summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-10-23 07:58:22 +0100
committerLinus Torvalds <torvalds@linux-foundation.org>2013-10-23 07:58:22 +0100
commit90338325a9cab8ff93359963e3a37be1c8907389 (patch)
tree58d7473cea8eec2300549df1a4e9bb25f2298377 /drivers
parentea89e1d320ebde318ae0217fec625102b9165774 (diff)
parent167c3ad268c2643b926d693f402e893ce64857a8 (diff)
Merge branch 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management fixes from Zhang Rui: "These includes several commits that are necessary to properly fix regression for TMU test MUX address setting after reset, for exynos thermal driver. Specifics: - fix a regression that the removal of setting a certain field at TMU configuration setting results in immediately shutdown after reset on Exynos4412 SoC. - revert a patch which tries to link the thermal_zone device and its hwmon node but breaks libsensors. - fix a deadlock/lockdep warning issue in x86_pkg_temp thermal driver, which can be reproduced on a buggy platform only. - fix ti-soc-thermal driver to fall back on bandgap reading when reading from PCB temperature sensor fails" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: Revert "drivers: thermal: parent virtual hwmon with thermal zone" drivers: thermal: allow ti-soc-thermal run without pcb zone thermal: exynos: Provide initial setting for TMU's test MUX address at Exynos4412 thermal: exynos: Provide separate TMU data for Exynos4412 thermal: exynos: Remove check for thermal device pointer at exynos_report_trigger() Thermal: x86_pkg_temp: change spin lock
Diffstat (limited to 'drivers')
-rw-r--r--drivers/thermal/samsung/exynos_thermal_common.c2
-rw-r--r--drivers/thermal/samsung/exynos_tmu.c12
-rw-r--r--drivers/thermal/samsung/exynos_tmu.h7
-rw-r--r--drivers/thermal/samsung/exynos_tmu_data.c30
-rw-r--r--drivers/thermal/samsung/exynos_tmu_data.h13
-rw-r--r--drivers/thermal/thermal_hwmon.c2
-rw-r--r--drivers/thermal/ti-soc-thermal/ti-thermal-common.c1
-rw-r--r--drivers/thermal/x86_pkg_temp_thermal.c14
8 files changed, 60 insertions, 21 deletions
diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
index f10a6ad37c06..c2301da08ac7 100644
--- a/drivers/thermal/samsung/exynos_thermal_common.c
+++ b/drivers/thermal/samsung/exynos_thermal_common.c
@@ -310,8 +310,6 @@ void exynos_report_trigger(struct thermal_sensor_conf *conf)
}
th_zone = conf->pzone_data;
- if (th_zone->therm_dev)
- return;
if (th_zone->bind == false) {
for (i = 0; i < th_zone->cool_dev_size; i++) {
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index b43afda8acd1..32f38b90c4f6 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -317,6 +317,9 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
con = readl(data->base + reg->tmu_ctrl);
+ if (pdata->test_mux)
+ con |= (pdata->test_mux << reg->test_mux_addr_shift);
+
if (pdata->reference_voltage) {
con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift);
con |= pdata->reference_voltage << reg->buf_vref_sel_shift;
@@ -488,7 +491,7 @@ static const struct of_device_id exynos_tmu_match[] = {
},
{
.compatible = "samsung,exynos4412-tmu",
- .data = (void *)EXYNOS5250_TMU_DRV_DATA,
+ .data = (void *)EXYNOS4412_TMU_DRV_DATA,
},
{
.compatible = "samsung,exynos5250-tmu",
@@ -629,9 +632,10 @@ static int exynos_tmu_probe(struct platform_device *pdev)
if (ret)
return ret;
- if (pdata->type == SOC_ARCH_EXYNOS ||
- pdata->type == SOC_ARCH_EXYNOS4210 ||
- pdata->type == SOC_ARCH_EXYNOS5440)
+ if (pdata->type == SOC_ARCH_EXYNOS4210 ||
+ pdata->type == SOC_ARCH_EXYNOS4412 ||
+ pdata->type == SOC_ARCH_EXYNOS5250 ||
+ pdata->type == SOC_ARCH_EXYNOS5440)
data->soc = pdata->type;
else {
ret = -EINVAL;
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index b364c9eee701..3fb65547e64c 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -41,7 +41,8 @@ enum calibration_mode {
enum soc_type {
SOC_ARCH_EXYNOS4210 = 1,
- SOC_ARCH_EXYNOS,
+ SOC_ARCH_EXYNOS4412,
+ SOC_ARCH_EXYNOS5250,
SOC_ARCH_EXYNOS5440,
};
@@ -84,6 +85,7 @@ enum soc_type {
* @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl
reg.
