drivers: thermal: Move various drivers for intel platforms into a subdir

This cleans up the directory a bit, now that we have several other
platforms using platform-specific sub-directories. Compile-tested with
ARCH=x86 defconfig and the drivers explicitly enabled with menuconfig.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

1 files changed, 0 insertions, 132 deletions

diff --git a/drivers/thermal/intel_soc_dts_thermal.c b/drivers/thermal/intel_soc_dts_thermal.c
deleted file mode 100644
index d748527d7a38..000000000000
--- a/drivers/thermal/intel_soc_dts_thermal.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * intel_soc_dts_thermal.c
- * Copyright (c) 2014, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/acpi.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <asm/cpu_device_id.h>
-#include <asm/intel-family.h>
-#include "intel_soc_dts_iosf.h"
-
-#define CRITICAL_OFFSET_FROM_TJ_MAX	5000
-
-static int crit_offset = CRITICAL_OFFSET_FROM_TJ_MAX;
-module_param(crit_offset, int, 0644);
-MODULE_PARM_DESC(crit_offset,
-	"Critical Temperature offset from tj max in millidegree Celsius.");
-
-/* IRQ 86 is a fixed APIC interrupt for BYT DTS Aux threshold notifications */
-#define BYT_SOC_DTS_APIC_IRQ	86
-
-static int soc_dts_thres_gsi;
-static int soc_dts_thres_irq;
-static struct intel_soc_dts_sensors *soc_dts;
-
-static irqreturn_t soc_irq_thread_fn(int irq, void *dev_data)
-{
-	pr_debug("proc_thermal_interrupt\n");
-	intel_soc_dts_iosf_interrupt_handler(soc_dts);
-
-	return IRQ_HANDLED;
-}
-
-static const struct x86_cpu_id soc_thermal_ids[] = {
-	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT, 0,
-		BYT_SOC_DTS_APIC_IRQ},
-	{}
-};
-MODULE_DEVICE_TABLE(x86cpu, soc_thermal_ids);
-
-static int __init intel_soc_thermal_init(void)
-{
-	int err = 0;
-	const struct x86_cpu_id *match_cpu;
-
-	match_cpu = x86_match_cpu(soc_thermal_ids);
-	if (!match_cpu)
-		return -ENODEV;
-
-	/* Create a zone with 2 trips with marked as read only */
-	soc_dts = intel_soc_dts_iosf_init(INTEL_SOC_DTS_INTERRUPT_APIC, 2, 1);
-	if (IS_ERR(soc_dts)) {
-		err = PTR_ERR(soc_dts);
-		return err;
-	}
-
-	soc_dts_thres_gsi = (int)match_cpu->driver_data;
-	if (soc_dts_thres_gsi) {
-		/*
-		 * Note the flags here MUST match the firmware defaults, rather
-		 * then the request_irq flags, otherwise we get an EBUSY error.
-		 */
-		soc_dts_thres_irq = acpi_register_gsi(NULL, soc_dts_thres_gsi,
-						      ACPI_LEVEL_SENSITIVE,
-						      ACPI_ACTIVE_LOW);
-		if (soc_dts_thres_irq < 0) {
-			pr_warn("intel_soc_dts: Could not get IRQ for GSI %d, err %d\n",
-				soc_dts_thres_gsi, soc_dts_thres_irq);
-			soc_dts_thres_irq = 0;
-		}
-	}
-
-	if (soc_dts_thres_irq) {
-		err = request_threaded_irq(soc_dts_thres_irq, NULL,
-					   soc_irq_thread_fn,
-					   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
-					   "soc_dts", soc_dts);
-		if (err) {
-			/*
-			 * Do not just error out because the user space thermal
-			 * daemon such as DPTF may use polling instead of being
-			 * interrupt driven.
-			 */
-			pr_warn("request_threaded_irq ret %d\n", err);
-		}
-	}
-
-	err = intel_soc_dts_iosf_add_read_only_critical_trip(soc_dts,
-							     crit_offset);
-	if (err)
-		goto error_trips;
-
-	return 0;
-
-error_trips:
-	if (soc_dts_thres_irq) {
-		free_irq(soc_dts_thres_irq, soc_dts);
-		acpi_unregister_gsi(soc_dts_thres_gsi);
-	}
-	intel_soc_dts_iosf_exit(soc_dts);
-
-	return err;
-}
-
-static void __exit intel_soc_thermal_exit(void)
-{
-	if (soc_dts_thres_irq) {
-		free_irq(soc_dts_thres_irq, soc_dts);
-		acpi_unregister_gsi(soc_dts_thres_gsi);
-	}
-	intel_soc_dts_iosf_exit(soc_dts);
-}
-
-module_init(intel_soc_thermal_init)
-module_exit(intel_soc_thermal_exit)
-
-MODULE_DESCRIPTION("Intel SoC DTS Thermal Driver");
-MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
-MODULE_LICENSE("GPL v2");