serial: Remove old SC26XX driver

New driver for NXP (Philips) UART ICs was introduced in September 2012.
Old driver no longer used anywhere, this patch removes it.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 0 insertions, 768 deletions

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index a3817ab8602f..7fbbbadea2dd 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1146,31 +1146,13 @@ config SERIAL_QE
 	  This driver supports the QE serial ports on Freescale embedded
 	  PowerPC that contain a QUICC Engine.
 
-config SERIAL_SC26XX
-	tristate "SC2681/SC2692 serial port support"
-	depends on SNI_RM
-	select SERIAL_CORE
-	help
-	  This is a driver for the onboard serial ports of
-	  older RM400 machines.
-
-config SERIAL_SC26XX_CONSOLE
-	bool "Console on SC2681/SC2692 serial port"
-	depends on SERIAL_SC26XX=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Support for Console on SC2681/SC2692 serial ports.
-
 config SERIAL_SCCNXP
 	tristate "SCCNXP serial port support"
-	depends on !SERIAL_SC26XX
 	select SERIAL_CORE
-	default n
 	help
 	  This selects support for an advanced UART from NXP (Philips).
 	  Supported ICs are SCC2681, SCC2691, SCC2692, SC28L91, SC28L92,
 	  SC28L202, SCC68681 and SCC68692.
-	  Positioned as a replacement for the driver SC26XX.
 
 config SERIAL_SCCNXP_CONSOLE
 	bool "Console on SCCNXP serial port"
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 3068c7722087..3680854fef41 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -47,7 +47,6 @@ obj-$(CONFIG_SERIAL_M32R_SIO) += m32r_sio.o
 obj-$(CONFIG_SERIAL_MPSC) += mpsc.o
 obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
 obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
-obj-$(CONFIG_SERIAL_SC26XX) += sc26xx.o
 obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o
 obj-$(CONFIG_SERIAL_JSM) += jsm/
 obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c
deleted file mode 100644
index 887b4f770749..000000000000
--- a/drivers/tty/serial/sc26xx.c
+++ /dev/null
@@ -1,749 +0,0 @@
-/*
- * SC268xx.c: Serial driver for Philiphs SC2681/SC2692 devices.
- *
- * Copyright (C) 2006,2007 Thomas Bogendörfer (tsbogend@alpha.franken.de)
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/circ_buf.h>
-#include <linux/serial.h>
-#include <linux/sysrq.h>
-#include <linux/console.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#warning "Please try migrate to use new driver SCCNXP and report the status" \
-	 "in the linux-serial mailing list."
-
-#if defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/serial_core.h>
-
-#define SC26XX_MAJOR         204
-#define SC26XX_MINOR_START   205
-#define SC26XX_NR            2
-
-struct uart_sc26xx_port {
-	struct uart_port      port[2];
-	u8     dsr_mask[2];
-	u8     cts_mask[2];
-	u8     dcd_mask[2];
-	u8     ri_mask[2];
-	u8     dtr_mask[2];
-	u8     rts_mask[2];
-	u8     imr;
-};
-
-/* register common to both ports */
-#define RD_ISR      0x14
-#define RD_IPR      0x34
-
-#define WR_ACR      0x10
-#define WR_IMR      0x14
-#define WR_OPCR     0x34
-#define WR_OPR_SET  0x38
-#define WR_OPR_CLR  0x3C
-
-/* access common register */
-#define READ_SC(p, r)        readb((p)->membase + RD_##r)
