diff options
| author | Ivan T. Ivanov <ivan.ivanov@linaro.org> | 2015-04-09 11:34:33 +0300 |
|---|---|---|
| committer | Felipe Balbi <balbi@ti.com> | 2015-04-28 11:49:15 -0500 |
| commit | 44e42ae3a398b559c768b9b3c324d72b0b0b4479 (patch) | |
| tree | 807a641fd57e3624e0b01fdb86b8968e8193df33 /drivers | |
| parent | 591fc116f3302da915bb57d4474a61a5e8884cec (diff) | |
usb: phy: msm: Manual PHY and LINK controller VBUS change notification
VBUS is not routed to USB PHY on recent Qualcomm platforms. USB controller
must see VBUS in order to pull-up DP when setting RS bit. Henc configure
USB PHY and LINK registers sense VBUS and enable manual pullup on D+ line.
Cc: Vamsi Krishna <vskrishn@codeaurora.org>
Cc: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/usb/phy/phy-msm-usb.c | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index ad66c67ce9a5..00c49bb1bd29 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -240,8 +240,14 @@ static void ulpi_init(struct msm_otg *motg) static int msm_phy_notify_disconnect(struct usb_phy *phy, enum usb_device_speed speed) { + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); int val; + if (motg->manual_pullup) { + val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL; + usb_phy_io_write(phy, val, ULPI_CLR(ULPI_MISC_A)); + } + /* * Put the transceiver in non-driving mode. Otherwise host * may not detect soft-disconnection. @@ -422,6 +428,24 @@ static int msm_phy_init(struct usb_phy *phy) ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL); } + if (motg->manual_pullup) { + val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT; + ulpi_write(phy, val, ULPI_SET(ULPI_MISC_A)); + + val = readl(USB_GENCONFIG_2); + val |= GENCONFIG_2_SESS_VLD_CTRL_EN; + writel(val, USB_GENCONFIG_2); + + val = readl(USB_USBCMD); + val |= USBCMD_SESS_VLD_CTRL; + writel(val, USB_USBCMD); + + val = ulpi_read(phy, ULPI_FUNC_CTRL); + val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; + val |= ULPI_FUNC_CTRL_OPMODE_NORMAL; + ulpi_write(phy, val, ULPI_FUNC_CTRL); + } + if (motg->phy_number) writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2); @@ -1520,6 +1544,8 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) motg->vdd_levels[VDD_LEVEL_MAX] = tmp[VDD_LEVEL_MAX]; } + motg->manual_pullup = of_property_read_bool(node, "qcom,manual-pullup"); + ext_id = ERR_PTR(-ENODEV); ext_vbus = ERR_PTR(-ENODEV); if (of_property_read_bool(node, "extcon")) { |