL_SLEEP_US, + IQS626_PWR_MODE_POLL_TIMEOUT_US); + +err_irq: + iqs626_irq_wait(); + enable_irq(client->irq); + + return error; +} + +static int __maybe_unused iqs626_resume(struct device *dev) +{ + struct iqs626_private *iqs626 = dev_get_drvdata(dev); + struct i2c_client *client = iqs626->client; + unsigned int val; + int error; + + if (!iqs626->suspend_mode) + return 0; + + disable_irq(client->irq); + + error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS, + IQS626_SYS_SETTINGS_PWR_MODE_MASK, 0); + if (error) + goto err_irq; + + /* + * This check ensures the device has returned to normal-power mode + * before automatic power mode switching is re-enabled. + */ + error = regmap_read_poll_timeout(iqs626->regmap, IQS626_SYS_FLAGS, val, + !(val & IQS626_SYS_FLAGS_PWR_MODE_MASK), + IQS626_PWR_MODE_POLL_SLEEP_US, + IQS626_PWR_MODE_POLL_TIMEOUT_US); + if (error) + goto err_irq; + + error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS, + IQS626_SYS_SETTINGS_DIS_AUTO, 0); + if (error) + goto err_irq; + + /* + * This step reports any events that may have been "swallowed" as a + * result of polling PWR_MODE (which automatically acknowledges any + * pending interrupts). + */ + error = iqs626_report(iqs626); + +err_irq: + iqs626_irq_wait(); + enable_irq(client->irq); + + return error; +} + +static SIMPLE_DEV_PM_OPS(iqs626_pm, iqs626_suspend, iqs626_resume); + +static const struct of_device_id iqs626_of_match[] = { + { .compatible = "azoteq,iqs626a" }, + { } +}; +MODULE_DEVICE_TABLE(of, iqs626_of_match); + +static struct i2c_driver iqs626_i2c_driver = { + .driver = { + .name = "iqs626a", + .of_match_table = iqs626_of_match, + .pm = &iqs626_pm, + }, + .probe_new = iqs626_probe, +}; +module_i2c_driver(iqs626_i2c_driver); + +MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>"); +MODULE_DESCRIPTION("Azoteq IQS626A Capacitive Touch Controller"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/max8997_haptic.c b/drivers/input/misc/max8997_haptic.c index 20ff087b8a44..cd5e99ec1d3c 100644 --- a/drivers/input/misc/max8997_haptic.c +++ b/drivers/input/misc/max8997_haptic.c @@ -61,15 +61,10 @@ static int max8997_haptic_set_duty_cycle(struct max8997_haptic *chip) unsigned int duty = chip->pwm_period * chip->level / 100; ret = pwm_config(chip->pwm, duty, chip->pwm_period); } else { - int i; u8 duty_index = 0; - for (i = 0; i <= 64; i++) { - if (chip->level <= i * 100 / 64) { - duty_index = i; - break; - } - } + duty_index = DIV_ROUND_UP(chip->level * 64, 100); + switch (chip->internal_mode_pattern) { case 0: max8997_write_reg(chip->client, diff --git a/drivers/input/mouse/elan_i2c.h b/drivers/input/mouse/elan_i2c.h index e12da5b024b0..dc4a240f4489 100644 --- a/drivers/input/mouse/elan_i2c.h +++ b/drivers/input/mouse/elan_i2c.h @@ -55,6 +55,11 @@ #define ETP_FW_PAGE_SIZE_512 512 #define ETP_FW_SIGNATURE_SIZE 6 +#define ETP_PRODUCT_ID_DELBIN 0x00C2 +#define ETP_PRODUCT_ID_VOXEL 0x00BF +#define ETP_PRODUCT_ID_MAGPIE 0x0120 +#define ETP_PRODUCT_ID_BOBBA 0x0121 + struct i2c_client; struct completion; @@ -73,7 +78,7 @@ struct elan_transport_ops { int (*calibrate_result)(struct i2c_client *client, u8 *val); int (*get_baseline_data)(struct i2c_client *client, - bool max_baseliune, u8 *value); + bool max_baseline, u8 *value); int (*get_version)(struct i2c_client *client, u8 pattern, bool iap, u8 *version); diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index bef73822315d..dad22c1ea6a0 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -46,6 +46,9 @@ #define ETP_FINGER_WIDTH 15 #define ETP_RETRY_COUNT 3 +/* quirks to control the device */ +#define ETP_QUIRK_QUICK_WAKEUP BIT(0) + /* The main device structure */ struct elan_tp_data { struct i2c_client *client; @@ -90,8 +93,38 @@ struct elan_tp_data { bool baseline_ready; u8 clickpad; bool middle_button; + + u32 quirks; /* Various quirks */ }; +static u32 elan_i2c_lookup_quirks(u16 ic_type, u16 product_id) +{ + static const struct { + u16 ic_type; + u16 product_id; + u32 quirks; + } elan_i2c_quirks[] = { + { 0x0D, ETP_PRODUCT_ID_DELBIN, ETP_QUIRK_QUICK_WAKEUP }, + { 0x10, ETP_PRODUCT_ID_VOXEL, ETP_QUIRK_QUICK_WAKEUP }, + { 0x14, ETP_PRODUCT_ID_MAGPIE, ETP_QUIRK_QUICK_WAKEUP }, + { 0x14, ETP_PRODUCT_ID_BOBBA, ETP_QUIRK_QUICK_WAKEUP }, + }; + u32 quirks = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(elan_i2c_quirks); i++) { + if (elan_i2c_quirks[i].ic_type == ic_type && + elan_i2c_quirks[i].product_id == product_id) { + quirks = elan_i2c_quirks[i].quirks; + } + } + + if (ic_type >= 0x0D && product_id >= 0x123) + quirks |= ETP_QUIRK_QUICK_WAKEUP; + + return quirks; +} + static int elan_get_fwinfo(u16 ic_type, u8 iap_version, u16 *validpage_count, u32 *signature_address, u16 *page_size) { @@ -258,16 +291,18 @@ static int elan_check_ASUS_special_fw(struct elan_tp_data *data) return false; } -static int __elan_initialize(struct elan_tp_data *data) +static int __elan_initialize(struct elan_tp_data *data, bool skip_reset) { struct i2c_client *client = data->client; bool woken_up = false; int error; - error = data->ops->initialize(client); - if (error) { - dev_err(&client->dev, "device initialize failed: %d\n", error); - return error; + if (!skip_reset) { + error = data->ops->initialize(client); + if (error) { + dev_err(&client->dev, "device initialize failed: %d\n", error); + return error; + } } error = elan_query_product(data); @@ -311,16 +346,17 @@ static int __elan_initialize(struct elan_tp_data *data) return 0; } -static int elan_initialize(struct elan_tp_data *data) +static int elan_initialize(struct elan_tp_data *data, bool skip_reset) { int repeat = ETP_RETRY_COUNT; int error; do { - error = __elan_initialize(data); + error = __elan_initialize(data, skip_reset); if (!error) return 0; + skip_reset = false; msleep(30); } while (--repeat > 0); @@ -357,6 +393,8 @@ static int elan_query_device_info(struct elan_tp_data *data) if (error) return error; + data->quirks = elan_i2c_lookup_quirks(data->ic_type, data->product_id); + error = elan_get_fwinfo(data->ic_type, data->iap_version, &data->fw_validpage_count, &data->fw_signature_address, @@ -546,7 +584,7 @@ static int elan_update_firmware(struct elan_tp_data *data, data->ops->iap_reset(client); } else { /* Reinitialize TP after fw is updated */ - elan_initialize(data); + elan_initialize(data, false); elan_query_device_info(data); } @@ -1247,7 +1285,7 @@ static int elan_probe(struct i2c_client *client, } /* Initialize the touchpad. */ - error = elan_initialize(data); + error = elan_initialize(data, false); if (error) return error; @@ -1384,7 +1422,7 @@ static int __maybe_unused elan_resume(struct device *dev) goto err; } - error = elan_initialize(data); + error = elan_initialize(data, data->quirks & ETP_QUIRK_QUICK_WAKEUP); if (error) dev_err(dev, "initialize when resuming failed: %d\n", error); diff --git a/drivers/input/serio/apbps2.c b/drivers/input/serio/apbps2.c index 594ac4e6f8ea..974d7bfae0a0 100644 --- a/drivers/input/serio/apbps2.c +++ b/drivers/input/serio/apbps2.c @@ -103,7 +103,6 @@ static int apbps2_open(struct serio *io) { struct apbps2_priv *priv = io->port_data; int limit; - unsigned long tmp; /* clear error flags */ iowrite32be(0, &priv->regs->status); @@ -111,7 +110,7 @@ static int apbps2_open(struct serio *io) /* Clear old data if available (unlikely) */ limit = 1024; while ((ioread32be(&priv->regs->status) & APBPS2_STATUS_DR) && --limit) - tmp = ioread32be(&priv->regs->data); + ioread32be(&priv->regs->data); /* Enable reciever and it's interrupt */ iowrite32be(APBPS2_CTRL_RE | APBPS2_CTRL_RI, &priv->regs->ctrl); diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen.c index 97342e14b4f1..dd18cb917c4d 100644 --- a/drivers/input/touchscreen/of_touchscreen.c +++ b/drivers/input/touchscreen.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Generic DT helper functions for touchscreen devices + * Generic helper functions for touchscreens and other two-dimensional + * pointing devices * * Copyright (c) 2014 Sebastian Reichel <sre@kernel.org> */ @@ -37,7 +38,7 @@ static void touchscreen_set_params(struct input_dev *dev, if (!test_bit(axis, dev->absbit)) { dev_warn(&dev->dev, - "DT specifies parameters but the axis %lu is not set up\n", + "Parameters are specified but the axis %lu is not set up\n", axis); return; } @@ -49,7 +50,7 @@ static void touchscreen_set_params(struct input_dev *dev, } /** - * touchscreen_parse_properties - parse common touchscreen DT properties + * touchscreen_parse_properties - parse common touchscreen properties * @input: input device that should be parsed * @multitouch: specifies whether parsed properties should be applied to * single-touch or multi-touch axes @@ -57,9 +58,9 @@ static void touchscreen_set_params(struct input_dev *dev, * axis swap and invert info for use with touchscreen_report_x_y(); * or %NULL * - * This function parses common DT properties for touchscreens and setups the + * This function parses common properties for touchscreens and sets up the * input device accordingly. The function keeps previously set up default - * values if no value is specified via DT. + * values if no value is specified. */ void touchscreen_parse_properties(struct input_dev *input, bool multitouch, struct touchscreen_properties *prop) @@ -203,4 +204,4 @@ void touchscreen_report_pos(struct input_dev *input, EXPORT_SYMBOL(touchscreen_report_pos); MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("Device-tree helpers functions for touchscreen devices"); +MODULE_DESCRIPTION("Helper functions for touchscreens and other devices"); diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 529614d364fe..ad454cd2855a 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -12,10 +12,6 @@ menuconfig INPUT_TOUCHSCREEN if INPUT_TOUCHSCREEN -config TOUCHSCREEN_PROPERTIES - def_tristate INPUT - depends on INPUT - config TOUCHSCREEN_88PM860X tristate "Marvell 88PM860x touchscreen" depends on MFD_88PM860X @@ -415,6 +411,17 @@ config TOUCHSCREEN_HIDEEP To compile this driver as a module, choose M here : the module will be called hideep_ts. +config TOUCHSCREEN_HYCON_HY46XX + tristate "Hycon hy46xx touchscreen support" + depends on I2C + help + Say Y here if you have a touchscreen using Hycon hy46xx + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called hycon-hy46xx. + config TOUCHSCREEN_ILI210X tristate "Ilitek ILI210X based touchscreen" depends on I2C @@ -430,6 +437,18 @@ config TOUCHSCREEN_ILI210X To compile this driver as a module, choose M here: the module will be called ili210x. +config TOUCHSCREEN_ILITEK + tristate "Ilitek I2C 213X/23XX/25XX/Lego Series Touch ICs" + depends on I2C + help + Say Y here if you have touchscreen with ILITEK touch IC, + it supports 213X/23XX/25XX and other Lego series. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ilitek_ts_i2c. + config TOUCHSCREEN_IPROC tristate "IPROC touch panel driver support" depends on ARCH_BCM_IPROC || COMPILE_TEST @@ -594,6 +613,18 @@ config TOUCHSCREEN_MELFAS_MIP4 To compile this driver as a module, choose M here: the module will be called melfas_mip4. +config TOUCHSCREEN_MSG2638 + tristate "MStar msg2638 touchscreen support" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + help + Say Y here if you have an I2C touchscreen using MStar msg2638. