diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-03-13 11:07:37 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-03-13 11:07:37 -0700 |
| commit | 6cdebf62a159f31351946685b02941c968b96e49 (patch) | |
| tree | 06aa5c4552b7991b5cdde855cdf6b9a8892372ba /drivers/spi | |
| parent | 21ac5a96513c6588c9a71bffa16d665675930a60 (diff) | |
| parent | be84be4a35fa99cca7e81e6dd21516a324cca413 (diff) | |
Merge tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release sees some exciting changes from David Lechner which
implements some optimisations that have been talked about for a long
time which allows client drivers to pre-prepare SPI messages for
repeated or low latency use. This lets us move work out of latency
sensitive paths and avoid repeating work for frequently performed
operations. As well as being useful in itself this will also be used
in future to allow controllers to directly trigger SPI operations (eg,
from interrupts).
Otherwise this release has mostly been focused on cleanups, plus a
couple of new devices:
- Support for pre-optimising messages
- A big set of updates from Uwe Kleine-König moving drivers to use
APIs with more modern terminology for controllers
- Major overhaul of the s3c64xx driver
- Support for Google GS101 and Samsung Exynos850"
* tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits)
spi: Introduce SPI_INVALID_CS and is_valid_cs()
spi: Fix types of the last chip select storage variables
spi: Consistently use BIT for cs_index_mask
spi: Exctract spi_dev_check_cs() helper
spi: Exctract spi_set_all_cs_unused() helper
spi: s3c64xx: switch exynos850 to new port config data
spi: s3c64xx: switch gs101 to new port config data
spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id
spi: s3c64xx: get rid of the OF alias ID dependency
spi: s3c64xx: introduce s3c64xx_spi_set_port_id()
spi: s3c64xx: let the SPI core determine the bus number
spi: s3c64xx: allow FIFO depth to be determined from the compatible
spi: s3c64xx: retrieve the FIFO depth from the device tree
spi: s3c64xx: determine the fifo depth only once
spi: s3c64xx: allow full FIFO masks
spi: s3c64xx: define a magic value
spi: dt-bindings: introduce FIFO depth properties
spi: axi-spi-engine: use struct_size() macro
spi: axi-spi-engine: use __counted_by() attribute
spi: axi-spi-engine: remove p from struct spi_engine_message_state
...
Diffstat (limited to 'drivers/spi')
38 files changed, 1294 insertions, 563 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index ddae0fde798e..bc7021da2fe9 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -694,7 +694,7 @@ config SPI_MTK_SNFI This enables support for SPI-NAND mode on the MediaTek NAND Flash Interface found on MediaTek ARM SoCs. This controller is implemented as a SPI-MEM controller with pipelined ECC - capcability. + capability. config SPI_WPCM_FIU tristate "Nuvoton WPCM450 Flash Interface Unit" diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c index b7ada981464a..d78762d4db98 100644 --- a/drivers/spi/spi-ath79.c +++ b/drivers/spi/spi-ath79.c @@ -189,7 +189,7 @@ static int ath79_spi_probe(struct platform_device *pdev) host->num_chipselect = 3; host->mem_ops = &ath79_mem_ops; - sp->bitbang.master = host; + sp->bitbang.ctlr = host; sp->bitbang.chipselect = ath79_spi_chipselect; sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0; sp->bitbang.flags = SPI_CS_HIGH; @@ -237,7 +237,7 @@ static void ath79_spi_remove(struct platform_device *pdev) spi_bitbang_stop(&sp->bitbang); ath79_spi_disable(sp); - spi_controller_put(sp->bitbang.master); + spi_controller_put(sp->bitbang.ctlr); } static void ath79_spi_shutdown(struct platform_device *pdev) diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c index 1011b1a8f241..825d2f1cdff8 100644 --- a/drivers/spi/spi-au1550.c +++ b/drivers/spi/spi-au1550.c @@ -800,7 +800,7 @@ static int au1550_spi_probe(struct platform_device *pdev) init_completion(&hw->host_done); - hw->bitbang.master = hw->host; + hw->bitbang.ctlr = hw->host; hw->bitbang.setup_transfer = au1550_spi_setupxfer; hw->bitbang.chipselect = au1550_spi_chipsel; hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs; diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c index 9ace259d2d29..7cc219d78551 100644 --- a/drivers/spi/spi-axi-spi-engine.c +++ b/drivers/spi/spi-axi-spi-engine.c @@ -6,20 +6,15 @@ */ #include <linux/clk.h> -#include <linux/idr.h> +#include <linux/completion.h> +#include <linux/fpga/adi-axi-common.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/of.h> #include <linux/module.h> +#include <linux/overflow.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> -#include <linux/timer.h> - -#define SPI_ENGINE_VERSION_MAJOR(x) ((x >> 16) & 0xff) -#define SPI_ENGINE_VERSION_MINOR(x) ((x >> 8) & 0xff) -#define SPI_ENGINE_VERSION_PATCH(x) (x & 0xff) - -#define SPI_ENGINE_REG_VERSION 0x00 #define SPI_ENGINE_REG_RESET 0x40 @@ -62,6 +57,9 @@ #define SPI_ENGINE_TRANSFER_WRITE 0x1 #define SPI_ENGINE_TRANSFER_READ 0x2 +/* Arbitrary sync ID for use by host->cur_msg */ +#define AXI_SPI_ENGINE_CUR_MSG_SYNC_ID 0x1 + #define SPI_ENGINE_CMD(inst, arg1, arg2) \ (((inst) << 12) | ((arg1) << 8) | (arg2)) @@ -78,15 +76,13 @@ struct spi_engine_program { unsigned int length; - uint16_t instructions[]; + uint16_t instructions[] __counted_by(length); }; /** * struct spi_engine_message_state - SPI engine per-message state */ struct spi_engine_message_state { - /** @p: Instructions for executing this message. */ - struct spi_engine_program *p; /** @cmd_length: Number of elements in cmd_buf array. */ unsigned cmd_length; /** @cmd_buf: Array of commands not yet written to CMD FIFO. */ @@ -103,8 +99,6 @@ struct spi_engine_message_state { unsigned int rx_length; /** @rx_buf: Bytes not yet written to the RX FIFO. */ uint8_t *rx_buf; - /** @sync_id: ID to correlate SYNC interrupts with this message. */ - u8 sync_id; }; struct spi_engine { @@ -114,19 +108,18 @@ struct spi_engine { spinlock_t lock; void __iomem *base; - struct ida sync_ida; - struct timer_list watchdog_timer; - struct spi_controller *controller; - + struct spi_engine_message_state msg_state; + struct completion msg_complete; unsigned int int_enable; }; static void spi_engine_program_add_cmd(struct spi_engine_program *p, bool dry, uint16_t cmd) { - if (!dry) - p->instructions[p->length] = cmd; p->length++; + + if (!dry) + p->instructions[p->length - 1] = cmd; } static unsigned int spi_engine_get_config(struct spi_device *spi) @@ -488,14 +481,10 @@ static irqreturn_t spi_engine_irq(int irq, void *devid) } if (pending & SPI_ENGINE_INT_SYNC && msg) { - struct spi_engine_message_state *st = msg->state; - - if (completed_id == st->sync_id) { - if (timer_delete_sync(&spi_engine->watchdog_timer)) { - msg->status = 0; - msg->actual_length = msg->frame_length; - spi_finalize_current_message(host); - } + if (completed_id == AXI_SPI_ENGINE_CUR_MSG_SYNC_ID) { + msg->status = 0; + msg->actual_length = msg->frame_length; + complete(&spi_engine->msg_complete); disable_int |= SPI_ENGINE_INT_SYNC; } } @@ -511,61 +500,32 @@ static irqreturn_t spi_engine_irq(int irq, void *devid) return IRQ_HANDLED; } -static int spi_engine_prepare_message(struct spi_controller *host, - struct spi_message *msg) +static int spi_engine_optimize_message(struct spi_message *msg) { struct spi_engine_program p_dry, *p; - struct spi_engine *spi_engine = spi_controller_get_devdata(host); - struct spi_engine_message_state *st; - size_t size; - int ret; - - st = kzalloc(sizeof(*st), GFP_KERNEL); - if (!st) - return -ENOMEM; spi_engine_precompile_message(msg); p_dry.length = 0; spi_engine_compile_message(msg, true, &p_dry); - size = sizeof(*p->instructions) * (p_dry.length + 1); - p = kzalloc(sizeof(*p) + size, GFP_KERNEL); - if (!p) { - kfree(st); + p = kzalloc(struct_size(p, instructions, p_dry.length + 1), GFP_KERNEL); + if (!p) return -ENOMEM; - } - - ret = ida_alloc_range(&spi_engine->sync_ida, 0, U8_MAX, GFP_KERNEL); - if (ret < 0) { - kfree(p); - kfree(st); - return ret; - } - - st->sync_id = ret; spi_engine_compile_message(msg, false, p); - spi_engine_program_add_cmd(p, false, SPI_ENGINE_CMD_SYNC(st->sync_id)); + spi_engine_program_add_cmd(p, false, SPI_ENGINE_CMD_SYNC( + AXI_SPI_ENGINE_CUR_MSG_SYNC_ID)); - st->p = p; - st->cmd_buf = p->instructions; - st->cmd_length = p->length; - msg->state = st; + msg->opt_state = p; return 0; } -static int spi_engine_unprepare_message(struct spi_controller *host, - struct spi_message *msg) +static int spi_engine_unoptimize_message(struct spi_message *msg) { - struct spi_engine *spi_engine = spi_controller_get_devdata(host); - struct spi_engine_message_state *st = msg->state; - - ida_free(&spi_engine->sync_ida, st->sync_id); - kfree(st->p); - kfree(st); + kfree(msg->opt_state); return 0; } @@ -574,11 +534,18 @@ static int spi_engine_transfer_one_message(struct spi_controller *host, struct spi_message *msg) { struct spi_engine *spi_engine = spi_controller_get_devdata(host); - struct spi_engine_message_state *st = msg->state; + struct spi_engine_message_state *st = &spi_engine->msg_state; + struct spi_engine_program *p = msg->opt_state; unsigned int int_enable = 0; unsigned long flags; - mod_timer(&spi_engine->watchdog_timer, jiffies + msecs_to_jiffies(5000)); + /* reinitialize message state for this transfer */ + memset(st, 0, sizeof(*st)); + st->cmd_buf = p->instructions; + st->cmd_length = p->length; + msg->state = st; + + reinit_completion(&spi_engine->msg_complete); spin_lock_irqsave(&spi_engine->lock, flags); @@ -600,21 +567,16 @@ static int spi_engine_transfer_one_message(struct spi_controller *host, spi_engine->int_enable = int_enable; spin_unlock_irqrestore(&spi_engine->lock, flags); - return 0; -} - -static void spi_engine_timeout(struct timer_list *timer) -{ - struct spi_engine *spi_engine = from_timer(spi_engine, timer, watchdog_timer); - struct spi_controller *host = spi_engine->controller; - - if (WARN_ON(!host->cur_msg)) - return; + if (!wait_for_completion_timeout(&spi_engine->msg_complete, + msecs_to_jiffies(5000))) { + dev_err(&host->dev, + "Timeout occurred while waiting for transfer to complete. Hardware is probably broken.\n"); + msg->status = -ETIMEDOUT; + } - dev_err(&host->dev, - "Timeout occurred while waiting for transfer to complete. Hardware is probably broken.\n"); - host->cur_msg->status = -ETIMEDOUT; spi_finalize_current_message(host); + + return msg->status; } static void spi_engine_release_hw(void *p) @@ -645,9 +607,7 @@ static int spi_engine_probe(struct platform_device *pdev) spi_engine = spi_controller_get_devdata(host); spin_lock_init(&spi_engine->lock); - ida_init(&spi_engine->sync_ida); - timer_setup(&spi_engine->watchdog_timer, spi_engine_timeout, TIMER_IRQSAFE); - spi_engine->controller = host; + init_completion(&spi_engine->msg_complete); spi_engine->clk = devm_clk_get_enabled(&pdev->dev, "s_axi_aclk"); if (IS_ERR(spi_engine->clk)) @@ -661,12 +621,12 @@ static int spi_engine_probe(struct platform_device *pdev) if (IS_ERR(spi_engine->base)) return PTR_ERR(spi_engine->base); - version = readl(spi_engine->base + SPI_ENGINE_REG_VERSION); - if (SPI_ENGINE_VERSION_MAJOR(version) != 1) { + version = readl(spi_engine->base + ADI_AXI_REG_VERSION); + if (ADI_AXI_PCORE_VER_MAJOR(version) != 1) { dev_err(&pdev->dev, "Unsupported peripheral version %u.%u.%c\n", - SPI_ENGINE_VERSION_MAJOR(version), - SPI_ENGINE_VERSION_MINOR(version), - SPI_ENGINE_VERSION_PATCH(version)); + ADI_AXI_PCORE_VER_MAJOR(version), + ADI_AXI_PCORE_VER_MINOR(version), + ADI_AXI_PCORE_VER_PATCH(version)); return -ENODEV; } @@ -689,8 +649,8 @@ static int spi_engine_probe(struct platform_device *pdev) host->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); host->max_speed_hz = clk_get_rate(spi_engine->ref_clk) / 2; host->transfer_one_message = spi_engine_transfer_one_message; - host->prepare_message = spi_engine_prepare_message; - host->unprepare_message = spi_engine_unprepare_message; + host->optimize_message = spi_engine_optimize_message; + host->unoptimize_message = spi_engine_unoptimize_message; host->num_chipselect = 8; if (host->max_speed_hz == 0) diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index e709887eb2a9..e1b9b1235787 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -1117,19 +1117,6 @@ static int bcm2835_spi_prepare_message(struct spi_controller *ctlr, struct spi_device *spi = msg->spi; struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr); struct bcm2835_spidev *target = spi_get_ctldata(spi); - int ret; - - if (ctlr->can_dma) { - /* - * DMA transfers are limited to 16 bit (0 to 65535 bytes) by - * the SPI HW due to DLEN. Split up transfers (32-bit FIFO - * aligned) if the limit is exceeded. - */ - ret = spi_split_transfers_maxsize(ctlr, msg, 65532, - GFP_KERNEL | GFP_DMA); - if (ret) - return ret; - } /* * Set up clock polarity before spi_transfer_one_message() asserts @@ -1219,6 +1206,19 @@ static int bcm2835_spi_setup_dma(struct spi_controller *ctlr, return 0; } +static size_t bcm2835_spi_max_transfer_size(struct spi_device *spi) +{ + /* + * DMA transfers are limited to 16 bit (0 to 65535 bytes) by + * the SPI HW due to DLEN. Split up transfers (32-bit FIFO + * aligned) if the limit is exceeded. + */ + if (spi->controller->can_dma) + return 65532; + + return SIZE_MAX; +} + static int bcm2835_spi_setup(struct spi_device *spi) { struct spi_controller *ctlr = spi->controller; @@ -1348,6 +1348,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev) ctlr->mode_bits = BCM2835_SPI_MODE_BITS; ctlr->bits_per_word_mask = SPI_BPW_MASK(8); ctlr->num_chipselect = 3; + ctlr->max_transfer_size = bcm2835_spi_max_transfer_size; ctlr->setup = bcm2835_spi_setup; ctlr->cleanup = bcm2835_spi_cleanup; ctlr->transfer_one = bcm2835_spi_transfer_one; diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index ecd44016c197..a0e2204fc039 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -187,7 +187,7 @@ int spi_bitbang_setup(struct spi_device *spi) bool initial_setup = false; int retval; - bitbang = spi_master_get_devdata(spi->master); + bitbang = spi_controller_get_devdata(spi->controller); if (!cs) { cs = kzalloc(sizeof(*cs), GFP_KERNEL); @@ -236,7 +236,7 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) unsigned nsecs = cs->nsecs; struct spi_bitbang *bitbang; - bitbang = spi_master_get_devdata(spi->master); + bitbang = spi_controller_get_devdata(spi->controller); if (bitbang->set_line_direction) { int err; @@ -268,11 +268,11 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) * transfer-at-a-time ones to leverage dma or fifo hardware. */ -static int spi_bitbang_prepare_hardware(struct spi_master *spi) +static int spi_bitbang_prepare_hardware(struct spi_controller *spi) { struct spi_bitbang *bitbang; - bitbang = spi_master_get_devdata(spi); + bitbang = spi_controller_get_devdata(spi); mutex_lock(&bitbang->lock); bitbang->busy = 1; @@ -281,11 +281,11 @@ static int spi_bitbang_prepare_hardware(struct spi_master *spi) return 0; } -static int spi_bitbang_transfer_one(struct spi_master *master, +static int spi_bitbang_transfer_one(struct spi_controller *ctlr, struct spi_device *spi, struct spi_transfer *transfer) { - struct spi_bitbang *bitbang = spi_master_get_devdata(master); + struct spi_bitbang *bitbang = spi_controller_get_devdata(ctlr); int status = 0; if (bitbang->setup_transfer) { @@ -303,16 +303,16 @@ static int spi_bitbang_transfer_one(struct spi_master *master, status = -EREMOTEIO; out: - spi_finalize_current_transfer(master); + spi_finalize_current_transfer(ctlr); return status; } -static int spi_bitbang_unprepare_hardware(struct spi_master *spi) +static int spi_bitbang_unprepare_hardware(struct spi_controller *spi) { struct spi_bitbang *bitbang; - bitbang = spi_master_get_devdata(spi); + bitbang = spi_controller_get_devdata(spi); mutex_lock(&bitbang->lock); bitbang->busy = 0; @@ -323,7 +323,7 @@ static int spi_bitbang_unprepare_hardware(struct spi_master *spi) static void spi_bitbang_set_cs(struct spi_device *spi, bool enable) { - struct spi_bitbang *bitbang = spi_master_get_devdata(spi->master); + struct spi_bitbang *bitbang = spi_controller_get_devdata(spi->controller); /* SPI core provides CS high / low, but bitbang driver * expects CS active @@ -341,10 +341,10 @@ static void spi_bitbang_set_cs(struct spi_device *spi, bool enable) int spi_bitbang_init(struct spi_bitbang *bitbang) { - struct spi_master *master = bitbang->master; + struct spi_controller *ctlr = bitbang->ctlr; bool custom_cs; - if (!master) + if (!ctlr) return -EINVAL; /* * We only need the chipselect callback if we are actually using it. @@ -352,39 +352,39 @@ int spi_bitbang_init(struct spi_bitbang *bitbang) * SPI_CONTROLLER_GPIO_SS flag is set, we always need to call the * driver-specific chipselect routine. */ - custom_cs = (!master->use_gpio_descriptors || - (master->flags & SPI_CONTROLLER_GPIO_SS)); + custom_cs = (!ctlr->use_gpio_descriptors || + (ctlr->flags & SPI_CONTROLLER_GPIO_SS)); if (custom_cs && !bitbang->chipselect) return -EINVAL; mutex_init(&bitbang->lock); - if (!master->mode_bits) - master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags; + if (!ctlr->mode_bits) + ctlr->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags; - if (master->transfer || master->transfer_one_message) + if (ctlr->transfer || ctlr->transfer_one_message) return -EINVAL; - master->prepare_transfer_hardware = spi_bitbang_prepare_hardware; - master->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware; - master->transfer_one = spi_bitbang_transfer_one; + ctlr->prepare_transfer_hardware = spi_bitbang_prepare_hardware; + ctlr->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware; + ctlr->transfer_one = spi_bitbang_transfer_one; /* * When using GPIO descriptors, the ->set_cs() callback doesn't even * get called unless SPI_CONTROLLER_GPIO_SS is set. */ if (custom_cs) - master->set_cs = spi_bitbang_set_cs; + ctlr->set_cs = spi_bitbang_set_cs; if (!bitbang->txrx_bufs) { bitbang->use_dma = 0; bitbang->txrx_bufs = spi_bitbang_bufs; - if (!master->setup) { + if (!ctlr->setup) { if (!bitbang->setup_transfer) bitbang->setup_transfer = spi_bitbang_setup_transfer; - master->setup = spi_bitbang_setup; - master->cleanup = spi_bitbang_cleanup; + ctlr->setup = spi_bitbang_setup; + ctlr->cleanup = spi_bitbang_cleanup; } } @@ -411,18 +411,18 @@ EXPORT_SYMBOL_GPL(spi_bitbang_init); * master methods. Those methods are the defaults if the bitbang->txrx_bufs * routine isn't initialized. * - * This routine registers the spi_master, which will process requests in a + * This routine registers the spi_controller, which will process requests in a * dedicated task, keeping IRQs unblocked most of the time. To stop * processing those requests, call spi_bitbang_stop(). * - * On success, this routine will take a reference to master. The caller is - * responsible for calling spi_bitbang_stop() to decrement the reference and - * spi_master_put() as counterpart of spi_alloc_master() to prevent a memory + * On success, this routine will take a reference to the controller. The caller + * is responsible for calling spi_bitbang_stop() to decrement the reference and + * spi_controller_put() as counterpart of spi_alloc_master() to prevent a memory * leak. */ int spi_bitbang_start(struct spi_bitbang *bitbang) { - struct spi_master *master = bitbang->master; + struct spi_controller *ctlr = bitbang->ctlr; int ret; ret = spi_bitbang_init(bitbang); @@ -432,9 +432,9 @@ int spi_bitbang_start(struct spi_bitbang *bitbang) /* driver may get busy before register() returns, especially * if someone registered boardinfo for devices */ - ret = spi_register_master(spi_master_get(master)); + ret = spi_register_controller(spi_controller_get(ctlr)); if (ret) - spi_master_put(master); + spi_controller_put(ctlr); return ret; } @@ -445,7 +445,7 @@ EXPORT_SYMBOL_GPL(spi_bitbang_start); */ void spi_bitbang_stop(struct spi_bitbang *bitbang) { - spi_unregister_master(bitbang->master); + spi_unregister_controller(bitbang->ctlr); } EXPORT_SYMBOL_GPL(spi_bitbang_stop); diff --git a/drivers/spi/spi-butterfly.c b/drivers/spi/spi-butterfly.c index 289b4454242a..1d267e6c22a4 100644 --- a/drivers/spi/spi-butterfly.c +++ b/drivers/spi/spi-butterfly.c @@ -205,7 +205,7 @@ static void butterfly_attach(struct parport *p) host->bus_num = 42; host->num_chipselect = 2; - pp->bitbang.master = host; + pp->bitbang.ctlr = host; pp->bitbang.chipselect = butterfly_chipselect; pp->bitbang.txrx_word[SPI_MODE_0] = butterfly_txrx_word_mode0; @@ -263,7 +263,7 @@ static void butterfly_attach(struct parport *p) pp->info[0].platform_data = &flash; pp->info[0].chip_select = 1; pp->info[0].controller_data = pp; - pp->dataflash = spi_new_device(pp->bitbang.master, &pp->info[0]); + pp->dataflash = spi_new_device(pp->bitbang.ctlr, &pp->info[0]); if (pp->dataflash) pr_debug("%s: dataflash at %s\n", p->name, dev_name(&pp->dataflash->dev)); @@ -308,7 +308,7 @@ static void butterfly_detach(struct parport *p) parport_release(pp->pd); parport_unregister_device(pp->pd); - spi_controller_put(pp->bitbang.master); + spi_controller_put(pp->bitbang.ctlr); } static struct parport_driver butterfly_driver = { diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index 1a8d03958dff..350b3dab3a05 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -31,7 +31,9 @@ #include <linux/timer.h> #define CQSPI_NAME "cadence-qspi" -#define CQSPI_MAX_CHIPSELECT 16 +#define CQSPI_MAX_CHIPSELECT 4 + +static_assert(CQSPI_MAX_CHIPSELECT <= SPI_CS_CNT_MAX); /* Quirks */ #define CQSPI_NEEDS_WR_DELAY BIT(0) @@ -1410,7 +1412,7 @@ static int cqspi_mem_process(struct spi_mem *mem, const struct spi_mem_op *op) static int cqspi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op) { int ret; - struct cqspi_st *cqspi = spi_master_get_devdata(mem->spi->master); + struct cqspi_st *cqspi = spi_controller_get_devdata(mem->spi->controller); struct device *dev = &cqspi->pdev->dev; ret = pm_runtime_resume_and_get(dev); @@ -1619,6 +1621,7 @@ static const struct spi_controller_mem_caps cqspi_mem_caps = { static int cqspi_setup_flash(struct cqspi_st *cqspi) { + unsigned int max_cs = cqspi->num_chipselect - 1; struct platform_device *pdev = cqspi->pdev; struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; @@ -1635,10 +1638,12 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi) return ret; } - if (cs >= CQSPI_MAX_CHIPSELECT) { + if (cs >= cqspi->num_chipselect) { dev_err(dev, "Chip select %d out of range.\n", cs); of_node_put(np); return -EINVAL; + } else if (cs < max_cs) { + max_cs = cs; } f_pdata = &cqspi->f_pdata[cs]; @@ -1652,6 +1657,7 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi) } } + cqspi->num_chipselect = max_cs + 1; return 0; } @@ -1712,10 +1718,9 @@ static int cqspi_probe(struct platform_device *pdev) int irq; host = devm_spi_alloc_host(&pdev->dev, sizeof(*cqspi)); - if (!host) { - dev_err(&pdev->dev, "devm_spi_alloc_host failed\n"); + if (!host) return -ENOMEM; - } + host->mode_bits = SPI_RX_QUAD | SPI_RX_DUAL; host->mem_ops = &cqspi_mem_ops; host->mem_caps = &cqspi_mem_caps; @@ -1863,14 +1868,14 @@ static int cqspi_probe(struct platform_device *pdev) cqspi->current_cs = -1; cqspi->sclk = 0; - host->num_chipselect = cqspi->num_chipselect; - ret = cqspi_setup_flash(cqspi); if (ret) { dev_err(dev, "failed to setup flash parameters %d\n", ret); goto probe_setup_failed; } + host->num_chipselect = cqspi->num_chipselect; + if (cqspi->use_direct_mode) { ret = cqspi_request_mmap_dma(cqspi); if (ret == -EPROBE_DEFER) diff --git a/drivers/spi/spi-cavium.c b/drivers/spi/spi-cavium.c index dfe224defd6e..26b8cd1c76e1 100644 --- a/drivers/spi/spi-cavium.c +++ b/drivers/spi/spi-cavium.c @@ -124,10 +124,10 @@ static int octeon_spi_do_transfer(struct octeon_spi *p, return xfer->len; } -int octeon_spi_transfer_one_message(struct spi_master *master, +int octeon_spi_transfer_one_message(struct spi_controller *ctlr, struct spi_message *msg) { - struct octeon_spi *p = spi_master_get_devdata(master); + struct octeon_spi *p = spi_controller_get_devdata(ctlr); unsigned int total_len = 0; int status = 0; struct spi_transfer *xfer; @@ -145,6 +145,6 @@ int octeon_spi_transfer_one_message(struct spi_master *master, err: msg->status = status; msg->actual_length = total_len; - spi_finalize_current_message(master); + spi_finalize_current_message(ctlr); return status; } diff --git a/drivers/spi/spi-cavium.h b/drivers/spi/spi-cavium.h index 1f3ac463a20b..af53a0c31476 100644 --- a/drivers/spi/spi-cavium.h +++ b/drivers/spi/spi-cavium.h @@ -28,7 +28,7 @@ struct octeon_spi { #define OCTEON_SPI_TX(x) (x->regs.tx) #define OCTEON_SPI_DAT0(x) (x->regs.data) -int octeon_spi_transfer_one_message(struct spi_master *master, +int octeon_spi_transfer_one_message(struct spi_controller *ctlr, struct spi_message *msg); /* MPI register descriptions */ diff --git a/drivers/spi/spi-cs42l43.c b/drivers/spi/spi-cs42l43.c index adf19e8c4c8a..27c995b657f2 100644 --- a/drivers/spi/spi-cs42l43.c +++ b/drivers/spi/spi-cs42l43.c @@ -201,6 +201,11 @@ static size_t cs42l43_spi_max_length(struct spi_device *spi) return CS42L43_SPI_MAX_LENGTH; } +static void cs42l43_release_of_node(void *data) +{ + fwnode_handle_put(data); +} + static int cs42l43_spi_probe(struct platform_device *pdev) { struct cs42l43 *cs42l43 = dev_get_drvdata(pdev->dev.parent); @@ -227,12 +232,6 @@ static int cs42l43_spi_probe(struct platform_device *pdev) priv->ctlr->transfer_one = cs42l43_transfer_one; priv->ctlr->set_cs = cs42l43_set_cs; priv->ctlr->max_transfer_size = cs42l43_spi_max_length; - - if (is_of_node(fwnode)) - fwnode = fwnode_get_named_child_node(fwnode, "spi"); - - device_set_node(&priv->ctlr->dev, fwnode); - priv->ctlr->mode_bits = SPI_3WIRE | SPI_MODE_X_MASK; priv->ctlr->flags = SPI_CONTROLLER_HALF_DUPLEX; priv->ctlr->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16) | @@ -256,6 +255,17 @@ static int cs42l43_spi_probe(struct platform_device *pdev) regmap_write(priv->regmap, CS42L43_SPI_CONFIG3, 0); regmap_write(priv->regmap, CS42L43_SPI_CONFIG4, CS42L43_SPI_STALL_ENA_MASK); + if (is_of_node(fwnode)) { + fwnode = fwnode_get_named_child_node(fwnode, "spi"); + ret = devm_add_action(priv->dev, cs42l43_release_of_node, fwnode); + if (ret) { + fwnode_handle_put(fwnode); + return ret; + } + } + + device_set_node(&priv->ctlr->dev, fwnode); + ret = devm_spi_register_controller(priv->dev, priv->ctlr); if (ret) { dev_err(priv->dev, "Failed to register SPI controller: %d\n", ret); diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 5688be245c68..be3998104bfb 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -459,7 +459,7 @@ static bool davinci_spi_can_dma(struct spi_controller *host, static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status) { - struct device *sdev = dspi->bitbang.master->dev.parent; + struct device *sdev = dspi->bitbang.ctlr->dev.parent; if (int_status & SPIFLG_TIMEOUT_MASK) { dev_err(sdev, "SPI Time-out Error\n"); @@ -742,7 +742,7 @@ static irqreturn_t davinci_spi_irq(s32 irq, void *data) static int davinci_spi_request_dma(struct davinci_spi *dspi) { - struct device *sdev = dspi->bitbang.master->dev.parent; + struct device *sdev = dspi->bitbang.ctlr->dev.parent; dspi->dma_rx = dma_request_chan(sdev, "rx"); if (IS_ERR(dspi->dma_rx)) @@ -913,7 +913,7 @@ static int davinci_spi_probe(struct platform_device *pdev) if (ret) goto free_host; - dspi->bitbang.master = host; + dspi->bitbang.ctlr = host; dspi->clk = devm_clk_get_enabled(&pdev->dev, NULL); if (IS_ERR(dspi->clk)) { diff --git a/drivers/spi/spi-dw-dma.c b/drivers/spi/spi-dw-dma.c index 0ecbb6c36e23..f4c209e5f52b 100644 --- a/drivers/spi/spi-dw-dma.c +++ b/drivers/spi/spi-dw-dma.c @@ -577,7 +577,7 @@ static int dw_spi_dma_transfer_one(struct dw_spi *dws, sg_init_table(&tx_tmp, 1); sg_init_table(&rx_tmp, 1); - for (base = 0, len = 0; base < xfer->len; base += len) { + for (base = 0; base < xfer->len; base += len) { /* Fetch next Tx DMA data chunk */ if (!tx_len) { tx_sg = !tx_sg ? &xfer->tx_sg.sgl[0] : sg_next(tx_sg); diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index c9eae046f66c..38defdcf9370 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -502,15 +502,12 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr) return -ENOMEM; dma->chan_rx = dma_request_chan(dev, "rx"); - if (IS_ERR(dma->chan_rx)) { - return dev_err_probe(dev, PTR_ERR(dma->chan_rx), - "rx dma channel not available\n"); - } + if (IS_ERR(dma->chan_rx)) + return dev_err_probe(dev, PTR_ERR(dma->chan_rx), "rx dma channel not available\n"); dma->chan_tx = dma_request_chan(dev, "tx"); if (IS_ERR(dma->chan_tx)) { - ret = PTR_ERR(dma->chan_tx); - dev_err_probe(dev, ret, "tx dma channel not available\n"); + ret = dev_err_probe(dev, PTR_ERR(dma->chan_tx), "tx dma channel not available\n"); goto err_tx_channel; } @@ -541,16 +538,14 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr) cfg.direction = DMA_DEV_TO_MEM; ret = dmaengine_slave_config(dma->chan_rx, &cfg); if (ret) { - dev_err(dev, "can't configure rx dma channel\n"); - ret = -EINVAL; + dev_err_probe(dev, ret, "can't configure rx dma channel\n"); goto err_slave_config; } cfg.direction = DMA_MEM_TO_DEV; ret = dmaengine_slave_config(dma->chan_tx, &cfg); if (ret) { - dev_err(dev, "can't configure tx dma channel\n"); - ret = -EINVAL; + dev_err_probe(dev, ret, "can't configure tx dma channel\n"); goto err_slave_config; } diff --git a/drivers/spi/spi-fsl-lib.c b/drivers/spi/spi-fsl-lib.c index 885757c29fbb..4fc2c56555b5 100644 --- a/drivers/spi/spi-fsl-lib.c +++ b/drivers/spi/spi-fsl-lib.c @@ -82,18 +82,18 @@ void mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) { struct fsl_spi_platform_data *pdata = dev_get_platdata(dev); - struct spi_master *master; + struct spi_controller *ctlr; struct mpc8xxx_spi *mpc8xxx_spi; - master = dev_get_drvdata(dev); + ctlr = dev_get_drvdata(dev); /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH + ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST | SPI_LOOP; - master->dev.of_node = dev->of_node; + ctlr->dev.of_node = dev->of_node; - mpc8xxx_spi = spi_master_get_devdata(master); + mpc8xxx_spi = spi_controller_get_devdata(ctlr); mpc8xxx_spi->dev = dev; mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8; mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8; @@ -104,8 +104,8 @@ void mpc8xxx_spi_probe(struct device *dev, struct resource *mem, mpc8xxx_spi->rx_shift = 0; mpc8xxx_spi->tx_shift = 0; - master->bus_num = pdata->bus_num; - master->num_chipselect = pdata->max_chipselect; + ctlr->bus_num = pdata->bus_num; + ctlr->num_chipselect = pdata->max_chipselect; init_completion(&mpc8xxx_spi->done); } diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c index 15f84e68d4d2..37ef8c40b276 100644 --- a/drivers/spi/spi-geni-qcom.c +++ b/drivers/spi/spi-geni-qcom.c @@ -647,7 +647,7 @@ static void spi_geni_release_dma_chan(struct spi_geni_master *mas) static int spi_geni_init(struct spi_geni_master *mas) { - struct spi_master *spi = dev_get_drvdata(mas->dev); + struct spi_controller *spi = dev_get_drvdata(mas->dev); struct geni_se *se = &mas->se; unsigned int proto, major, minor, ver; u32 spi_tx_cfg, fifo_disable; diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index d8db4564b406..909cce109bba 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -427,7 +427,7 @@ static int spi_gpio_probe(struct platform_device *pdev) host->cleanup = spi_gpio_cleanup; bb = &spi_gpio->bitbang; - bb->master = host; + bb->ctlr = host; /* * There is some additional business, apart from driving the CS GPIO * line, that we need to do on selection. This makes the local diff --git a/drivers/spi/spi-intel.c b/drivers/spi/spi-intel.c index 3654ae35d2db..3e5dcf2b3c8a 100644 --- a/drivers/spi/spi-intel.c +++ b/drivers/spi/spi-intel.c @@ -1254,6 +1254,13 @@ static void intel_spi_fill_partition(struct intel_spi *ispi, if (end > part->size) part->size = end; } + + /* + * Regions can refer to the second chip too so in this case we + * just make the BIOS partition to occupy the whole chip. + */ + if (ispi->chip0_size && part->size > ispi->chip0_size) + part->size = MTDPART_SIZ_FULL; } static int intel_spi_read_desc(struct intel_spi *ispi) @@ -1346,9 +1353,14 @@ static int intel_spi_read_desc(struct intel_spi *ispi) static int intel_spi_populate_chip(struct intel_spi *ispi) { struct flash_platform_data *pdata; + struct mtd_partition *parts; struct spi_board_info chip; int ret; + ret = intel_spi_read_desc(ispi); + if (ret) + return ret; + pdata = devm_kzalloc(ispi->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) return -ENOMEM; @@ -1368,15 +1380,27 @@ static int intel_spi_populate_chip(struct intel_spi *ispi) if (!spi_new_device(ispi->host, &chip)) return -ENODEV; - ret = intel_spi_read_desc(ispi); - if (ret) - return ret; - /* Add the second chip if present */ if (ispi->host->num_chipselect < 2) return 0; - chip.platform_data = NULL; + pdata = devm_kzalloc(ispi->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdata->name = devm_kasprintf(ispi->dev, GFP_KERNEL, "%s-chip1", + dev_name(ispi->dev)); + pdata->nr_parts = 1; + parts = devm_kcalloc(ispi->dev, pdata->nr_parts, sizeof(*parts), + GFP_KERNEL); + if (!parts) + return -ENOMEM; + + parts[0].size = MTDPART_SIZ_FULL; + parts[0].name = "BIOS1"; + pdata->parts = parts; + + chip.platform_data = pdata; chip.chip_select = 1; if (!spi_new_device(ispi->host, &chip)) diff --git a/drivers/spi/spi-lm70llp.c b/drivers/spi/spi-lm70llp.c index e6a65b5c8c31..f982bdebd028 100644 --- a/drivers/spi/spi-lm70llp.c +++ b/drivers/spi/spi-lm70llp.c @@ -212,7 +212,7 @@ static void spi_lm70llp_attach(struct parport *p) /* * SPI and bitbang hookup. */ - pp->bitbang.master = host; + pp->bitbang.ctlr = host; pp->bitbang.chipselect = lm70_chipselect; pp->bitbang.txrx_word[SPI_MODE_0] = lm70_txrx; pp->bitbang.flags = SPI_3WIRE; @@ -264,7 +264,7 @@ static void spi_lm70llp_attach(struct parport *p) * the board info's (void *)controller_data. */ pp->info.controller_data = pp; - pp->spidev_lm70 = spi_new_device(pp->bitbang.master, &pp->info); + pp->spidev_lm70 = spi_new_device(pp->bitbang.ctlr, &pp->info); if (pp->spidev_lm70) dev_dbg(&pp->spidev_lm70->dev, "spidev_lm70 at %s\n", dev_name(&pp->spidev_lm70->dev)); @@ -309,7 +309,7 @@ static void spi_lm70llp_detach(struct parport *p) parport_release(pp->pd); parport_unregister_device(pp->pd); - spi_controller_put(pp->bitbang.master); + spi_controller_put(pp->bitbang.ctlr); lm70llp = NULL; } diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c index bbf2015d8e5c..fee8893d2751 100644 --- a/drivers/spi/spi-loopback-test.c +++ b/drivers/spi/spi-loopback-test.c @@ -1031,8 +1031,8 @@ int spi_test_run_test(struct spi_device *spi, const struct spi_test *test, #define FOR_EACH_ALIGNMENT(var) \ for (var = 0; \ var < (test->iterate_##var ? \ - (spi->master->dma_alignment ? \ - spi->master->dma_alignment : \ + (spi->controller->dma_alignment ? \ + spi->controller->dma_alignment : \ test->iterate_##var) : \ 1); \ var++) diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c index 2dc8ceb85374..c9d6d42a88f5 100644 --- a/drivers/spi/spi-mem.c +++ b/drivers/spi/spi-mem.c @@ -297,6 +297,49 @@ static void spi_mem_access_end(struct spi_mem *mem) pm_runtime_put(ctlr->dev.parent); } +static void spi_mem_add_op_stats(struct spi_statistics __percpu *pcpu_stats, + const struct spi_mem_op *op, int exec_op_ret) +{ + struct spi_statistics *stats; + u64 len, l2len; + + get_cpu(); + stats = this_cpu_ptr(pcpu_stats); + u64_stats_update_begin(&stats->syncp); + + /* + * We do not have the concept of messages or transfers. Let's consider + * that one operation is equivalent to one message and one transfer. + */ + u64_stats_inc(&stats->messages); + u64_stats_inc(&stats->transfers); + + /* Use the sum of all lengths as bytes count and histogram value. */ + len = op->cmd.nbytes + op->addr.nbytes; + len += op->dummy.nbytes + op->data.nbytes; + u64_stats_add(&stats->bytes, len); + l2len = min(fls(len), SPI_STATISTICS_HISTO_SIZE) - 1; + u64_stats_inc(&stats->transfer_bytes_histo[l2len]); + + /* Only account for data bytes as transferred bytes. */ + if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_OUT) + u64_stats_add(&stats->bytes_tx, op->data.nbytes); + if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_IN) + u64_stats_add(&stats->bytes_rx, op->data.nbytes); + + /* + * A timeout is not an error, following the same behavior as + * spi_transfer_one_message(). + */ + if (exec_op_ret == -ETIMEDOUT) + u64_stats_inc(&stats->timedout); + else if (exec_op_ret) + u64_stats_inc(&stats->errors); + + u64_stats_update_end(&stats->syncp); + put_cpu(); +} + /** * spi_mem_exec_op() - Execute a memory operation * @mem: the SPI memory @@ -339,8 +382,12 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) * read path) and expect the core to use the regular SPI * interface in other cases. */ - if (!ret || ret != -ENOTSUPP || ret != -EOPNOTSUPP) + if (!ret || ret != -ENOTSUPP || ret != -EOPNOTSUPP) { + spi_mem_add_op_stats(ctlr->pcpu_statistics, op, ret); + spi_mem_add_op_stats(mem->spi->pcpu_statistics, op, ret); + return ret; + } } tmpbufsize = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes; diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 8d5d170d49cc..8d4633b353ee 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/gpio/consumer.h> +#include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/platform_data/spi-mt65xx.h> #include <linux/pm_runtime.h> @@ -1316,6 +1317,8 @@ static int mtk_spi_suspend(struct device *dev) clk_disable_unprepare(mdata->spi_hclk); } + pinctrl_pm_select_sleep_state(dev); + return 0; } @@ -1325,6 +1328,8 @@ static int mtk_spi_resume(struct device *dev) struct spi_controller *host = dev_get_drvdata(dev); struct mtk_spi *mdata = spi_controller_get_devdata(host); + pinctrl_pm_select_default_state(dev); + if (!pm_runtime_suspended(dev)) { ret = clk_prepare_enable(mdata->spi_clk); if (ret < 0) { diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c index e13f678f2395..88397f712a3b 100644 --- a/drivers/spi/spi-nxp-fspi.c +++ b/drivers/spi/spi-nxp-fspi.c @@ -591,7 +591,7 @@ static void nxp_fspi_prepare_lut(struct nxp_fspi *f, for (i = 0; i < ARRAY_SIZE(lutval); i++) fspi_writel(f, lutval[i], base + FSPI_LUT_REG(i)); - dev_dbg(f->dev, "CMD[%x] lutval[0:%x \t 1:%x \t 2:%x \t 3:%x], size: 0x%08x\n", + dev_dbg(f->dev, "CMD[%02x] lutval[0:%08x 1:%08x 2:%08x 3:%08x], size: 0x%08x\n", op->cmd.opcode, lutval[0], lutval[1], lutval[2], lutval[3], op->data.nbytes); /* lock LUT */ diff --git a/drivers/spi/spi-oc-tiny.c b/drivers/spi/spi-oc-tiny.c index cf7c111088a6..6ea38f5e7d64 100644 --- a/drivers/spi/spi-oc-tiny.c +++ b/drivers/spi/spi-oc-tiny.c @@ -194,7 +194,7 @@ static int tiny_spi_of_probe(struct platform_device *pdev) if (!np) return 0; - hw->bitbang.master->dev.of_node = pdev->dev.of_node; + hw->bitbang.ctlr->dev.of_node = pdev->dev.of_node; if (!of_property_read_u32(np, "clock-frequency", &val)) hw->freq = val; if (!of_property_read_u32(np, "baud-width", &val)) @@ -229,7 +229,7 @@ static int tiny_spi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, hw); /* setup the state for the bitbang driver */ - hw->bitbang.master = host; + hw->bitbang.ctlr = host; hw->bitbang.setup_transfer = tiny_spi_setup_transfer; hw->bitbang.txrx_bufs = tiny_spi_txrx_bufs; @@ -274,7 +274,7 @@ exit: static void tiny_spi_remove(struct platform_device *pdev) { struct tiny_spi *hw = platform_get_drvdata(pdev); - struct spi_controller *host = hw->bitbang.master; + struct spi_controller *host = hw->bitbang.ctlr; spi_bitbang_stop(&hw->bitbang); spi_controller_put(host); diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index 2dd1c1bcf4bf..210a98d903fa 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -448,7 +448,7 @@ static void uwire_off(struct uwire_spi *uwire) { uwire_write_reg(UWIRE_SR3, 0); clk_disable_unprepare(uwire->ck); - spi_controller_put(uwire->bitbang.master); + spi_controller_put(uwire->bitbang.ctlr); } static int uwire_probe(struct platform_device *pdev) @@ -493,7 +493,7 @@ static int uwire_probe(struct platform_device *pdev) host->setup = uwire_setup; host->cleanup = uwire_cleanup; - uwire->bitbang.master = host; + uwire->bitbang.ctlr = host; uwire->bitbang.chipselect = uwire_chipselect; uwire->bitbang.setup_transfer = uwire_setup_transfer; uwire->bitbang.txrx_bufs = uwire_txrx; diff --git a/drivers/spi/spi-pci1xxxx.c b/drivers/spi/spi-pci1xxxx.c index 5b2d3e4e21b7..969965d7bc98 100644 --- a/drivers/spi/spi-pci1xxxx.c +++ b/drivers/spi/spi-pci1xxxx.c @@ -5,8 +5,15 @@ // Kumaravel Thiagarajan <Kumaravel.Thiagarajan@microchip.com> +#include <linux/bitfield.h> +#include <linux/dma-mapping.h> +#include <linux/iopoll.h> +#include <linux/irq.h> #include <linux/module.h> +#include <linux/msi.h> +#include <linux/pci_regs.h> #include <linux/pci.h> +#include <linux/spinlock.h> #include <linux/spi/spi.h> #include <linux/delay.h> @@ -32,8 +39,68 @@ #define SPI_MST_CTL_MODE_SEL (BIT(2)) #define SPI_MST_CTL_GO (BIT(0)) +#define SPI_PERI_ADDR_BASE (0x160000) +#define SPI_SYSTEM_ADDR_BASE (0x2000) #define SPI_MST1_ADDR_BASE (0x800) +#define DEV_REV_REG (SPI_SYSTEM_ADDR_BASE + 0x00) +#define SPI_SYSLOCK_REG (SPI_SYSTEM_ADDR_BASE + 0xA0) +#define SPI_CONFIG_PERI_ENABLE_REG (SPI_SYSTEM_ADDR_BASE + 0x108) + +#define SPI_PERI_ENBLE_PF_MASK (GENMASK(17, 16)) +#define DEV_REV_MASK (GENMASK(7, 0)) + +#define SPI_SYSLOCK BIT(4) +#define SPI0 (0) +#define SPI1 (1) + +/* DMA Related Registers */ +#define SPI_DMA_ADDR_BASE (0x1000) +#define SPI_DMA_GLOBAL_WR_ENGINE_EN (SPI_DMA_ADDR_BASE + 0x0C) +#define SPI_DMA_WR_DOORBELL_REG (SPI_DMA_ADDR_BASE + 0x10) +#define SPI_DMA_GLOBAL_RD_ENGINE_EN (SPI_DMA_ADDR_BASE + 0x2C) +#define SPI_DMA_RD_DOORBELL_REG (SPI_DMA_ADDR_BASE + 0x30) +#define SPI_DMA_INTR_WR_STS (SPI_DMA_ADDR_BASE + 0x4C) +#define SPI_DMA_WR_INT_MASK (SPI_DMA_ADDR_BASE + 0x54) +#define SPI_DMA_INTR_WR_CLR (SPI_DMA_ADDR_BASE + 0x58) +#define SPI_DMA_ERR_WR_STS (SPI_DMA_ADDR_BASE + 0x5C) +#define SPI_DMA_INTR_IMWR_WDONE_LOW (SPI_DMA_ADDR_BASE + 0x60) +#define SPI_DMA_INTR_IMWR_WDONE_HIGH (SPI_DMA_ADDR_BASE + 0x64) +#define SPI_DMA_INTR_IMWR_WABORT_LOW (SPI_DMA_ADDR_BASE + 0x68) +#define SPI_DMA_INTR_IMWR_WABORT_HIGH (SPI_DMA_ADDR_BASE + 0x6C) +#define SPI_DMA_INTR_WR_IMWR_DATA (SPI_DMA_ADDR_BASE + 0x70) +#define SPI_DMA_INTR_RD_STS (SPI_DMA_ADDR_BASE + 0xA0) +#define SPI_DMA_RD_INT_MASK (SPI_DMA_ADDR_BASE + 0xA8) +#define SPI_DMA_INTR_RD_CLR (SPI_DMA_ADDR_BASE + 0xAC) +#define SPI_DMA_ERR_RD_STS (SPI_DMA_ADDR_BASE + 0xB8) +#define SPI_DMA_INTR_IMWR_RDONE_LOW (SPI_DMA_ADDR_BASE + 0xCC) +#define SPI_DMA_INTR_IMWR_RDONE_HIGH (SPI_DMA_ADDR_BASE + 0xD0) +#define SPI_DMA_INTR_IMWR_RABORT_LOW (SPI_DMA_ADDR_BASE + 0xD4) +#define SPI_DMA_INTR_IMWR_RABORT_HIGH (SPI_DMA_ADDR_BASE + 0xD8) +#define SPI_DMA_INTR_RD_IMWR_DATA (SPI_DMA_ADDR_BASE + 0xDC) + +#define SPI_DMA_CH0_WR_BASE (SPI_DMA_ADDR_BASE + 0x200) +#define SPI_DMA_CH0_RD_BASE (SPI_DMA_ADDR_BASE + 0x300) +#define SPI_DMA_CH1_WR_BASE (SPI_DMA_ADDR_BASE + 0x400) +#define SPI_DMA_CH1_RD_BASE (SPI_DMA_ADDR_BASE + 0x500) + +#define SPI_DMA_CH_CTL1_OFFSET (0x00) +#define SPI_DMA_CH_XFER_LEN_OFFSET (0x08) +#define SPI_DMA_CH_SAR_LO_OFFSET (0x0C) +#define SPI_DMA_CH_SAR_HI_OFFSET (0x10) +#define SPI_DMA_CH_DAR_LO_OFFSET (0x14) +#define SPI_DMA_CH_DAR_HI_OFFSET (0x18) + +#define SPI_DMA_CH0_DONE_INT BIT(0) +#define SPI_DMA_CH1_DONE_INT BIT(1) +#define SPI_DMA_CH0_ABORT_INT BIT(16) +#define SPI_DMA_CH1_ABORT_INT BIT(17) +#define SPI_DMA_DONE_INT_MASK (SPI_DMA_CH0_DONE_INT | SPI_DMA_CH1_DONE_INT) +#define SPI_DMA_ABORT_INT_MASK (SPI_DMA_CH0_ABORT_INT | SPI_DMA_CH1_ABORT_INT) +#define DMA_CH_CONTROL_LIE BIT(3) +#define DMA_CH_CONTROL_RIE BIT(4) +#define DMA_INTR_EN (DMA_CH_CONTROL_RIE | DMA_CH_CONTROL_LIE) + /* x refers to SPI Host Controller HW instance id in the below macros - 0 or 1 */ #define SPI_MST_CMD_BUF_OFFSET(x) (((x) * SPI_MST1_ADDR_BASE) + 0x00) @@ -50,6 +117,9 @@ #define SPI_MAX_DATA_LEN 320 #define PCI1XXXX_SPI_TIMEOUT (msecs_to_jiffies(100)) +#define SYSLOCK_RETRY_CNT (1000) +#define SPI_DMA_ENGINE_EN (0x1) +#define SPI_DMA_ENGINE_DIS (0x0) #define SPI_INTR BIT(8) #define SPI_FORCE_CE BIT(4) @@ -62,11 +132,21 @@ struct pci1xxxx_spi_internal { u8 hw_inst; - bool spi_xfer_in_progress; + u8 clkdiv; int irq; + int mode; + bool spi_xfer_in_progress; + void *rx_buf; + bool