diff options
author | Justin Chen <justinpopo6@gmail.com> | 2017-06-15 15:20:31 -0700 |
---|---|---|
committer | Florian Fainelli <f.fainelli@gmail.com> | 2017-09-25 11:47:14 -0700 |
commit | 0e9b11413262ef3d64273e15f7631d9836c53c1a (patch) | |
tree | 3a7db95144e5ad88645cb6c1a3ebcf26ba7a9199 /drivers/soc/bcm | |
parent | dedcf233ceb069c2c1d919ec74a913b39b5b4dd5 (diff) |
soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS)
This commit adds support for the Broadcom STB S2/S3/S5 suspend
states on MIPS based SoCs.
This requires quite a lot of code in order to deal with the
different HW blocks that need to be quiesced during suspend:
- DDR PHY
- DDR memory controller and arbiter
- control processor
The final steps of the suspend execute in cache and there is is a little
bit of assembly code in order to shut down the DDR PHY PLL and then go
into a wait loop until a wake-up even occurs. Conversely the resume part
involves waiting for the DDR PHY PLL to come back up and resume
executions where we left.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Diffstat (limited to 'drivers/soc/bcm')
-rw-r--r-- | drivers/soc/bcm/brcmstb/Kconfig | 2 | ||||
-rw-r--r-- | drivers/soc/bcm/brcmstb/pm/Makefile | 1 | ||||
-rw-r--r-- | drivers/soc/bcm/brcmstb/pm/pm-mips.c | 461 | ||||
-rw-r--r-- | drivers/soc/bcm/brcmstb/pm/pm.h | 13 | ||||
-rw-r--r-- | drivers/soc/bcm/brcmstb/pm/s2-mips.S | 200 | ||||
-rw-r--r-- | drivers/soc/bcm/brcmstb/pm/s3-mips.S | 146 |
6 files changed, 821 insertions, 2 deletions
diff --git a/drivers/soc/bcm/brcmstb/Kconfig b/drivers/soc/bcm/brcmstb/Kconfig index 4425430119fe..d36f6e03c1a6 100644 --- a/drivers/soc/bcm/brcmstb/Kconfig +++ b/drivers/soc/bcm/brcmstb/Kconfig @@ -4,7 +4,7 @@ config BRCMSTB_PM bool "Support suspend/resume for STB platforms" default y depends on PM - depends on ARCH_BRCMSTB + depends on ARCH_BRCMSTB || BMIPS_GENERIC select ARM_CPU_SUSPEND if ARM endif # SOC_BRCMSTB diff --git a/drivers/soc/bcm/brcmstb/pm/Makefile b/drivers/soc/bcm/brcmstb/pm/Makefile index 7c3d20135b7c..08bbd244ef11 100644 --- a/drivers/soc/bcm/brcmstb/pm/Makefile +++ b/drivers/soc/bcm/brcmstb/pm/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_ARM) += s2-arm.o pm-arm.o AFLAGS_s2-arm.o := -march=armv7-a +obj-$(CONFIG_BMIPS_GENERIC) += s2-mips.o s3-mips.o pm-mips.o diff --git a/drivers/soc/bcm/brcmstb/pm/pm-mips.c b/drivers/soc/bcm/brcmstb/pm/pm-mips.c new file mode 100644 index 000000000000..9300b5f62e56 --- /dev/null +++ b/drivers/soc/bcm/brcmstb/pm/pm-mips.c @@ -0,0 +1,461 @@ +/* + * MIPS-specific support for Broadcom STB S2/S3/S5 power management + * + * Copyright (C) 2016-2017 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/printk.