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called msg2638. + config TOUCHSCREEN_MTOUCH tristate "MicroTouch serial touchscreens" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 6233541e9173..7d34100f7f22 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -7,7 +7,6 @@ wm97xx-ts-y := wm97xx-core.o -obj-$(CONFIG_TOUCHSCREEN_PROPERTIES) += of_touchscreen.o obj-$(CONFIG_TOUCHSCREEN_88PM860X) += 88pm860x-ts.o obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o @@ -35,6 +34,7 @@ obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o obj-$(CONFIG_TOUCHSCREEN_EDT_FT5X06) += edt-ft5x06.o obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o +obj-$(CONFIG_TOUCHSCREEN_HYCON_HY46XX) += hycon-hy46xx.o obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o obj-$(CONFIG_TOUCHSCREEN_EKTF2127) += ektf2127.o @@ -47,6 +47,7 @@ obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o +obj-$(CONFIG_TOUCHSCREEN_ILITEK) += ilitek_ts_i2c.o obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.o @@ -59,6 +60,7 @@ obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o obj-$(CONFIG_TOUCHSCREEN_MELFAS_MIP4) += melfas_mip4.o obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o obj-$(CONFIG_TOUCHSCREEN_MMS114) += mms114.o +obj-$(CONFIG_TOUCHSCREEN_MSG2638) += msg2638.o obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o diff --git a/drivers/input/touchscreen/ar1021_i2c.c b/drivers/input/touchscreen/ar1021_i2c.c index c0d5c2413356..dc6a85362a40 100644 --- a/drivers/input/touchscreen/ar1021_i2c.c +++ b/drivers/input/touchscreen/ar1021_i2c.c @@ -125,7 +125,7 @@ static int ar1021_i2c_probe(struct i2c_client *client, error = devm_request_threaded_irq(&client->dev, client->irq, NULL, ar1021_i2c_irq, - IRQF_ONESHOT, + IRQF_ONESHOT | IRQF_NO_AUTOEN, "ar1021_i2c", ar1021); if (error) { dev_err(&client->dev, @@ -133,9 +133,6 @@ static int ar1021_i2c_probe(struct i2c_client *client, return error; } - /* Disable the IRQ, we'll enable it in ar1021_i2c_open() */ - disable_irq(client->irq); - error = input_register_device(ar1021->input); if (error) { dev_err(&client->dev, diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 383a848eb601..05de92c0293b 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -31,6 +31,7 @@ #include <media/v4l2-ioctl.h> #include <media/videobuf2-v4l2.h> #include <media/videobuf2-vmalloc.h> +#include <dt-bindings/input/atmel-maxtouch.h> /* Firmware files */ #define MXT_FW_NAME "maxtouch.fw" @@ -199,6 +200,7 @@ enum t100_type { #define MXT_CRC_TIMEOUT 1000 /* msec */ #define MXT_FW_RESET_TIME 3000 /* msec */ #define MXT_FW_CHG_TIMEOUT 300 /* msec */ +#define MXT_WAKEUP_TIME 25 /* msec */ /* Command to unlock bootloader */ #define MXT_UNLOCK_CMD_MSB 0xaa @@ -312,6 +314,7 @@ struct mxt_data { struct mxt_dbg dbg; struct regulator_bulk_data regulators[2]; struct gpio_desc *reset_gpio; + struct gpio_desc *wake_gpio; bool use_retrigen_workaround; /* Cached parameters from object table */ @@ -342,6 +345,8 @@ struct mxt_data { unsigned int t19_num_keys; enum mxt_suspend_mode suspend_mode; + + u32 wakeup_method; }; struct mxt_vb2_buffer { @@ -621,10 +626,42 @@ static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock) return mxt_bootloader_write(data, buf, sizeof(buf)); } +static bool mxt_wakeup_toggle(struct i2c_client *client, + bool wake_up, bool in_i2c) +{ + struct mxt_data *data = i2c_get_clientdata(client); + + switch (data->wakeup_method) { + case ATMEL_MXT_WAKEUP_I2C_SCL: + if (!in_i2c) + return false; + break; + + case ATMEL_MXT_WAKEUP_GPIO: + if (in_i2c) + return false; + + gpiod_set_value(data->wake_gpio, wake_up); + break; + + default: + return false; + } + + if (wake_up) { + dev_dbg(&client->dev, "waking up controller\n"); + + msleep(MXT_WAKEUP_TIME); + } + + return true; +} + static int __mxt_read_reg(struct i2c_client *client, u16 reg, u16 len, void *val) { struct i2c_msg xfer[2]; + bool retried = false; u8 buf[2]; int ret; @@ -643,9 +680,13 @@ static int __mxt_read_reg(struct i2c_client *client, xfer[1].len = len; xfer[1].buf = val; +retry: ret = i2c_transfer(client->adapter, xfer, 2); if (ret == 2) { ret = 0; + } else if (!retried && mxt_wakeup_toggle(client, true, true)) { + retried = true; + goto retry; } else { if (ret >= 0) ret = -EIO; @@ -659,6 +700,7 @@ static int __mxt_read_reg(struct i2c_client *client, static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len, const void *val) { + bool retried = false; u8 *buf; size_t count; int ret; @@ -672,9 +714,13 @@ static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len, buf[1] = (reg >> 8) & 0xff; memcpy(&buf[2], val, len); +retry: ret = i2c_master_send(client, buf, count); if (ret == count) { ret = 0; + } else if (!retried && mxt_wakeup_toggle(client, true, true)) { + retried = true; + goto retry; } else { if (ret >= 0) ret = -EIO; @@ -2975,6 +3021,8 @@ static const struct attribute_group mxt_attr_group = { static void mxt_start(struct mxt_data *data) { + mxt_wakeup_toggle(data->client, true, false); + switch (data->suspend_mode) { case MXT_SUSPEND_T9_CTRL: mxt_soft_reset(data); @@ -3009,6 +3057,8 @@ static void mxt_stop(struct mxt_data *data) mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP); break; } + + mxt_wakeup_toggle(data->client, false, false); } static int mxt_input_open(struct input_dev *dev) @@ -3155,16 +3205,24 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) return error; } + /* Request the WAKE line as asserted so we go out of sleep */ + data->wake_gpio = devm_gpiod_get_optional(&client->dev, + "wake", GPIOD_OUT_HIGH); + if (IS_ERR(data->wake_gpio)) { + error = PTR_ERR(data->wake_gpio); + dev_err(&client->dev, "Failed to get wake gpio: %d\n", error); + return error; + } + error = devm_request_threaded_irq(&client->dev, client->irq, - NULL, mxt_interrupt, IRQF_ONESHOT, + NULL, mxt_interrupt, + IRQF_ONESHOT | IRQF_NO_AUTOEN, client->name, data); if (error) { dev_err(&client->dev, "Failed to register interrupt\n"); return error; } - disable_irq(client->irq); - error = regulator_bulk_enable(ARRAY_SIZE(data->regulators), data->regulators); if (error) { @@ -3185,6 +3243,25 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) msleep(MXT_RESET_INVALID_CHG); } + /* + * Controllers like mXT1386 have a dedicated WAKE line that could be + * connected to a GPIO or to I2C SCL pin, or permanently asserted low. + * + * This WAKE line is used for waking controller from a deep-sleep and + * it needs to be asserted low for 25 milliseconds before I2C transfers + * could be accepted by controller if it was in a deep-sleep mode. + * Controller will go into sleep automatically after 2 seconds of + * inactivity if WAKE line is deasserted and deep sleep is activated. + * + * If WAKE line is connected to I2C SCL pin, then the first I2C transfer + * will get an instant NAK and transfer needs to be retried after 25ms. + * + * If WAKE line is connected to a GPIO line, the line must be asserted + * 25ms before the host attempts to communicate with the controller. + */ + device_property_read_u32(&client->dev, "atmel,wakeup-method", + &data->wakeup_method); + error = mxt_initialize(data); if (error) goto err_disable_regulators; diff --git a/drivers/input/touchscreen/bu21029_ts.c b/drivers/input/touchscreen/bu21029_ts.c index 341925edb8e6..392950aa7856 100644 --- a/drivers/input/touchscreen/bu21029_ts.c +++ b/drivers/input/touchscreen/bu21029_ts.c @@ -401,10 +401,10 @@ static int bu21029_probe(struct i2c_client *client, input_set_drvdata(in_dev, bu21029); - irq_set_status_flags(client->irq, IRQ_NOAUTOEN); error = devm_request_threaded_irq(&client->dev, client->irq, NULL, bu21029_touch_soft_irq, - IRQF_ONESHOT, DRIVER_NAME, bu21029); + IRQF_ONESHOT | IRQF_NO_AUTOEN, + DRIVER_NAME, bu21029); if (error) { dev_err(&client->dev, "unable to request touch irq: %d\n", error); diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c index 73c854f35f33..106dd4962785 100644 --- a/drivers/input/touchscreen/cyttsp_core.c +++ b/drivers/input/touchscreen/cyttsp_core.c @@ -229,16 +229,21 @@ static int cyttsp_set_sysinfo_regs(struct cyttsp *ts) static void cyttsp_hard_reset(struct cyttsp *ts) { if (ts->reset_gpio) { + /* + * According to the CY8CTMA340 datasheet page 21, the external + * reset pulse width should be >= 1 ms. The datasheet does not + * specify how long we have to wait after reset but a vendor + * tree specifies 5 ms here. + */ gpiod_set_value_cansleep(ts->reset_gpio, 1); - msleep(CY_DELAY_DFLT); + usleep_range(1000, 2000); gpiod_set_value_cansleep(ts->reset_gpio, 0); - msleep(CY_DELAY_DFLT); + usleep_range(5000, 6000); } } static int cyttsp_soft_reset(struct cyttsp *ts) { - unsigned long timeout; int retval; /* wait for interrupt to set ready completion */ @@ -248,12 +253,16 @@ static int cyttsp_soft_reset(struct cyttsp *ts) enable_irq(ts->irq); retval = ttsp_send_command(ts, CY_SOFT_RESET_MODE); - if (retval) + if (retval) { + dev_err(ts->dev, "failed to send soft reset\n"); goto out; + } - timeout = wait_for_completion_timeout(&ts->bl_ready, - msecs_to_jiffies(CY_DELAY_DFLT * CY_DELAY_MAX)); - retval = timeout ? 0 : -EIO; + if (!wait_for_completion_timeout(&ts->bl_ready, + msecs_to_jiffies(CY_DELAY_DFLT * CY_DELAY_MAX))) { + dev_err(ts->dev, "timeout waiting for soft reset\n"); + retval = -EIO; + } out: ts->state = CY_IDLE_STATE; @@ -405,8 +414,10 @@ static int cyttsp_power_on(struct cyttsp *ts) if (GET_BOOTLOADERMODE(ts->bl_data.bl_status) && IS_VALID_APP(ts->bl_data.bl_status)) { error = cyttsp_exit_bl_mode(ts); - if (error) + if (error) { + dev_err(ts->dev, "failed to exit bootloader mode\n"); return error; + } } if (GET_HSTMODE(ts->bl_data.bl_file) != CY_OPERATE_MODE || @@ -629,10 +640,8 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, return ERR_PTR(error); init_completion(&ts->bl_ready); - snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); input_dev->name = "Cypress TTSP TouchScreen"; - input_dev->phys = ts->phys; input_dev->id.bustype = bus_ops->bustype; input_dev->dev.parent = ts->dev; @@ -643,16 +652,20 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X); input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y); + /* One byte for width 0..255 so this is the limit */ + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); + touchscreen_parse_properties(input_dev, true, NULL); - error = input_mt_init_slots(input_dev, CY_MAX_ID, 0); + error = input_mt_init_slots(input_dev, CY_MAX_ID, INPUT_MT_DIRECT); if (error) { dev_err(dev, "Unable to init MT slots.\n"); return ERR_PTR(error); } error = devm_request_threaded_irq(dev, ts->irq, NULL, cyttsp_irq, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT | + IRQF_NO_AUTOEN, "cyttsp", ts); if (error) { dev_err(ts->dev, "failed to request IRQ %d, err: %d\n", @@ -660,8 +673,6 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, return ERR_PTR(error); } - disable_irq(ts->irq); - cyttsp_hard_reset(ts); error = cyttsp_power_on(ts); diff --git a/drivers/input/touchscreen/cyttsp_core.h b/drivers/input/touchscreen/cyttsp_core.h index 8c651336ac12..9bc4fe7e6ac5 100644 --- a/drivers/input/touchscreen/cyttsp_core.h +++ b/drivers/input/touchscreen/cyttsp_core.h @@ -114,7 +114,6 @@ struct cyttsp { struct device *dev; int irq; struct input_dev *input; - char phys[32]; const struct cyttsp_bus_ops *bus_ops; struct cyttsp_bootloader_data bl_data; struct cyttsp_sysinfo_data sysinfo_data; diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index 5f7706febcb0..17540bdb1eaf 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -38,6 +38,7 @@ #include <linux/of.h> #include <linux/gpio/consumer.h> #include <linux/regulator/consumer.h> +#include <linux/uuid.h> #include <asm/unaligned.h> /* Device, Driver information */ @@ -1334,6 +1335,40 @@ static void elants_i2c_power_off(void *_data) } } +#ifdef CONFIG_ACPI +static const struct acpi_device_id i2c_hid_ids[] = { + {"ACPI0C50", 0 }, + {"PNP0C50", 0 }, + { }, +}; + +static const guid_t i2c_hid_guid = + GUID_INIT(0x3CDFF6F7, 0x4267, 0x4555, + 0xAD, 0x05, 0xB3, 0x0A, 0x3D, 0x89, 0x38, 0xDE); + +static bool elants_acpi_is_hid_device(struct device *dev) +{ + acpi_handle handle = ACPI_HANDLE(dev); + union acpi_object *obj; + + if (acpi_match_device_ids(ACPI_COMPANION(dev), i2c_hid_ids)) + return false; + + obj = acpi_evaluate_dsm_typed(handle, &i2c_hid_guid, 1, 1, NULL, ACPI_TYPE_INTEGER); + if (obj) { + ACPI_FREE(obj); + return true; + } + + return false; +} +#else +static bool elants_acpi_is_hid_device(struct device *dev) +{ + return false; +} +#endif + static int elants_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1342,9 +1377,14 @@ static int elants_i2c_probe(struct i2c_client *client, unsigned long irqflags; int error; + /* Don't bind to i2c-hid compatible devices, these are handled by the i2c-hid drv. */ + if (elants_acpi_is_hid_device(&client->dev)) { + dev_warn(&client->dev, "This device appears to be an I2C-HID device, not binding\n"); + return -ENODEV; + } + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { - dev_err(&client->dev, - "%s: i2c check functionality error\n", DEVICE_NAME); + dev_err(&client->dev, "I2C check functionality error\n"); return -ENXIO; } diff --git a/drivers/input/touchscreen/exc3000.c b/drivers/input/touchscreen/exc3000.c index a6597f026980..cbe0dd412912 100644 --- a/drivers/input/touchscreen/exc3000.c +++ b/drivers/input/touchscreen/exc3000.c @@ -25,11 +25,13 @@ #define EXC3000_NUM_SLOTS 10 #define EXC3000_SLOTS_PER_FRAME 5 #define EXC3000_LEN_FRAME 66 +#define EXC3000_LEN_VENDOR_REQUEST 68 #define EXC3000_LEN_POINT 10 #define EXC3000_LEN_MODEL_NAME 16 #define EXC3000_LEN_FW_VERSION 16 +#define EXC3000_VENDOR_EVENT 0x03 #define EXC3000_MT1_EVENT 0x06 #define EXC3000_MT2_EVENT 0x18 @@ -76,9 +78,6 @@ struct exc3000_data { u8 buf[2 * EXC3000_LEN_FRAME]; struct completion wait_event; struct mutex query_lock; - int query_result; - char model[EXC3000_LEN_MODEL_NAME]; - char fw_version[EXC3000_LEN_FW_VERSION]; }; static void exc3000_report_slots(struct input_dev *input, @@ -105,15 +104,16 @@ static void exc3000_timer(struct timer_list *t) input_sync(data->input); } +static inline void exc3000_schedule_timer(struct exc3000_data *data) +{ + mod_timer(&data->timer, jiffies + msecs_to_jiffies(EXC3000_TIMEOUT_MS)); +} + static int exc3000_read_frame(struct exc3000_data *data, u8 *buf) { struct i2c_client *client = data->client; - u8 expected_event = EXC3000_MT1_EVENT; int ret; - if (data->info->max_xy == SZ_16K - 1) - expected_event = EXC3000_MT2_EVENT; - ret = i2c_master_send(client, "'", 2); if (ret < 0) return ret; @@ -131,175 +131,196 @@ static int exc3000_read_frame(struct exc3000_data *data, u8 *buf) if (get_unaligned_le16(buf) != EXC3000_LEN_FRAME) return -EINVAL; - if (buf[2] != expected_event) - return -EINVAL; - return 0; } -static int exc3000_read_data(struct exc3000_data *data, - u8 *buf, int *n_slots) +static int exc3000_handle_mt_event(struct exc3000_data *data) { - int error; - - error = exc3000_read_frame(data, buf); - if (error) - return error; + struct input_dev *input = data->input; + int ret, total_slots; + u8 *buf = data->buf; - *n_slots = buf[3]; - if (!