Add missing newlines to some uses of dev_<level> messages

Found these while looking at printk uses.

Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 9 insertions, 9 deletions

diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 1b94daa61584..cbe5530f3db2 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -227,7 +227,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
 				 0,
 				 100000);
 	if (result < 0)
-		dev_err(&port->dev, "Init of modem failed (error = %d)", result);
+		dev_err(&port->dev, "Init of modem failed (error = %d)\n", result);
 
 	/* reset the bulk pipes */
 	usb_clear_halt(dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress));
@@ -255,7 +255,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
 				 0,
 				 100000);
 	if (result < 0) 
-		dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)", result);
+		dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)\n", result);
 
 	/*--4: setup the initial flowcontrol */
 	dbg("%s:setting init flowcontrol (%s)",__FUNCTION__,buf_flow_init);
@@ -268,7 +268,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
 				 0x10,
 				 200000);
 	if (result < 0)
-		dev_err(&port->dev, "initial flowcontrol failed (error = %d)", result);
+		dev_err(&port->dev, "initial flowcontrol failed (error = %d)\n", result);
 
 
 	/*--5: raise the dtr */
@@ -282,7 +282,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
 				 0,
 				 200000);
 	if (result < 0)
-		dev_err(&port->dev, "setting dtr failed (error = %d)", result);
+		dev_err(&port->dev, "setting dtr failed (error = %d)\n", result);
 
 	/*--6: raise the rts */
 	dbg("%s:raising rts",__FUNCTION__);
@@ -295,7 +295,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
 				 0,
 				 200000);
 	if (result < 0)
-		dev_err(&port->dev, "setting dtr failed (error = %d)", result);
+		dev_err(&port->dev, "setting dtr failed (error = %d)\n", result);
 	
 	kfree(buf_flow_init);
 	return 0;
@@ -322,7 +322,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp)
 				 0,
 				 200000);
 	if (result < 0)
-		dev_err(&port->dev, "dropping dtr failed (error = %d)", result);
+		dev_err(&port->dev, "dropping dtr failed (error = %d)\n", result);
 
 	/*--2: drop the rts */
 	dbg("%s:dropping rts",__FUNCTION__);
@@ -334,7 +334,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp)
 				 0,
 				 200000);
 	if (result < 0)
-		dev_err(&port->dev, "dropping rts failed (error = %d)", result);
+		dev_err(&port->dev, "dropping rts failed (error = %d)\n", result);
 
 
 	/*--3: purge */
@@ -347,7 +347,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp)
 				 0,
 				 200000);
 	if (result < 0)
-		dev_err(&port->dev, "purge failed (error = %d)", result);
+		dev_err(&port->dev, "purge failed (error = %d)\n", result);
 
 
 	/* send RXBULK_off (tell modem to stop transmitting bulk data on rx chan) */
@@ -361,7 +361,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp)
 				 100000);
 
 	if (result < 0)
-		dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)", result);
+		dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)\n", result);
 
 	/* shutdown any in-flight urbs that we know about */
 	usb_kill_urb(port->read_urb);