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/delay.h> +#include <linux/suspend.h> +#include <asm/bmips.h> +#include <asm/tlbflush.h> + +#include "pm.h" + +#define S2_NUM_PARAMS 6 +#define MAX_NUM_MEMC 3 + +/* S3 constants */ +#define MAX_GP_REGS 16 +#define MAX_CP0_REGS 32 +#define NUM_MEMC_CLIENTS 128 +#define AON_CTRL_RAM_SIZE 128 +#define BRCMSTB_S3_MAGIC 0x5AFEB007 + +#define CLEAR_RESET_MASK 0x01 + +/* Index each CP0 register that needs to be saved */ +#define CONTEXT 0 +#define USER_LOCAL 1 +#define PGMK 2 +#define HWRENA 3 +#define COMPARE 4 +#define STATUS 5 +#define CONFIG 6 +#define MODE 7 +#define EDSP 8 +#define BOOT_VEC 9 +#define EBASE 10 + +struct brcmstb_memc { + void __iomem *ddr_phy_base; + void __iomem *arb_base; +}; + +struct brcmstb_pm_control { + void __iomem *aon_ctrl_base; + void __iomem *aon_sram_base; + void __iomem *timers_base; + struct brcmstb_memc memcs[MAX_NUM_MEMC]; + int num_memc; +}; + +struct brcm_pm_s3_context { + u32 cp0_regs[MAX_CP0_REGS]; + u32 memc0_rts[NUM_MEMC_CLIENTS]; + u32 sc_boot_vec; +}; + +struct brcmstb_mem_transfer; + +struct brcmstb_mem_transfer { + struct brcmstb_mem_transfer *next; + void *src; + void *dst; + dma_addr_t pa_src; + dma_addr_t pa_dst; + u32 len; + u8 key; + u8 mode; + u8 src_remapped; + u8 dst_remapped; + u8 src_dst_remapped; +}; + +#define AON_SAVE_SRAM(base, idx, val) \ + __raw_writel(val, base + (idx << 2)) + +/* Used for saving registers in asm */ +u32 gp_regs[MAX_GP_REGS]; + +#define BSP_CLOCK_STOP 0x00 +#define PM_INITIATE 0x01 + +static struct brcmstb_pm_control ctrl; + +static void brcm_pm_save_cp0_context(struct brcm_pm_s3_context *ctx) +{ + /* Generic MIPS */ + ctx->cp0_regs[CONTEXT] = read_c0_context(); + ctx->cp0_regs[USER_LOCAL] = read_c0_userlocal(); + ctx->cp0_regs[PGMK] = read_c0_pagemask(); + ctx->cp0_regs[HWRENA] = read_c0_cache(); + ctx->cp0_regs[COMPARE] = read_c0_compare(); + ctx->cp0_regs[STATUS] = read_c0_status(); + + /* Broadcom specific */ + ctx->cp0_regs[CONFIG] = read_c0_brcm_config(); + ctx->cp0_regs[MODE] = read_c0_brcm_mode(); + ctx->cp0_regs[EDSP] = read_c0_brcm_edsp(); + ctx->cp0_regs[BOOT_VEC] = read_c0_brcm_bootvec(); + ctx->cp0_regs[EBASE] = read_c0_ebase(); + + ctx->sc_boot_vec = bmips_read_zscm_reg(0xa0); +} + +static void brcm_pm_restore_cp0_context(struct brcm_pm_s3_context *ctx) +{ + /* Restore cp0 state */ + bmips_write_zscm_reg(0xa0, ctx->sc_boot_vec); + + /* Generic MIPS */ + write_c0_context(ctx->cp0_regs[CONTEXT]); + write_c0_userlocal(ctx->cp0_regs[USER_LOCAL]); + write_c0_pagemask(ctx->cp0_regs[PGMK]); + write_c0_cache(ctx->cp0_regs[HWRENA]); + write_c0_compare(ctx->cp0_regs[COMPARE]); + write_c0_status(ctx->cp0_regs[STATUS]); + + /* Broadcom specific */ + write_c0_brcm_config(ctx->cp0_regs[CONFIG]); + write_c0_brcm_mode(ctx->cp0_regs[MODE]); + write_c0_brcm_edsp(ctx->cp0_regs[EDSP]); + write_c0_brcm_bootvec(ctx->cp0_regs[BOOT_VEC]); + write_c0_ebase(ctx->cp0_regs[EBASE]); +} + +static