*n_slots || *n_slots > EXC3000_NUM_SLOTS) - return -EINVAL; + total_slots = buf[3]; + if (!total_slots || total_slots > EXC3000_NUM_SLOTS) { + ret = -EINVAL; + goto out_fail; + } - if (*n_slots > EXC3000_SLOTS_PER_FRAME) { + if (total_slots > EXC3000_SLOTS_PER_FRAME) { /* Read 2nd frame to get the rest of the contacts. */ - error = exc3000_read_frame(data, buf + EXC3000_LEN_FRAME); - if (error) - return error; + ret = exc3000_read_frame(data, buf + EXC3000_LEN_FRAME); + if (ret) + goto out_fail; /* 2nd chunk must have number of contacts set to 0. */ - if (buf[EXC3000_LEN_FRAME + 3] != 0) - return -EINVAL; + if (buf[EXC3000_LEN_FRAME + 3] != 0) { + ret = -EINVAL; + goto out_fail; + } } - return 0; -} - -static int exc3000_query_interrupt(struct exc3000_data *data) -{ - u8 *buf = data->buf; - int error; + /* + * We read full state successfully, no contacts will be "stuck". + */ + del_timer_sync(&data->timer); - error = i2c_master_recv(data->client, buf, EXC3000_LEN_FRAME); - if (error < 0) - return error; + while (total_slots > 0) { + int slots = min(total_slots, EXC3000_SLOTS_PER_FRAME); - if (buf[0] != 'B') - return -EPROTO; + exc3000_report_slots(input, &data->prop, buf + 4, slots); + total_slots -= slots; + buf += EXC3000_LEN_FRAME; + } - if (buf[4] == 'E') - strlcpy(data->model, buf + 5, sizeof(data->model)); - else if (buf[4] == 'D') - strlcpy(data->fw_version, buf + 5, sizeof(data->fw_version)); - else - return -EPROTO; + input_mt_sync_frame(input); + input_sync(input); return 0; + +out_fail: + /* Schedule a timer to release "stuck" contacts */ + exc3000_schedule_timer(data); + + return ret; } static irqreturn_t exc3000_interrupt(int irq, void *dev_id) { struct exc3000_data *data = dev_id; - struct input_dev *input = data->input; u8 *buf = data->buf; - int slots, total_slots; - int error; - - if (mutex_is_locked(&data->query_lock)) { - data->query_result = exc3000_query_interrupt(data); - complete(&data->wait_event); - goto out; - } + int ret; - error = exc3000_read_data(data, buf, &total_slots); - if (error) { + ret = exc3000_read_frame(data, buf); + if (ret) { /* Schedule a timer to release "stuck" contacts */ - mod_timer(&data->timer, - jiffies + msecs_to_jiffies(EXC3000_TIMEOUT_MS)); + exc3000_schedule_timer(data); goto out; } - /* - * We read full state successfully, no contacts will be "stuck". - */ - del_timer_sync(&data->timer); + switch (buf[2]) { + case EXC3000_VENDOR_EVENT: + complete(&data->wait_event); + break; - while (total_slots > 0) { - slots = min(total_slots, EXC3000_SLOTS_PER_FRAME); - exc3000_report_slots(input, &data->prop, buf + 4, slots); - total_slots -= slots; - buf += EXC3000_LEN_FRAME; - } + case EXC3000_MT1_EVENT: + case EXC3000_MT2_EVENT: + exc3000_handle_mt_event(data); + break; - input_mt_sync_frame(input); - input_sync(input); + default: + break; + } out: return IRQ_HANDLED; } -static ssize_t fw_version_show(struct device *dev, - struct device_attribute *attr, char *buf) +static int exc3000_vendor_data_request(struct exc3000_data *data, u8 *request, + u8 request_len, u8 *response, int timeout) { - struct i2c_client *client = to_i2c_client(dev); - struct exc3000_data *data = i2c_get_clientdata(client); - static const u8 request[68] = { - 0x67, 0x00, 0x42, 0x00, 0x03, 0x01, 'D', 0x00 - }; - int error; + u8 buf[EXC3000_LEN_VENDOR_REQUEST] = { 0x67, 0x00, 0x42, 0x00, 0x03 }; + int ret; mutex_lock(&data->query_lock); - data->query_result = -ETIMEDOUT; reinit_completion(&data->wait_event); - error = i2c_master_send(client, request, sizeof(request)); - if (error < 0) { - mutex_unlock(&data->query_lock); - return error; + buf[5] = request_len; + memcpy(&buf[6], request, request_len); + + ret = i2c_master_send(data->client, buf, EXC3000_LEN_VENDOR_REQUEST); + if (ret < 0) + goto out_unlock; + + if (response) { + ret = wait_for_completion_timeout(&data->wait_event, + timeout * HZ); + if (ret <= 0) { + ret = -ETIMEDOUT; + goto out_unlock; + } + + if (data->buf[3] >= EXC3000_LEN_FRAME) { + ret = -ENOSPC; + goto out_unlock; + } + + memcpy(response, &data->buf[4], data->buf[3]); + ret = data->buf[3]; } - wait_for_completion_interruptible_timeout(&data->wait_event, 1 * HZ); +out_unlock: mutex_unlock(&data->query_lock); - if (data->query_result < 0) - return data->query_result; - - return sprintf(buf, "%s\n", data->fw_version); + return ret; } -static DEVICE_ATTR_RO(fw_version); -static ssize_t exc3000_get_model(struct exc3000_data *data) +static ssize_t fw_version_show(struct device *dev, + struct device_attribute *attr, char *buf) { - static const u8 request[68] = { - 0x67, 0x00, 0x42, 0x00, 0x03, 0x01, 'E', 0x00 - }; - struct i2c_client *client = data->client; - int error; + struct i2c_client *client = to_i2c_client(dev); + struct exc3000_data *data = i2c_get_clientdata(client); + u8 response[EXC3000_LEN_FRAME]; + int ret; - mutex_lock(&data->query_lock); - data->query_result = -ETIMEDOUT; - reinit_completion(&data->wait_event); + /* query bootloader info */ + ret = exc3000_vendor_data_request(data, + (u8[]){0x39, 0x02}, 2, response, 1); + if (ret < 0) + return ret; - error = i2c_master_send(client, request, sizeof(request)); - if (error < 0) { - mutex_unlock(&data->query_lock); - return error; - } + /* + * If the bootloader version is non-zero then the device is in + * bootloader mode and won't answer a query for the application FW + * version, so we just use the bootloader version info. + */ + if (response[2] || response[3]) + return sprintf(buf, "%d.%d\n", response[2], response[3]); - wait_for_completion_interruptible_timeout(&data->wait_event, 1 * HZ); - mutex_unlock(&data->query_lock); + ret = exc3000_vendor_data_request(data, (u8[]){'D'}, 1, response, 1); + if (ret < 0) + return ret; - return data->query_result; + return sprintf(buf, "%s\n", &response[1]); } +static DEVICE_ATTR_RO(fw_version); static ssize_t model_show(struct device *dev, struct device_attribute *attr, char *buf) { struct i2c_client *client = to_i2c_client(dev); struct exc3000_data *data = i2c_get_clientdata(client); - int error; + u8 response[EXC3000_LEN_FRAME]; + int ret; - error = exc3000_get_model(data); - if (error < 0) - return error; + ret = exc3000_vendor_data_request(data, (u8[]){'E'}, 1, response, 1); + if (ret < 0) + return ret; - return sprintf(buf, "%s\n", data->model); + return sprintf(buf, "%s\n", &response[1]); } static DEVICE_ATTR_RO(model); +static ssize_t type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct exc3000_data *data = i2c_get_clientdata(client); + u8 response[EXC3000_LEN_FRAME]; + int ret; + + ret = exc3000_vendor_data_request(data, (u8[]){'F'}, 1, response, 1); + if (ret < 0) + return ret; + + return sprintf(buf, "%s\n", &response[1]); +} +static DEVICE_ATTR_RO(type); + static struct attribute *sysfs_attrs[] = { &dev_attr_fw_version.attr, &dev_attr_model.attr, + &dev_attr_type.attr, NULL }; @@ -379,9 +400,15 @@ static int exc3000_probe(struct i2c_client *client) * or two touch events anyways). */ for (retry = 0; retry < 3; retry++) { - error = exc3000_get_model(data); - if (!error) + u8 response[EXC3000_LEN_FRAME]; + + error = exc3000_vendor_data_request(data, (u8[]){'E'}, 1, + response, 1); + if (error > 0) { + dev_dbg(&client->dev, "TS Model: %s", &response[1]); + error = 0; break; + } dev_warn(&client->dev, "Retry %d get EETI EXC3000 model: %d\n", retry + 1, error); } @@ -389,8 +416,6 @@ static int exc3000_probe(struct i2c_client *client) if (error) return error; - dev_dbg(&client->dev, "TS Model: %s", data->model); - i2c_set_clientdata(client, data); error = devm_device_add_group(&client->dev, &exc3000_attribute_group); diff --git a/drivers/input/touchscreen/hycon-hy46xx.c b/drivers/input/touchscreen/hycon-hy46xx.c new file mode 100644 index 000000000000..891d0430083e --- /dev/null +++ b/drivers/input/touchscreen/hycon-hy46xx.c @@ -0,0 +1,591 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/input/touchscreen.h> +#include <linux/irq.h> +#include <linux/regulator/consumer.h> +#include <linux/regmap.h> + +#include <asm/unaligned.h> + +#define HY46XX_CHKSUM_CODE 0x1 +#define HY46XX_FINGER_NUM 0x2 +#define HY46XX_CHKSUM_LEN 0x7 +#define HY46XX_THRESHOLD 0x80 +#define HY46XX_GLOVE_EN 0x84 +#define HY46XX_REPORT_SPEED 0x88 +#define HY46XX_PWR_NOISE_EN 0x89 +#define HY46XX_FILTER_DATA 0x8A +#define HY46XX_GAIN 0x92 +#define HY46XX_EDGE_OFFSET 0x93 +#define HY46XX_RX_NR_USED 0x94 +#define HY46XX_TX_NR_USED 0x95 +#define HY46XX_PWR_MODE 0xA5 +#define HY46XX_FW_VERSION 0xA6 +#define HY46XX_LIB_VERSION 0xA7 +#define HY46XX_TP_INFO 0xA8 +#define HY46XX_TP_CHIP_ID 0xA9 +#define HY46XX_BOOT_VER 0xB0 + +#define HY46XX_TPLEN 0x6 +#define HY46XX_REPORT_PKT_LEN 0x44 + +#define HY46XX_MAX_SUPPORTED_POINTS 11 + +#define TOUCH_EVENT_DOWN 0x00 +#define TOUCH_EVENT_UP 0x01 +#define TOUCH_EVENT_CONTACT 0x02 +#define TOUCH_EVENT_RESERVED 0x03 + +struct hycon_hy46xx_data { + struct i2c_client *client; + struct input_dev *input; + struct touchscreen_properties prop; + struct regulator *vcc; + + struct gpio_desc *reset_gpio; + + struct mutex mutex; + struct regmap *regmap; + + int threshold; + bool glove_enable; + int report_speed; + bool noise_filter_enable; + int filter_data; + int gain; + int edge_offset; + int rx_number_used; + int tx_number_used; + int power_mode; + int fw_version; + int lib_version; + int tp_information; + int tp_chip_id; + int bootloader_version; +}; + +static const struct regmap_config hycon_hy46xx_i2c_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static bool hycon_hy46xx_check_checksum(struct hycon_hy46xx_data *tsdata, u8 *buf) +{ + u8 chksum = 0; + int i; + + for (i = 2; i < buf[HY46XX_CHKSUM_LEN]; i++) + chksum += buf[i]; + + if (chksum == buf[HY46XX_CHKSUM_CODE]) + return true; + + dev_err_ratelimited(&tsdata->client->dev, + "checksum error: 0x%02x expected, got 0x%02x\n", + chksum, buf[HY46XX_CHKSUM_CODE]); + + return false; +} + +static irqreturn_t hycon_hy46xx_isr(int irq, void *dev_id) +{ + struct hycon_hy46xx_data *tsdata = dev_id; + struct device *dev = &tsdata->client->dev; + u8 rdbuf[HY46XX_REPORT_PKT_LEN]; + int i, x, y, id; + int error; + + memset(rdbuf, 0, sizeof(rdbuf)); + + error = regmap_bulk_read(tsdata->regmap, 0, rdbuf, sizeof(rdbuf)); + if (error) { + dev_err_ratelimited(dev, "Unable to fetch data, error: %d\n", + error); + goto out; + } + + if (!hycon_hy46xx_check_checksum(tsdata, rdbuf)) + goto out; + + for (i = 0; i < HY46XX_MAX_SUPPORTED_POINTS; i++) { + u8 *buf = &rdbuf[3 + (HY46XX_TPLEN * i)]; + int type = buf[0] >> 6; + + if (type == TOUCH_EVENT_RESERVED) + continue; + + x = get_unaligned_be16(buf) & 0x0fff; + y = get_unaligned_be16(buf + 2) & 0x0fff; + + id = buf[2] >> 4; + + input_mt_slot(tsdata->input, id); + if (input_mt_report_slot_state(tsdata->input, MT_TOOL_FINGER, + type != TOUCH_EVENT_UP)) + touchscreen_report_pos(tsdata->input, &tsdata->prop, + x, y, true); + } + + input_mt_report_pointer_emulation(tsdata->input, false); + input_sync(tsdata->input); + +out: + return IRQ_HANDLED; +} + +struct hycon_hy46xx_attribute { + struct device_attribute dattr; + size_t field_offset; + u8 address; + u8 limit_low; + u8 limit_high; +}; + +#define HYCON_ATTR_U8(_field, _mode, _address, _limit_low, _limit_high) \ + struct hycon_hy46xx_attribute hycon_hy46xx_attr_##_field = { \ + .dattr = __ATTR(_field, _mode, \ + hycon_hy46xx_setting_show, \ + hycon_hy46xx_setting_store), \ + .field_offset = offsetof(struct hycon_hy46xx_data, _field), \ + .address = _address, \ + .limit_low = _limit_low, \ + .limit_high = _limit_high, \ + } + +#define HYCON_ATTR_BOOL(_field, _mode, _address) \ + struct hycon_hy46xx_attribute hycon_hy46xx_attr_##_field = { \ + .dattr = __ATTR(_field, _mode, \ + hycon_hy46xx_setting_show, \ + hycon_hy46xx_setting_store), \ + .field_offset = offsetof(struct hycon_hy46xx_data, _field), \ + .address = _address, \ + .limit_low = false, \ + .limit_high = true, \ + } + +static ssize_t hycon_hy46xx_setting_show(struct device *dev, + struct device_attribute *dattr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct hycon_hy46xx_data *tsdata = i2c_get_clientdata(client); + struct hycon_hy46xx_attribute *attr = + container_of(dattr, struct hycon_hy46xx_attribute, dattr); + u8 *field = (u8 *)tsdata + attr->field_offset; + size_t count = 0; + int error = 0; + int val; + + mutex_lock(&tsdata->mutex); + + error = regmap_read(tsdata->regmap, attr->address, &val); + if (error < 0) { + dev_err(&tsdata->client->dev, + "Failed to fetch attribute %s, error %d\n", + dattr->attr.name, error); + goto out; + } + + if (val != *field) { + dev_warn(&tsdata->client->dev, + "%s: read (%d) and stored value (%d) differ\n", + dattr->attr.name, val, *field); + *field = val; + } + + count = scnprintf(buf, PAGE_SIZE, "%d\n", val); + +out: + mutex_unlock(&tsdata->mutex); + return error ?: count; +} + +static ssize_t hycon_hy46xx_setting_store(struct device *dev, + struct device_attribute *dattr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct hycon_hy46xx_data *tsdata = i2c_get_clientdata(client); + struct hycon_hy46xx_attribute *attr = + container_of(dattr, struct hycon_hy46xx_attribute, dattr); + u8 *field = (u8 *)tsdata + attr->field_offset; + unsigned int val; + int error; + + mutex_lock(&tsdata->mutex); + + error = kstrtouint(buf, 0, &val); + if (error) + goto out; + + if (val < attr->limit_low || val > attr->limit_high) { + error = -ERANGE; + goto out; + } + + error = regmap_write(tsdata->regmap, attr->address, val); + if (error < 0) { + dev_err(&tsdata->client->dev, + "Failed to update attribute %s, error: %d\n", + dattr->attr.name, error); + goto out; + } + *field = val; + +out: + mutex_unlock(&tsdata->mutex); + return error ?: count; +} + +static HYCON_ATTR_U8(threshold, 0644, HY46XX_THRESHOLD, 0, 255); +static HYCON_ATTR_BOOL(glove_enable, 0644, HY46XX_GLOVE_EN); +static HYCON_ATTR_U8(report_speed, 0644, HY46XX_REPORT_SPEED, 0, 255); +static HYCON_ATTR_BOOL(noise_filter_enable, 0644, HY46XX_PWR_NOISE_EN); +static HYCON_ATTR_U8(filter_data, 0644, HY46XX_FILTER_DATA, 0, 5); +static HYCON_ATTR_U8(gain, 0644, HY46XX_GAIN, 0, 5); +static HYCON_ATTR_U8(edge_offset, 0644, HY46XX_EDGE_OFFSET, 0, 5); +static HYCON_ATTR_U8(fw_version, 0444, HY46XX_FW_VERSION, 0, 255); +static HYCON_ATTR_U8(lib_version, 0444, HY46XX_LIB_VERSION, 0, 255); +static HYCON_ATTR_U8(tp_information, 0444, HY46XX_TP_INFO, 0, 255); +static HYCON_ATTR_U8(tp_chip_id, 0444, HY46XX_TP_CHIP_ID, 0, 255); +static HYCON_ATTR_U8(bootloader_version, 0444, HY46XX_BOOT_VER, 0, 255); + +static struct attribute *hycon_hy46xx_attrs[] = { + &hycon_hy46xx_attr_threshold.dattr.attr, + &hycon_hy46xx_attr_glove_enable.dattr.attr, + &hycon_hy46xx_attr_report_speed.dattr.attr, + &hycon_hy46xx_attr_noise_filter_enable.dattr.attr, + &hycon_hy46xx_attr_filter_data.dattr.attr, + &hycon_hy46xx_attr_gain.dattr.attr, + &hycon_hy46xx_attr_edge_offset.dattr.attr, + &hycon_hy46xx_attr_fw_version.dattr.attr, + &hycon_hy46xx_attr_lib_version.dattr.attr, + &hycon_hy46xx_attr_tp_information.dattr.attr, + &hycon_hy46xx_attr_tp_chip_id.dattr.attr, + &hycon_hy46xx_attr_bootloader_version.dattr.attr, + NULL +}; + +static const struct attribute_group hycon_hy46xx_attr_group = { + .attrs = hycon_hy46xx_attrs, +}; + +static void hycon_hy46xx_get_defaults(struct device *dev, struct hycon_hy46xx_data *tsdata) +{ + bool val_bool; + int error; + u32 val; + + error = device_property_read_u32(dev, "hycon,threshold", &val); + if (!error) { + error = regmap_write(tsdata->regmap, HY46XX_THRESHOLD, val); + if (error < 0) + goto out; + + tsdata->threshold = val; + } + + val_bool = device_property_read_bool(dev, "hycon,glove-enable"); + error = regmap_write(tsdata->regmap, HY46XX_GLOVE_EN, val_bool); + if (error < 0) + goto out; + tsdata->glove_enable = val_bool; + + error = device_property_read_u32(dev, "hycon,report-speed-hz", &val); + if (!error) { + error = regmap_write(tsdata->regmap, HY46XX_REPORT_SPEED, val); + if (error < 0) + goto out; + + tsdata->report_speed = val; + } + + val_bool = device_property_read_bool(dev, "hycon,noise-filter-enable"); + error = regmap_write(tsdata->regmap, HY46XX_PWR_NOISE_EN, val_bool); + if (error < 0) + goto out; + tsdata->noise_filter_enable = val_bool; + + error = device_property_read_u32(dev, "hycon,filter-data", &val); + if (!error) { + error = regmap_write(tsdata->regmap, HY46XX_FILTER_DATA, val); + if (error < 0) + goto out; + + tsdata->filter_data = val; + } + + error = device_property_read_u32(dev, "hycon,gain", &val); + if (!error) { + error = regmap_write(tsdata->regmap, HY46XX_GAIN, val); + if (error < 0) + goto out; + + tsdata->gain = val; + } + + error = device_property_read_u32(dev, "hycon,edge-offset", &val); + if (!error) { + error = regmap_write(tsdata->regmap, HY46XX_EDGE_OFFSET, val); + if (error < 0) + goto out; + + tsdata->edge_offset = val; + } + + return; +out: + dev_err(&tsdata->client->dev, "Failed to set default settings"); +} + +static void hycon_hy46xx_get_parameters(struct hycon_hy46xx_data *tsdata) +{ + int error; + u32 val; + + error = regmap_read(tsdata->regmap, HY46XX_THRESHOLD, &val); + if (error < 0) + goto out; + tsdata->threshold = val; + + error = regmap_read(tsdata->regmap, HY46XX_GLOVE_EN, &val); + if (error < 0) + goto out; + tsdata->glove_enable = val; + + error = regmap_read(tsdata->regmap, HY46XX_REPORT_SPEED, &val); + if (error < 0) + goto out; + tsdata->report_speed = val; + + error = regmap_read(tsdata->regmap, HY46XX_PWR_NOISE_EN, &val); + if (error < 0) + goto out; + tsdata->noise_filter_enable = val; + + error = regmap_read(tsdata->regmap, HY46XX_FILTER_DATA, &val); + if (error < 0) + goto out; + tsdata->filter_data = val; + + error = regmap_read(tsdata->regmap, HY46XX_GAIN, &val); + if (error < 0) + goto out; + tsdata->gain = val; + + error = regmap_read(tsdata->regmap, HY46XX_EDGE_OFFSET, &val); + if (error < 0) + goto out; + tsdata->edge_offset = val; + + error = regmap_read(tsdata->regmap, HY46XX_RX_NR_USED, &val); + if (error < 0) + goto out; + tsdata->rx_number_used = val; + + error = regmap_read(tsdata->regmap, HY46XX_TX_NR_USED, &val); + if (error < 0) + goto out; + tsdata->tx_number_used = val; + + error = regmap_read(tsdata->regmap, HY46XX_PWR_MODE, &val); + if (error < 0) + goto out; + tsdata->power_mode = val; + + error = regmap_read(tsdata->regmap, HY46XX_FW_VERSION, &val); + if (error < 0) + goto out; + tsdata->fw_version = val; + + error = regmap_read(tsdata->regmap, HY46XX_LIB_VERSION, &val); + if (error < 0) + goto out; + tsdata->lib_version = val; + + error = regmap_read(tsdata->regmap, HY46XX_TP_INFO, &val); + if (error < 0) + goto out; + tsdata->tp_information = val; + + error = regmap_read(tsdata->regmap, HY46XX_TP_CHIP_ID, &val); + if (error < 0) + goto out; + tsdata->tp_chip_id = val; + + error = regmap_read(tsdata->regmap, HY46XX_BOOT_VER, &val); + if (error < 0) + goto out; + tsdata->bootloader_version = val; + + return; +out: + dev_err(&tsdata->client->dev, "Failed to read default settings"); +} + +static void hycon_hy46xx_disable_regulator(void *arg) +{ + struct hycon_hy46xx_data *data = arg; + + regulator_disable(data->vcc); +} + +static int hycon_hy46xx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct hycon_hy46xx_data *tsdata; + struct input_dev *input; + int error; + + dev_dbg(&client->dev, "probing for HYCON HY46XX I2C\n"); + + tsdata = devm_kzalloc(&client->dev, sizeof(*tsdata), GFP_KERNEL); + if (!tsdata) + return -ENOMEM; + + tsdata->vcc = devm_regulator_get(&client->dev, "vcc"); + if (IS_ERR(tsdata->vcc)) { + error = PTR_ERR(tsdata->vcc); + if (error != -EPROBE_DEFER) + dev_err(&client->dev, + "failed to request regulator: %d\n", error); + return error; + } + + error = regulator_enable(tsdata->vcc); + if (error < 0) { + dev_err(&client->dev, "failed to enable vcc: %d\n", error); + return error; + } + + error = devm_add_action_or_reset(&client->dev, + hycon_hy46xx_disable_regulator, + tsdata); + if (error) + return error; + + tsdata->reset_gpio = devm_gpiod_get_optional(&client->dev, + "reset", GPIOD_OUT_LOW); + if (IS_ERR(tsdata->reset_gpio)) { + error = PTR_ERR(tsdata->reset_gpio); + dev_err(&client->dev, + "Failed to request GPIO reset pin, error %d\n", error); + return error; + } + + if (tsdata->reset_gpio) { + usleep_range(5000, 6000); + gpiod_set_value_cansleep(tsdata->reset_gpio, 1); + usleep_range(5000, 6000); + gpiod_set_value_cansleep(tsdata->reset_gpio, 0); + msleep(1000); + } + + input = devm_input_allocate_device(&client->dev); + if (!input) { + dev_err(&client->dev, "failed to allocate input device.\n"); + return -ENOMEM; + } + + mutex_init(&tsdata->mutex); + tsdata->client = client; + tsdata->input = input; + + tsdata->regmap = devm_regmap_init_i2c(client, + &hycon_hy46xx_i2c_regmap_config); + if (IS_ERR(tsdata->regmap)) { + dev_err(&client->dev, "regmap allocation failed\n"); + return PTR_ERR(tsdata->regmap); + } + + hycon_hy46xx_get_defaults(&client->dev, tsdata); + hycon_hy46xx_get_parameters(tsdata); + + input->name = "Hycon Capacitive Touch"; + input->id.bustype = BUS_I2C; + input->dev.parent = &client->dev; + + input_set_abs_params(input, ABS_MT_POSITION_X, 0, -1, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, -1, 0, 0); + + touchscreen_parse_properties(input, true, &tsdata->prop); + + error = input_mt_init_slots(input, HY46XX_MAX_SUPPORTED_POINTS, + INPUT_MT_DIRECT); + if (error) { + dev_err(&client->dev, "Unable to init MT slots.\n"); + return error; + } + + i2c_set_clientdata(client, tsdata); + + error = devm_request_threaded_irq(&client->dev, client->irq, + NULL, hycon_hy46xx_isr, IRQF_ONESHOT, + client->name, tsdata); + if (error) { + dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); + return error; + } + + error = devm_device_add_group(&client->dev, &hycon_hy46xx_attr_group); + if (error) + return error; + + error = input_register_device(input); + if (error) + return error; + + dev_dbg(&client->dev, + "HYCON HY46XX initialized: IRQ %d, Reset pin %d.\n", + client->irq, + tsdata->reset_gpio ? desc_to_gpio(tsdata->reset_gpio) : -1); + + return 0; +} + +static const struct i2c_device_id hycon_hy46xx_id[] = { + { .name = "hy4613" }, + { .name = "hy4614" }, + { .name = "hy4621" }, + { .name = "hy4623" }, + { .name = "hy4633" }, + { .name = "hy4635" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, hycon_hy46xx_id); + +static const struct of_device_id hycon_hy46xx_of_match[] = { + { .compatible = "hycon,hy4613" }, + { .compatible = "hycon,hy4614" }, + { .compatible = "hycon,hy4621" }, + { .compatible = "hycon,hy4623" }, + { .compatible = "hycon,hy4633" }, + { .compatible = "hycon,hy4635" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, hycon_hy46xx_of_match); + +static struct i2c_driver hycon_hy46xx_driver = { + .driver = { + .name = "hycon_hy46xx", + .of_match_table = hycon_hy46xx_of_match, + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, + .id_table = hycon_hy46xx_id, + .probe = hycon_hy46xx_probe, +}; + +module_i2c_driver(hycon_hy46xx_driver); + +MODULE_AUTHOR("Giulio Benetti <giulio.benetti@benettiengineering.com>"); +MODULE_DESCRIPTION("HYCON HY46XX I2C Touchscreen Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c index d8fccf048bf4..30576a5f2f04 100644 --- a/drivers/input/touchscreen/ili210x.c +++ b/drivers/input/touchscreen/ili210x.c @@ -87,7 +87,7 @@ static bool ili210x_touchdata_to_coords(const u8 *touchdata, unsigned int *x, unsigned int *y, unsigned int *z) { - if (touchdata[0] & BIT(finger)) + if (!(touchdata[0] & BIT(finger))) return false; *x = get_unaligned_be16(touchdata + 1 + (finger * 4) + 0); diff --git a/drivers/input/touchscreen/ilitek_ts_i2c.c b/drivers/input/touchscreen/ilitek_ts_i2c.c new file mode 100644 index 000000000000..c5d259c76adc --- /dev/null +++ b/drivers/input/touchscreen/ilitek_ts_i2c.c @@ -0,0 +1,690 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ILITEK Touch IC driver for 23XX, 25XX and Lego series + * + * Copyright (C) 2011 ILI Technology Corporation. + * Copyright (C) 2020 Luca Hsu <luca_hsu@ilitek.com> + * Copyright (C) 2021 Joe Hung <joe_hung@ilitek.