* @tmu_ctrl: TMU main controller register.
+ * @test_mux_addr_shift: shift bits of test mux address.
* @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register.
* @buf_vref_sel_mask: mask bits of reference voltage in tmu_ctrl register.
* @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register.
@@ -150,6 +152,7 @@ struct exynos_tmu_registers {
u32 triminfo_reload_shift;
u32 tmu_ctrl;
+ u32 test_mux_addr_shift;
u32 buf_vref_sel_shift;
u32 buf_vref_sel_mask;
u32 therm_trip_mode_shift;
@@ -257,6 +260,7 @@ struct exynos_tmu_registers {
* @first_point_trim: temp value of the first point trimming
* @second_point_trim: temp value of the second point trimming
* @default_temp_offset: default temperature offset in case of no trimming
+ * @test_mux; information if SoC supports test MUX
* @cal_type: calibration type for temperature
* @cal_mode: calibration mode for temperature
* @freq_clip_table: Table representing frequency reduction percentage.
@@ -286,6 +290,7 @@ struct exynos_tmu_platform_data {
u8 first_point_trim;
u8 second_point_trim;
u8 default_temp_offset;
+ u8 test_mux;
enum calibration_type cal_type;
enum calibration_mode cal_mode;
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 9002499c1f69..073c292baa53 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -90,14 +90,15 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
};
#endif
-#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
-static const struct exynos_tmu_registers exynos5250_tmu_registers = {
+#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
+static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
.triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
+ .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
@@ -128,7 +129,7 @@ static const struct exynos_tmu_registers exynos5250_tmu_registers = {
.emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
-#define EXYNOS5250_TMU_DATA \
+#define EXYNOS4412_TMU_DATA \
.threshold_falling = 10, \
.trigger_levels[0] = 85, \
.trigger_levels[1] = 103, \
@@ -162,15 +163,32 @@ static const struct exynos_tmu_registers exynos5250_tmu_registers = {
.temp_level = 103, \
}, \
.freq_tab_count = 2, \
- .type = SOC_ARCH_EXYNOS, \
- .registers = &exynos5250_tmu_registers, \
+ .registers = &exynos4412_tmu_registers, \
.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
TMU_SUPPORT_EMUL_TIME)
+#endif
+#if defined(CONFIG_SOC_EXYNOS4412)
+struct exynos_tmu_init_data const exynos4412_default_tmu_data = {
+ .tmu_data = {
+ {
+ EXYNOS4412_TMU_DATA,
+ .type = SOC_ARCH_EXYNOS4412,
+ .test_mux = EXYNOS4412_MUX_ADDR_VALUE,
+ },
+ },
+ .tmu_count = 1,
+};
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5250)
struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
.tmu_data = {
- { EXYNOS5250_TMU_DATA },
+ {
+ EXYNOS4412_TMU_DATA,
+ .type = SOC_ARCH_EXYNOS5250,
+ },
},
.tmu_count = 1,
};
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
index dc7feb51099b..a1ea19d9e0a6 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ b/drivers/thermal/samsung/exynos_tmu_data.h
@@ -95,6 +95,10 @@
#define EXYNOS_MAX_TRIGGER_PER_REG 4
+/* Exynos4412 specific */
+#define EXYNOS4412_MUX_ADDR_VALUE 6
+#define EXYNOS4412_MUX_ADDR_SHIFT 20
+
/*exynos5440 specific registers*/
#define EXYNOS5440_TMU_S0_7_TRIM 0x000
#define EXYNOS5440_TMU_S0_7_CTRL 0x020