void brcmstb_pm_handshake(void) +{ + void __iomem *base = ctrl.aon_ctrl_base; + u32 tmp; + + /* BSP power handshake, v1 */ + tmp = __raw_readl(base + AON_CTRL_HOST_MISC_CMDS); + tmp &= ~1UL; + __raw_writel(tmp, base + AON_CTRL_HOST_MISC_CMDS); + (void)__raw_readl(base + AON_CTRL_HOST_MISC_CMDS); + + __raw_writel(0, base + AON_CTRL_PM_INITIATE); + (void)__raw_readl(base + AON_CTRL_PM_INITIATE); + __raw_writel(BSP_CLOCK_STOP | PM_INITIATE, + base + AON_CTRL_PM_INITIATE); + /* + * HACK: BSP may have internal race on the CLOCK_STOP command. + * Avoid touching the BSP for a few milliseconds. + */ + mdelay(3); +} + +static void brcmstb_pm_s5(void) +{ + void __iomem *base = ctrl.aon_ctrl_base; + + brcmstb_pm_handshake(); + + /* Clear magic s3 warm-boot value */ + AON_SAVE_SRAM(ctrl.aon_sram_base, 0, 0); + + /* Set the countdown */ + __raw_writel(0x10, base + AON_CTRL_PM_CPU_WAIT_COUNT); + (void)__raw_readl(base + AON_CTRL_PM_CPU_WAIT_COUNT); + + /* Prepare to S5 cold boot */ + __raw_writel(PM_COLD_CONFIG, base + AON_CTRL_PM_CTRL); + (void)__raw_readl(base + AON_CTRL_PM_CTRL); + + __raw_writel((PM_COLD_CONFIG | PM_PWR_DOWN), base + + AON_CTRL_PM_CTRL); + (void)__raw_readl(base + AON_CTRL_PM_CTRL); + + __asm__ __volatile__( + " wait\n" + : : : "memory"); +} + +static int brcmstb_pm_s3(void) +{ + struct brcm_pm_s3_context s3_context; + void __iomem *memc_arb_base; + unsigned long flags; + u32 tmp; + int i; + + /* Prepare for s3 */ + AON_SAVE_SRAM(ctrl.aon_sram_base, 0, BRCMSTB_S3_MAGIC); + AON_SAVE_SRAM(ctrl.aon_sram_base, 1, (u32)&s3_reentry); + AON_SAVE_SRAM(ctrl.aon_sram_base, 2, 0); + + /* Clear RESET_HISTORY */ + tmp = __raw_readl(ctrl.aon_ctrl_base + AON_CTRL_RESET_CTRL); + tmp &= ~CLEAR_RESET_MASK; + __raw_writel(tmp, ctrl.aon_ctrl_base + AON_CTRL_RESET_CTRL); + + local_irq_save(flags); + + /* Inhibit DDR_RSTb pulse for both MMCs*/ + for (i = 0; i < ctrl.num_memc; i++) { + tmp = __raw_readl(ctrl.memcs[i].ddr_phy_base + + DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL); + + tmp &= ~0x0f; + __raw_writel(tmp, ctrl.memcs[i].ddr_phy_base + + DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL); + tmp |= (0x05 | BIT(5)); + __raw_writel(tmp, ctrl.memcs[i].ddr_phy_base + + DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL); + } + + /* Save CP0 context */ + brcm_pm_save_cp0_context(&s3_context); + + /* Save RTS(skip debug register) */ + memc_arb_base = ctrl.memcs[0].arb_base + 4; + for (i = 0; i < NUM_MEMC_CLIENTS; i++) { + s3_context.memc0_rts[i] = __raw_readl(memc_arb_base); + memc_arb_base += 4; + } + + /* Save I/O context */ + local_flush_tlb_all(); + _dma_cache_wback_inv(0, ~0); + + brcm_pm_do_s3(ctrl.aon_ctrl_base, current_cpu_data.dcache.linesz); + + /* CPU reconfiguration */ + local_flush_tlb_all(); + bmips_cpu_setup(); + cpumask_clear(&bmips_booted_mask); + + /* Restore