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/errno.h> +#include <linux/acpi.h> +#include <linux/input/touchscreen.h> +#include <asm/unaligned.h> + + +#define ILITEK_TS_NAME "ilitek_ts" +#define BL_V1_8 0x108 +#define BL_V1_7 0x107 +#define BL_V1_6 0x106 + +#define ILITEK_TP_CMD_GET_TP_RES 0x20 +#define ILITEK_TP_CMD_GET_SCRN_RES 0x21 +#define ILITEK_TP_CMD_SET_IC_SLEEP 0x30 +#define ILITEK_TP_CMD_SET_IC_WAKE 0x31 +#define ILITEK_TP_CMD_GET_FW_VER 0x40 +#define ILITEK_TP_CMD_GET_PRL_VER 0x42 +#define ILITEK_TP_CMD_GET_MCU_VER 0x61 +#define ILITEK_TP_CMD_GET_IC_MODE 0xC0 + +#define REPORT_COUNT_ADDRESS 61 +#define ILITEK_SUPPORT_MAX_POINT 40 + +struct ilitek_protocol_info { + u16 ver; + u8 ver_major; +}; + +struct ilitek_ts_data { + struct i2c_client *client; + struct gpio_desc *reset_gpio; + struct input_dev *input_dev; + struct touchscreen_properties prop; + + const struct ilitek_protocol_map *ptl_cb_func; + struct ilitek_protocol_info ptl; + + char product_id[30]; + u16 mcu_ver; + u8 ic_mode; + u8 firmware_ver[8]; + + s32 reset_time; + s32 screen_max_x; + s32 screen_max_y; + s32 screen_min_x; + s32 screen_min_y; + s32 max_tp; +}; + +struct ilitek_protocol_map { + u16 cmd; + const char *name; + int (*func)(struct ilitek_ts_data *ts, u16 cmd, u8 *inbuf, u8 *outbuf); +}; + +enum ilitek_cmds { + /* common cmds */ + GET_PTL_VER = 0, + GET_FW_VER, + GET_SCRN_RES, + GET_TP_RES, + GET_IC_MODE, + GET_MCU_VER, + SET_IC_SLEEP, + SET_IC_WAKE, + + /* ALWAYS keep at the end */ + MAX_CMD_CNT +}; + +/* ILITEK I2C R/W APIs */ +static int ilitek_i2c_write_and_read(struct ilitek_ts_data *ts, + u8 *cmd, int write_len, int delay, + u8 *data, int read_len) +{ + int error; + struct i2c_client *client = ts->client; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0, + .len = write_len, + .buf = cmd, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = read_len, + .buf = data, + }, + }; + + if (delay == 0 && write_len > 0 && read_len > 0) { + error = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (error < 0) + return error; + } else { + if (write_len > 0) { + error = i2c_transfer(client->adapter, msgs, 1); + if (error < 0) + return error; + } + if (delay > 0) + mdelay(delay); + + if (read_len > 0) { + error = i2c_transfer(client->adapter, msgs + 1, 1); + if (error < 0) + return error; + } + } + + return 0; +} + +/* ILITEK ISR APIs */ +static void ilitek_touch_down(struct ilitek_ts_data *ts, unsigned int id, + unsigned int x, unsigned int y) +{ + struct input_dev *input = ts->input_dev; + + input_mt_slot(input, id); + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); + + touchscreen_report_pos(input, &ts->prop, x, y, true); +} + +static int ilitek_process_and_report_v6(struct ilitek_ts_data *ts) +{ + int error = 0; + u8 buf[512]; + int packet_len = 5; + int packet_max_point = 10; + int report_max_point; + int i, count; + struct input_dev *input = ts->input_dev; + struct device *dev = &ts->client->dev; + unsigned int x, y, status, id; + + error = ilitek_i2c_write_and_read(ts, NULL, 0, 0, buf, 64); + if (error) { + dev_err(dev, "get touch info failed, err:%d\n", error); + goto err_sync_frame; + } + + report_max_point = buf[REPORT_COUNT_ADDRESS]; + if (report_max_point > ts->max_tp) { + dev_err(dev, "FW report max point:%d > panel info. max:%d\n", + report_max_point, ts->max_tp); + error = -EINVAL; + goto err_sync_frame; + } + + count = DIV_ROUND_UP(report_max_point, packet_max_point); + for (i = 1; i < count; i++) { + error = ilitek_i2c_write_and_read(ts, NULL, 0, 0, + buf + i * 64, 64); + if (error) { + dev_err(dev, "get touch info. failed, cnt:%d, err:%d\n", + count, error); + goto err_sync_frame; + } + } + + for (i = 0; i < report_max_point; i++) { + status = buf[i * packet_len + 1] & 0x40; + if (!status) + continue; + + id = buf[i * packet_len + 1] & 0x3F; + + x = get_unaligned_le16(buf + i * packet_len + 2); + y = get_unaligned_le16(buf + i * packet_len + 4); + + if (x > ts->screen_max_x || x < ts->screen_min_x || + y > ts->screen_max_y || y < ts->screen_min_y) { + dev_warn(dev, "invalid position, X[%d,%u,%d], Y[%d,%u,%d]\n", + ts->screen_min_x, x, ts->screen_max_x, + ts->screen_min_y, y, ts->screen_max_y); + continue; + } + + ilitek_touch_down(ts, id, x, y); + } + +err_sync_frame: + input_mt_sync_frame(input); + input_sync(input); + return error; +} + +/* APIs of cmds for ILITEK Touch IC */ +static int api_protocol_set_cmd(struct ilitek_ts_data *ts, + u16 idx, u8 *inbuf, u8 *outbuf) +{ + u16 cmd; + int error; + + if (idx >= MAX_CMD_CNT) + return -EINVAL; + + cmd = ts->ptl_cb_func[idx].cmd; + error = ts->ptl_cb_func[idx].func(ts, cmd, inbuf, outbuf); + if (error) + return error; + + return 0; +} + +static int api_protocol_get_ptl_ver(struct ilitek_ts_data *ts, + u16 cmd, u8 *inbuf, u8 *outbuf) +{ + int error; + u8 buf[64]; + + buf[0] = cmd; + error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 3); + if (error) + return error; + + ts->ptl.ver = get_unaligned_be16(outbuf); + ts->ptl.ver_major = outbuf[0]; + + return 0; +} + +static int api_protocol_get_mcu_ver(struct ilitek_ts_data *ts, + u16 cmd, u8 *inbuf, u8 *outbuf) +{ + int error; + u8 buf[64]; + + buf[0] = cmd; + error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 32); + if (error) + return error; + + ts->mcu_ver = get_unaligned_le16(outbuf); + memset(ts->product_id, 0, sizeof(ts->product_id)); + memcpy(ts->product_id, outbuf + 6, 26); + + return 0; +} + +static int api_protocol_get_fw_ver(struct ilitek_ts_data *ts, + u16 cmd, u8 *inbuf, u8 *outbuf) +{ + int error; + u8 buf[64]; + + buf[0] = cmd; + error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 8); + if (error) + return error; + + memcpy(ts->firmware_ver, outbuf, 8); + + return 0; +} + +static int api_protocol_get_scrn_res(struct ilitek_ts_data *ts, + u16 cmd, u8 *inbuf, u8 *outbuf) +{ + int error; + u8 buf[64]; + + buf[0] = cmd; + error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 8); + if (error) + return error; + + ts->screen_min_x = get_unaligned_le16(outbuf); + ts->screen_min_y = get_unaligned_le16(outbuf + 2); + ts->screen_max_x = get_unaligned_le16(outbuf + 4); + ts->screen_max_y = get_unaligned_le16(outbuf + 6); + + return 0; +} + +static int api_protocol_get_tp_res(struct ilitek_ts_data *ts, + u16 cmd, u8 *inbuf, u8 *outbuf) +{ + int error; + u8 buf[64]; + + buf[0] = cmd; + error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 15); + if (error) + return error; + + ts->max_tp = outbuf[8]; + if (ts->max_tp > ILITEK_SUPPORT_MAX_POINT) { + dev_err(&ts->client->dev, "Invalid MAX_TP:%d from FW\n", + ts->max_tp); + return -EINVAL; + } + + return 0; +} + +static int api_protocol_get_ic_mode(struct ilitek_ts_data *ts, + u16 cmd, u8 *inbuf, u8 *outbuf) +{ + int error; + u8 buf[64]; + + buf[0] = cmd; + error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 2); + if (error) + return error; + + ts->ic_mode = outbuf[0]; + return 0; +} + +static int api_protocol_set_ic_sleep(struct ilitek_ts_data *ts, + u16 cmd, u8 *inbuf, u8 *outbuf) +{ + u8 buf[64]; + + buf[0] = cmd; + return ilitek_i2c_write_and_read(ts, buf, 1, 0, NULL, 0); +} + +static int api_protocol_set_ic_wake(struct ilitek_ts_data *ts, + u16 cmd, u8 *inbuf, u8 *outbuf) +{ + u8 buf[64]; + + buf[0] = cmd; + return ilitek_i2c_write_and_read(ts, buf, 1, 0, NULL, 0); +} + +static const struct ilitek_protocol_map ptl_func_map[] = { + /* common cmds */ + [GET_PTL_VER] = { + ILITEK_TP_CMD_GET_PRL_VER, "GET_PTL_VER", + api_protocol_get_ptl_ver + }, + [GET_FW_VER] = { + ILITEK_TP_CMD_GET_FW_VER, "GET_FW_VER", + api_protocol_get_fw_ver + }, + [GET_SCRN_RES] = { + ILITEK_TP_CMD_GET_SCRN_RES, "GET_SCRN_RES", + api_protocol_get_scrn_res + }, + [GET_TP_RES] = { + ILITEK_TP_CMD_GET_TP_RES, "GET_TP_RES", + api_protocol_get_tp_res + }, + [GET_IC_MODE] = { + ILITEK_TP_CMD_GET_IC_MODE, "GET_IC_MODE", + api_protocol_get_ic_mode + }, + [GET_MCU_VER] = { + ILITEK_TP_CMD_GET_MCU_VER, "GET_MOD_VER", + api_protocol_get_mcu_ver + }, + [SET_IC_SLEEP] = { + ILITEK_TP_CMD_SET_IC_SLEEP, "SET_IC_SLEEP", + api_protocol_set_ic_sleep + }, + [SET_IC_WAKE] = { + ILITEK_TP_CMD_SET_IC_WAKE, "SET_IC_WAKE", + api_protocol_set_ic_wake + }, +}; + +/* Probe APIs */ +static void ilitek_reset(struct ilitek_ts_data *ts, int delay) +{ + if (ts->reset_gpio) { + gpiod_set_value(ts->reset_gpio, 1); + mdelay(10); + gpiod_set_value(ts->reset_gpio, 0); + mdelay(delay); + } +} + +static int ilitek_protocol_init(struct ilitek_ts_data *ts) +{ + int error; + u8 outbuf[64]; + + ts->ptl_cb_func = ptl_func_map; + ts->reset_time = 600; + + error = api_protocol_set_cmd(ts, GET_PTL_VER, NULL, outbuf); + if (error) + return error; + + /* Protocol v3 is not support currently */ + if (ts->ptl.ver_major == 0x3 || + ts->ptl.ver == BL_V1_6 || + ts->ptl.ver == BL_V1_7) + return -EINVAL; + + return 0; +} + +static int ilitek_read_tp_info(struct ilitek_ts_data *ts, bool boot) +{ + u8 outbuf[256]; + int error; + + error = api_protocol_set_cmd(ts, GET_PTL_VER, NULL, outbuf); + if (error) + return error; + + error = api_protocol_set_cmd(ts, GET_MCU_VER, NULL, outbuf); + if (error) + return error; + + error = api_protocol_set_cmd(ts, GET_FW_VER, NULL, outbuf); + if (error) + return error; + + if (boot) { + error = api_protocol_set_cmd(ts, GET_SCRN_RES, NULL, + outbuf); + if (error) + return error; + } + + error = api_protocol_set_cmd(ts, GET_TP_RES, NULL, outbuf); + if (error) + return error; + + error = api_protocol_set_cmd(ts, GET_IC_MODE, NULL, outbuf); + if (error) + return error; + + return 0; +} + +static int ilitek_input_dev_init(struct device *dev, struct ilitek_ts_data *ts) +{ + int error; + struct input_dev *input; + + input = devm_input_allocate_device(dev); + if (!input) + return -ENOMEM; + + ts->input_dev = input; + input->name = ILITEK_TS_NAME; + input->id.bustype = BUS_I2C; + + __set_bit(INPUT_PROP_DIRECT, input->propbit); + + input_set_abs_params(input, ABS_MT_POSITION_X, + ts->screen_min_x, ts->screen_max_x, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, + ts->screen_min_y, ts->screen_max_y, 0, 0); + + touchscreen_parse_properties(input, true, &ts->prop); + + error = input_mt_init_slots(input, ts->max_tp, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) { + dev_err(dev, "initialize MT slots failed, err:%d\n", error); + return error; + } + + error = input_register_device(input); + if (error) { + dev_err(dev, "register input device failed, err:%d\n", error); + return error; + } + + return 0; +} + +static irqreturn_t ilitek_i2c_isr(int irq, void *dev_id) +{ + struct ilitek_ts_data *ts = dev_id; + int error; + + error = ilitek_process_and_report_v6(ts); + if (error < 0) { + dev_err(&ts->client->dev, "[%s] err:%d\n", __func__, error); + return IRQ_NONE; + } + + return IRQ_HANDLED; +} + +static ssize_t firmware_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ilitek_ts_data *ts = i2c_get_clientdata(client); + + return scnprintf(buf, PAGE_SIZE, + "fw version: [%02X%02X.%02X%02X.%02X%02X.