diff options
| author | Hauke Mehrtens <hauke@hauke-m.de> | 2020-08-20 18:51:21 +0200 |
|---|---|---|
| committer | Miquel Raynal <miquel.raynal@bootlin.com> | 2020-09-30 16:44:16 +0200 |
| commit | 302d8a2288529c44401d946de09526009e4f7124 (patch) | |
| tree | ead56737632e41d11f743338ab8f71f3d7c2828d /drivers/mtd | |
| parent | aea7687e77bebce5b67fab9d03347bd8df7933c7 (diff) | |
mtd: spinand: gigadevice: Add support for GD5F4GQ4xC
This adds support for the following 4GiB chips:
GD5F4GQ4RCYIG 1.8V
GD5F4GQ4UCYIG 3.3V
The datasheet can be found here:
https://www.novitronic.ch/sixcms/media.php/2/DS-00173-GD5F4GQ4xCxIG-Rev1.574695.pdf
The GD5F4GQ4UCYIGT (3.3V) version is used on the Imagination
Technologies Creator Ci40 (Marduk), the 1.8V version was not tested.
This device only works in single SPI mode and not in dual or quad mode
for me on this board.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200820165121.3192-4-hauke@hauke-m.de
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/nand/spi/gigadevice.c | 49 |
1 files changed, 49 insertions, 0 deletions
diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c index 0b7667e60780..33c67403c4aa 100644 --- a/drivers/mtd/nand/spi/gigadevice.c +++ b/drivers/mtd/nand/spi/gigadevice.c @@ -132,6 +132,35 @@ static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = { .free = gd5fxgq4_variant2_ooblayout_free, }; +static int gd5fxgq4xc_ooblayout_256_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 128; + oobregion->length = 128; + + return 0; +} + +static int gd5fxgq4xc_ooblayout_256_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 1; + oobregion->length = 127; + + return 0; +} + +static const struct mtd_ooblayout_ops gd5fxgq4xc_oob_256_ops = { + .ecc = gd5fxgq4xc_ooblayout_256_ecc, + .free = gd5fxgq4xc_ooblayout_256_free, +}; + static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand, u8 status) { @@ -225,6 +254,26 @@ static const struct spinand_info gigadevice_spinand_table[] = { SPINAND_HAS_QE_BIT, SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout, gd5fxgq4xa_ecc_get_status)), + SPINAND_INFO("GD5F4GQ4RC", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE, 0xa4, 0x68), + NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f, + &write_cache_variants, + &update_cache_variants), + SPINAND_HAS_QE_BIT, + SPINAND_ECCINFO(&gd5fxgq4xc_oob_256_ops, + gd5fxgq4ufxxg_ecc_get_status)), + SPINAND_INFO("GD5F4GQ4UC", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE, 0xb4, 0x68), + NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f, + &write_cache_variants, + &update_cache_variants), + SPINAND_HAS_QE_BIT, + SPINAND_ECCINFO(&gd5fxgq4xc_oob_256_ops, + gd5fxgq4ufxxg_ecc_get_status)), SPINAND_INFO("GD5F1GQ4UExxG", SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xd1), NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1), |