dma_aborted_rd; + u32 bytes_recvd; + u32 tx_sgl_len; + u32 rx_sgl_len; + struct scatterlist *tx_sgl, *rx_sgl; + bool dma_aborted_wr; struct completion spi_xfer_done; struct spi_controller *spi_host; struct pci1xxxx_spi *parent; + struct spi_transfer *xfer; struct { unsigned int dev_sel : 3; unsigned int msi_vector_sel : 1; @@ -76,7 +156,12 @@ struct pci1xxxx_spi_internal { struct pci1xxxx_spi { struct pci_dev *dev; u8 total_hw_instances; + u8 dev_rev; void __iomem *reg_base; + void __iomem *dma_offset_bar; + /* lock to safely access the DMA registers in isr */ + spinlock_t dma_reg_lock; + bool can_dma; struct pci1xxxx_spi_internal *spi_int[] __counted_by(total_hw_instances); }; @@ -106,6 +191,114 @@ static const struct pci_device_id pci1xxxx_spi_pci_id_table[] = { MODULE_DEVICE_TABLE(pci, pci1xxxx_spi_pci_id_table); +static int pci1xxxx_set_sys_lock(struct pci1xxxx_spi *par) +{ + writel(SPI_SYSLOCK, par->reg_base + SPI_SYSLOCK_REG); + return readl(par->reg_base + SPI_SYSLOCK_REG); +} + +static int pci1xxxx_acquire_sys_lock(struct pci1xxxx_spi *par) +{ + u32 regval; + + return readx_poll_timeout(pci1xxxx_set_sys_lock, par, regval, + (regval & SPI_SYSLOCK), 100, + SYSLOCK_RETRY_CNT * 100); +} + +static void pci1xxxx_release_sys_lock(struct pci1xxxx_spi *par) +{ + writel(0x0, par->reg_base + SPI_SYSLOCK_REG); +} + +static int pci1xxxx_check_spi_can_dma(struct pci1xxxx_spi *spi_bus, int irq) +{ + struct pci_dev *pdev = spi_bus->dev; + u32 pf_num; + u32 regval; + int ret; + + /* + * DEV REV Registers is a system register, HW Syslock bit + * should be acquired before accessing the register + */ + ret = pci1xxxx_acquire_sys_lock(spi_bus); + if (ret) { + dev_err(&pdev->dev, "Error failed to acquire syslock\n"); + return ret; + } + + regval = readl(spi_bus->reg_base + DEV_REV_REG); + spi_bus->dev_rev = regval & DEV_REV_MASK; + if (spi_bus->dev_rev >= 0xC0) { + regval = readl(spi_bus->reg_base + + SPI_CONFIG_PERI_ENABLE_REG); + pf_num = regval & SPI_PERI_ENBLE_PF_MASK; + } + + pci1xxxx_release_sys_lock(spi_bus); + + /* + * DMA is supported only from C0 and SPI can use DMA only if + * it is mapped to PF0 + */ + if (spi_bus->dev_rev < 0xC0 || pf_num) + return -EOPNOTSUPP; + + /* + * DMA Supported only with MSI Interrupts + * One of the SPI instance's MSI vector address and data + * is used for DMA Interrupt + */ + if (!irq_get_msi_desc(irq)) { + dev_warn(&pdev->dev, "Error MSI Interrupt not supported, will operate in PIO mode\n"); + return -EOPNOTSUPP; + } + + spi_bus->dma_offset_bar = pcim_iomap(pdev, 2, pci_resource_len(pdev, 2)); + if (!spi_bus->dma_offset_bar) { + dev_warn(&pdev->dev, "Error failed to map dma bar, will operate in PIO mode\n"); + return -EOPNOTSUPP; + } + + if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64))) { + dev_warn(&pdev->dev, "Error failed to set DMA mask, will operate in PIO mode\n"); + pcim_iounmap(pdev, spi_bus->dma_offset_bar); + spi_bus->dma_offset_bar = NULL; + return -EOPNOTSUPP; + } + + return 0; +} + +static int pci1xxxx_spi_dma_init(struct pci1xxxx_spi *spi_bus, int irq) +{ + struct msi_msg msi; + int ret; + + ret = pci1xxxx_check_spi_can_dma(spi_bus, irq); + if (ret) + return ret; + + spin_lock_init(&spi_bus->dma_reg_lock); + get_cached_msi_msg(irq, &msi); + writel(SPI_DMA_ENGINE_EN, spi_bus->dma_offset_bar + SPI_DMA_GLOBAL_WR_ENGINE_EN); + writel(SPI_DMA_ENGINE_EN, spi_bus->dma_offset_bar + SPI_DMA_GLOBAL_RD_ENGINE_EN); + writel(msi.address_hi, spi_bus->dma_offset_bar + SPI_DMA_INTR_IMWR_WDONE_HIGH); + writel(msi.address_hi, spi_bus->dma_offset_bar + SPI_DMA_INTR_IMWR_WABORT_HIGH); + writel(msi.address_hi, spi_bus->dma_offset_bar + SPI_DMA_INTR_IMWR_RDONE_HIGH); + writel(msi.address_hi, spi_bus->dma_offset_bar + SPI_DMA_INTR_IMWR_RABORT_HIGH); + writel(msi.address_lo, spi_bus->dma_offset_bar + SPI_DMA_INTR_IMWR_WDONE_LOW); + writel(msi.address_lo, spi_bus->dma_offset_bar + SPI_DMA_INTR_IMWR_WABORT_LOW); + writel(msi.address_lo, spi_bus->dma_offset_bar + SPI_DMA_INTR_IMWR_RDONE_LOW); + writel(msi.address_lo, spi_bus->dma_offset_bar + SPI_DMA_INTR_IMWR_RABORT_LOW); + writel(msi.data, spi_bus->dma_offset_bar + SPI_DMA_INTR_WR_IMWR_DATA); + writel(msi.data, spi_bus->dma_offset_bar + SPI_DMA_INTR_RD_IMWR_DATA); + dma_set_max_seg_size(&spi_bus->dev->dev, PCI1XXXX_SPI_BUFFER_SIZE); + spi_bus->can_dma = true; + return 0; +} + static void pci1xxxx_spi_set_cs(struct spi_device *spi, bool enable) { struct pci1xxxx_spi_internal *p = spi_controller_get_devdata(spi->controller); @@ -146,12 +339,79 @@ static u8 pci1xxxx_get_clock_div(u32 hz) return val; } -static int pci1xxxx_spi_transfer_one(struct spi_controller *spi_ctlr, - struct spi_device *spi, struct spi_transfer *xfer) +static void pci1xxxx_spi_setup_dma_to_io(struct pci1xxxx_spi_internal *p, + dma_addr_t dma_addr, u32 len) +{ + void __iomem *base; + + if (!p->hw_inst) + base = p->parent->dma_offset_bar + SPI_DMA_CH0_RD_BASE; + else + base = p->parent->dma_offset_bar + SPI_DMA_CH1_RD_BASE; + + writel(DMA_INTR_EN, base + SPI_DMA_CH_CTL1_OFFSET); + writel(len, base + SPI_DMA_CH_XFER_LEN_OFFSET); + writel(lower_32_bits(dma_addr), base + SPI_DMA_CH_SAR_LO_OFFSET); + writel(upper_32_bits(dma_addr), base + SPI_DMA_CH_SAR_HI_OFFSET); + /* Updated SPI Command Registers */ + writel(lower_32_bits(SPI_PERI_ADDR_BASE + SPI_MST_CMD_BUF_OFFSET(p->hw_inst)), + base + SPI_DMA_CH_DAR_LO_OFFSET); + writel(upper_32_bits(SPI_PERI_ADDR_BASE + SPI_MST_CMD_BUF_OFFSET(p->hw_inst)), + base + SPI_DMA_CH_DAR_HI_OFFSET); +} + +static void pci1xxxx_spi_setup_dma_from_io(struct pci1xxxx_spi_internal *p, + dma_addr_t dma_addr, u32 len) +{ + void *base; + + if (!p->hw_inst) + base = p->parent->dma_offset_bar + SPI_DMA_CH0_WR_BASE; + else + base = p->parent->dma_offset_bar + SPI_DMA_CH1_WR_BASE; + + writel(DMA_INTR_EN, base + SPI_DMA_CH_CTL1_OFFSET); + writel(len, base + SPI_DMA_CH_XFER_LEN_OFFSET); + writel(lower_32_bits(dma_addr), base + SPI_DMA_CH_DAR_LO_OFFSET); + writel(upper_32_bits(dma_addr), base + SPI_DMA_CH_DAR_HI_OFFSET); + writel(lower_32_bits(SPI_PERI_ADDR_BASE + SPI_MST_RSP_BUF_OFFSET(p->hw_inst)), + base + SPI_DMA_CH_SAR_LO_OFFSET); + writel(upper_32_bits(SPI_PERI_ADDR_BASE + SPI_MST_RSP_BUF_OFFSET(p->hw_inst)), + base + SPI_DMA_CH_SAR_HI_OFFSET); +} + +static void pci1xxxx_spi_setup(struct pci1xxxx_spi *par, u8 hw_inst, u32 mode, + u8 clkdiv, u32 len) +{ + u32 regval; + + regval = readl(par->reg_base + SPI_MST_CTL_REG_OFFSET(hw_inst)); + regval &= ~(SPI_MST_CTL_MODE_SEL | SPI_MST_CTL_CMD_LEN_MASK | + SPI_MST_CTL_SPEED_MASK); + + if (mode == SPI_MODE_3) + regval |= SPI_MST_CTL_MODE_SEL; + + regval |= FIELD_PREP(SPI_MST_CTL_CMD_LEN_MASK, len); + regval |= FIELD_PREP(SPI_MST_CTL_SPEED_MASK, clkdiv); + writel(regval, par->reg_base + SPI_MST_CTL_REG_OFFSET(hw_inst)); +} + +static void pci1xxxx_start_spi_xfer(struct pci1xxxx_spi_internal *p, u8 hw_inst) +{ + u32 regval; + + regval = readl(p->parent->reg_base + SPI_MST_CTL_REG_OFFSET(hw_inst)); + regval |= SPI_MST_CTL_GO; + writel(regval, p->parent->reg_base + SPI_MST_CTL_REG_OFFSET(hw_inst)); +} + +static int pci1xxxx_spi_transfer_with_io(struct spi_controller *spi_ctlr, + struct spi_device *spi, struct spi_transfer *xfer) { struct pci1xxxx_spi_internal *p = spi_controller_get_devdata(spi_ctlr); - int mode, len, loop_iter, transfer_len; struct pci1xxxx_spi *par = p->parent; + int len, loop_iter, transfer_len; unsigned long bytes_transfered; unsigned long bytes_recvd; unsigned long loop_count; @@ -161,7 +421,7 @@ static int pci1xxxx_spi_transfer_one(struct spi_controller *spi_ctlr, u8 clkdiv; p->spi_xfer_in_progress = true; - mode = spi->mode; + p->bytes_recvd = 0; clkdiv = pci1xxxx_get_clock_div(xfer->speed_hz); tx_buf = xfer->tx_buf; rx_buf = xfer->rx_buf; @@ -186,26 +446,8 @@ static int pci1xxxx_spi_transfer_one(struct spi_controller *spi_ctlr, memcpy_toio(par->reg_base + SPI_MST_CMD_BUF_OFFSET(p->hw_inst), &tx_buf[bytes_transfered], len); bytes_transfered += len; - regval = readl(par->reg_base + - SPI_MST_CTL_REG_OFFSET(p->hw_inst)); - regval &= ~(SPI_MST_CTL_MODE_SEL | SPI_MST_CTL_CMD_LEN_MASK | - SPI_MST_CTL_SPEED_MASK); - - if (mode == SPI_MODE_3) - regval |= SPI_MST_CTL_MODE_SEL; - else - regval &= ~SPI_MST_CTL_MODE_SEL; - - regval |= (clkdiv << 5); - regval &= ~SPI_MST_CTL_CMD_LEN_MASK; - regval |= (len << 8); - writel(regval, par->reg_base + - SPI_MST_CTL_REG_OFFSET(p->hw_inst)); - regval = readl(par->reg_base + - SPI_MST_CTL_REG_OFFSET(p->hw_inst)); - regval |= SPI_MST_CTL_GO; - writel(regval, par->reg_base + - SPI_MST_CTL_REG_OFFSET(p->hw_inst)); + pci1xxxx_spi_setup(par, p->hw_inst, spi->mode, clkdiv, len); + pci1xxxx_start_spi_xfer(p, p->hw_inst); /* Wait for DMA_TERM interrupt */ result = wait_for_completion_timeout(&p->spi_xfer_done, @@ -225,7 +467,113 @@ static int pci1xxxx_spi_transfer_one(struct spi_controller *spi_ctlr, return 0; } -static irqreturn_t pci1xxxx_spi_isr(int irq, void *dev) +static int pci1xxxx_spi_transfer_with_dma(struct spi_controller *spi_ctlr, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct pci1xxxx_spi_internal *p = spi_controller_get_devdata(spi_ctlr); + struct pci1xxxx_spi *par = p->parent; + dma_addr_t rx_dma_addr = 0; + dma_addr_t tx_dma_addr = 0; + int ret = 0; + u32 regval; + + p->spi_xfer_in_progress = true; + p->tx_sgl = xfer->tx_sg.sgl; + p->rx_sgl = xfer->rx_sg.sgl; + p->rx_buf = xfer->rx_buf; + regval = readl(par->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + writel(regval, par->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + + if (!xfer->tx_buf || !p->tx_sgl) { + ret = -EINVAL; + goto error; + } + p->xfer = xfer; + p->mode = spi->mode; + p->clkdiv = pci1xxxx_get_clock_div(xfer->speed_hz); + p->bytes_recvd = 0; + p->rx_buf = xfer->rx_buf; + regval = readl(par->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + writel(regval, par->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + + tx_dma_addr = sg_dma_address(p->tx_sgl); + rx_dma_addr = sg_dma_address(p->rx_sgl); + p->tx_sgl_len = sg_dma_len(p->tx_sgl); + p->rx_sgl_len = sg_dma_len(p->rx_sgl); + pci1xxxx_spi_setup(par, p->hw_inst, p->mode, p->clkdiv, p->tx_sgl_len); + pci1xxxx_spi_setup_dma_to_io(p, (tx_dma_addr), p->tx_sgl_len); + if (rx_dma_addr) + pci1xxxx_spi_setup_dma_from_io(p, rx_dma_addr, p->rx_sgl_len); + writel(p->hw_inst, par->dma_offset_bar + SPI_DMA_RD_DOORBELL_REG); + + reinit_completion(&p->spi_xfer_done); + /* Wait for DMA_TERM interrupt */ + ret = wait_for_completion_timeout(&p->spi_xfer_done, PCI1XXXX_SPI_TIMEOUT); + if (!ret) { + ret = -ETIMEDOUT; + if (p->dma_aborted_rd) { + writel(SPI_DMA_ENGINE_DIS, + par->dma_offset_bar + SPI_DMA_GLOBAL_RD_ENGINE_EN); + /* + * DMA ENGINE reset takes time if any TLP + * completeion in progress, should wait + * till DMA Engine reset is completed. + */ + ret = readl_poll_timeout(par->dma_offset_bar + + SPI_DMA_GLOBAL_RD_ENGINE_EN, regval, + (regval == 0x0), 0, USEC_PER_MSEC); + if (ret) { + ret = -ECANCELED; + goto error; + } + writel(SPI_DMA_ENGINE_EN, + par->dma_offset_bar + SPI_DMA_GLOBAL_RD_ENGINE_EN); + p->dma_aborted_rd = false; + ret = -ECANCELED; + } + if (p->dma_aborted_wr) { + writel(SPI_DMA_ENGINE_DIS, + par->dma_offset_bar + SPI_DMA_GLOBAL_WR_ENGINE_EN); + + /* + * DMA ENGINE reset takes time if any TLP + * completeion in progress, should wait + * till DMA Engine reset is completed. + */ + ret = readl_poll_timeout(par->dma_offset_bar + + SPI_DMA_GLOBAL_WR_ENGINE_EN, regval, + (regval == 0x0), 0, USEC_PER_MSEC); + if (ret) { + ret = -ECANCELED; + goto error; + } + + writel(SPI_DMA_ENGINE_EN, + par->dma_offset_bar + SPI_DMA_GLOBAL_WR_ENGINE_EN); + p->dma_aborted_wr = false; + ret = -ECANCELED; + } + goto error; + } + ret = 0; + +error: + p->spi_xfer_in_progress = false; + + return ret; +} + +static int pci1xxxx_spi_transfer_one(struct spi_controller *spi_ctlr, + struct spi_device *spi, struct spi_transfer *xfer) +{ + if (spi_ctlr->can_dma(spi_ctlr, spi, xfer) && spi_ctlr->cur_msg_mapped) + return pci1xxxx_spi_transfer_with_dma(spi_ctlr, spi, xfer); + else + return pci1xxxx_spi_transfer_with_io(spi_ctlr, spi, xfer); +} + +static irqreturn_t pci1xxxx_spi_isr_io(int irq, void *dev) { struct pci1xxxx_spi_internal *p = dev; irqreturn_t spi_int_fired = IRQ_NONE; @@ -235,15 +583,117 @@ static irqreturn_t pci1xxxx_spi_isr(int irq, void *dev) regval = readl(p->parent->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); if (regval & SPI_INTR) { /* Clear xfer_done */ + if (p->parent->can_dma && p->rx_buf) + writel(p->hw_inst, p->parent->dma_offset_bar + + SPI_DMA_WR_DOORBELL_REG); + else + complete(&p->parent->spi_int[p->hw_inst]->spi_xfer_done); + spi_int_fired = IRQ_HANDLED; + } + writel(regval, p->parent->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + return spi_int_fired; +} + +static void pci1xxxx_spi_setup_next_dma_transfer(struct pci1xxxx_spi_internal *p) +{ + dma_addr_t tx_dma_addr = 0; + dma_addr_t rx_dma_addr = 0; + u32 prev_len; + + p->tx_sgl = sg_next(p->tx_sgl); + if (p->rx_sgl) + p->rx_sgl = sg_next(p->rx_sgl); + if (!p->tx_sgl) { + /* Clear xfer_done */ complete(&p->spi_xfer_done); + } else { + tx_dma_addr = sg_dma_address(p->tx_sgl); + prev_len = p->tx_sgl_len; + p->tx_sgl_len = sg_dma_len(p->tx_sgl); + if (prev_len != p->tx_sgl_len) + pci1xxxx_spi_setup(p->parent, + p->hw_inst, p->mode, p->clkdiv, p->tx_sgl_len); + pci1xxxx_spi_setup_dma_to_io(p, tx_dma_addr, p->tx_sgl_len); + if (p->rx_sgl) { + rx_dma_addr = sg_dma_address(p->rx_sgl); + p->rx_sgl_len = sg_dma_len(p->rx_sgl); + pci1xxxx_spi_setup_dma_from_io(p, rx_dma_addr, p->rx_sgl_len); + } + writel(p->hw_inst, p->parent->dma_offset_bar + SPI_DMA_RD_DOORBELL_REG); + } +} + +static irqreturn_t pci1xxxx_spi_isr_dma(int irq, void *dev) +{ + struct pci1xxxx_spi_internal *p = dev; + irqreturn_t spi_int_fired = IRQ_NONE; + unsigned long flags; + u32 regval; + + spin_lock_irqsave(&p->parent->dma_reg_lock, flags); + /* Clear the DMA RD INT and start spi xfer*/ + regval = readl(p->parent->dma_offset_bar + SPI_DMA_INTR_RD_STS); + if (regval & SPI_DMA_DONE_INT_MASK) { + if (regval & SPI_DMA_CH0_DONE_INT) + pci1xxxx_start_spi_xfer(p, SPI0); + if (regval & SPI_DMA_CH1_DONE_INT) + pci1xxxx_start_spi_xfer(p, SPI1); + spi_int_fired = IRQ_HANDLED; + } + if (regval & SPI_DMA_ABORT_INT_MASK) { + p->dma_aborted_rd = true; spi_int_fired = IRQ_HANDLED; } + writel(regval, p->parent->dma_offset_bar + SPI_DMA_INTR_RD_CLR); - writel(regval, p->parent->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + /* Clear the DMA WR INT */ + regval = readl(p->parent->dma_offset_bar + SPI_DMA_INTR_WR_STS); + if (regval & SPI_DMA_DONE_INT_MASK) { + if (regval & SPI_DMA_CH0_DONE_INT) + pci1xxxx_spi_setup_next_dma_transfer(p->parent->spi_int[SPI0]); + if (regval & SPI_DMA_CH1_DONE_INT) + pci1xxxx_spi_setup_next_dma_transfer(p->parent->spi_int[SPI1]); + + spi_int_fired = IRQ_HANDLED; + } + if (regval & SPI_DMA_ABORT_INT_MASK) { + p->dma_aborted_wr = true; + spi_int_fired = IRQ_HANDLED; + } + writel(regval, p->parent->dma_offset_bar + SPI_DMA_INTR_WR_CLR); + spin_unlock_irqrestore(&p->parent->dma_reg_lock, flags); + + /* Clear the SPI GO_BIT Interrupt */ + regval = readl(p->parent->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); + if (regval & SPI_INTR) { + writel(p->hw_inst, p->parent->dma_offset_bar + SPI_DMA_WR_DOORBELL_REG); + spi_int_fired = IRQ_HANDLED; + } + writel(regval, p->parent->reg_base + SPI_MST_EVENT_REG_OFFSET(p->hw_inst)); return spi_int_fired; } +static irqreturn_t pci1xxxx_spi_isr(int irq, void *dev) +{ + struct pci1xxxx_spi_internal *p = dev; + + if (p->spi_host->can_dma(p->spi_host, NULL, p->xfer)) + return pci1xxxx_spi_isr_dma(irq, dev); + else + return pci1xxxx_spi_isr_io(irq, dev); +} + +static bool pci1xxxx_spi_can_dma(struct spi_controller *host, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct pci1xxxx_spi_internal *p = spi_controller_get_devdata(host); + struct pci1xxxx_spi *par = p->parent; + + return par->can_dma; +} + static int pci1xxxx_spi_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { u8 hw_inst_cnt, iter, start, only_sec_inst; @@ -324,6 +774,10 @@ static int pci1xxxx_spi_probe(struct pci_dev *pdev, const struct pci_device_id * goto error; } + ret = pci1xxxx_spi_dma_init(spi_bus, spi_sub_ptr->irq); + if (ret && ret != -EOPNOTSUPP) + goto error; + /* This register is only applicable for 1st instance */ regval = readl(spi_bus->reg_base + SPI_PCI_CTRL_REG_OFFSET(0)); if (!only_sec_inst) @@ -360,7 +814,9 @@ static int pci1xxxx_spi_probe(struct pci_dev *pdev, const struct pci_device_id * spi_host->num_chipselect = SPI_CHIP_SEL_COUNT; spi_host->mode_bits = SPI_MODE_0 | SPI_MODE_3 | SPI_RX_DUAL | SPI_TX_DUAL | SPI_LOOP; + spi_host->can_dma = pci1xxxx_spi_can_dma; spi_host->transfer_one = pci1xxxx_spi_transfer_one; + spi_host->set_cs = pci1xxxx_spi_set_cs; spi_host->bits_per_word_mask = SPI_BPW_MASK(8); spi_host->max_speed_hz = PCI1XXXX_SPI_MAX_CLOCK_HZ; diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c index f55b38c577e4..709edb70ad7d 100644 --- a/drivers/spi/spi-pic32.c +++ b/drivers/spi/spi-pic32.c @@ -11,13 +11,13 @@ #include <linux/delay.h> #include <linux/dmaengine.h> #include <linux/dma-mapping.h> +#include <linux/gpio/consumer.h> #include <linux/highmem.h> #include <linux/module.h> #include <linux/io.h> #include <linux/interrupt.h> #include <linux/of.h> #include <linux/of_irq.h> -#include <linux/of_gpio.h> #include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c index 82d6264841fc..942c3117ab3a 100644 --- a/drivers/spi/spi-ppc4xx.c +++ b/drivers/spi/spi-ppc4xx.c @@ -359,22 +359,22 @@ static int spi_ppc4xx_of_probe(struct platform_device *op) /* Setup the state for the bitbang driver */ bbp = &hw->bitbang; - bbp->master = hw->host; + bbp->ctlr = hw->host; bbp->setup_transfer = spi_ppc4xx_setupxfer; bbp->txrx_bufs = spi_ppc4xx_txrx; bbp->use_dma = 0; - bbp->master->setup = spi_ppc4xx_setup; - bbp->master->cleanup = spi_ppc4xx_cleanup; - bbp->master->bits_per_word_mask = SPI_BPW_MASK(8); - bbp->master->use_gpio_descriptors = true; + bbp->ctlr->setup = spi_ppc4xx_setup; + bbp->ctlr->cleanup = spi_ppc4xx_cleanup; + bbp->ctlr->bits_per_word_mask = SPI_BPW_MASK(8); + bbp->ctlr->use_gpio_descriptors = true; /* * The SPI core will count the number of GPIO descriptors to figure * out the number of chip selects available on the platform. */ - bbp->master->num_chipselect = 0; + bbp->ctlr->num_chipselect = 0; /* the spi->mode bits understood by this driver: */ - bbp->master->mode_bits = + bbp->ctlr->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST; /* Get the clock for the OPB */ diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 4b9669da2cf3..e1ecd96c7858 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -160,8 +160,7 @@ */ #define ROCKCHIP_SPI_MAX_TRANLEN 0xffff -/* 2 for native cs, 2 for cs-gpio */ -#define ROCKCHIP_SPI_MAX_CS_NUM 4 +#define ROCKCHIP_SPI_MAX_NATIVE_CS_NUM 2 #define ROCKCHIP_SPI_VER2_TYPE1 0x05EC0002 #define ROCKCHIP_SPI_VER2_TYPE2 0x00110002 @@ -192,8 +191,6 @@ struct rockchip_spi { u8 n_bytes; u8 rsd; - bool cs_asserted[ROCKCHIP_SPI_MAX_CS_NUM]; - bool target_abort; bool cs_inactive; /* spi target tansmition stop when cs inactive */ bool cs_high_supported; /* native CS supports active-high polarity */ @@ -245,10 +242,6 @@ static void rockchip_spi_set_cs(struct spi_device *spi, bool enable) struct rockchip_spi *rs = spi_controller_get_devdata(ctlr); bool cs_asserted = spi->mode & SPI_CS_HIGH ? enable : !enable; - /* Return immediately for no-op */ - if (cs_asserted == rs->cs_asserted[spi_get_chipselect(spi, 0)]) - return; - if (cs_asserted) { /* Keep things powered as long as CS is asserted */ pm_runtime_get_sync(rs->dev); @@ -268,8 +261,6 @@ static void rockchip_spi_set_cs(struct spi_device *spi, bool enable) /* Drop reference from when we first asserted CS */ pm_runtime_put(rs->dev); } - - rs->cs_asserted[spi_get_chipselect(spi, 0)] = cs_asserted; } static void rockchip_spi_handle_err(struct spi_controller *ctlr, @@ -847,7 +838,7 @@ static int rockchip_spi_probe(struct platform_device *pdev) ctlr->target_abort = rockchip_spi_target_abort; } else { ctlr->flags = SPI_CONTROLLER_GPIO_SS; - ctlr->max_native_cs = ROCKCHIP_SPI_MAX_CS_NUM; + ctlr->max_native_cs = ROCKCHIP_SPI_MAX_NATIVE_CS_NUM; /* * rk spi0 has two native cs, spi1..5 one cs only * if num-cs is missing in the dts, default to 1 diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 0e48ffd499b9..9fcbe040cb2f 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -3,19 +3,22 @@ // Copyright (c) 2009 Samsung Electronics Co., Ltd. // Jaswinder Singh <jassi.brar@samsung.com> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/bits.h> #include <linux/clk.h> +#include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_data/spi-s3c64xx.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/spi/spi.h> -#include <linux/of.h> - -#include <linux/platform_data/spi-s3c64xx.h> +#include <linux/types.h> #define MAX_SPI_PORTS 12 #define S3C64XX_SPI_QUIRK_CS_AUTO (1 << 1) @@ -76,6 +79,9 @@ #define S3C64XX_SPI_INT_RX_FIFORDY_EN (1<<1) #define S3C64XX_SPI_INT_TX_FIFORDY_EN (1<<0) +#define S3C64XX_SPI_ST_RX_FIFO_RDY_V2 GENMASK(23, 15) +#define S3C64XX_SPI_ST_TX_FIFO_RDY_V2 GENMASK(14, 6) +#define S3C64XX_SPI_ST_TX_FIFO_LVL_SHIFT 6 #define S3C64XX_SPI_ST_RX_OVERRUN_ERR (1<<5) #define S3C64XX_SPI_ST_RX_UNDERRUN_ERR (1<<4) #define S3C64XX_SPI_ST_TX_OVERRUN_ERR (1<<3) @@ -106,15 +112,15 @@ #define FIFO_LVL_MASK(i) ((i)->port_conf->fifo_lvl_mask[i->port_id]) #define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & \ (1 << (i)->port_conf->tx_st_done)) ? 1 : 0) -#define TX_FIFO_LVL(v, i) (((v) >> 6) & FIFO_LVL_MASK(i)) -#define RX_FIFO_LVL(v, i) (((v) >> (i)->port_conf->rx_lvl_offset) & \ - FIFO_LVL_MASK(i)) +#define TX_FIFO_LVL(v, sdd) (((v) & (sdd)->tx_fifomask) >> \ + __ffs((sdd)->tx_fifomask)) +#define RX_FIFO_LVL(v, sdd) (((v) & (sdd)->rx_fifomask) >> \ + __ffs((sdd)->rx_fifomask)) +#define FIFO_DEPTH(i) ((FIFO_LVL_MASK(i) >> 1) + 1) #define S3C64XX_SPI_MAX_TRAILCNT 0x3ff #define S3C64XX_SPI_TRAILCNT_OFF 19 -#define S3C64XX_SPI_TRAILCNT S3C64XX_SPI_MAX_TRAILCNT - #define S3C64XX_SPI_POLLING_SIZE 32 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) @@ -131,8 +137,13 @@ struct s3c64xx_spi_dma_data { /** * struct s3c64xx_spi_port_config - SPI Controller hardware info - * @fifo_lvl_mask: Bit-mask for {TX|RX}_FIFO_LVL bits in SPI_STATUS register. - * @rx_lvl_offset: Bit offset of RX_FIFO_LVL bits in SPI_STATUS regiter. + * @fifo_lvl_mask: [DEPRECATED] use @{rx, tx}_fifomask instead. + * @rx_lvl_offset: [DEPRECATED] use @{rx,tx}_fifomask instead. + * @fifo_depth: depth of the FIFO. + * @rx_fifomask: SPI_STATUS.RX_FIFO_LVL mask. Shifted mask defining the field's + * length and position. + * @tx_fifomask: SPI_STATUS.TX_FIFO_LVL mask. Shifted mask defining the field's + * length and position. * @tx_st_done: Bit offset of TX_DONE bit in SPI_STATUS regiter. * @clk_div: Internal clock divider * @quirks: Bitmask of known quirks @@ -141,6 +152,7 @@ struct s3c64xx_spi_dma_data { * prescaler unit. * @clk_ioclk: True if clock is present on this device * @has_loopback: True if loopback mode can be supported + * @use_32bit_io: True if the SoC allows only 32-bit register accesses. * * The Samsung s3c64xx SPI controller are used on various Samsung SoC's but * differ in some aspects such as the size of the fifo and spi bus clock @@ -150,6 +162,9 @@ struct s3c64xx_spi_dma_data { struct s3c64xx_spi_port_config { int fifo_lvl_mask[MAX_SPI_PORTS]; int rx_lvl_offset; + unsigned int fifo_depth; + u32 rx_fifomask; + u32 tx_fifomask; int tx_st_done; int quirks; int clk_div; @@ -157,6 +172,7 @@ struct s3c64xx_spi_port_config { bool clk_from_cmu; bool clk_ioclk; bool has_loopback; + bool use_32bit_io; }; /** @@ -177,8 +193,13 @@ struct s3c64xx_spi_port_config { * @cur_speed: Current clock speed * @rx_dma: Local receive DMA data (e.g. chan and direction) * @tx_dma: Local transmit DMA data (e.g. chan and direction) - * @port_conf: Local SPI port configuartion data - * @port_id: Port identification number + * @port_conf: Local SPI port configuration data + * @port_id: [DEPRECATED] use @{rx,tx}_fifomask instead. + * @fifo_depth: depth of the FIFO. + * @rx_fifomask: SPI_STATUS.RX_FIFO_LVL mask. Shifted mask defining the field's + * length and position. + * @tx_fifomask: SPI_STATUS.TX_FIFO_LVL mask. Shifted mask defining the field's + * length and position. */ struct s3c64xx_spi_driver_data { void __iomem *regs; @@ -198,6 +219,9 @@ struct s3c64xx_spi_driver_data { struct s3c64xx_spi_dma_data tx_dma; const struct s3c64xx_spi_port_config *port_conf; unsigned int port_id; + unsigned int fifo_depth; + u32 rx_fifomask; + u32 tx_fifomask; }; static void s3c64xx_flush_fifo(struct s3c64xx_spi_driver_data *sdd) @@ -276,8 +300,8 @@ static void s3c64xx_spi_dmacb(void *data) spin_unlock_irqrestore(&sdd->lock, flags); } -static int prepare_dma(struct s3c64xx_spi_dma_data *dma, - struct sg_table *sgt) +static int s3c64xx_prepare_dma(struct s3c64xx_spi_dma_data *dma, + struct sg_table *sgt) { struct s3c64xx_spi_driver_data *sdd; struct dma_slave_config config; @@ -289,20 +313,20 @@ static int prepare_dma(struct s3c64xx_spi_dma_data *dma, if (dma->direction == DMA_DEV_TO_MEM) { sdd = container_of((void *)dma, struct s3c64xx_spi_driver_data, rx_dma); - config.direction = dma->direction; config.src_addr = sdd->sfr_start + S3C64XX_SPI_RX_DATA; config.src_addr_width = sdd->cur_bpw / 8; config.src_maxburst = 1; - dmaengine_slave_config(dma->ch, &config); } else { sdd = container_of((void *)dma, struct s3c64xx_spi_driver_data, tx_dma); - config.direction = dma->direction; config.dst_addr = sdd->sfr_start + S3C64XX_SPI_TX_DATA; config.dst_addr_width = sdd->cur_bpw / 8; config.dst_maxburst = 1; - dmaengine_slave_config(dma->ch, &config); } + config.direction = dma->direction; + ret = dmaengine_slave_config(dma->ch, &config); + if (ret) + return ret; desc = dmaengine_prep_slave_sg(dma->ch, sgt->sgl, sgt->nents, dma->direction, DMA_PREP_INTERRUPT); @@ -319,7 +343,7 @@ static int prepare_dma(struct s3c64xx_spi_dma_data *dma, ret = dma_submit_error(dma->cookie); if (ret) { dev_err(&sdd->pdev->dev, "DMA submission failed"); - return -EIO; + return ret; } dma_async_issue_pending(dma->ch); @@ -405,12 +429,60 @@ static bool s3c64xx_spi_can_dma(struct spi_controller *host, { struct s3c64xx_spi_driver_data *sdd = spi_controller_get_devdata(host); - if (sdd->rx_dma.ch && sdd->tx_dma.ch) { - return xfer->len > (FIFO_LVL_MASK(sdd) >> 1) + 1; - } else { - return false; + if (sdd->rx_dma.ch && sdd->tx_dma.ch) + return xfer->len > sdd->fifo_depth; + + return false; +} + +static void s3c64xx_iowrite8_32_rep(volatile void __iomem *addr, + const void *buffer, unsigned int count) +{ + if (count) { + const u8 *buf = buffer; + + do { + __raw_writel(*buf++, addr); + } while (--count); } +} +static void s3c64xx_iowrite16_32_rep(volatile void __iomem *addr, + const void *buffer, unsigned int count) +{ + if (count) { + const u16 *buf = buffer; + + do { + __raw_writel(*buf++, addr); + } while (--count); + } +} + +static void s3c64xx_iowrite_rep(const struct s3c64xx_spi_driver_data *sdd, + struct spi_transfer *xfer) +{ + void __iomem *addr = sdd->regs + S3C64XX_SPI_TX_DATA; + const void *buf = xfer->tx_buf; + unsigned int len = xfer->len; + + switch (sdd->cur_bpw) { + case 32: + iowrite32_rep(addr, buf, len / 4); + break; + case 16: + if (sdd->port_conf->use_32bit_io) + s3c64xx_iowrite16_32_rep(addr, buf, len / 2); + else + iowrite16_rep(addr, buf, len / 2); + break; + default: + if (sdd->port_conf->use_32bit_io) + s3c64xx_iowrite8_32_rep(addr, buf, len); + else + iowrite8_rep(addr, buf, len); + break; + } } static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd, @@ -444,22 +516,9 @@ static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd, chcfg |= S3C64XX_SPI_CH_TXCH_ON; if (dma_mode) { modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; - ret = prepare_dma(&sdd->tx_dma, &xfer->tx_sg); + ret = s3c64xx_prepare_dma(&sdd->tx_dma, &xfer->tx_sg); } else { - switch (sdd->cur_bpw) { - case 32: - iowrite32_rep(regs + S3C64XX_SPI_TX_DATA, - xfer->tx_buf, xfer->len / 4); - break; - case 16: - iowrite16_rep(regs + S3C64XX_SPI_TX_DATA, - xfer->tx_buf, xfer->len / 2); - break; - default: - iowrite8_rep(regs + S3C64XX_SPI_TX_DATA, - xfer->tx_buf, xfer->len); - break; - } + s3c64xx_iowrite_rep(sdd, xfer); } } @@ -476,7 +535,7 @@ static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd, writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) | S3C64XX_SPI_PACKET_CNT_EN, regs + S3C64XX_SPI_PACKET_CNT); - ret = prepare_dma(&sdd->rx_dma, &xfer->rx_sg); + ret = s3c64xx_prepare_dma(&sdd->rx_dma, &xfer->rx_sg); } } @@ -495,9 +554,7 @@ static u32 s3c64xx_spi_wait_for_timeout(struct s3c64xx_spi_driver_data *sdd, void __iomem *regs = sdd->regs; unsigned long val = 1; u32 status; - - /* max fifo depth available */ - u32 max_fifo = (FIFO_LVL_MASK(sdd) >> 1) + 1; + u32 max_fifo = sdd->fifo_depth; if (timeout_ms) val = msecs_to_loops(timeout_ms); @@ -528,7 +585,7 @@ static int s3c64xx_wait_for_dma(struct s3c64xx_spi_driver_data *sdd, /* * If the previous xfer was completed within timeout, then - * proceed further else return -EIO. + * proceed further else return -ETIMEDOUT. * DmaTx returns after simply writing data in the FIFO, * w/o waiting for real transmission on the bus to finish. * DmaRx returns only after Dma read data from FIFO which @@ -549,7 +606,7 @@ static int s3c64xx_wait_for_dma(struct s3c64xx_spi_driver_data *sdd, /* If timed out while checking rx/tx