diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2018-11-01 22:25:04 +0100 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2018-11-07 16:15:49 +0000 |
| commit | 5132b3d283710d196cd8af99b5585507e8b30709 (patch) | |
| tree | 500502d0cf45af7a321790aa116e2871128ea216 /drivers/spi/spi-gpio.c | |
| parent | 651022382c7f8da46cb4872a545ee1da6d097d2a (diff) | |
spi: gpio: Support 3WIRE high-impedance turn-around
Some devices such as the TPO TPG110 display panel require
a "high-impedance turn-around", in effect a clock cycle after
switching the line from output to input mode.
Support this in the GPIO driver to begin with. Other driver
may implement it if they can, it is unclear if this can
be achieved with anything else than GPIO bit-banging.
Cc: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi/spi-gpio.c')
| -rw-r--r-- | drivers/spi/spi-gpio.c | 24 |
1 files changed, 21 insertions, 3 deletions
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index 45973ee3ae11..a4aee26028cd 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -256,11 +256,29 @@ static int spi_gpio_setup(struct spi_device *spi) static int spi_gpio_set_direction(struct spi_device *spi, bool output) { struct spi_gpio *spi_gpio = spi_to_spi_gpio(spi); + int ret; if (output) return gpiod_direction_output(spi_gpio->mosi, 1); - else - return gpiod_direction_input(spi_gpio->mosi); + + ret = gpiod_direction_input(spi_gpio->mosi); + if (ret) + return ret; + /* + * Send a turnaround high impedance cycle when switching + * from output to input. Theoretically there should be + * a clock delay here, but as has been noted above, the + * nsec delay function for bit-banged GPIO is simply + * {} because bit-banging just doesn't get fast enough + * anyway. + */ + if (spi->mode & SPI_3WIRE_HIZ) { + gpiod_set_value_cansleep(spi_gpio->sck, + !(spi->mode & SPI_CPOL)); + gpiod_set_value_cansleep(spi_gpio->sck, + !!(spi->mode & SPI_CPOL)); + } + return 0; } static void spi_gpio_cleanup(struct spi_device *spi) @@ -410,7 +428,7 @@ static int spi_gpio_probe(struct platform_device *pdev) return status; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); - master->mode_bits = SPI_3WIRE | SPI_CPHA | SPI_CPOL; + master->mode_bits = SPI_3WIRE | SPI_3WIRE_HIZ | SPI_CPHA | SPI_CPOL; master->flags = master_flags; master->bus_num = pdev->id; /* The master needs to think there is a chipselect even if not connected */ |