RTS (skip debug register) */ + memc_arb_base = ctrl.memcs[0].arb_base + 4; + for (i = 0; i < NUM_MEMC_CLIENTS; i++) { + __raw_writel(s3_context.memc0_rts[i], memc_arb_base); + memc_arb_base += 4; + } + + /* restore CP0 context */ + brcm_pm_restore_cp0_context(&s3_context); + + local_irq_restore(flags); + + return 0; +} + +static int brcmstb_pm_s2(void) +{ + /* + * We need to pass 6 arguments to an assembly function. Lets avoid the + * stack and pass arguments in a explicit 4 byte array. The assembly + * code assumes all arguments are 4 bytes and arguments are ordered + * like so: + * + * 0: AON_CTRl base register + * 1: DDR_PHY base register + * 2: TIMERS base resgister + * 3: I-Cache line size + * 4: Restart vector address + * 5: Restart vector size + */ + u32 s2_params[6]; + + /* Prepare s2 parameters */ + s2_params[0] = (u32)ctrl.aon_ctrl_base; + s2_params[1] = (u32)ctrl.memcs[0].ddr_phy_base; + s2_params[2] = (u32)ctrl.timers_base; + s2_params[3] = (u32)current_cpu_data.icache.linesz; + s2_params[4] = (u32)BMIPS_WARM_RESTART_VEC; + s2_params[5] = (u32)(bmips_smp_int_vec_end - + bmips_smp_int_vec); + + /* Drop to standby */ + brcm_pm_do_s2(s2_params); + + return 0; +} + +static int brcmstb_pm_standby(bool deep_standby) +{ + brcmstb_pm_handshake(); + + /* Send IRQs to BMIPS_WARM_RESTART_VEC */ + clear_c0_cause(CAUSEF_IV); + irq_disable_hazard(); + set_c0_status(ST0_BEV); + irq_disable_hazard(); + + if (deep_standby) + brcmstb_pm_s3(); + else + brcmstb_pm_s2(); + + /* Send IRQs to normal runtime vectors */ + clear_c0_status(ST0_BEV); + irq_disable_hazard(); + set_c0_cause(CAUSEF_IV); + irq_disable_hazard(); + + return 0; +} + +static int brcmstb_pm_enter(suspend_state_t state) +{ + int ret = -EINVAL; + + switch (state) { + case PM_SUSPEND_STANDBY: + ret = brcmstb_pm_standby(false); + break; + case PM_SUSPEND_MEM: + ret = brcmstb_pm_standby(true); + break; + } + + return ret; +} + +static int brcmstb_pm_valid(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + return true; + case PM_SUSPEND_MEM: + return true; + default: + return false; + } +} + +static const struct platform_suspend_ops brcmstb_pm_ops = { + .enter = brcmstb_pm_enter, + .valid = brcmstb_pm_valid, +}; + +static const struct of_device_id aon_ctrl_dt_ids[] = { + { .compatible = "brcm,brcmstb-aon-ctrl" }, + { /* sentinel */ } +}; + +static const struct of_device_id ddr_phy_dt_ids[] = { + { .compatible = "brcm,brcmstb-ddr-phy" }, + { /* sentinel */ } +}; + +static const struct of_device_id arb_dt_ids[] = { + { .compatible = "brcm,brcmstb-memc-arb" }, + { /* sentinel */ } +}; + +static const struct of_device_id timers_ids[] = { + { .compatible = "brcm,brcmstb-timers" }, + { /* sentinel */ } +}; + +static inline void __iomem *brcmstb_ioremap_node(struct device_node *dn, + int index) +{ + return