status return error */ if (!val) - return -EIO; + return -ETIMEDOUT; return 0; } @@ -579,7 +636,7 @@ static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd, if (use_irq) { val = msecs_to_jiffies(ms); if (!wait_for_completion_timeout(&sdd->xfer_completion, val)) - return -EIO; + return -ETIMEDOUT; } val = msecs_to_loops(ms); @@ -604,7 +661,7 @@ static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd, * For any size less than the fifo size the below code is * executed atleast once. */ - loops = xfer->len / ((FIFO_LVL_MASK(sdd) >> 1) + 1); + loops = xfer->len / sdd->fifo_depth; buf = xfer->rx_buf; do { /* wait for data to be received in the fifo */ @@ -741,7 +798,7 @@ static int s3c64xx_spi_transfer_one(struct spi_controller *host, struct spi_transfer *xfer) { struct s3c64xx_spi_driver_data *sdd = spi_controller_get_devdata(host); - const unsigned int fifo_len = (FIFO_LVL_MASK(sdd) >> 1) + 1; + const unsigned int fifo_len = sdd->fifo_depth; const void *tx_buf = NULL; void *rx_buf = NULL; int target_len = 0, origin_len = 0; @@ -1093,8 +1150,7 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd) val = readl(regs + S3C64XX_SPI_MODE_CFG); val &= ~S3C64XX_SPI_MODE_4BURST; - val &= ~(S3C64XX_SPI_MAX_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); - val |= (S3C64XX_SPI_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); + val |= (S3C64XX_SPI_MAX_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); writel(val, regs + S3C64XX_SPI_MODE_CFG); s3c64xx_flush_fifo(sdd); @@ -1111,14 +1167,14 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev) return ERR_PTR(-ENOMEM); if (of_property_read_u32(dev->of_node, "samsung,spi-src-clk", &temp)) { - dev_warn(dev, "spi bus clock parent not specified, using clock at index 0 as parent\n"); + dev_dbg(dev, "spi bus clock parent not specified, using clock at index 0 as parent\n"); sci->src_clk_nr = 0; } else { sci->src_clk_nr = temp; } if (of_property_read_u32(dev->of_node, "num-cs", &temp)) { - dev_warn(dev, "number of chip select lines not specified, assuming 1 chip select line\n"); + dev_dbg(dev, "number of chip select lines not specified, assuming 1 chip select line\n"); sci->num_cs = 1; } else { sci->num_cs = temp; @@ -1146,6 +1202,48 @@ static inline const struct s3c64xx_spi_port_config *s3c64xx_spi_get_port_config( return (const struct s3c64xx_spi_port_config *)platform_get_device_id(pdev)->driver_data; } +static int s3c64xx_spi_set_port_id(struct platform_device *pdev, + struct s3c64xx_spi_driver_data *sdd) +{ + const struct s3c64xx_spi_port_config *port_conf = sdd->port_conf; + int ret; + + if (port_conf->rx_fifomask && port_conf->tx_fifomask) + return 0; + + if (pdev->dev.of_node) { + ret = of_alias_get_id(pdev->dev.of_node, "spi"); + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, + "Failed to get alias id\n"); + sdd->port_id = ret; + } else { + if (pdev->id < 0) + return dev_err_probe(&pdev->dev, -EINVAL, + "Negative platform ID is not allowed\n"); + sdd->port_id = pdev->id; + } + + return 0; +} + +static void s3c64xx_spi_set_fifomask(struct s3c64xx_spi_driver_data *sdd) +{ + const struct s3c64xx_spi_port_config *port_conf = sdd->port_conf; + + if (port_conf->rx_fifomask) + sdd->rx_fifomask = port_conf->rx_fifomask; + else + sdd->rx_fifomask = FIFO_LVL_MASK(sdd) << + port_conf->rx_lvl_offset; + + if (port_conf->tx_fifomask) + sdd->tx_fifomask = port_conf->tx_fifomask; + else + sdd->tx_fifomask = FIFO_LVL_MASK(sdd) << + S3C64XX_SPI_ST_TX_FIFO_LVL_SHIFT; +} + static int s3c64xx_spi_probe(struct platform_device *pdev) { struct resource *mem_res; @@ -1181,15 +1279,18 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) sdd->host = host; sdd->cntrlr_info = sci; sdd->pdev = pdev; - if (pdev->dev.of_node) { - ret = of_alias_get_id(pdev->dev.of_node, "spi"); - if (ret < 0) - return dev_err_probe(&pdev->dev, ret, - "Failed to get alias id\n"); - sdd->port_id = ret; - } else { - sdd->port_id = pdev->id; - } + + ret = s3c64xx_spi_set_port_id(pdev, sdd); + if (ret) + return ret; + + if (sdd->port_conf->fifo_depth) + sdd->fifo_depth = sdd->port_conf->fifo_depth; + else if (of_property_read_u32(pdev->dev.of_node, "fifo-depth", + &sdd->fifo_depth)) + sdd->fifo_depth = FIFO_DEPTH(sdd); + + s3c64xx_spi_set_fifomask(sdd); sdd->cur_bpw = 8; @@ -1197,7 +1298,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) sdd->rx_dma.direction = DMA_DEV_TO_MEM; host->dev.of_node = pdev->dev.of_node; - host->bus_num = sdd->port_id; + host->bus_num = -1; host->setup = s3c64xx_spi_setup; host->cleanup = s3c64xx_spi_cleanup; host->prepare_transfer_hardware = s3c64xx_spi_prepare_transfer; @@ -1278,9 +1379,9 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) } dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Targets attached\n", - sdd->port_id, host->num_chipselect); + host->bus_num, host->num_chipselect); dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\n", - mem_res, (FIFO_LVL_MASK(sdd) >> 1) + 1); + mem_res, sdd->fifo_depth); pm_runtime_mark_last_busy(&pdev->dev); pm_runtime_put_autosuspend(&pdev->dev); @@ -1319,8 +1420,9 @@ static int s3c64xx_spi_suspend(struct device *dev) { struct spi_controller *host = dev_get_drvdata(dev); struct s3c64xx_spi_driver_data *sdd = spi_controller_get_devdata(host); + int ret; - int ret = spi_controller_suspend(host); + ret = spi_controller_suspend(host); if (ret) return ret; @@ -1408,7 +1510,9 @@ static const struct dev_pm_ops s3c64xx_spi_pm = { }; static const struct s3c64xx_spi_port_config s3c2443_spi_port_config = { + /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ .fifo_lvl_mask = { 0x7f }, + /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ .rx_lvl_offset = 13, .tx_st_done = 21, .clk_div = 2, @@ -1416,14 +1520,18 @@ static const struct s3c64xx_spi_port_config s3c2443_spi_port_config = { }; static const struct s3c64xx_spi_port_config s3c6410_spi_port_config = { + /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ .fifo_lvl_mask = { 0x7f, 0x7F }, + /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ .rx_lvl_offset = 13, .tx_st_done = 21, .clk_div = 2, }; static const struct s3c64xx_spi_port_config s5pv210_spi_port_config = { + /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ .fifo_lvl_mask = { 0x1ff, 0x7F }, + /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ .rx_lvl_offset = 15, .tx_st_done = 25, .clk_div = 2, @@ -1431,7 +1539,9 @@ static const struct s3c64xx_spi_port_config s5pv210_spi_port_config = { }; static const struct s3c64xx_spi_port_config exynos4_spi_port_config = { + /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F }, + /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ .rx_lvl_offset = 15, .tx_st_done = 25, .clk_div = 2, @@ -1441,7 +1551,9 @@ static const struct s3c64xx_spi_port_config exynos4_spi_port_config = { }; static const struct s3c64xx_spi_port_config exynos7_spi_port_config = { + /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F, 0x7F, 0x7F, 0x1ff}, + /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ .rx_lvl_offset = 15, .tx_st_done = 25, .clk_div = 2, @@ -1451,7 +1563,9 @@ static const struct s3c64xx_spi_port_config exynos7_spi_port_config = { }; static const struct s3c64xx_spi_port_config exynos5433_spi_port_config = { + /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ .fifo_lvl_mask = { 0x1ff, 0x7f, 0x7f, 0x7f, 0x7f, 0x1ff}, + /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ .rx_lvl_offset = 15, .tx_st_done = 25, .clk_div = 2, @@ -1461,9 +1575,23 @@ static const struct s3c64xx_spi_port_config exynos5433_spi_port_config = { .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, }; +static const struct s3c64xx_spi_port_config exynos850_spi_port_config = { + .fifo_depth = 64, + .rx_fifomask = S3C64XX_SPI_ST_RX_FIFO_RDY_V2, + .tx_fifomask = S3C64XX_SPI_ST_TX_FIFO_RDY_V2, + .tx_st_done = 25, + .clk_div = 4, + .high_speed = true, + .clk_from_cmu = true, + .has_loopback = true, + .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, +}; + static const struct s3c64xx_spi_port_config exynosautov9_spi_port_config = { + /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ .fifo_lvl_mask = { 0x1ff, 0x1ff, 0x7f, 0x7f, 0x7f, 0x7f, 0x1ff, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f}, + /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ .rx_lvl_offset = 15, .tx_st_done = 25, .clk_div = 4, @@ -1475,7 +1603,9 @@ static const struct s3c64xx_spi_port_config exynosautov9_spi_port_config = { }; static const struct s3c64xx_spi_port_config fsd_spi_port_config = { + /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ .fifo_lvl_mask = { 0x7f, 0x7f, 0x7f, 0x7f, 0x7f}, + /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ .rx_lvl_offset = 15, .tx_st_done = 25, .clk_div = 2, @@ -1485,6 +1615,19 @@ static const struct s3c64xx_spi_port_config fsd_spi_port_config = { .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, }; +static const struct s3c64xx_spi_port_config gs101_spi_port_config = { + .fifo_depth = 64, + .rx_fifomask = S3C64XX_SPI_ST_RX_FIFO_RDY_V2, + .tx_fifomask = S3C64XX_SPI_ST_TX_FIFO_RDY_V2, + .tx_st_done = 25, + .clk_div = 4, + .high_speed = true, + .clk_from_cmu = true, + .has_loopback = true, + .use_32bit_io = true, + .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, +}; + static const struct platform_device_id s3c64xx_spi_driver_ids[] = { { .name = "s3c2443-spi", @@ -1497,29 +1640,35 @@ static const struct platform_device_id s3c64xx_spi_driver_ids[] = { }; static const struct of_device_id s3c64xx_spi_dt_match[] = { + { .compatible = "google,gs101-spi", + .data = &gs101_spi_port_config, + }, { .compatible = "samsung,s3c2443-spi", - .data = (void *)&s3c2443_spi_port_config, + .data = &s3c2443_spi_port_config, }, { .compatible = "samsung,s3c6410-spi", - .data = (void *)&s3c6410_spi_port_config, + .data = &s3c6410_spi_port_config, }, { .compatible = "samsung,s5pv210-spi", - .data = (void *)&s5pv210_spi_port_config, + .data = &s5pv210_spi_port_config, }, { .compatible = "samsung,exynos4210-spi", - .data = (void *)&exynos4_spi_port_config, + .data = &exynos4_spi_port_config, }, { .compatible = "samsung,exynos7-spi", - .data = (void *)&exynos7_spi_port_config, + .data = &exynos7_spi_port_config, }, { .compatible = "samsung,exynos5433-spi", - .data = (void *)&exynos5433_spi_port_config, + .data = &exynos5433_spi_port_config, + }, + { .compatible = "samsung,exynos850-spi", + .data = &exynos850_spi_port_config, }, { .compatible = "samsung,exynosautov9-spi", - .data = (void *)&exynosautov9_spi_port_config, + .data = &exynosautov9_spi_port_config, }, { .compatible = "tesla,fsd-spi", - .data = (void *)&fsd_spi_port_config, + .data = &fsd_spi_port_config, }, { }, }; diff --git a/drivers/spi/spi-sh-sci.c b/drivers/spi/spi-sh-sci.c index 148d615d2f38..3d560b154ad3 100644 --- a/drivers/spi/spi-sh-sci.c +++ b/drivers/spi/spi-sh-sci.c @@ -136,9 +136,9 @@ static int sh_sci_spi_probe(struct platform_device *dev) } /* setup spi bitbang adaptor */ - sp->bitbang.master = host; - sp->bitbang.master->bus_num = sp->info->bus_num; - sp->bitbang.master->num_chipselect = sp->info->num_chipselect; + sp->bitbang.ctlr = host; + sp->bitbang.ctlr->bus_num = sp->info->bus_num; + sp->bitbang.ctlr->num_chipselect = sp->info->num_chipselect; sp->bitbang.chipselect = sh_sci_spi_chipselect; sp->bitbang.txrx_word[SPI_MODE_0] = sh_sci_spi_txrx_mode0; @@ -166,7 +166,7 @@ static int sh_sci_spi_probe(struct platform_device *dev) setbits(sp, PIN_INIT, 0); iounmap(sp->membase); err1: - spi_controller_put(sp->bitbang.master); + spi_controller_put(sp->bitbang.ctlr); err0: return ret; } @@ -178,7 +178,7 @@ static void sh_sci_spi_remove(struct platform_device *dev) spi_bitbang_stop(&sp->bitbang); setbits(sp, PIN_INIT, 0); iounmap(sp->membase); - spi_controller_put(sp->bitbang.master); + spi_controller_put(sp->bitbang.ctlr); } static struct platform_driver sh_sci_spi_drv = { diff --git a/drivers/spi/spi-slave-mt27xx.c b/drivers/spi/spi-slave-mt27xx.c index 6d6772974783..f1ddf4c099a3 100644 --- a/drivers/spi/spi-slave-mt27xx.c +++ b/drivers/spi/spi-slave-mt27xx.c @@ -297,7 +297,7 @@ static int mtk_spi_slave_transfer_one(struct spi_controller *ctlr, static int mtk_spi_slave_setup(struct spi_device *spi) { - struct mtk_spi_slave *mdata = spi_controller_get_devdata(spi->master); + struct mtk_spi_slave *mdata = spi_controller_get_devdata(spi->controller); u32 reg_val; reg_val = DMA_DONE_EN | DATA_DONE_EN | diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c index 385832030459..f1e922fd362a 100644 --- a/drivers/spi/spi-stm32-qspi.c +++ b/drivers/spi/spi-stm32-qspi.c @@ -8,13 +8,13 @@ #include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/errno.h> +#include <linux/gpio/consumer.h> #include <linux/io.h> #include <linux/iopoll.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/pinctrl/consumer.h> #include <linux/pm_runtime.h> #include <linux/platform_device.h> diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index e61302ef3c21..e4e7ddb7524a 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -1118,6 +1118,21 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) return IRQ_HANDLED; } +static int stm32_spi_optimize_message(struct spi_message *msg) +{ + struct spi_controller *ctrl = msg->spi->controller; + struct stm32_spi *spi = spi_controller_get_devdata(ctrl); + + /* On STM32H7, messages should not exceed a maximum size set + * later via the set_number_of_data function. In order to + * ensure that, split large messages into several messages + */ + if (spi->cfg->set_number_of_data) + return spi_split_transfers_maxwords(ctrl, msg, spi->t_size_max); + + return 0; +} + /** * stm32_spi_prepare_msg - set up the controller to transfer a single message * @ctrl: controller interface @@ -1163,20 +1178,6 @@ static int stm32_spi_prepare_msg(struct spi_controller *ctrl, !!(spi_dev->mode & SPI_LSB_FIRST), !!