-#define WRITE_SC(p, r, v)    writeb((v), (p)->membase + WR_##r)
-
-/* register per port */
-#define RD_PORT_MRx 0x00
-#define RD_PORT_SR  0x04
-#define RD_PORT_RHR 0x0c
-
-#define WR_PORT_MRx 0x00
-#define WR_PORT_CSR 0x04
-#define WR_PORT_CR  0x08
-#define WR_PORT_THR 0x0c
-
-/* SR bits */
-#define SR_BREAK    (1 << 7)
-#define SR_FRAME    (1 << 6)
-#define SR_PARITY   (1 << 5)
-#define SR_OVERRUN  (1 << 4)
-#define SR_TXRDY    (1 << 2)
-#define SR_RXRDY    (1 << 0)
-
-#define CR_RES_MR   (1 << 4)
-#define CR_RES_RX   (2 << 4)
-#define CR_RES_TX   (3 << 4)
-#define CR_STRT_BRK (6 << 4)
-#define CR_STOP_BRK (7 << 4)
-#define CR_DIS_TX   (1 << 3)
-#define CR_ENA_TX   (1 << 2)
-#define CR_DIS_RX   (1 << 1)
-#define CR_ENA_RX   (1 << 0)
-
-/* ISR bits */
-#define ISR_RXRDYB  (1 << 5)
-#define ISR_TXRDYB  (1 << 4)
-#define ISR_RXRDYA  (1 << 1)
-#define ISR_TXRDYA  (1 << 0)
-
-/* IMR bits */
-#define IMR_RXRDY   (1 << 1)
-#define IMR_TXRDY   (1 << 0)
-
-/* access port register */
-static inline u8 read_sc_port(struct uart_port *p, u8 reg)
-{
-	return readb(p->membase + p->line * 0x20 + reg);
-}
-
-static inline void write_sc_port(struct uart_port *p, u8 reg, u8 val)
-{
-	writeb(val, p->membase + p->line * 0x20 + reg);
-}
-
-#define READ_SC_PORT(p, r)     read_sc_port(p, RD_PORT_##r)
-#define WRITE_SC_PORT(p, r, v) write_sc_port(p, WR_PORT_##r, v)
-
-static void sc26xx_enable_irq(struct uart_port *port, int mask)
-{
-	struct uart_sc26xx_port *up;
-	int line = port->line;
-
-	port -= line;
-	up = container_of(port, struct uart_sc26xx_port, port[0]);
-
-	up->imr |= mask << (line * 4);
-	WRITE_SC(port, IMR, up->imr);
-}
-
-static void sc26xx_disable_irq(struct uart_port *port, int mask)
-{
-	struct uart_sc26xx_port *up;
-	int line = port->line;
-
-	port -= line;
-	up = container_of(port, struct uart_sc26xx_port, port[0]);
-
-	up->imr &= ~(mask << (line * 4));
-	WRITE_SC(port, IMR, up->imr);
-}
-
-static bool receive_chars(struct uart_port *port)
-{
-	struct tty_port *tport = NULL;
-	int limit = 10000;
-	unsigned char ch;
-	char flag;
-	u8 status;
-
-	/* FIXME what is this trying to achieve? */
-	if (port->state != NULL)		/* Unopened serial console */
-		tport = &port->state->port;
-
-	while (limit-- > 0) {
-		status = READ_SC_PORT(port, SR);
-		if (!(status & SR_RXRDY))
-			break;
-		ch = READ_SC_PORT(port, RHR);
-
-		flag = TTY_NORMAL;
-		port->icount.rx++;
-
-		if (unlikely(status & (SR_BREAK | SR_FRAME |
-				       SR_PARITY | SR_OVERRUN))) {
-			if (status & SR_BREAK) {
-				status &= ~(SR_PARITY | SR_FRAME);
-				port->icount.brk++;
-				if (uart_handle_break(port))
-					continue;
-			} else if (status & SR_PARITY)
-				port->icount.parity++;
-			else if (status & SR_FRAME)
-				port->icount.frame++;
-			if (status & SR_OVERRUN)
-				port->icount.overrun++;
-
-			status &= port->read_status_mask;
-			if (status & SR_BREAK)
-				flag = TTY_BREAK;
-			else if (status & SR_PARITY)
-				flag = TTY_PARITY;
-			else if (status & SR_FRAME)
-				flag = TTY_FRAME;
-		}
-
-		if (uart_handle_sysrq_char(port, ch))
-			continue;
-
-		if (status & port->ignore_status_mask)
-			continue;
-
-		tty_insert_flip_char(tport, ch, flag);