of_io_request_and_map(dn, index, dn->full_name); +} + +static void __iomem *brcmstb_ioremap_match(const struct of_device_id *matches, + int index, const void **ofdata) +{ + struct device_node *dn; + const struct of_device_id *match; + + dn = of_find_matching_node_and_match(NULL, matches, &match); + if (!dn) + return ERR_PTR(-EINVAL); + + if (ofdata) + *ofdata = match->data; + + return brcmstb_ioremap_node(dn, index); +} + +static int brcmstb_pm_init(void) +{ + struct device_node *dn; + void __iomem *base; + int i; + + /* AON ctrl registers */ + base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 0, NULL); + if (IS_ERR(base)) { + pr_err("error mapping AON_CTRL\n"); + goto aon_err; + } + ctrl.aon_ctrl_base = base; + + /* AON SRAM registers */ + base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 1, NULL); + if (IS_ERR(base)) { + pr_err("error mapping AON_SRAM\n"); + goto sram_err; + } + ctrl.aon_sram_base = base; + + ctrl.num_memc = 0; + /* Map MEMC DDR PHY registers */ + for_each_matching_node(dn, ddr_phy_dt_ids) { + i = ctrl.num_memc; + if (i >= MAX_NUM_MEMC) { + pr_warn("Too many MEMCs (max %d)\n", MAX_NUM_MEMC); + break; + } + base = brcmstb_ioremap_node(dn, 0); + if (IS_ERR(base)) + goto ddr_err; + + ctrl.memcs[i].ddr_phy_base = base; + ctrl.num_memc++; + } + + /* MEMC ARB registers */ + base = brcmstb_ioremap_match(arb_dt_ids, 0, NULL); + if (IS_ERR(base)) { + pr_err("error mapping MEMC ARB\n"); + goto ddr_err; + } + ctrl.memcs[0].arb_base = base; + + /* Timer registers */ + base = brcmstb_ioremap_match(timers_ids, 0, NULL); + if (IS_ERR(base)) { + pr_err("error mapping timers\n"); + goto tmr_err; + } + ctrl.timers_base = base; + + /* s3 cold boot aka s5 */ + pm_power_off = brcmstb_pm_s5; + + suspend_set_ops(&brcmstb_pm_ops); + + return 0; + +tmr_err: + iounmap(ctrl.memcs[0].arb_base); +ddr_err: + for (i = 0; i < ctrl.num_memc; i++) + iounmap(ctrl.memcs[i].ddr_phy_base); + + iounmap(ctrl.aon_sram_base); +sram_err: + iounmap(ctrl.aon_ctrl_base); +aon_err: + return PTR_ERR(base); +} +arch_initcall(brcmstb_pm_init); diff --git a/drivers/soc/bcm/brcmstb/pm/pm.h b/drivers/soc/bcm/brcmstb/pm/pm.h index 142519fdb8f8..b7d35ac70e60 100644 --- a/drivers/soc/bcm/brcmstb/pm/pm.h +++ b/drivers/soc/bcm/brcmstb/pm/pm.h @@ -70,9 +70,20 @@ #ifndef __ASSEMBLY__ +#ifndef CONFIG_MIPS extern const unsigned long brcmstb_pm_do_s2_sz; extern asmlinkage int brcmstb_pm_do_s2(void __iomem *aon_ctrl_base, void __iomem *ddr_phy_pll_status); -#endif +#else +/* s2 asm */ +extern asmlinkage int brcm_pm_do_s2(u32 *s2_params); + +/* s3 asm */ +extern asmlinkage int brcm_pm_do_s3(void __iomem *aon_ctrl_base, + int dcache_linesz); +extern int s3_reentry; +#endif /* CONFIG_MIPS */ + +#endif #endif /* __BRCMSTB_PM_H__ */ diff --git a/drivers/soc/bcm/brcmstb/pm/s2-mips.S b/drivers/soc/bcm/brcmstb/pm/s2-mips.S new file mode 100644 index 000000000000..27a14bc46043 --- /dev/null +++ b/drivers/soc/bcm/brcmstb/pm/s2-mips.S @@ -0,0 +1,200 @@ +/* + * Copyright (C) 2016 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <asm/asm.