(spi_dev->mode & SPI_CS_HIGH)); - /* On STM32H7, messages should not exceed a maximum size setted - * afterward via the set_number_of_data function. In order to - * ensure that, split large messages into several messages - */ - if (spi->cfg->set_number_of_data) { - int ret; - - ret = spi_split_transfers_maxwords(ctrl, msg, - spi->t_size_max, - GFP_KERNEL | GFP_DMA); - if (ret) - return ret; - } - spin_lock_irqsave(&spi->lock, flags); /* CPOL, CPHA and LSB FIRST bits have common register */ @@ -2182,6 +2183,7 @@ static int stm32_spi_probe(struct platform_device *pdev) ctrl->max_speed_hz = spi->clk_rate / spi->cfg->baud_rate_div_min; ctrl->min_speed_hz = spi->clk_rate / spi->cfg->baud_rate_div_max; ctrl->use_gpio_descriptors = true; + ctrl->optimize_message = stm32_spi_optimize_message; ctrl->prepare_message = stm32_spi_prepare_msg; ctrl->transfer_one = stm32_spi_transfer_one; ctrl->unprepare_message = stm32_spi_unprepare_msg; diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c index 12355957be97..7795328427a6 100644 --- a/drivers/spi/spi-xilinx.c +++ b/drivers/spi/spi-xilinx.c @@ -434,7 +434,7 @@ static int xilinx_spi_probe(struct platform_device *pdev) xspi = spi_controller_get_devdata(host); xspi->cs_inactive = 0xffffffff; - xspi->bitbang.master = host; + xspi->bitbang.ctlr = host; xspi->bitbang.chipselect = xilinx_spi_chipselect; xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer; xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs; @@ -516,7 +516,7 @@ static void xilinx_spi_remove(struct platform_device *pdev) /* Disable the global IPIF interrupt */ xspi->write_fn(0, regs_base + XIPIF_V123B_DGIER_OFFSET); - spi_controller_put(xspi->bitbang.master); + spi_controller_put(xspi->bitbang.ctlr); } /* work with hotplug and coldplug */ diff --git a/drivers/spi/spi-xtensa-xtfpga.c b/drivers/spi/spi-xtensa-xtfpga.c index 3c7721894376..3c2cda315397 100644 --- a/drivers/spi/spi-xtensa-xtfpga.c +++ b/drivers/spi/spi-xtensa-xtfpga.c @@ -93,7 +93,7 @@ static int xtfpga_spi_probe(struct platform_device *pdev) host->dev.of_node = pdev->dev.of_node; xspi = spi_controller_get_devdata(host); - xspi->bitbang.master = host; + xspi->bitbang.ctlr = host; xspi->bitbang.chipselect = xtfpga_spi_chipselect; xspi->bitbang.txrx_word[SPI_MODE_0] = xtfpga_spi_txrx_word; xspi->regs = devm_platform_ioremap_resource(pdev, 0); diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index f2170f4b5077..f18738ae95f8 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -459,7 +459,7 @@ static void spi_shutdown(struct device *dev) } } -struct bus_type spi_bus_type = { +const struct bus_type spi_bus_type = { .name = "spi", .dev_groups = spi_dev_groups, .match = spi_match_device, @@ -584,7 +584,7 @@ struct spi_device *spi_alloc_device(struct spi_controller *ctlr) return NULL; } - spi->master = spi->controller = ctlr; + spi->controller = ctlr; spi->dev.parent = &ctlr->dev; spi->dev.bus = &spi_bus_type; spi->dev.release = spidev_release; @@ -608,23 +608,51 @@ static void spi_dev_set_name(struct spi_device *spi) spi_get_chipselect(spi, 0)); } +/* + * Zero(0) is a valid physical CS value and can be located at any + * logical CS in the spi->chip_select[]. If all the physical CS + * are initialized to 0 then It would be difficult to differentiate + * between a valid physical CS 0 & an unused logical CS whose physical + * CS can be 0. As a solution to this issue initialize all the CS to -1. + * Now all the unused logical CS will have -1 physical CS value & can be + * ignored while performing physical CS validity checks. + */ +#define SPI_INVALID_CS ((s8)-1) + +static inline bool is_valid_cs(s8 chip_select) +{ + return chip_select != SPI_INVALID_CS; +} + +static inline int spi_dev_check_cs(struct device *dev, + struct spi_device *spi, u8 idx, + struct spi_device *new_spi, u8 new_idx) +{ + u8 cs, cs_new; + u8 idx_new; + + cs = spi_get_chipselect(spi, idx); + for (idx_new = new_idx; idx_new < SPI_CS_CNT_MAX; idx_new++) { + cs_new = spi_get_chipselect(new_spi, idx_new); + if (is_valid_cs(cs) && is_valid_cs(cs_new) && cs == cs_new) { + dev_err(dev, "chipselect %u already in use\n", cs_new); + return -EBUSY; + } + } + return 0; +} + static int spi_dev_check(struct device *dev, void *data) { struct spi_device *spi = to_spi_device(dev); struct spi_device *new_spi = data; - int idx, nw_idx; - u8 cs, cs_nw; + int status, idx; if (spi->controller == new_spi->controller) { for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { - cs = spi_get_chipselect(spi, idx); - for (nw_idx = 0; nw_idx < SPI_CS_CNT_MAX; nw_idx++) { - cs_nw = spi_get_chipselect(new_spi, nw_idx); - if (cs != 0xFF && cs_nw != 0xFF && cs == cs_nw) { - dev_err(dev, "chipselect %d already in use\n", cs_nw); - return -EBUSY; - } - } + status = spi_dev_check_cs(dev, spi, idx, new_spi, 0); + if (status) + return status; } } return 0; @@ -640,13 +668,13 @@ static int __spi_add_device(struct spi_device *spi) { struct spi_controller *ctlr = spi->controller; struct device *dev = ctlr->dev.parent; - int status, idx, nw_idx; - u8 cs, nw_cs; + int status, idx; + u8 cs; for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { /* Chipselects are numbered 0..max; validate. */ cs = spi_get_chipselect(spi, idx); - if (cs != 0xFF && cs >= ctlr->num_chipselect) { + if (is_valid_cs(cs) && cs >= ctlr->num_chipselect) { dev_err(dev, "cs%d >= max %d\n", spi_get_chipselect(spi, idx), ctlr->num_chipselect); return -EINVAL; @@ -658,14 +686,9 @@ static int __spi_add_device(struct spi_device *spi) * For example, spi->chip_select[0] != spi->chip_select[1] and so on. */ for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { - cs = spi_get_chipselect(spi, idx); - for (nw_idx = idx + 1; nw_idx < SPI_CS_CNT_MAX; nw_idx++) { - nw_cs = spi_get_chipselect(spi, nw_idx); - if (cs != 0xFF && nw_cs != 0xFF && cs == nw_cs) { - dev_err(dev, "chipselect %d already in use\n", nw_cs); - return -EBUSY; - } - } + status = spi_dev_check_cs(dev, spi, idx, spi, idx + 1); + if (status) + return status; } /* Set the bus ID string */ @@ -691,7 +714,7 @@ static int __spi_add_device(struct spi_device *spi) for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { cs = spi_get_chipselect(spi, idx); - if (cs != 0xFF) + if (is_valid_cs(cs)) spi_set_csgpiod(spi, idx, ctlr->cs_gpiods[cs]); } } @@ -745,6 +768,14 @@ int spi_add_device(struct spi_device *spi) } EXPORT_SYMBOL_GPL(spi_add_device); +static void spi_set_all_cs_unused(struct spi_device *spi) +{ + u8 idx; + + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) + spi_set_chipselect(spi, idx, SPI_INVALID_CS); +} + /** * spi_new_device - instantiate one new SPI device * @ctlr: Controller to which device is connected @@ -764,7 +795,6 @@ struct spi_device *spi_new_device(struct spi_controller *ctlr, { struct spi_device *proxy; int status; - u8 idx; /* * NOTE: caller did any chip->bus_num checks necessary. @@ -780,19 +810,10 @@ struct spi_device *spi_new_device(struct spi_controller *ctlr, WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias)); - /* - * Zero(0) is a valid physical CS value and can be located at any - * logical CS in the spi->chip_select[]. If all the physical CS - * are initialized to 0 then It would be difficult to differentiate - * between a valid physical CS 0 & an unused logical CS whose physical - * CS can be 0. As a solution to this issue initialize all the CS to 0xFF. - * Now all the unused logical CS will have 0xFF physical CS value & can be - * ignore while performing physical CS validity checks. - */ - for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) - spi_set_chipselect(proxy, idx, 0xFF); - + /* Use provided chip-select for proxy device */ + spi_set_all_cs_unused(proxy); spi_set_chipselect(proxy, 0, chip->chip_select); + proxy->max_speed_hz = chip->max_speed_hz; proxy->mode = chip->mode; proxy->irq = chip->irq; @@ -1007,7 +1028,7 @@ static inline bool spi_is_last_cs(struct spi_device *spi) bool last = false; for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { - if ((spi->cs_index_mask >> idx) & 0x01) { + if (spi->cs_index_mask & BIT(idx)) { if (spi->controller->last_cs[idx] == spi_get_chipselect(spi, idx)) last = true; } @@ -1036,7 +1057,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force) spi->controller->last_cs_index_mask = spi->cs_index_mask; for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) - spi->controller->last_cs[idx] = enable ? spi_get_chipselect(spi, 0) : -1; + spi->controller->last_cs[idx] = enable ? spi_get_chipselect(spi, 0) : SPI_INVALID_CS; spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH; if (spi->mode & SPI_CS_HIGH) @@ -1058,8 +1079,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force) * into account. */ for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { - if (((spi->cs_index_mask >> idx) & 0x01) && - spi_get_csgpiod(spi, idx)) { + if ((spi->cs_index_mask & BIT(idx)) && spi_get_csgpiod(spi, idx)) { if (has_acpi_companion(&spi->dev)) gpiod_set_value_cansleep(spi_get_csgpiod(spi, idx), !enable); @@ -1747,15 +1767,6 @@ static int __spi_pump_transfer_message(struct spi_controller *ctlr, trace_spi_message_start(msg); - ret = spi_split_transfers_maxsize(ctlr, msg, - spi_max_transfer_size(msg->spi), - GFP_KERNEL | GFP_DMA); - if (ret) { - msg->status = ret; - spi_finalize_current_message(ctlr); - return ret; - } - if (ctlr->prepare_message) { ret = ctlr->prepare_message(ctlr, msg); if (ret) { @@ -2083,6 +2094,43 @@ struct spi_message *spi_get_next_queued_message(struct spi_controller *ctlr) } EXPORT_SYMBOL_GPL(spi_get_next_queued_message); +/* + * __spi_unoptimize_message - shared implementation of spi_unoptimize_message() + * and spi_maybe_unoptimize_message() + * @msg: the message to unoptimize + * + * Peripheral drivers should use spi_unoptimize_message() and callers inside + * core should use spi_maybe_unoptimize_message() rather than calling this + * function directly. + * + * It is not valid to call this on a message that is not currently optimized. + */ +static void __spi_unoptimize_message(struct spi_message *msg) +{ + struct spi_controller *ctlr = msg->spi->controller; + + if (ctlr->unoptimize_message) + ctlr->unoptimize_message(msg); + + spi_res_release(ctlr, msg); + + msg->optimized = false; + msg->opt_state = NULL; +} + +/* + * spi_maybe_unoptimize_message - unoptimize msg not managed by a peripheral + * @msg: the message to unoptimize + * + * This function is used to unoptimize a message if and only if it was + * optimized by the core (via spi_maybe_optimize_message()). + */ +static void spi_maybe_unoptimize_message(struct spi_message *msg) +{ + if (!msg->pre_optimized && msg->optimized) + __spi_unoptimize_message(msg); +} + /** * spi_finalize_current_message() - the current message is complete * @ctlr: the controller to return the message to @@ -2111,15 +2159,6 @@ void spi_finalize_current_message(struct spi_controller *ctlr) spi_unmap_msg(ctlr, mesg); - /* - * In the prepare_messages callback the SPI bus has the opportunity - * to split a transfer to smaller chunks. - * - * Release the split transfers here since spi_map_msg() is done on - * the split transfers. - */ - spi_res_release(ctlr, mesg); - if (mesg->prepared && ctlr->unprepare_message) { ret = ctlr->unprepare_message(ctlr, mesg); if (ret) { @@ -2130,6 +2169,8 @@ void spi_finalize_current_message(struct spi_controller *ctlr) mesg->prepared = false; + spi_maybe_unoptimize_message(mesg); + WRITE_ONCE(ctlr->cur_msg_incomplete, false); smp_mb(); /* See __spi_pump_transfer_message()... */ if (READ_ONCE(ctlr->cur_msg_need_completion)) @@ -2397,17 +2438,7 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, return -EINVAL; } - /* - * Zero(0) is a valid physical CS value and can be located at any - * logical CS in the spi->chip_select[]. If all the physical CS - * are initialized to 0 then It would be difficult to differentiate - * between a valid physical CS 0 & an unused logical CS whose physical - * CS can be 0. As a solution to this issue initialize all the CS to 0xFF. - * Now all the unused logical CS will have 0xFF physical CS value & can be - * ignore while performing physical CS validity checks. - */ - for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) - spi_set_chipselect(spi, idx, 0xFF); + spi_set_all_cs_unused(spi); /* Device address */ rc = of_property_read_variable_u32_array(nc, "reg", &cs[0], 1, @@ -2431,14 +2462,10 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, spi_set_chipselect(spi, idx, cs[idx]); /* - * spi->chip_select[i] gives the corresponding physical CS for logical CS i - * logical CS number is represented by setting the ith bit in spi->cs_index_mask - * So, for example, if spi->cs_index_mask = 0x01 then logical CS number is 0 and - * spi->chip_select[0] will give the physical CS. - * By default spi->chip_select[0] will hold the physical CS number so, set - * spi->cs_index_mask as 0x01. + * By default spi->chip_select[0] will hold the physical CS number, + * so set bit 0 in spi->cs_index_mask. */ - spi->cs_index_mask = 0x01; + spi->cs_index_mask = BIT(0); /* Device speed */ if (!of_property_read_u32(nc, "spi-max-frequency", &value)) @@ -2544,7 +2571,6 @@ struct spi_device *spi_new_ancillary_device(struct spi_device *spi, struct spi_controller *ctlr = spi->controller; struct spi_device *ancillary; int rc = 0; - u8 idx; /* Alloc an spi_device */ ancillary = spi_alloc_device(ctlr); @@ -2555,33 +2581,18 @@ struct spi_device *spi_new_ancillary_device(struct spi_device *spi, strscpy(ancillary->modalias, "dummy", sizeof(ancillary->modalias)); - /* - * Zero(0) is a valid physical CS value and can be located at any - * logical CS in the spi->chip_select[]. If all the physical CS - * are initialized to 0 then It would be difficult to differentiate - * between a valid physical CS 0 & an unused logical CS whose physical - * CS can be 0. As a solution to this issue initialize all the CS to 0xFF. - * Now all the unused logical CS will have 0xFF physical CS value & can be - * ignore while performing physical CS validity checks. - */ - for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) - spi_set_chipselect(ancillary, idx, 0xFF); - /* Use provided chip-select for ancillary device */ + spi_set_all_cs_unused(ancillary); spi_set_chipselect(ancillary, 0, chip_select); /* Take over SPI mode/speed from SPI main device */ ancillary->max_speed_hz = spi->max_speed_hz; ancillary->mode = spi->mode; /* - * spi->chip_select[i] gives the corresponding physical CS for logical CS i - * logical CS number is represented by setting the ith bit in spi->cs_index_mask - * So, for example, if spi->cs_index_mask = 0x01 then logical CS number is 0 and - * spi->chip_select[0] will give the physical CS. - * By default spi->chip_select[0] will hold the physical CS number so, set - * spi->cs_index_mask as 0x01. + * By default spi->chip_select[0] will hold the physical CS number, + * so set bit 0 in spi->cs_index_mask. */ - ancillary->cs_index_mask = 0x01; + ancillary->cs_index_mask = BIT(0); WARN_ON(!mutex_is_locked(&ctlr->add_lock)); @@ -2784,7 +2795,6 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr, struct acpi_spi_lookup lookup = {}; struct spi_device *spi; int ret; - u8 idx; if (!ctlr && index == -1) return ERR_PTR(-EINVAL); @@ -2820,33 +2830,19 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr, return ERR_PTR(-ENOMEM); } - /* - * Zero(0) is a valid physical CS value and can be located at any - * logical CS in the spi->chip_select[]. If all the physical CS - * are initialized to 0 then It would be difficult to differentiate - * between a valid physical CS 0 & an unused logical CS whose physical - * CS can be 0. As a solution to this issue initialize all the CS to 0xFF. - * Now all the unused logical