@@ -138,7 +142,14 @@ extern struct exynos_tmu_init_data const exynos4210_default_tmu_data;
#define EXYNOS4210_TMU_DRV_DATA (NULL)
#endif
-#if (defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412))
+#if defined(CONFIG_SOC_EXYNOS4412)
+extern struct exynos_tmu_init_data const exynos4412_default_tmu_data;
+#define EXYNOS4412_TMU_DRV_DATA (&exynos4412_default_tmu_data)
+#else
+#define EXYNOS4412_TMU_DRV_DATA (NULL)
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5250)
extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
#define EXYNOS5250_TMU_DRV_DATA (&exynos5250_default_tmu_data)
#else
diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c
index eeef0e2498ca..fdb07199d9c2 100644
--- a/drivers/thermal/thermal_hwmon.c
+++ b/drivers/thermal/thermal_hwmon.c
@@ -159,7 +159,7 @@ int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
INIT_LIST_HEAD(&hwmon->tz_list);
strlcpy(hwmon->type, tz->type, THERMAL_NAME_LENGTH);
- hwmon->device = hwmon_device_register(&tz->device);
+ hwmon->device = hwmon_device_register(NULL);
if (IS_ERR(hwmon->device)) {
result = PTR_ERR(hwmon->device);
goto free_mem;
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 4f8b9af54a5a..5a47cc8c8f85 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -110,6 +110,7 @@ static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal,
} else {
dev_err(bgp->dev,
"Failed to read PCB state. Using defaults\n");
+ ret = 0;
}
}
*temp = ti_thermal_hotspot_temperature(tmp, slope, constant);
diff --git a/drivers/thermal/x86_pkg_temp_thermal.c b/drivers/thermal/x86_pkg_temp_thermal.c
index f36950e4134f..7722cb9d5a80 100644
--- a/drivers/thermal/x86_pkg_temp_thermal.c
+++ b/drivers/thermal/x86_pkg_temp_thermal.c
@@ -316,18 +316,19 @@ static void pkg_temp_thermal_threshold_work_fn(struct work_struct *work)
int phy_id = topology_physical_package_id(cpu);
struct phy_dev_entry *phdev = pkg_temp_thermal_get_phy_entry(cpu);
bool notify = false;
+ unsigned long flags;
if (!phdev)
return;
- spin_lock(&pkg_work_lock);
+ spin_lock_irqsave(&pkg_work_lock, flags);
++pkg_work_cnt;
if (unlikely(phy_id > max_phy_id)) {
- spin_unlock(&pkg_work_lock);
+ spin_unlock_irqrestore(&pkg_work_lock, flags);
return;
}
pkg_work_scheduled[phy_id] = 0;
- spin_unlock(&pkg_work_lock);
+ spin_unlock_irqrestore(&pkg_work_lock, flags);
enable_pkg_thres_interrupt();
rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
@@ -397,6 +398,7 @@ static int pkg_temp_thermal_device_add(unsigned int cpu)
int thres_count;
u32 eax, ebx, ecx, edx;
u8 *temp;
+ unsigned long flags;
cpuid(6, &eax, &ebx, &ecx, &edx);
thres_count = ebx & 0x07;
@@ -420,19 +422,19 @@ static int pkg_temp_thermal_device_add(unsigned int cpu)
goto err_ret_unlock;
}
- spin_lock(&pkg_work_lock);
+ spin_lock_irqsave(&pkg_work_lock, flags);
if (topology_physical_package_id(cpu) > max_phy_id)
max_phy_id = topology_physical_package_id(cpu);
temp = krealloc(pkg_work_scheduled,
(max_phy_id+1) * sizeof(u8), GFP_ATOMIC);
if (!temp) {
- spin_unlock(&pkg_work_lock);
+ spin_unlock_irqrestore(&pkg_work_lock, flags);
err = -ENOMEM;
goto err_ret_free;
}
pkg_work_scheduled = temp;
pkg_work_scheduled[topology_physical_package_id(cpu)] = 0;
- spin_unlock(&pkg_work_lock);
+ spin_unlock_irqrestore(&pkg_work_lock, flags);
phy_dev_entry->phys_proc_id = topology_physical_package_id(cpu);
phy_dev_entry->first_cpu = cpu;