Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 179 insertions, 0 deletions

diff --git a/drivers/sbus/char/vfc.h b/drivers/sbus/char/vfc.h
new file mode 100644
index 000000000000..e56a43af0f62
--- /dev/null
+++ b/drivers/sbus/char/vfc.h
@@ -0,0 +1,179 @@
+#ifndef _LINUX_VFC_H_
+#define _LINUX_VFC_H_
+
+#include <linux/devfs_fs_kernel.h>
+
+/*
+ * The control register for the vfc is at offset 0x4000
+ * The first field ram bank is located at offset 0x5000
+ * The second field ram bank is at offset 0x7000
+ * i2c_reg address the Phillips PCF8584(see notes in vfc_i2c.c) 
+ *    data and transmit register.
+ * i2c_s1 controls register s1 of the PCF8584
+ * i2c_write seems to be similar to i2c_write but I am not 
+ *    quite sure why sun uses it
+ * 
+ * I am also not sure whether or not you can read the fram bank as a
+ * whole or whether you must read each word individually from offset
+ * 0x5000 as soon as I figure it out I will update this file */
+
+struct vfc_regs {
+	char pad1[0x4000];
+	unsigned int control;  /* Offset 0x4000 */
+	char pad2[0xffb];      /* from offset 0x4004 to 0x5000 */
+	unsigned int fram_bank1; /* Offset 0x5000 */
+	char pad3[0xffb];        /* from offset 0x5004 to 0x6000 */
+	unsigned int i2c_reg; /* Offset 0x6000 */
+	unsigned int i2c_magic2; /* Offset 0x6004 */
+	unsigned int i2c_s1;  /* Offset 0x6008 */
+	unsigned int i2c_write; /* Offset 0x600c */
+	char pad4[0xff0];     /* from offset 0x6010 to 0x7000 */
+	unsigned int fram_bank2; /* Offset 0x7000 */
+	char pad5[0x1000];
+};
+
+#define VFC_SAA9051_NR (13)
+#define VFC_SAA9051_ADDR (0x8a)
+	/* The saa9051 returns the following for its status 
+	 * bit 0 - 0
+	 * bit 1 - SECAM color detected (1=found,0=not found)
+	 * bit 2 - COLOR detected (1=found,0=not found)
+	 * bit 3 - 0
+	 * bit 4 - Field frequency bit (1=60Hz (NTSC), 0=50Hz (PAL))
+	 * bit 5 - 1
+	 * bit 6 - horizontal frequency lock (1=transmitter found,
+	 *                                    0=no transmitter)
+	 * bit 7 - Power on reset bit (1=reset,0=at least one successful 
+	 *                                       read of the status byte)
+	 */
+
+#define VFC_SAA9051_PONRES (0x80)
+#define VFC_SAA9051_HLOCK (0x40)
+#define VFC_SAA9051_FD (0x10)
+#define VFC_SAA9051_CD (0x04)
+#define VFC_SAA9051_CS (0x02)
+
+
+/* The various saa9051 sub addresses */
+
+#define VFC_SAA9051_IDEL (0) 
+#define VFC_SAA9051_HSY_START (1)
+#define VFC_SAA9051_HSY_STOP (2)
+#define VFC_SAA9051_HC_START (3)
+#define VFC_SAA9051_HC_STOP (4)
+#define VFC_SAA9051_HS_START (5)
+#define VFC_SAA9051_HORIZ_PEAK (6)
+#define VFC_SAA9051_HUE (7)
+#define VFC_SAA9051_C1 (8)
+#define VFC_SAA9051_C2 (9)
+#define VFC_SAA9051_C3 (0xa)
+#define VFC_SAA9051_SECAM_DELAY (0xb)
+
+
+/* Bit settings for saa9051 sub address 0x06 */
+