%02X%02X]\n", + ts->firmware_ver[0], ts->firmware_ver[1], + ts->firmware_ver[2], ts->firmware_ver[3], + ts->firmware_ver[4], ts->firmware_ver[5], + ts->firmware_ver[6], ts->firmware_ver[7]); +} +static DEVICE_ATTR_RO(firmware_version); + +static ssize_t product_id_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ilitek_ts_data *ts = i2c_get_clientdata(client); + + return scnprintf(buf, PAGE_SIZE, "product id: [%04X], module: [%s]\n", + ts->mcu_ver, ts->product_id); +} +static DEVICE_ATTR_RO(product_id); + +static struct attribute *ilitek_sysfs_attrs[] = { + &dev_attr_firmware_version.attr, + &dev_attr_product_id.attr, + NULL +}; + +static struct attribute_group ilitek_attrs_group = { + .attrs = ilitek_sysfs_attrs, +}; + +static int ilitek_ts_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ilitek_ts_data *ts; + struct device *dev = &client->dev; + int error; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(dev, "i2c check functionality failed\n"); + return -ENXIO; + } + + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + ts->client = client; + i2c_set_clientdata(client, ts); + + ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ts->reset_gpio)) { + error = PTR_ERR(ts->reset_gpio); + dev_err(dev, "request gpiod failed: %d", error); + return error; + } + + ilitek_reset(ts, 1000); + + error = ilitek_protocol_init(ts); + if (error) { + dev_err(dev, "protocol init failed: %d", error); + return error; + } + + error = ilitek_read_tp_info(ts, true); + if (error) { + dev_err(dev, "read tp info failed: %d", error); + return error; + } + + error = ilitek_input_dev_init(dev, ts); + if (error) { + dev_err(dev, "input dev init failed: %d", error); + return error; + } + + error = devm_request_threaded_irq(dev, ts->client->irq, + NULL, ilitek_i2c_isr, IRQF_ONESHOT, + "ilitek_touch_irq", ts); + if (error) { + dev_err(dev, "request threaded irq failed: %d\n", error); + return error; + } + + error = devm_device_add_group(dev, &ilitek_attrs_group); + if (error) { + dev_err(dev, "sysfs create group failed: %d\n", error); + return error; + } + + return 0; +} + +static int __maybe_unused ilitek_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ilitek_ts_data *ts = i2c_get_clientdata(client); + int error; + + disable_irq(client->irq); + + if (!device_may_wakeup(dev)) { + error = api_protocol_set_cmd(ts, SET_IC_SLEEP, NULL, NULL); + if (error) + return error; + } + + return 0; +} + +static int __maybe_unused ilitek_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ilitek_ts_data *ts = i2c_get_clientdata(client); + int error; + + if (!device_may_wakeup(dev)) { + error = api_protocol_set_cmd(ts, SET_IC_WAKE, NULL, NULL); + if (error) + return error; + + ilitek_reset(ts, ts->reset_time); + } + + enable_irq(client->irq); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(ilitek_pm_ops, ilitek_suspend, ilitek_resume); + +static const struct i2c_device_id ilitek_ts_i2c_id[] = { + { ILITEK_TS_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, ilitek_ts_i2c_id); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id ilitekts_acpi_id[] = { + { "ILTK0001", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, ilitekts_acpi_id); +#endif + +#ifdef CONFIG_OF +static const struct of_device_id ilitek_ts_i2c_match[] = { + {.compatible = "ilitek,ili2130",}, + {.compatible = "ilitek,ili2131",}, + {.compatible = "ilitek,ili2132",}, + {.compatible = "ilitek,ili2316",}, + {.compatible = "ilitek,ili2322",}, + {.compatible = "ilitek,ili2323",}, + {.compatible = "ilitek,ili2326",}, + {.compatible = "ilitek,ili2520",}, + {.compatible = "ilitek,ili2521",}, + { }, +}; +MODULE_DEVICE_TABLE(of, ilitek_ts_i2c_match); +#endif + +static struct i2c_driver ilitek_ts_i2c_driver = { + .driver = { + .name = ILITEK_TS_NAME, + .pm = &ilitek_pm_ops, + .of_match_table = of_match_ptr(ilitek_ts_i2c_match), + .acpi_match_table = ACPI_PTR(ilitekts_acpi_id), + }, + .probe = ilitek_ts_i2c_probe, + .id_table = ilitek_ts_i2c_id, +}; +module_i2c_driver(ilitek_ts_i2c_driver); + +MODULE_AUTHOR("ILITEK"); +MODULE_DESCRIPTION("ILITEK I2C Touchscreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/iqs5xx.c b/drivers/input/touchscreen/iqs5xx.c index 54f30038dca4..b3fa71213d60 100644 --- a/drivers/input/touchscreen/iqs5xx.c +++ b/drivers/input/touchscreen/iqs5xx.c @@ -8,7 +8,7 @@ * made available by the vendor. Firmware files may be pushed to the device's * nonvolatile memory by writing the filename to the 'fw_file' sysfs control. * - * Link to PC-based configuration tool and data sheet: http://www.azoteq.com/ + * Link to PC-based configuration tool and datasheet: https://www.azoteq.com/ */ #include <linux/bits.h> @@ -32,14 +32,10 @@ #define IQS5XX_NUM_RETRIES 10 #define IQS5XX_NUM_CONTACTS 5 #define IQS5XX_WR_BYTES_MAX 2 -#define IQS5XX_XY_RES_MAX 0xFFFE #define IQS5XX_PROD_NUM_IQS550 40 #define IQS5XX_PROD_NUM_IQS572 58 #define IQS5XX_PROD_NUM_IQS525 52 -#define IQS5XX_PROJ_NUM_A000 0 -#define IQS5XX_PROJ_NUM_B000 15 -#define IQS5XX_MAJOR_VER_MIN 2 #define IQS5XX_SHOW_RESET BIT(7) #define IQS5XX_ACK_RESET BIT(7) @@ -64,6 +60,7 @@ #define IQS5XX_SYS_CFG1 0x058F #define IQS5XX_X_RES 0x066E #define IQS5XX_Y_RES 0x0670 +#define IQS5XX_EXP_FILE 0x0677 #define IQS5XX_CHKSM 0x83C0 #define IQS5XX_APP 0x8400 #define IQS5XX_CSTM 0xBE00 @@ -87,22 +84,11 @@ #define IQS5XX_BL_CMD_CRC 0x03 #define IQS5XX_BL_BLK_LEN_MAX 64 #define IQS5XX_BL_ID 0x0200 -#define IQS5XX_BL_STATUS_RESET 0x00 -#define IQS5XX_BL_STATUS_AVAIL 0xA5 #define IQS5XX_BL_STATUS_NONE 0xEE #define IQS5XX_BL_CRC_PASS 0x00 #define IQS5XX_BL_CRC_FAIL 0x01 #define IQS5XX_BL_ATTEMPTS 3 -struct iqs5xx_private { - struct i2c_client *client; - struct input_dev *input; - struct gpio_desc *reset_gpio; - struct touchscreen_properties prop; - struct mutex lock; - u8 bl_status; -}; - struct iqs5xx_dev_id_info { __be16 prod_num; __be16 proj_num; @@ -134,6 +120,16 @@ struct iqs5xx_status { struct iqs5xx_touch_data touch_data[IQS5XX_NUM_CONTACTS]; } __packed; +struct iqs5xx_private { + struct i2c_client *client; + struct input_dev *input; + struct gpio_desc *reset_gpio; + struct touchscreen_properties prop; + struct mutex lock; + struct iqs5xx_dev_id_info dev_id_info; + u8 exp_file[2]; +}; + static int iqs5xx_read_burst(struct i2c_client *client, u16 reg, void *val, u16 len) { @@ -446,7 +442,7 @@ static int iqs5xx_set_state(struct i2c_client *client, u8 state) struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client); int error1, error2; - if (iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET) + if (!iqs5xx->dev_id_info.bl_status) return 0; mutex_lock(&iqs5xx->lock); @@ -504,10 +500,6 @@ static int iqs5xx_axis_init(struct i2c_client *client) input->open = iqs5xx_open; input->close = iqs5xx_close; - input_set_capability(input, EV_ABS, ABS_MT_POSITION_X); - input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y); - input_set_capability(input, EV_ABS, ABS_MT_PRESSURE); - input_set_drvdata(input, iqs5xx); iqs5xx->input = input; } @@ -520,26 +512,29 @@ static int iqs5xx_axis_init(struct i2c_client *client) if (error) return error; - input_abs_set_max(iqs5xx->input, ABS_MT_POSITION_X, max_x); - input_abs_set_max(iqs5xx->input, ABS_MT_POSITION_Y, max_y); + input_set_abs_params(iqs5xx->input, ABS_MT_POSITION_X, 0, max_x, 0, 0); + input_set_abs_params(iqs5xx->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0); + input_set_abs_params(iqs5xx->input, ABS_MT_PRESSURE, 0, U16_MAX, 0, 0); touchscreen_parse_properties(iqs5xx->input, true, prop); - if (prop->max_x > IQS5XX_XY_RES_MAX) { - dev_err(&client->dev, "Invalid maximum x-coordinate: %u > %u\n", - prop->max_x, IQS5XX_XY_RES_MAX); + /* + * The device reserves 0xFFFF for coordinates that correspond to slots + * which are not in a state of touch. + */ + if (prop->max_x >= U16_MAX || prop->max_y >= U16_MAX) { + dev_err(&client->dev, "Invalid touchscreen size: %u*%u\n", + prop->max_x, prop->max_y); return -EINVAL; - } else if (prop->max_x != max_x) { + } + + if (prop->max_x != max_x) { error = iqs5xx_write_word(client, IQS5XX_X_RES, prop->max_x); if (error) return error; } - if (prop->max_y > IQS5XX_XY_RES_MAX) { - dev_err(&client->dev, "Invalid maximum y-coordinate: %u > %u\n", - prop->max_y, IQS5XX_XY_RES_MAX); - return -EINVAL; - } else if (prop->max_y != max_y) { + if (prop->max_y != max_y) { error = iqs5xx_write_word(client, IQS5XX_Y_RES, prop->max_y); if (error) return error; @@ -574,7 +569,7 @@ static int iqs5xx_dev_init(struct i2c_client *client) * the missing zero is prepended). */ buf[0] = 0; - dev_id_info = (struct iqs5xx_dev_id_info *)&buf[(buf[1] > 0) ? 0 : 1]; + dev_id_info = (struct iqs5xx_dev_id_info *)&buf[buf[1] ? 0 : 1]; switch (be16_to_cpu(dev_id_info->prod_num)) { case IQS5XX_PROD_NUM_IQS550: @@ -587,35 +582,20 @@ static int iqs5xx_dev_init(struct i2c_client *client) return -EINVAL; } - switch (be16_to_cpu(dev_id_info->proj_num)) { - case IQS5XX_PROJ_NUM_A000: - dev_err(&client->dev, "Unsupported project number: %u\n", - be16_to_cpu(dev_id_info->proj_num)); - return iqs5xx_bl_open(client); - case IQS5XX_PROJ_NUM_B000: - break; - default: - dev_err(&client->dev, "Unrecognized project number: %u\n", - be16_to_cpu(dev_id_info->proj_num)); - return -EINVAL; - } - - if (dev_id_info->major_ver < IQS5XX_MAJOR_VER_MIN) { - dev_err(&client->dev, "Unsupported major version: %u\n", - dev_id_info->major_ver); + /* + * With the product number recognized yet shifted by one byte, open the + * bootloader and wait for user space to convert the A000 device into a + * B000 device via new firmware. + */ + if (buf[1]) { + dev_err(&client->dev, "Opening bootloader for A000 device\n"); return iqs5xx_bl_open(client); } - switch (dev_id_info->bl_status) { - case IQS5XX_BL_STATUS_AVAIL: - case IQS5XX_BL_STATUS_NONE: - break; - default: - dev_err(&client->dev, - "Unrecognized bootloader status: 0x%02X\n", - dev_id_info->bl_status); - return -EINVAL; - } + error = iqs5xx_read_burst(client, IQS5XX_EXP_FILE, + iqs5xx->exp_file, sizeof(iqs5xx->exp_file)); + if (error) + return error; error = iqs5xx_axis_init(client); if (error) @@ -640,7 +620,7 @@ static int iqs5xx_dev_init(struct i2c_client *client) if (error) return error; - iqs5xx->bl_status = dev_id_info->bl_status; + iqs5xx->dev_id_info = *dev_id_info; /* * The following delay allows ATI to complete before the open and close @@ -666,7 +646,7 @@ static irqreturn_t iqs5xx_irq(int irq, void *data) * RDY output during bootloader mode. If the device operates outside of * bootloader mode, the input device is guaranteed to be allocated. */ - if (iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET) + if (!iqs5xx->dev_id_info.bl_status) return IRQ_NONE; error = iqs5xx_read_burst(client, IQS5XX_SYS_INFO0, @@ -852,12 +832,9 @@ static int iqs5xx_fw_file_parse(struct i2c_client *client, static int iqs5xx_fw_file_write(struct i2c_client *client, const char *fw_file) { struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client); - int error, error_bl = 0; + int error, error_init = 0; u8 *pmap; - if (iqs5xx->bl_status == IQS5XX_BL_STATUS_NONE) - return -EPERM; - pmap = kzalloc(IQS5XX_PMAP_LEN, GFP_KERNEL); if (!pmap) return -ENOMEM; @@ -875,7 +852,7 @@ static int iqs5xx_fw_file_write(struct i2c_client *client, const char *fw_file) */ disable_irq(client->irq); - iqs5xx->bl_status = IQS5XX_BL_STATUS_RESET; + iqs5xx->dev_id_info.bl_status = 0; error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_VER, 0); if (error) { @@ -895,21 +872,14 @@ static int iqs5xx_fw_file_write(struct i2c_client *client, const char *fw_file) error = iqs5xx_bl_verify(client, IQS5XX_CSTM, pmap + IQS5XX_CHKSM_LEN + IQS5XX_APP_LEN, IQS5XX_CSTM_LEN); - if (error) - goto err_reset; - - error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_EXEC, 0); err_reset: - if (error) { - iqs5xx_reset(client); - usleep_range(10000, 10100); - } + iqs5xx_reset(client); + usleep_range(15000, 15100); - error_bl = error; - error = iqs5xx_dev_init(client); - if (!error && iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET) - error = -EINVAL; + error_init = iqs5xx_dev_init(client); + if (!iqs5xx->dev_id_info.bl_status) + error_init = error_init ? : -EINVAL; enable_irq(client->irq); @@ -918,10 +888,7 @@ err_reset: err_kfree: kfree(pmap); - if (error_bl) - return error_bl; - - return error; + return error ? : error_init; } static ssize_t fw_file_store(struct device *dev, @@ -968,14 +935,47 @@ static ssize_t fw_file_store(struct device *dev, return count; } +static ssize_t fw_info_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct iqs5xx_private *iqs5xx = dev_get_drvdata(dev); + + if (!iqs5xx->dev_id_info.bl_status) + return -ENODATA; + + return scnprintf(buf, PAGE_SIZE, "%u.%u.%u.%u:%u.