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/stackframe.h> + +#include "pm.h" + + .text + .set noreorder + .align 5 + +/* + * a0: u32 params array + */ +LEAF(brcm_pm_do_s2) + + subu sp, 64 + sw ra, 0(sp) + sw s0, 4(sp) + sw s1, 8(sp) + sw s2, 12(sp) + sw s3, 16(sp) + sw s4, 20(sp) + sw s5, 24(sp) + sw s6, 28(sp) + sw s7, 32(sp) + + /* + * Dereference the params array + * s0: AON_CTRL base register + * s1: DDR_PHY base register + * s2: TIMERS base register + * s3: I-Cache line size + * s4: Restart vector address + * s5: Restart vector size + */ + move t0, a0 + + lw s0, 0(t0) + lw s1, 4(t0) + lw s2, 8(t0) + lw s3, 12(t0) + lw s4, 16(t0) + lw s5, 20(t0) + + /* Lock this asm section into the I-cache */ + addiu t1, s3, -1 + not t1 + + la t0, brcm_pm_do_s2 + and t0, t1 + + la t2, asm_end + and t2, t1 + +1: cache 0x1c, 0(t0) + bne t0, t2, 1b + addu t0, s3 + + /* Lock the interrupt vector into the I-cache */ + move t0, zero + +2: move t1, s4 + cache 0x1c, 0(t1) + addu t1, s3 + addu t0, s3 + ble t0, s5, 2b + nop + + sync + + /* Power down request */ + li t0, PM_S2_COMMAND + sw zero, AON_CTRL_PM_CTRL(s0) + lw zero, AON_CTRL_PM_CTRL(s0) + sw t0, AON_CTRL_PM_CTRL(s0) + lw t0, AON_CTRL_PM_CTRL(s0) + + /* Enable CP0 interrupt 2 and wait for interrupt */ + mfc0 t0, CP0_STATUS + /* Save cp0 sr for restoring later */ + move s6, t0 + + li t1, ~(ST0_IM | ST0_IE) + and t0, t1 + ori t0, STATUSF_IP2 + mtc0 t0, CP0_STATUS + nop + nop + nop + ori t0, ST0_IE + mtc0 t0, CP0_STATUS + + /* Wait for interrupt */ + wait + nop + + /* Wait for memc0 */ +1: lw t0, DDR40_PHY_CONTROL_REGS_0_PLL_STATUS(s1) + andi t0, 1 + beqz t0, 1b + nop + + /* 1ms delay needed for stable recovery */ + /* Use TIMER1 to count 1 ms */ + li t0, RESET_TIMER + sw t0, TIMER_TIMER1_CTRL(s2) + lw t0, TIMER_TIMER1_CTRL(s2) + + li t0, START_TIMER + sw t0, TIMER_TIMER1_CTRL(s2) + lw t0, TIMER_TIMER1_CTRL(s2) + + /* Prepare delay */ + li t0, TIMER_MASK + lw t1, TIMER_TIMER1_STAT(s2) + and t1, t0 + /* 1ms delay */ + addi t1, 27000 + + /* Wait for the timer value to exceed t1 */ +1: lw t0, TIMER_TIMER1_STAT(s2) + sgtu t2, t1, t0 + bnez t2, 1b + nop + + /* Power back up */ + li t1, 1 + sw t1, AON_CTRL_HOST_MISC_CMDS(s0) + lw t1, AON_CTRL_HOST_MISC_CMDS(s0) + + sw zero, AON_CTRL_PM_CTRL(s0) + lw zero, AON_CTRL_PM_CTRL(s0) + + /* Unlock I-cache */ + addiu t1, s3, -1 + not t1 + + la t0, brcm_pm_do_s2 + and t0, t1 + + la t2, asm_end + and t2, t1 + +1: cache 0x00, 0(t0) + bne t0, t2, 1b + addu t0, s3 + + /* Unlock interrupt vector */ + move t0, zero + +2: move t1, s4 + cache 0x00, 0(t1) + addu t1, s3 + addu t0, s3 + ble t0, s5, 2b + nop + + /* Restore cp0 sr */ + sync + nop + mtc0 s6, CP0_STATUS + nop + + /* Set return value to success */ + li v0, 0 + + /* Return to caller */ + lw s7, 32(sp) + lw s6, 28(sp) + lw s5, 24(sp) + lw s4, 20(sp) + lw s3, 16(sp) + lw s2, 12(sp) + lw s1, 8(sp) + lw s0, 4(sp) + lw ra, 0(sp) + addiu sp, 64 + + jr ra + nop +END(brcm_pm_do_s2) + + .globl asm_end +asm_end: + nop + diff --git a/drivers/soc/bcm/brcmstb/pm/s3-mips.S b/drivers/soc/bcm/brcmstb/pm/s3-mips.S new file mode 100644 index 000000000000..1242308a8868 --- /dev/null +++ b/drivers/soc/bcm/brcmstb/pm/s3-mips.S @@ -0,0 +1,146 @@ +/* + * Copyright (C) 2016 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <asm/asm.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/bmips.h> + +#include "pm.h" + + .text + .set noreorder + .align 5 + .global s3_reentry + +/* + * a0: AON_CTRL base register + * a1: D-Cache line size + */ +LEAF(brcm_pm_do_s3) + + /* Get the address of s3_context */ + la t0, gp_regs + sw ra, 0(t0) + sw s0, 4(t0) + sw s1, 8(t0) + sw s2, 12(t0) + sw s3, 16(t0) + sw s4, 20(t0) + sw s5, 24(t0) + sw s6, 28(t0) + sw s7, 32(t0) + sw gp, 36(t0) + sw sp, 40(t0) + sw fp, 44(t0) + + /* Save CP0 Status */ + mfc0 t1, CP0_STATUS + sw t1, 48(t0) + + /* Write-back gp registers - cache will be gone */ + addiu t1, a1, -1 + not t1 + and t0, t1 + + /* Flush at least 64 bytes */ + addiu t2, t0, 64 + and t2, t1 + +1: cache 0x17, 0(t0) + bne t0, t2, 1b + addu t0, a1 + + /* Drop to deep standby */ + li t1, PM_WARM_CONFIG + sw zero, AON_CTRL_PM_CTRL(a0) + lw zero, AON_CTRL_PM_CTRL(a0) + sw t1, AON_CTRL_PM_CTRL(a0) + lw t1, AON_CTRL_PM_CTRL(a0) + + li t1, (PM_WARM_CONFIG | PM_PWR_DOWN) + sw t1, AON_CTRL_PM_CTRL(a0) + lw t1, AON_CTRL_PM_CTRL(a0) + + /* Enable CP0 interrupt 2 and wait for interrupt */ + mfc0 t0, CP0_STATUS + + li t1, ~(ST0_IM | ST0_IE) + and t0, t1 + ori t0, STATUSF_IP2 + mtc0 t0, CP0_STATUS + nop + nop + nop + ori t0, ST0_IE + mtc0 t0, CP0_STATUS + + /* Wait for interrupt */ + wait + nop + +s3_reentry: + + /* Clear call/return stack */ + li t0, (0x06 << 16) + mtc0 t0, $22, 2 + ssnop + ssnop + ssnop + + /* Clear jump target buffer */ + li t0, (0x04 << 16) + mtc0 t0, $22, 2 + ssnop + ssnop + ssnop + + sync + nop + + /* Setup mmu defaults */ + mtc0 zero, CP0_WIRED + mtc0 zero, CP0_ENTRYHI + li k0, PM_DEFAULT_MASK + mtc0 k0, CP0_PAGEMASK + + li sp, BMIPS_WARM_RESTART_VEC + la k0, plat_wired_tlb_setup + jalr k0 + nop + + /* Restore general purpose registers */ + la t0, gp_regs + lw fp, 44(t0) + lw sp, 40(t0) + lw gp, 36(t0) + lw s7, 32(t0) + lw s6, 28(t0) + lw s5, 24(t0) + lw s4, 20(t0) + lw s3, 16(t0) + lw s2, 12(t0) + lw s1, 8(t0) + lw s0, 4(t0) + lw ra, 0(t0) + + /* Restore CP0 status */ + lw t1, 48(t0) + mtc0 t1, CP0_STATUS + + /* Return to caller */ + li v0, 0 + jr ra + nop + +END(brcm_pm_do_s3) |