-	}
-	return !!tport;
-}
-
-static void transmit_chars(struct uart_port *port)
-{
-	struct circ_buf *xmit;
-
-	if (!port->state)
-		return;
-
-	xmit = &port->state->xmit;
-	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-		sc26xx_disable_irq(port, IMR_TXRDY);
-		return;
-	}
-	while (!uart_circ_empty(xmit)) {
-		if (!(READ_SC_PORT(port, SR) & SR_TXRDY))
-			break;
-
-		WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		port->icount.tx++;
-	}
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(port);
-}
-
-static irqreturn_t sc26xx_interrupt(int irq, void *dev_id)
-{
-	struct uart_sc26xx_port *up = dev_id;
-	unsigned long flags;
-	bool push;
-	u8 isr;
-
-	spin_lock_irqsave(&up->port[0].lock, flags);
-
-	push = false;
-	isr = READ_SC(&up->port[0], ISR);
-	if (isr & ISR_TXRDYA)
-	    transmit_chars(&up->port[0]);
-	if (isr & ISR_RXRDYA)
-	    push = receive_chars(&up->port[0]);
-
-	spin_unlock(&up->port[0].lock);
-
-	if (push)
-		tty_flip_buffer_push(&up->port[0].state->port);
-
-	spin_lock(&up->port[1].lock);
-
-	push = false;
-	if (isr & ISR_TXRDYB)
-	    transmit_chars(&up->port[1]);
-	if (isr & ISR_RXRDYB)
-	    push = receive_chars(&up->port[1]);
-
-	spin_unlock_irqrestore(&up->port[1].lock, flags);
-
-	if (push)
-		tty_flip_buffer_push(&up->port[1].state->port);
-
-	return IRQ_HANDLED;
-}
-
-/* port->lock is not held.  */
-static unsigned int sc26xx_tx_empty(struct uart_port *port)
-{
-	return (READ_SC_PORT(port, SR) & SR_TXRDY) ? TIOCSER_TEMT : 0;
-}
-
-/* port->lock held by caller.  */
-static void sc26xx_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-	struct uart_sc26xx_port *up;
-	int line = port->line;
-
-	port -= line;
-	up = container_of(port, struct uart_sc26xx_port, port[0]);
-
-	if (up->dtr_mask[line]) {
-		if (mctrl & TIOCM_DTR)
-			WRITE_SC(port, OPR_SET, up->dtr_mask[line]);
-		else
-			WRITE_SC(port, OPR_CLR, up->dtr_mask[line]);
-	}
-	if (up->rts_mask[line]) {
-		if (mctrl & TIOCM_RTS)
-			WRITE_SC(port, OPR_SET, up->rts_mask[line]);
-		else
-			WRITE_SC(port, OPR_CLR, up->rts_mask[line]);
-	}
-}
-
-/* port->lock is held by caller and interrupts are disabled.  */
-static unsigned int sc26xx_get_mctrl(struct uart_port *port)
-{
-	struct uart_sc26xx_port *up;
-	int line = port->line;
-	unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
-	u8 ipr;
-
-	port -= line;
-	up = container_of(port, struct uart_sc26xx_port, port[0]);
-	ipr = READ_SC(port, IPR) ^ 0xff;
-
-	if (up->dsr_mask[line]) {
-		mctrl &= ~TIOCM_DSR;
-		mctrl |= ipr & up->dsr_mask[line] ? TIOCM_DSR : 0;
-	}
-	if (up->cts_mask[line]) {
-		mctrl &= ~TIOCM_CTS;
-		mctrl |= ipr & up->cts_mask[line] ? TIOCM_CTS : 0;
-	}
-	if (up->dcd_mask[line]) {
-		mctrl &= ~TIOCM_CAR;
-		mctrl |= ipr & up->dcd_mask[line] ? TIOCM_CAR : 0;
-	}
-	if (up->ri_mask[line]) {
-		mctrl &= ~TIOCM_RNG;
-		mctrl |= ipr & up->ri_mask[line] ? TIOCM_RNG : 0;
-	}
-	return mctrl;
-}
-
-/* port->lock held by caller.  */
-static void sc26xx_stop_tx(struct uart_port *port)
-{
-	return;
-}
-
-/* port->lock held by caller.  */
-static void sc26xx_start_tx(struct uart_port *port)
-{
-	struct circ_buf *xmit = &port->state->xmit;
-
-	while (!uart_circ_empty(xmit)) {