+#define VFC_SAA9051_AP1 (0x01)
+#define VFC_SAA9051_AP2 (0x02)
+#define VFC_SAA9051_COR1 (0x04)
+#define VFC_SAA9051_COR2 (0x08)
+#define VFC_SAA9051_BP1 (0x10)
+#define VFC_SAA9051_BP2 (0x20)
+#define VFC_SAA9051_PF (0x40)
+#define VFC_SAA9051_BY (0x80)
+
+
+/* Bit settings for saa9051 sub address 0x08 */
+
+#define VFC_SAA9051_CCFR0 (0x01)
+#define VFC_SAA9051_CCFR1 (0x02)
+#define VFC_SAA9051_YPN (0x04)
+#define VFC_SAA9051_ALT (0x08)
+#define VFC_SAA9051_CO (0x10)
+#define VFC_SAA9051_VTR (0x20)
+#define VFC_SAA9051_FS (0x40)
+#define VFC_SAA9051_HPLL (0x80)
+
+
+/* Bit settings for saa9051 sub address 9 */
+
+#define VFC_SAA9051_SS0 (0x01)
+#define VFC_SAA9051_SS1 (0x02)
+#define VFC_SAA9051_AFCC (0x04)
+#define VFC_SAA9051_CI (0x08)
+#define VFC_SAA9051_SA9D4 (0x10) /* Don't care bit */
+#define VFC_SAA9051_OEC (0x20)
+#define VFC_SAA9051_OEY (0x40)
+#define VFC_SAA9051_VNL (0x80)
+
+
+/* Bit settings for saa9051 sub address 0x0A */
+
+#define VFC_SAA9051_YDL0 (0x01)
+#define VFC_SAA9051_YDL1 (0x02)
+#define VFC_SAA9051_YDL2 (0x04)
+#define VFC_SAA9051_SS2 (0x08)
+#define VFC_SAA9051_SS3 (0x10)
+#define VFC_SAA9051_YC (0x20)
+#define VFC_SAA9051_CT (0x40)
+#define VFC_SAA9051_SYC (0x80)
+
+
+#define VFC_SAA9051_SA(a,b) ((a)->saa9051_state_array[(b)+1])
+#define vfc_update_saa9051(a) (vfc_i2c_sendbuf((a),VFC_SAA9051_ADDR,\
+					    (a)->saa9051_state_array,\
+					    VFC_SAA9051_NR))
+
+
+struct vfc_dev {
+	volatile struct vfc_regs *regs;
+	struct vfc_regs *phys_regs;
+	unsigned int control_reg;
+	struct semaphore device_lock_sem;
+	struct timer_list poll_timer;
+	wait_queue_head_t poll_wait;
+	int instance;
+	int busy;
+	unsigned long which_io;
+	unsigned char saa9051_state_array[VFC_SAA9051_NR];
+};
+
+extern struct vfc_dev **vfc_dev_lst;
+
+void captstat_reset(struct vfc_dev *);
+void memptr_reset(struct vfc_dev *);
+
+int vfc_pcf8584_init(struct vfc_dev *);
+void vfc_i2c_delay_no_busy(struct vfc_dev *, unsigned long);
+void vfc_i2c_delay(struct vfc_dev *);
+int vfc_i2c_sendbuf(struct vfc_dev *, unsigned char, char *, int) ;
+int vfc_i2c_recvbuf(struct vfc_dev *, unsigned char, char *, int) ;
+int vfc_i2c_reset_bus(struct vfc_dev *);
+int vfc_init_i2c_bus(struct vfc_dev *);
+void vfc_lock_device(struct vfc_dev *);
+void vfc_unlock_device(struct vfc_dev *);
+
+#define VFC_CONTROL_DIAGMODE  0x10000000
+#define VFC_CONTROL_MEMPTR    0x20000000
+#define VFC_CONTROL_CAPTURE   0x02000000
+#define VFC_CONTROL_CAPTRESET 0x04000000
+
+#define VFC_STATUS_CAPTURE    0x08000000
+
+#ifdef VFC_IOCTL_DEBUG
+#define VFC_IOCTL_DEBUG_PRINTK(a) printk a
+#else
+#define VFC_IOCTL_DEBUG_PRINTK(a)
+#endif
+
+#ifdef VFC_I2C_DEBUG
+#define VFC_I2C_DEBUG_PRINTK(a) printk a
+#else
+#define VFC_I2C_DEBUG_PRINTK(a)
+#endif
+
+#endif /* _LINUX_VFC_H_ */
+
+
+
+
+