%u\n", + be16_to_cpu(iqs5xx->dev_id_info.prod_num), + be16_to_cpu(iqs5xx->dev_id_info.proj_num), + iqs5xx->dev_id_info.major_ver, + iqs5xx->dev_id_info.minor_ver, + iqs5xx->exp_file[0], iqs5xx->exp_file[1]); +} + static DEVICE_ATTR_WO(fw_file); +static DEVICE_ATTR_RO(fw_info); static struct attribute *iqs5xx_attrs[] = { &dev_attr_fw_file.attr, + &dev_attr_fw_info.attr, NULL, }; +static umode_t iqs5xx_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int i) +{ + struct device *dev = kobj_to_dev(kobj); + struct iqs5xx_private *iqs5xx = dev_get_drvdata(dev); + + if (attr == &dev_attr_fw_file.attr && + (iqs5xx->dev_id_info.bl_status == IQS5XX_BL_STATUS_NONE || + !iqs5xx->reset_gpio)) + return 0; + + return attr->mode; +} + static const struct attribute_group iqs5xx_attr_group = { + .is_visible = iqs5xx_attr_is_visible, .attrs = iqs5xx_attrs, }; @@ -1032,8 +1032,8 @@ static int iqs5xx_probe(struct i2c_client *client, i2c_set_clientdata(client, iqs5xx); iqs5xx->client = client; - iqs5xx->reset_gpio = devm_gpiod_get(&client->dev, - "reset", GPIOD_OUT_LOW); + iqs5xx->reset_gpio = devm_gpiod_get_optional(&client->dev, + "reset", GPIOD_OUT_LOW); if (IS_ERR(iqs5xx->reset_gpio)) { error = PTR_ERR(iqs5xx->reset_gpio); dev_err(&client->dev, "Failed to request GPIO: %d\n", error); @@ -1042,9 +1042,6 @@ static int iqs5xx_probe(struct i2c_client *client, mutex_init(&iqs5xx->lock); - iqs5xx_reset(client); - usleep_range(10000, 10100); - error = iqs5xx_dev_init(client); if (error) return error; diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c index b51450b3d943..15b5cb763526 100644 --- a/drivers/input/touchscreen/lpc32xx_ts.c +++ b/drivers/input/touchscreen/lpc32xx_ts.c @@ -34,18 +34,18 @@ #define LPC32XX_TSC_AUX_MIN 0x38 #define LPC32XX_TSC_AUX_MAX 0x3C -#define LPC32XX_TSC_STAT_FIFO_OVRRN (1 << 8) -#define LPC32XX_TSC_STAT_FIFO_EMPTY (1 << 7) +#define LPC32XX_TSC_STAT_FIFO_OVRRN BIT(8) +#define LPC32XX_TSC_STAT_FIFO_EMPTY BIT(7) #define LPC32XX_TSC_SEL_DEFVAL 0x0284 #define LPC32XX_TSC_ADCCON_IRQ_TO_FIFO_4 (0x1 << 11) #define LPC32XX_TSC_ADCCON_X_SAMPLE_SIZE(s) ((10 - (s)) << 7) #define LPC32XX_TSC_ADCCON_Y_SAMPLE_SIZE(s) ((10 - (s)) << 4) -#define LPC32XX_TSC_ADCCON_POWER_UP (1 << 2) -#define LPC32XX_TSC_ADCCON_AUTO_EN (1 << 0) +#define LPC32XX_TSC_ADCCON_POWER_UP BIT(2) +#define LPC32XX_TSC_ADCCON_AUTO_EN BIT(0) -#define LPC32XX_TSC_FIFO_TS_P_LEVEL (1 << 31) +#define LPC32XX_TSC_FIFO_TS_P_LEVEL BIT(31) #define LPC32XX_TSC_FIFO_NORMALIZE_X_VAL(x) (((x) & 0x03FF0000) >> 16) #define LPC32XX_TSC_FIFO_NORMALIZE_Y_VAL(y) ((y) & 0x000003FF) diff --git a/drivers/input/touchscreen/melfas_mip4.c b/drivers/input/touchscreen/melfas_mip4.c index 225796a3f546..2745bf1aee38 100644 --- a/drivers/input/touchscreen/melfas_mip4.c +++ b/drivers/input/touchscreen/melfas_mip4.c @@ -1502,7 +1502,8 @@ static int mip4_probe(struct i2c_client *client, const struct i2c_device_id *id) error = devm_request_threaded_irq(&client->dev, client->irq, NULL, mip4_interrupt, - IRQF_ONESHOT, MIP4_DEVICE_NAME, ts); + IRQF_ONESHOT | IRQF_NO_AUTOEN, + MIP4_DEVICE_NAME, ts); if (error) { dev_err(&client->dev, "Failed to request interrupt %d: %d\n", @@ -1510,8 +1511,6 @@ static int mip4_probe(struct i2c_client *client, const struct i2c_device_id *id) return error; } - disable_irq(client->irq); - error = input_register_device(input); if (error) { dev_err(&client->dev, diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c index 16557f51b09d..0efd1a1bb192 100644 --- a/drivers/input/touchscreen/mms114.c +++ b/drivers/input/touchscreen/mms114.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -// Melfas MMS114/MMS152 touchscreen device driver +// Melfas MMS114/MMS136/MMS152 touchscreen device driver // // Copyright (c) 2012 Samsung Electronics Co., Ltd. // Author: Joonyoung Shim <jy0922.shim@samsung.com> @@ -44,7 +44,8 @@ #define MMS114_MAX_AREA 0xff #define MMS114_MAX_TOUCH 10 -#define MMS114_PACKET_NUM 8 +#define MMS114_EVENT_SIZE 8 +#define MMS136_EVENT_SIZE 6 /* Touch type */ #define MMS114_TYPE_NONE 0 @@ -53,6 +54,7 @@ enum mms_type { TYPE_MMS114 = 114, + TYPE_MMS136 = 136, TYPE_MMS152 = 152, TYPE_MMS345L = 345, }; @@ -209,7 +211,11 @@ static irqreturn_t mms114_interrupt(int irq, void *dev_id) if (packet_size <= 0) goto out; - touch_size = packet_size / MMS114_PACKET_NUM; + /* MMS136 has slightly different event size */ + if (data->type == TYPE_MMS136) + touch_size = packet_size / MMS136_EVENT_SIZE; + else + touch_size = packet_size / MMS114_EVENT_SIZE; error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size, (u8 *)touch); @@ -275,6 +281,7 @@ static int mms114_get_version(struct mms114_data *data) break; case TYPE_MMS114: + case TYPE_MMS136: error = __mms114_read_reg(data, MMS114_TSP_REV, 6, buf); if (error) return error; @@ -297,8 +304,8 @@ static int mms114_setup_regs(struct mms114_data *data) if (error < 0) return error; - /* Only MMS114 has configuration and power on registers */ - if (data->type != TYPE_MMS114) + /* Only MMS114 and MMS136 have configuration and power on registers */ + if (data->type != TYPE_MMS114 && data->type != TYPE_MMS136) return 0; error = mms114_set_active(data, true); @@ -480,7 +487,7 @@ static int mms114_probe(struct i2c_client *client, 0, data->props.max_y, 0, 0); } - if (data->type == TYPE_MMS114) { + if (data->type == TYPE_MMS114 || data->type == TYPE_MMS136) { /* * The firmware handles movement and pressure fuzz, so * don't duplicate that in software. @@ -530,13 +537,13 @@ static int mms114_probe(struct i2c_client *client, } error = devm_request_threaded_irq(&client->dev, client->irq, - NULL, mms114_interrupt, IRQF_ONESHOT, + NULL, mms114_interrupt, + IRQF_ONESHOT | IRQF_NO_AUTOEN, dev_name(&client->dev), data); if (error) { dev_err(&client->dev, "Failed to register interrupt\n"); return error; } - disable_irq(client->irq); error = input_register_device(data->input_dev); if (error) { @@ -605,6 +612,9 @@ static const struct of_device_id mms114_dt_match[] = { .compatible = "melfas,mms114", .data = (void *)TYPE_MMS114, }, { + .compatible = "melfas,mms136", + .data = (void *)TYPE_MMS136, + }, { .compatible = "melfas,mms152", .data = (void *)TYPE_MMS152, }, { diff --git a/drivers/input/touchscreen/msg2638.c b/drivers/input/touchscreen/msg2638.c new file mode 100644 index 000000000000..75536bc88969 --- /dev/null +++ b/drivers/input/touchscreen/msg2638.c @@ -0,0 +1,337 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for MStar msg2638 touchscreens + * + * Copyright (c) 2021 Vincent Knecht <vincent.knecht@mailoo.org> + * + * Checksum and IRQ handler based on mstar_drv_common.c and + * mstar_drv_mutual_fw_control.c + * Copyright (c) 2006-2012 MStar Semiconductor, Inc. + * + * Driver structure based on zinitix.c by Michael Srba <Michael.Srba@seznam.cz> + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/input/touchscreen.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#define MODE_DATA_RAW 0x5A + +#define MAX_SUPPORTED_FINGER_NUM 5 + +#define CHIP_ON_DELAY_MS 15 +#define FIRMWARE_ON_DELAY_MS 50 +#define RESET_DELAY_MIN_US 10000 +#define RESET_DELAY_MAX_US 11000 + +struct packet { + u8 xy_hi; /* higher bits of x and y coordinates */ + u8 x_low; + u8 y_low; + u8 pressure; +}; + +struct touch_event { + u8 mode; + struct packet pkt[MAX_SUPPORTED_FINGER_NUM]; + u8 proximity; + u8 checksum; +}; + +struct msg2638_ts_data { + struct i2c_client *client; + struct input_dev *input_dev; + struct touchscreen_properties prop; + struct regulator_bulk_data supplies[2]; + struct gpio_desc *reset_gpiod; +}; + +static u8 msg2638_checksum(u8 *data, u32 length) +{ + s32 sum = 0; + u32 i; + + for (i = 0; i < length; i++) + sum += data[i]; + + return (u8)((-sum) & 0xFF); +} + +static irqreturn_t msg2638_ts_irq_handler(int irq, void *msg2638_handler) +{ + struct msg2638_ts_data *msg2638 = msg2638_handler; + struct i2c_client *client = msg2638->client; + struct input_dev *input = msg2638->input_dev; + struct touch_event touch_event; + u32 len = sizeof(touch_event); + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = sizeof(touch_event), + .buf = (u8 *)&touch_event, + }, + }; + struct packet *p; + u16 x, y; + int ret; + int i; + + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (ret != ARRAY_SIZE(msg)) { + dev_err(&client->dev, + "Failed I2C transfer in irq handler: %d\n", + ret < 0 ? ret : -EIO); + goto out; + } + + if (touch_event.mode != MODE_DATA_RAW) + goto out; + + if (msg2638_checksum((u8 *)&touch_event, len - 1) != + touch_event.checksum) { + dev_err(&client->dev, "Failed checksum!\n"); + goto out; + } + + for (i = 0; i < MAX_SUPPORTED_FINGER_NUM; i++) { + p = &touch_event.pkt[i]; + + /* Ignore non-pressed finger data */ + if (p->xy_hi == 0xFF && p->x_low == 0xFF && p->y_low == 0xFF) + continue; + + x = (((p->xy_hi & 0xF0) << 4) | p->x_low); + y = (((p->xy_hi & 0x0F) << 8) | p->y_low); + + input_mt_slot(input, i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); + touchscreen_report_pos(input, &msg2638->prop, x, y, true); + } + + input_mt_sync_frame(msg2638->input_dev); + input_sync(msg2638->input_dev); + +out: + return IRQ_HANDLED; +} + +static void msg2638_reset(struct msg2638_ts_data *msg2638) +{ + gpiod_set_value_cansleep(msg2638->reset_gpiod, 1); + usleep_range(RESET_DELAY_MIN_US, RESET_DELAY_MAX_US); + gpiod_set_value_cansleep(msg2638->reset_gpiod, 0); + msleep(FIRMWARE_ON_DELAY_MS); +} + +static int msg2638_start(struct msg2638_ts_data *msg2638) +{ + int error; + + error = regulator_bulk_enable(ARRAY_SIZE(msg2638->supplies), + msg2638->supplies); + if (error) { + dev_err(&msg2638->client->dev, + "Failed to enable regulators: %d\n", error); + return error; + } + + msleep(CHIP_ON_DELAY_MS); + + msg2638_reset(msg2638); + + enable_irq(msg2638->client->irq); + + return 0; +} + +static int msg2638_stop(struct msg2638_ts_data *msg2638) +{ + int error; + + disable_irq(msg2638->client->irq); + + error = regulator_bulk_disable(ARRAY_SIZE(msg2638->supplies), + msg2638->supplies); + if (error) { + dev_err(&msg2638->client->dev, + "Failed to disable regulators: %d\n", error); + return error; + } + + return 0; +} + +static int msg2638_input_open(struct input_dev *dev) +{ + struct msg2638_ts_data *msg2638 = input_get_drvdata(dev); + + return msg2638_start(msg2638); +} + +static void msg2638_input_close(struct input_dev *dev) +{ + struct msg2638_ts_data *msg2638 = input_get_drvdata(dev); + + msg2638_stop(msg2638); +} + +static int msg2638_init_input_dev(struct msg2638_ts_data *msg2638) +{ + struct device *dev = &msg2638->client->dev; + struct input_dev *input_dev; + int error; + + input_dev = devm_input_allocate_device(dev); + if (!input_dev) { + dev_err(dev, "Failed to allocate input device.\n"); + return -ENOMEM; + } + + input_set_drvdata(input_dev, msg2638); + msg2638->input_dev = input_dev; + + input_dev->name = "MStar TouchScreen"; + input_dev->phys = "input/ts"; + input_dev->id.bustype = BUS_I2C; + input_dev->open = msg2638_input_open; + input_dev->close = msg2638_input_close; + + input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X); + input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y); + + touchscreen_parse_properties(input_dev, true, &msg2638->prop); + if (!msg2638->prop.max_x || !msg2638->prop.max_y) { + dev_err(dev, "touchscreen-size-x and/or touchscreen-size-y not set in properties\n"); + return -EINVAL; + } + + error = input_mt_init_slots(input_dev, MAX_SUPPORTED_FINGER_NUM, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) { + dev_err(dev, "Failed to initialize MT slots: %d\n", error); + return error; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(dev, "Failed to register input device: %d\n", error); + return error; + } + + return 0; +} + +static int msg2638_ts_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct msg2638_ts_data *msg2638; + int error; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(dev, "Failed to assert adapter's support for plain I2C.\n"); + return -ENXIO; + } + + msg2638 = devm_kzalloc(dev, sizeof(*msg2638), GFP_KERNEL); + if (!msg2638) + return -ENOMEM; + + msg2638->client = client; + i2c_set_clientdata(client, msg2638); + + msg2638->supplies[0].supply = "vdd"; + msg2638->supplies[1].supply = "vddio"; + error = devm_regulator_bulk_get(dev, ARRAY_SIZE(msg2638->supplies), + msg2638->supplies); + if (error) { + dev_err(dev, "Failed to get regulators: %d\n", error); + return error; + } + + msg2638->reset_gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(msg2638->reset_gpiod)) { + error = PTR_ERR(msg2638->reset_gpiod); + dev_err(dev, "Failed to request reset GPIO: %d\n", error); + return error; + } + + error = msg2638_init_input_dev(msg2638); + if (error) { + dev_err(dev, "Failed to initialize input device: %d\n", error); + return error; + } + + error = devm_request_threaded_irq(dev, client->irq, + NULL, msg2638_ts_irq_handler, + IRQF_ONESHOT | IRQF_NO_AUTOEN, + client->name, msg2638); + if (error) { + dev_err(dev, "Failed to request IRQ: %d\n", error); + return error; + } + + return 0; +} + +static int __maybe_unused msg2638_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct msg2638_ts_data *msg2638 = i2c_get_clientdata(client); + + mutex_lock(&msg2638->input_dev->mutex); + + if (input_device_enabled(msg2638->input_dev)) + msg2638_stop(msg2638); + + mutex_unlock(&msg2638->input_dev->mutex); + + return 0; +} + +static int __maybe_unused msg2638_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct msg2638_ts_data *msg2638 = i2c_get_clientdata(client); + int ret = 0; + + mutex_lock(&msg2638->input_dev->mutex); + + if (input_device_enabled(msg2638->input_dev)) + ret = msg2638_start(msg2638); + + mutex_unlock(&msg2638->input_dev->mutex); + + return ret; +} + +static SIMPLE_DEV_PM_OPS(msg2638_pm_ops, msg2638_suspend, msg2638_resume); + +static const struct of_device_id msg2638_of_match[] = { + { .compatible = "mstar,msg2638" }, + { } +}; +MODULE_DEVICE_TABLE(of, msg2638_of_match); + +static struct i2c_driver msg2638_ts_driver = { + .probe_new = msg2638_ts_probe, + .driver = { + .name = "MStar-TS", + .pm = &msg2638_pm_ops, + .of_match_table = msg2638_of_match, + }, +}; +module_i2c_driver(msg2638_ts_driver); + +MODULE_AUTHOR("Vincent Knecht <vincent.knecht@mailoo.org>"); +MODULE_DESCRIPTION("MStar MSG2638 touchscreen driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index 8fa2f3b7cfd8..1ee760bac0cf 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -20,6 +20,7 @@ #include <linux/input/mt.h> #include <linux/input/touchscreen.h> #include <linux/pm.h> +#include <linux/pm_runtime.h> #include <linux/irq.h> #include <linux/regulator/consumer.h> @@ -335,10 +336,8 @@ static int silead_ts_get_id(struct i2c_client *client) error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_ID, sizeof(chip_id), (u8 *)&chip_id); - if (error < 0) { - dev_err(&client->dev, "Chip ID read error %d\n", error); + if (error < 0) return error; - } data->chip_id = le32_to_cpu(chip_id); dev_info(&client->dev, "Silead chip ID: 0x%8X", data->chip_id); @@ -351,12 +350,49 @@ static int silead_ts_setup(struct i2c_client *client) int error; u32 status; + /* + * Some buggy BIOS-es bring up the chip in a stuck state where it + * blocks the I2C bus. The following steps are necessary to + * unstuck the chip / bus: + * 1. Turn off the Silead chip. + * 2. Try to do an I2C transfer with the chip, this will fail in + * response to which the I2C-bus-driver will call: + * i2c_recover_bus() which will unstuck the I2C-bus. Note the + * unstuck-ing of the I2C bus only works if we first drop the + * chip off the bus by turning it off. + * 3. Turn the chip back on. + * + * On the x86/ACPI systems were this problem is seen, step 1. and + * 3. require making ACPI calls and dealing with ACPI Power + * Resources. The workaround below runtime-suspends the chip to + * turn it off, leaving it up to the ACPI subsystem to deal with + * this. + */ + + if (device_property_read_bool(&client->dev, + "silead,stuck-controller-bug")) { + pm_runtime_set_active(&client->dev); + pm_runtime_enable(&client->dev); + pm_runtime_allow(&client->dev); + + pm_runtime_suspend(&client->dev); + + dev_warn(&client->dev, FW_BUG "Stuck I2C bus: please ignore the next 'controller timed out' error\n"); + silead_ts_get_id(client); + + /* The forbid will also resume the device */ + pm_runtime_forbid(&client->dev); + pm_runtime_disable(&client->dev); + } + silead_ts_set_power(client, SILEAD_POWER_OFF); silead_ts_set_power(client, SILEAD_POWER_ON); error = silead_ts_get_id(client); - if (error) + if (error) { + dev_err(&client->dev, "Chip ID read error %d\n", error); return error; + } error = silead_ts_init(client); if (error) @@ -486,7 +522,7 @@ static int silead_ts_probe(struct i2c_client *client, silead_ts_read_props(client); - /* We must have the IRQ provided by DT or ACPI subsytem */ + /* We must have the IRQ provided by DT or ACPI subsystem */ if (client->irq <= 0) return -ENODEV; diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c index 9a64e1dbc04a..bc11203c9cf7 100644 --- a/drivers/input/touchscreen/stmfts.c +++ b/drivers/input/touchscreen/stmfts.c @@ -691,10 +691,9 @@ static int stmfts_probe(struct i2c_client *client, * interrupts. To be on the safe side it's better to not enable * the interrupts during their request. */ - irq_set_status_flags(client->irq, IRQ_NOAUTOEN); err = devm_request_threaded_irq(&client->dev, client->irq, NULL, stmfts_irq_handler, - IRQF_ONESHOT, + IRQF_ONESHOT | IRQF_NO_AUTOEN, "stmfts_irq", sdata); if (err) return err; diff --git a/drivers/input/touchscreen/tsc2007.h b/drivers/input/touchscreen/tsc2007.h index 91c60bf6dcaf..69b08dd6c8df 100644 --- a/drivers/input/touchscreen/tsc2007.h +++ b/drivers/input/touchscreen/tsc2007.h @@ -19,6 +19,8 @@ #ifndef _TSC2007_H #define _TSC2007_H +struct gpio_desc; + #define TSC2007_MEASURE_TEMP0 (0x0 << 4) #define TSC2007_MEASURE_AUX (0x2 << 4) #define TSC2007_MEASURE_TEMP1 (0x4 << 4) @@ -69,7 +71,7 @@ struct tsc2007 { int fuzzy; int fuzzz; - unsigned int gpio; + struct gpio_desc *gpiod; int irq; wait_queue_head_t wait; diff --git a/drivers/input/touchscreen/tsc2007_core.c b/drivers/input/touchscreen/tsc2007_core.c index 3b80abfc1eca..3e871d182c40 100644 --- a/drivers/input/touchscreen/tsc2007_core.c +++ b/drivers/input/touchscreen/tsc2007_core.c @@ -19,11 +19,12 @@ #include <linux/module.h> #include <linux/slab.h> +#include <linux/gpio/consumer.h> #include <linux/input.h> #include <linux/interrupt.h> #include <linux/i2c.h> -#include <linux/of_device.h> -#include <linux/of_gpio.h> +#include <linux/mod_devicetable.h> +#include <linux/property.h> #include <linux/platform_data/tsc2007.h> #include "tsc2007.h" @@ -220,71 +221,58 @@ static void tsc2007_close(struct input_dev *input_dev) tsc2007_stop(ts); } -#ifdef CONFIG_OF static int tsc2007_get_pendown_state_gpio(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct tsc2007 *ts = i2c_get_clientdata(client); - return !gpio_get_value(ts->gpio); + return gpiod_get_value(ts->gpiod); } -static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts) +static int tsc2007_probe_properties(struct device *dev, struct tsc2007 *ts) { - struct device_node *np = client->dev.of_node; u32 val32; u64 val64; - if (!np) { - dev_err(&client->dev, "missing device tree data\n"); - return -EINVAL; - } - - if (!of_property_read_u32(np, "ti,max-rt", &val32)) + if (!device_property_read_u32(dev, "ti,max-rt", &val32)) ts->max_rt = val32; else ts->max_rt = MAX_12BIT; - if (!of_property_read_u32(np, "ti,fuzzx", &val32)) + if (!device_property_read_u32(dev, "ti,fuzzx", &val32)) ts->fuzzx = val32; - if (!of_property_read_u32(np, "ti,fuzzy", &val32)) + if (!device_property_read_u32(dev, "ti,fuzzy", &val32)) ts->fuzzy = val32; - if (!of_property_read_u32(np, "ti,fuzzz", &val32)) + if (!device_property_read_u32(dev, "ti,fuzzz", &val32)) ts->fuzzz = val32; - if (!of_property_read_u64(np, "ti,poll-period", &val64)) + if (!device_property_read_u64(dev, "ti,poll-period", &val64)) ts->poll_period = msecs_to_jiffies(val64); else ts->poll_period = msecs_to_jiffies(1); - if (!of_property_read_u32(np, "ti,x-plate-ohms", &val32)) { + if (!device_property_read_u32(dev, "ti,x-plate-ohms", &val32)) { ts->x_plate_ohms = val32; } else { - dev_err(&client->dev, "missing ti,x-plate-ohms devicetree property."); + dev_err(dev, "Missing ti,x-plate-ohms device property\n"); return -EINVAL; } - ts->gpio = of_get_gpio(np, 0); - if (gpio_is_valid(ts->gpio)) + ts->gpiod = devm_gpiod_get_optional(dev, NULL, GPIOD_IN); + if (IS_ERR(ts->gpiod)) + return PTR_ERR(ts->gpiod); + + if (ts->gpiod) ts->get_pendown_state = tsc2007_get_pendown_state_gpio; else - dev_warn(&client->dev, - "GPIO not specified in DT (of_get_gpio returned %d)\n", - ts->gpio); + dev_warn(dev, "Pen down GPIO is not specified in properties\n"); return 0; } -#else -static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts) -{ - dev_err(&client->dev, "platform data is required!\n"); - return -EINVAL; -} -#endif -static int tsc2007_probe_pdev(struct i2c_client *client, struct tsc2007 *ts, +static int tsc2007_probe_pdev(struct device *dev, struct tsc2007 *ts, const struct tsc2007_platform_data *pdata, const struct i2c_device_id *id) { @@ -299,7 +287,7 @@ static int tsc2007_probe_pdev(struct i2c_client *client, struct tsc2007 *ts, ts->fuzzz = pdata->fuzzz; if (pdata->x_plate_ohms == 0) { - dev_err(&client->dev, "x_plate_ohms is not set up in platform data"); + dev_err(dev, "x_plate_ohms is not set up in platform data\n"); return -EINVAL; } @@ -332,9 +320,9 @@ static int tsc2007_probe(struct i2c_client *client, return -ENOMEM; if (pdata) - err = tsc2007_probe_pdev(client, ts, pdata, id); + err = tsc2007_probe_pdev(&client->dev, ts, pdata, id); else - err = tsc2007_probe_dt(client, ts); + err = tsc2007_probe_properties(&client->dev, ts); if (err) return err; @@ -431,18 +419,16 @@ static const struct i2c_device_id tsc2007_idtable[] = { MODULE_DEVICE_TABLE(i2c, tsc2007_idtable); -#ifdef CONFIG_OF static const struct of_device_id tsc2007_of_match[] = { { .compatible = "ti,tsc2007" }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, tsc2007_of_match); -#endif static struct i2c_driver tsc2007_driver = { .driver = { .name = "tsc2007", - .of_match_table = of_match_ptr(tsc2007_of_match), + .of_match_table = tsc2007_of_match, }, .id_table = tsc2007_idtable, .probe = tsc2007_probe, diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c index 1afc6bde2891..22826c387da5 100644 --- a/drivers/input/touchscreen/wacom_i2c.c +++ b/drivers/input/touchscreen/wacom_i2c.c @@ -145,15 +145,16 @@ static void wacom_i2c_close(struct input_dev *dev) } static int wacom_i2c_probe(struct i2c_client *client, - const struct i2c_device_id *id) + const struct i2c_device_id *id) { + struct device *dev = &client->dev; struct wacom_i2c *wac_i2c; struct input_dev *input; struct wacom_features features = { 0 }; int error; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { - dev_err(&client->dev, "i2c_check_functionality error\n"); + dev_err(dev, "i2c_check_functionality error\n"); return -EIO; } @@ -161,21 +162,22 @@ static int wacom_i2c_probe(struct i2c_client *client, if (error) return error; - wac_i2c = kzalloc(sizeof(*wac_i2c), GFP_KERNEL); - input = input_allocate_device(); - if (!wac_i2c || !input) { - error = -ENOMEM; - goto err_free_mem; - } + wac_i2c = devm_kzalloc(dev, sizeof(*wac_i2c), GFP_KERNEL); + if (!wac_i2c) + return -ENOMEM; wac_i2c->client = client; + + input = devm_input_allocate_device(dev); + if (!input) + return -ENOMEM; + wac_i2c->input = input; input->name = "Wacom I2C Digitizer"; input->id.bustype = BUS_I2C; input->id.vendor = 0x56a; input->id.version = features.fw_version; - input->dev.parent = &client->dev; input->open = wacom_i2c_open; input->close = wacom_i2c_close; @@ -194,13 +196,11 @@ static int wacom_i2c_probe(struct i2c_client *client, input_set_drvdata(input, wac_i2c); - error = request_threaded_irq(client->irq, NULL, wacom_i2c_irq, - IRQF_TRIGGER_LOW | IRQF_ONESHOT, - "wacom_i2c", wac_i2c); + error = devm_request_threaded_irq(dev, client->irq, NULL, wacom_i2c_irq, + IRQF_ONESHOT, "wacom_i2c", wac_i2c); if (error) { - dev_err(&client->dev, - "Failed to enable IRQ, error: %d\n", error); - goto err_free_mem; + dev_err(dev, "Failed to request IRQ: %d\n", error); + return error; } /* Disable the IRQ, we'll enable it in wac_i2c_open() */ @@ -208,31 +208,10 @@ static int wacom_i2c_probe(struct i2c_client *client, error = input_register_device(wac_i2c->input); if (error) { - dev_err(&client->dev, - "Failed to register input device, error: %d\n", error); - goto err_free_irq; + dev_err(dev, "Failed to register input device: %d\n", error); + return error; } - i2c_set_clientdata(client, wac_i2c); - return 0; - -err_free_irq: - free_irq(client->irq, wac_i2c); -err_free_mem: - input_free_device(input); - kfree(wac_i2c); - - return error; -} - -static int wacom_i2c_remove(struct i2c_client *client) -{ - struct wacom_i2c *wac_i2c = i2c_get_clientdata(client); - - free_irq(client->irq, wac_i2c); - input_unregister_device(wac_i2c->input); - kfree(wac_i2c); - return 0; } @@ -269,7 +248,6 @@ static struct i2c_driver wacom_i2c_driver = { }, .probe = wacom_i2c_probe, - .remove = wacom_i2c_remove, .id_table = wacom_i2c_id, }; module_i2c_driver(wacom_i2c_driver); diff --git a/drivers/input/touchscreen/wm831x-ts.c b/drivers/input/touchscreen/wm831x-ts.c index bb1699e0d3c7..319f57fb9af5 100644 --- a/drivers/input/touchscreen/wm831x-ts.c +++ b/drivers/input/touchscreen/wm831x-ts.c @@ -317,14 +317,13 @@ static int wm831x_ts_probe(struct platform_device *pdev) error = request_threaded_irq(wm831x_ts->data_irq, NULL, wm831x_ts_data_irq, - irqf | IRQF_ONESHOT, + irqf | IRQF_ONESHOT | IRQF_NO_AUTOEN, "Touchscreen data", wm831x_ts); if (error) { dev_err(&pdev->dev, "Failed to request data IRQ %d: %d\n", wm831x_ts->data_irq, error); goto err_alloc; } - disable_irq(wm831x_ts->data_irq); if (pdata && pdata->pd_irqf) irqf = pdata->pd_irqf; diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c index 3b636beb583c..b8d901099378 100644 --- a/drivers/input/touchscreen/zinitix.c +++ b/drivers/input/touchscreen/zinitix.c @@ -513,10 +513,10 @@ static int zinitix_ts_probe(struct i2c_client *client) return -EINVAL; } - irq_set_status_flags(client->irq, IRQ_NOAUTOEN); error = devm_request_threaded_irq(&client->dev, client->irq, NULL, zinitix_ts_irq_handler, - IRQF_ONESHOT, client->name, bt541); + IRQF_ONESHOT | IRQF_NO_AUTOEN, + client->name, bt541); if (error) { dev_err(&client->dev, "Failed to request IRQ: %d\n", error); return error; |