-		if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) {
-			sc26xx_enable_irq(port, IMR_TXRDY);
-			break;
-		}
-		WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		port->icount.tx++;
-	}
-}
-
-/* port->lock held by caller.  */
-static void sc26xx_stop_rx(struct uart_port *port)
-{
-}
-
-/* port->lock held by caller.  */
-static void sc26xx_enable_ms(struct uart_port *port)
-{
-}
-
-/* port->lock is not held.  */
-static void sc26xx_break_ctl(struct uart_port *port, int break_state)
-{
-	if (break_state == -1)
-		WRITE_SC_PORT(port, CR, CR_STRT_BRK);
-	else
-		WRITE_SC_PORT(port, CR, CR_STOP_BRK);
-}
-
-/* port->lock is not held.  */
-static int sc26xx_startup(struct uart_port *port)
-{
-	sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
-	WRITE_SC(port, OPCR, 0);
-
-	/* reset tx and rx */
-	WRITE_SC_PORT(port, CR, CR_RES_RX);
-	WRITE_SC_PORT(port, CR, CR_RES_TX);
-
-	/* start rx/tx */
-	WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX);
-
-	/* enable irqs */
-	sc26xx_enable_irq(port, IMR_RXRDY);
-	return 0;
-}
-
-/* port->lock is not held.  */
-static void sc26xx_shutdown(struct uart_port *port)
-{
-	/* disable interrupst */
-	sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
-
-	/* stop tx/rx */
-	WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX);
-}
-
-/* port->lock is not held.  */
-static void sc26xx_set_termios(struct uart_port *port, struct ktermios *termios,
-			      struct ktermios *old)
-{
-	unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
-	unsigned int quot = uart_get_divisor(port, baud);
-	unsigned int iflag, cflag;
-	unsigned long flags;
-	u8 mr1, mr2, csr;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc)
-		udelay(2);
-
-	WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX);
-
-	iflag = termios->c_iflag;
-	cflag = termios->c_cflag;
-
-	port->read_status_mask = SR_OVERRUN;
-	if (iflag & INPCK)
-		port->read_status_mask |= SR_PARITY | SR_FRAME;
-	if (iflag & (BRKINT | PARMRK))
-		port->read_status_mask |= SR_BREAK;
-
-	port->ignore_status_mask = 0;
-	if (iflag & IGNBRK)
-		port->ignore_status_mask |= SR_BREAK;
-	if ((cflag & CREAD) == 0)
-		port->ignore_status_mask |= SR_BREAK | SR_FRAME |
-					    SR_PARITY | SR_OVERRUN;
-
-	switch (cflag & CSIZE) {
-	case CS5:
-		mr1 = 0x00;
-		break;
-	case CS6:
-		mr1 = 0x01;
-		break;
-	case CS7:
-		mr1 = 0x02;
-		break;
-	default:
-	case CS8:
-		mr1 = 0x03;
-		break;
-	}
-	mr2 = 0x07;
-	if (cflag & CSTOPB)
-		mr2 = 0x0f;
-	if (cflag & PARENB) {
-		if (cflag & PARODD)
-			mr1 |= (1 << 2);
-	} else
-		mr1 |= (2 << 3);
-
-	switch (baud) {
-	case 50:
-		csr = 0x00;
-		break;
-	case 110:
-		csr = 0x11;
-		break;
-	case 134:
-		csr = 0x22;
-		break;
-	case 200:
-		csr = 0x33;
-		break;
-	case 300:
-		csr = 0x44;
-		break;
-	case 600:
-		csr = 0x55;
-		break;
-	case 1200:
-		csr = 0x66;
-		break;
-	case 2400:
-		csr = 0x88;
-		break;
-	case 4800:
-		csr = 0x99;
-		break;
-	default:
-	case 9600:
-		csr = 0xbb;
-		break;
-	case 19200:
-		csr = 0xcc;
-		break;
-	}
-
-	WRITE_SC_PORT(port, CR, CR_RES_MR);
-	WRITE_SC_PORT(port, MRx, mr1);
-	WRITE_SC_PORT(port, MRx, mr2);
-
-	WRITE_SC(port, ACR, 0x80);