CS will have 0xFF physical CS value & can be - * ignore while performing physical CS validity checks. - */ - for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) - spi_set_chipselect(spi, idx, 0xFF); + spi_set_all_cs_unused(spi); + spi_set_chipselect(spi, 0, lookup.chip_select); ACPI_COMPANION_SET(&spi->dev, adev); spi->max_speed_hz = lookup.max_speed_hz; spi->mode |= lookup.mode; spi->irq = lookup.irq; spi->bits_per_word = lookup.bits_per_word; - spi_set_chipselect(spi, 0, lookup.chip_select); /* - * spi->chip_select[i] gives the corresponding physical CS for logical CS i - * logical CS number is represented by setting the ith bit in spi->cs_index_mask - * So, for example, if spi->cs_index_mask = 0x01 then logical CS number is 0 and - * spi->chip_select[0] will give the physical CS. - * By default spi->chip_select[0] will hold the physical CS number so, set - * spi->cs_index_mask as 0x01. + * By default spi->chip_select[0] will hold the physical CS number, + * so set bit 0 in spi->cs_index_mask. */ - spi->cs_index_mask = 0x01; + spi->cs_index_mask = BIT(0); return spi; } @@ -3344,9 +3340,9 @@ int spi_register_controller(struct spi_controller *ctlr) goto free_bus_id; } - /* Setting last_cs to -1 means no chip selected */ + /* Setting last_cs to SPI_INVALID_CS means no chip selected */ for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) - ctlr->last_cs[idx] = -1; + ctlr->last_cs[idx] = SPI_INVALID_CS; status = device_add(&ctlr->dev); if (status < 0) @@ -3687,8 +3683,7 @@ static struct spi_replaced_transfers *spi_replace_transfers( static int __spi_split_transfer_maxsize(struct spi_controller *ctlr, struct spi_message *msg, struct spi_transfer **xferp, - size_t maxsize, - gfp_t gfp) + size_t maxsize) { struct spi_transfer *xfer = *xferp, *xfers; struct spi_replaced_transfers *srt; @@ -3699,7 +3694,7 @@ static int __spi_split_transfer_maxsize(struct spi_controller *ctlr, count = DIV_ROUND_UP(xfer->len, maxsize); /* Create replacement */ - srt = spi_replace_transfers(msg, xfer, 1, count, NULL, 0, gfp); + srt = spi_replace_transfers(msg, xfer, 1, count, NULL, 0, GFP_KERNEL); if (IS_ERR(srt)) return PTR_ERR(srt); xfers = srt->inserted_transfers; @@ -3759,14 +3754,16 @@ static int __spi_split_transfer_maxsize(struct spi_controller *ctlr, * @ctlr: the @spi_controller for this transfer * @msg: the @spi_message to transform * @maxsize: the maximum when to apply this - * @gfp: GFP allocation flags + * + * This function allocates resources that are automatically freed during the + * spi message unoptimize phase so this function should only be called from + * optimize_message callbacks. * * Return: status of transformation */ int spi_split_transfers_maxsize(struct spi_controller *ctlr, struct spi_message *msg, - size_t maxsize, - gfp_t gfp) + size_t maxsize) { struct spi_transfer *xfer; int ret; @@ -3781,7 +3778,7 @@ int spi_split_transfers_maxsize(struct spi_controller *ctlr, list_for_each_entry(xfer, &msg->transfers, transfer_list) { if (xfer->len > maxsize) { ret = __spi_split_transfer_maxsize(ctlr, msg, &xfer, - maxsize, gfp); + maxsize); if (ret) return ret; } @@ -3799,14 +3796,16 @@ EXPORT_SYMBOL_GPL(spi_split_transfers_maxsize); * @ctlr: the @spi_controller for this transfer * @msg: the @spi_message to transform * @maxwords: the number of words to limit each transfer to - * @gfp: GFP allocation flags + * + * This function allocates resources that are automatically freed during the + * spi message unoptimize phase so this function should only be called from + * optimize_message callbacks. * * Return: status of transformation */ int spi_split_transfers_maxwords(struct spi_controller *ctlr, struct spi_message *msg, - size_t maxwords, - gfp_t gfp) + size_t maxwords) { struct spi_transfer *xfer; @@ -3824,7 +3823,7 @@ int spi_split_transfers_maxwords(struct spi_controller *ctlr, maxsize = maxwords * roundup_pow_of_two(BITS_TO_BYTES(xfer->bits_per_word)); if (xfer->len > maxsize) { ret = __spi_split_transfer_maxsize(ctlr, msg, &xfer, - maxsize, gfp); + maxsize); if (ret) return ret; } @@ -4063,33 +4062,7 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message) if (list_empty(&message->transfers)) return -EINVAL; - /* - * If an SPI controller does not support toggling the CS line on each - * transfer (indicated by the SPI_CS_WORD flag) or we are using a GPIO - * for the CS line, we can emulate the CS-per-word hardware function by - * splitting transfers into one-word transfers and ensuring that - * cs_change is set for each transfer. - */ - if ((spi->mode & SPI_CS_WORD) && (!(ctlr->mode_bits & SPI_CS_WORD) || - spi_is_csgpiod(spi))) { - size_t maxsize = BITS_TO_BYTES(spi->bits_per_word); - int ret; - - /* spi_split_transfers_maxsize() requires message->spi */ - message->spi = spi; - - ret = spi_split_transfers_maxsize(ctlr, message, maxsize, - GFP_KERNEL); - if (ret) - return ret; - - list_for_each_entry(xfer, &message->transfers, transfer_list) { - /* Don't change cs_change on the last entry in the list */ - if (list_is_last(&xfer->transfer_list, &message->transfers)) - break; - xfer->cs_change = 1; - } - } + message->spi = spi; /* * Half-duplex links include original MicroWire, and ones with @@ -4202,6 +4175,167 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message) return 0; } +/* + * spi_split_transfers - generic handling of transfer splitting + * @msg: the message to split + * + * Under certain conditions, a SPI controller may not support arbitrary + * transfer sizes or other features required by a peripheral. This function + * will split the transfers in the message into smaller transfers that are + * supported by the controller. + * + * Controllers with special requirements not covered here can also split + * transfers in the optimize_message() callback. + * + * Context: can sleep + * Return: zero on success, else a negative error code + */ +static int spi_split_transfers(struct spi_message *msg) +{ + struct spi_controller *ctlr = msg->spi->controller; + struct spi_transfer *xfer; + int ret; + + /* + * If an SPI controller does not support toggling the CS line on each + * transfer (indicated by the SPI_CS_WORD flag) or we are using a GPIO + * for the CS line, we can emulate the CS-per-word hardware function by + * splitting transfers into one-word transfers and ensuring that + * cs_change is set for each transfer. + */ + if ((msg->spi->mode & SPI_CS_WORD) && + (!(ctlr->mode_bits & SPI_CS_WORD) || spi_is_csgpiod(msg->spi))) { + ret = spi_split_transfers_maxwords(ctlr, msg, 1); + if (ret) + return ret; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + /* Don't change cs_change on the last entry in the list */ + if (list_is_last(&xfer->transfer_list, &msg->transfers)) + break; + + xfer->cs_change = 1; + } + } else { + ret = spi_split_transfers_maxsize(ctlr, msg, + spi_max_transfer_size(msg->spi)); + if (ret) + return ret; + } + + return 0; +} + +/* + * __spi_optimize_message - shared implementation for spi_optimize_message() + * and spi_maybe_optimize_message() + * @spi: the device that will be used for the message + * @msg: the message to optimize + * + * Peripheral drivers will call spi_optimize_message() and the spi core will + * call spi_maybe_optimize_message() instead of calling this directly. + * + * It is not valid to call this on a message that has already been optimized. + * + * Return: zero on success, else a negative error code + */ +static int __spi_optimize_message(struct spi_device *spi, + struct spi_message *msg) +{ + struct spi_controller *ctlr = spi->controller; + int ret; + + ret = __spi_validate(spi, msg); + if (ret) + return ret; + + ret = spi_split_transfers(msg); + if (ret) + return ret; + + if (ctlr->optimize_message) { + ret = ctlr->optimize_message(msg); + if (ret) { + spi_res_release(ctlr, msg); + return ret; + } + } + + msg->optimized = true; + + return 0; +} + +/* + * spi_maybe_optimize_message - optimize message if it isn't already pre-optimized + * @spi: the device that will be used for the message + * @msg: the message to optimize + * Return: zero on success, else a negative error code + */ +static int spi_maybe_optimize_message(struct spi_device *spi, + struct spi_message *msg) +{ + if (msg->pre_optimized) + return 0; + + return __spi_optimize_message(spi, msg); +} + +/** + * spi_optimize_message - do any one-time validation and setup for a SPI message + * @spi: the device that will be used for the message + * @msg: the message to optimize + * + * Peripheral drivers that reuse the same message repeatedly may call this to + * perform as much message prep as possible once, rather than repeating it each + * time a message transfer is performed to improve throughput and reduce CPU + * usage. + * + * Once a message has been optimized, it cannot be modified with the exception + * of updating the contents of any xfer->tx_buf (the pointer can't be changed, + * only the data in the memory it points to). + * + * Calls to this function must be balanced with calls to spi_unoptimize_message() + * to avoid leaking resources. + * + * Context: can sleep + * Return: zero on success, else a negative error code + */ +int spi_optimize_message(struct spi_device *spi, struct spi_message *msg) +{ + int ret; + + ret = __spi_optimize_message(spi, msg); + if (ret) + return ret; + + /* + * This flag indicates that the peripheral driver called spi_optimize_message() + * and therefore we shouldn't unoptimize message automatically when finalizing + * the message but rather wait until spi_unoptimize_message() is called + * by the peripheral driver. + */ + msg->pre_optimized = true; + + return 0; +} +EXPORT_SYMBOL_GPL(spi_optimize_message); + +/** + * spi_unoptimize_message - releases any resources allocated by spi_optimize_message() + * @msg: the message to unoptimize + * + * Calls to this function must be balanced with calls to spi_optimize_message(). + * + * Context: can sleep + */ +void spi_unoptimize_message(struct spi_message *msg) +{ + __spi_unoptimize_message(msg); + msg->pre_optimized = false; +} +EXPORT_SYMBOL_GPL(spi_unoptimize_message); + static int __spi_async(struct spi_device *spi, struct spi_message *message) { struct spi_controller *ctlr = spi->controller; @@ -4214,8 +4348,6 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message) if (!ctlr->transfer) return -ENOTSUPP; - message->spi = spi; - SPI_STATISTICS_INCREMENT_FIELD(ctlr->pcpu_statistics, spi_async); SPI_STATISTICS_INCREMENT_FIELD(spi->pcpu_statistics, spi_async); @@ -4268,8 +4400,8 @@ int spi_async(struct spi_device *spi, struct spi_message *message) int ret; unsigned long flags; - ret = __spi_validate(spi, message); - if (ret != 0) + ret = spi_maybe_optimize_message(spi, message); + if (ret) return ret; spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags); @@ -4281,60 +4413,11 @@ int spi_async(struct spi_device *spi, struct spi_message *message) spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags); - return ret; -} -EXPORT_SYMBOL_GPL(spi_async); - -/** - * spi_async_locked - version of spi_async with exclusive bus usage - * @spi: device with which data will be exchanged - * @message: describes the data transfers, including completion callback - * Context: any (IRQs may be blocked, etc) - * - * This call may be used in_irq and other contexts which can't sleep, - * as well as from task contexts which can sleep. - * - * The completion callback is invoked in a context which can't sleep. - * Before that invocation, the value of message->status is undefined. - * When the callback is issued, message->status holds either zero (to - * indicate complete success) or a negative error code. After that - * callback returns, the driver which issued the transfer request may - * deallocate the associated memory; it's no longer in use by any SPI - * core or controller driver code. - * - * Note that although all messages to a spi_device are handled in - * FIFO order, messages may go to different devices in other orders. - * Some device might be higher priority, or have various "hard" access - * time requirements, for example. - * - * On detection of any fault during the transfer, processing of - * the entire message is aborted, and the device is deselected. - * Until returning from the associated message completion callback, - * no other spi_message queued to that device will be processed. - * (This rule applies equally to all the synchronous transfer calls, - * which are wrappers around this core asynchronous primitive.) - * - * Return: zero on success, else a negative error code. - */ -static int spi_async_locked(struct spi_device *spi, struct spi_message *message) -{ - struct spi_controller *ctlr = spi->controller; - int ret; - unsigned long flags; - - ret = __spi_validate(spi, message); - if (ret != 0) - return ret; - - spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags); - - ret = __spi_async(spi, message); - - spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags); + spi_maybe_unoptimize_message(message); return ret; - } +EXPORT_SYMBOL_GPL(spi_async); static void __spi_transfer_message_noqueue(struct spi_controller *ctlr, struct spi_message *msg) { @@ -4383,6 +4466,7 @@ static void spi_complete(void *arg) static int __spi_sync(struct spi_device *spi, struct spi_message *message) { DECLARE_COMPLETION_ONSTACK(done); + unsigned long flags; int status; struct spi_controller *ctlr = spi->controller; @@ -4391,12 +4475,10 @@ static int __spi_sync(struct spi_device *spi, struct spi_message *message) return -ESHUTDOWN; } - status = __spi_validate(spi, message); - if (status != 0) + status = spi_maybe_optimize_message(spi, message); + if (status) return status; - message->spi = spi; - SPI_STATISTICS_INCREMENT_FIELD(ctlr->pcpu_statistics, spi_sync); SPI_STATISTICS_INCREMENT_FIELD(spi->pcpu_statistics, spi_sync); @@ -4428,7 +4510,11 @@ static int __spi_sync(struct spi_device *spi, struct spi_message *message) */ message->complete = spi_complete; message->context = &done; - status = spi_async_locked(spi, message); + + spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags); + status = __spi_async(spi, message); + spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags); + if (status == 0) { wait_for_completion(&done); status = message->status; diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 655f2c959cd4..95fb5f1c91c1 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -802,7 +802,7 @@ static int spidev_probe(struct spi_device *spi) spidev->devt = MKDEV(SPIDEV_MAJOR, minor); dev = device_create(&spidev_class, &spi->dev, spidev->devt, spidev, "spidev%d.%d", - spi->master->bus_num, spi_get_chipselect(spi, 0)); + spi->controller->bus_num, spi_get_chipselect(spi, 0)); status = PTR_ERR_OR_ZERO(dev); } else { dev_dbg(&spi->dev, "no minor number available!\n"); |