-	WRITE_SC_PORT(port, CSR, csr);
-
-	/* reset tx and rx */
-	WRITE_SC_PORT(port, CR, CR_RES_RX);
-	WRITE_SC_PORT(port, CR, CR_RES_TX);
-
-	WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX);
-	while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc)
-		udelay(2);
-
-	/* XXX */
-	uart_update_timeout(port, cflag,
-			    (port->uartclk / (16 * quot)));
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static const char *sc26xx_type(struct uart_port *port)
-{
-	return "SC26XX";
-}
-
-static void sc26xx_release_port(struct uart_port *port)
-{
-}
-
-static int sc26xx_request_port(struct uart_port *port)
-{
-	return 0;
-}
-
-static void sc26xx_config_port(struct uart_port *port, int flags)
-{
-}
-
-static int sc26xx_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
-	return -EINVAL;
-}
-
-static struct uart_ops sc26xx_ops = {
-	.tx_empty	= sc26xx_tx_empty,
-	.set_mctrl	= sc26xx_set_mctrl,
-	.get_mctrl	= sc26xx_get_mctrl,
-	.stop_tx	= sc26xx_stop_tx,
-	.start_tx	= sc26xx_start_tx,
-	.stop_rx	= sc26xx_stop_rx,
-	.enable_ms	= sc26xx_enable_ms,
-	.break_ctl	= sc26xx_break_ctl,
-	.startup	= sc26xx_startup,
-	.shutdown	= sc26xx_shutdown,
-	.set_termios	= sc26xx_set_termios,
-	.type		= sc26xx_type,
-	.release_port	= sc26xx_release_port,
-	.request_port	= sc26xx_request_port,
-	.config_port	= sc26xx_config_port,
-	.verify_port	= sc26xx_verify_port,
-};
-
-static struct uart_port *sc26xx_port;
-
-#ifdef CONFIG_SERIAL_SC26XX_CONSOLE
-static void sc26xx_console_putchar(struct uart_port *port, char c)
-{
-	unsigned long flags;
-	int limit = 1000000;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	while (limit-- > 0) {
-		if (READ_SC_PORT(port, SR) & SR_TXRDY) {
-			WRITE_SC_PORT(port, THR, c);
-			break;
-		}
-		udelay(2);
-	}
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void sc26xx_console_write(struct console *con, const char *s, unsigned n)
-{
-	struct uart_port *port = sc26xx_port;
-	int i;
-
-	for (i = 0; i < n; i++) {
-		if (*s == '\n')
-			sc26xx_console_putchar(port, '\r');
-		sc26xx_console_putchar(port, *s++);
-	}
-}
-
-static int __init sc26xx_console_setup(struct console *con, char *options)
-{
-	struct uart_port *port = sc26xx_port;
-	int baud = 9600;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
-
-	if (port->type != PORT_SC26XX)
-		return -1;
-
-	printk(KERN_INFO "Console: ttySC%d (SC26XX)\n", con->index);
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
-
-	return uart_set_options(port, con, baud, parity, bits, flow);
-}
-
-static struct uart_driver sc26xx_reg;
-static struct console sc26xx_console = {
-	.name	=	"ttySC",
-	.write	=	sc26xx_console_write,
-	.device	=	uart_console_device,
-	.setup  =       sc26xx_console_setup,
-	.flags	=	CON_PRINTBUFFER,
-	.index	=	-1,
-	.data	=	&sc26xx_reg,
-};
-#define SC26XX_CONSOLE   &sc26xx_console
-#else
-#define SC26XX_CONSOLE   NULL
-#endif
-
-static struct uart_driver sc26xx_reg = {
-	.owner			= THIS_MODULE,
-	.driver_name		= "SC26xx",
-	.dev_name		= "ttySC",
-	.major			= SC26XX_MAJOR,
-	.minor			= SC26XX_MINOR_START,
-	.nr			= SC26XX_NR,
-	.cons                   = SC26XX_CONSOLE,
-};
-
-static u8 sc26xx_flags2mask(unsigned int flags, unsigned int bitpos)
-{
-	unsigned int bit = (flags >> bitpos) & 15;
-
-	return bit ? (1 << (bit - 1)) : 0;
-}
-
-static void sc26xx_init_masks(struct uart_sc26xx_port *up,
-					int line, unsigned int data)
-{
-	up->dtr_mask[line] = sc26xx_flags2mask(data,  0);
-	up->rts_mask[line] = sc26xx_flags2mask(data,  4);
-	up->dsr_mask[line] = sc26xx_flags2mask(data,  8);
-	up->cts_mask[line] = sc26xx_flags2mask(data, 12);
-	up->dcd_mask[line] = sc26xx_flags2mask(data, 16);
-	up->ri_mask[line]  = sc26xx_flags2mask(data, 20);
-}
-
-static int sc26xx_probe(struct platform_device *dev)
-{
-	struct resource *res;
-	struct uart_sc26xx_port *up;
-	unsigned int *sc26xx_data = dev_get_platdata(&dev->dev);
-	int err;
-
-	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
-
-	up = kzalloc(sizeof *up, GFP_KERNEL);
-	if (unlikely(!up))
-		return -ENOMEM;
-
-	up->port[0].line = 0;
-	up->port[0].ops = &sc26xx_ops;
-	up->port[0].type = PORT_SC26XX;
-	up->port[0].uartclk = (29491200 / 16); /* arbitrary */
-
-	up->port[0].mapbase = res->start;
-	up->port[0].membase = ioremap_nocache(up->port[0].mapbase, 0x40);
-	up->port[0].iotype = UPIO_MEM;
-	up->port[0].irq = platform_get_irq(dev, 0);
-
-	up->port[0].dev = &dev->dev;
-
-	sc26xx_init_masks(up, 0, sc26xx_data[0]);
-
-	sc26xx_port = &up->port[0];
-
-	up->port[1].line = 1;
-	up->port[1].ops = &sc26xx_ops;
-	up->port[1].type = PORT_SC26XX;
-	up->port[1].uartclk = (29491200 / 16); /* arbitrary */
-
-	up->port[1].mapbase = up->port[0].mapbase;
-	up->port[1].membase = up->port[0].membase;
-	up->port[1].iotype = UPIO_MEM;
-	up->port[1].irq = up->port[0].irq;
-
-	up->port[1].dev = &dev->dev;
-
-	sc26xx_init_masks(up, 1, sc26xx_data[1]);
-
-	err = uart_register_driver(&sc26xx_reg);
-	if (err)
-		goto out_free_port;
-
-	sc26xx_reg.tty_driver->name_base = sc26xx_reg.minor;
-
-	err = uart_add_one_port(&sc26xx_reg, &up->port[0]);
-	if (err)
-		goto out_unregister_driver;
-
-	err = uart_add_one_port(&sc26xx_reg, &up->port[1]);
-	if (err)
-		goto out_remove_port0;
-
-	err = request_irq(up->port[0].irq, sc26xx_interrupt, 0, "sc26xx", up);
-	if (err)
-		goto out_remove_ports;
-
-	platform_set_drvdata(dev, up);
-	return 0;
-
-out_remove_ports:
-	uart_remove_one_port(&sc26xx_reg, &up->port[1]);
-out_remove_port0:
-	uart_remove_one_port(&sc26xx_reg, &up->port[0]);
-
-out_unregister_driver:
-	uart_unregister_driver(&sc26xx_reg);
-
-out_free_port:
-	kfree(up);
-	sc26xx_port = NULL;
-	return err;
-}
-
-
-static int __exit sc26xx_driver_remove(struct platform_device *dev)
-{
-	struct uart_sc26xx_port *up = platform_get_drvdata(dev);
-
-	free_irq(up->port[0].irq, up);
-
-	uart_remove_one_port(&sc26xx_reg, &up->port[0]);
-	uart_remove_one_port(&sc26xx_reg, &up->port[1]);
-
-	uart_unregister_driver(&sc26xx_reg);
-
-	kfree(up);
-	sc26xx_port = NULL;
-
-	return 0;
-}
-
-static struct platform_driver sc26xx_driver = {
-	.probe	= sc26xx_probe,
-	.remove	= sc26xx_driver_remove,
-	.driver	= {
-		.name	= "SC26xx",
-		.owner	= THIS_MODULE,
-	},
-};
-
-module_platform_driver(sc26xx_driver);
-
-MODULE_AUTHOR("Thomas Bogendörfer");
-MODULE_DESCRIPTION("SC681/SC2692 serial driver");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:SC26xx");