Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pul removal of obsolete architecture ports from Arnd Bergmann:
 "This removes the entire architecture code for blackfin, cris, frv,
  m32r, metag, mn10300, score, and tile, including the associated device
  drivers.

  I have been working with the (former) maintainers for each one to
  ensure that my interpretation was right and the code is definitely
  unused in mainline kernels. Many had fond memories of working on the
  respective ports to start with and getting them included in upstream,
  but also saw no point in keeping the port alive without any users.

  In the end, it seems that while the eight architectures are extremely
  different, they all suffered the same fate: There was one company in
  charge of an SoC line, a CPU microarchitecture and a software
  ecosystem, which was more costly than licensing newer off-the-shelf
  CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
  seems that all the SoC product lines are still around, but have not
  used the custom CPU architectures for several years at this point. In
  contrast, CPU instruction sets that remain popular and have actively
  maintained kernel ports tend to all be used across multiple licensees.

  [ See the new nds32 port merged in the previous commit for the next
    generation of "one company in charge of an SoC line, a CPU
    microarchitecture and a software ecosystem"   - Linus ]

  The removal came out of a discussion that is now documented at
  https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
  marking any ports as deprecated but remove them all at once after I
  made sure that they are all unused. Some architectures (notably tile,
  mn10300, and blackfin) are still being shipped in products with old
  kernels, but those products will never be updated to newer kernel
  releases.

  After this series, we still have a few architectures without mainline
  gcc support:

   - unicore32 and hexagon both have very outdated gcc releases, but the
     maintainers promised to work on providing something newer. At least
     in case of hexagon, this will only be llvm, not gcc.

   - openrisc, risc-v and nds32 are still in the process of finishing
     their support or getting it added to mainline gcc in the first
     place. They all have patched gcc-7.3 ports that work to some
     degree, but complete upstream support won't happen before gcc-8.1.
     Csky posted their first kernel patch set last week, their situation
     will be similar

  [ Palmer Dabbelt points out that RISC-V support is in mainline gcc
    since gcc-7, although gcc-7.3.0 is the recommended minimum  - Linus ]"

This really says it all:

 2498 files changed, 95 insertions(+), 467668 deletions(-)

* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
  MAINTAINERS: UNICORE32: Change email account
  staging: iio: remove iio-trig-bfin-timer driver
  tty: hvc: remove tile driver
  tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
  serial: remove tile uart driver
  serial: remove m32r_sio driver
  serial: remove blackfin drivers
  serial: remove cris/etrax uart drivers
  usb: Remove Blackfin references in USB support
  usb: isp1362: remove blackfin arch glue
  usb: musb: remove blackfin port
  usb: host: remove tilegx platform glue
  pwm: remove pwm-bfin driver
  i2c: remove bfin-twi driver
  spi: remove blackfin related host drivers
  watchdog: remove bfin_wdt driver
  can: remove bfin_can driver
  mmc: remove bfin_sdh driver
  input: misc: remove blackfin rotary driver
  input: keyboard: remove bf54x driver
  ...

3 files changed, 0 insertions, 699 deletions

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 620c2d90a646..b4fd5d48dd35 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -646,25 +646,6 @@ config MMC_VIA_SDMMC
 
 	  If unsure, say N.
 
-config SDH_BFIN
-	tristate "Blackfin Secure Digital Host support"
-	depends on (BF54x && !BF544) || (BF51x && !BF512)
-	help
-	  If you say yes here you will get support for the Blackfin on-chip
-	  Secure Digital Host interface.  This includes support for MMC and
-	  SD cards.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin_sdh.
-
-	  If unsure, say N.
-
-config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
-	bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor Workaround"
-	depends on SDH_BFIN
-	help
-	  If you say yes here SD-Cards may work on the EZkit.
-
 config MMC_CAVIUM_OCTEON
 	tristate "Cavium OCTEON SD/MMC Card Interface support"
 	depends on CAVIUM_OCTEON_SOC
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 84cd1388abc3..f563cc0b7f93 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -43,7 +43,6 @@ obj-$(CONFIG_MMC_SDHI_SYS_DMAC)		+= renesas_sdhi_sys_dmac.o
 obj-$(CONFIG_MMC_SDHI_INTERNAL_DMAC)	+= renesas_sdhi_internal_dmac.o
 obj-$(CONFIG_MMC_CB710)		+= cb710-mmc.o
 obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
-obj-$(CONFIG_SDH_BFIN)		+= bfin_sdh.o
 octeon-mmc-objs := cavium.o cavium-octeon.o
 obj-$(CONFIG_MMC_CAVIUM_OCTEON) += octeon-mmc.o
 thunderx-mmc-objs := cavium.o cavium-thunderx.o
diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c
deleted file mode 100644
index 526231e38583..000000000000
--- a/drivers/mmc/host/bfin_sdh.c
+++ /dev/null
@@ -1,679 +0,0 @@
-/*
- * bfin_sdh.c - Analog Devices Blackfin SDH Controller
- *
- * Copyright (C) 2007-2009 Analog Device Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#define DRIVER_NAME	"bfin-sdh"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/mmc/host.h>
-#include <linux/proc_fs.h>
-#include <linux/gfp.h>
-
-#include <asm/cacheflush.h>
-#include <asm/dma.h>
-#include <asm/portmux.h>
-#include <asm/bfin_sdh.h>
-
-#if defined(CONFIG_BF51x) || defined(__ADSPBF60x__)
-#define bfin_read_SDH_CLK_CTL		bfin_read_RSI_CLK_CTL
-#define bfin_write_SDH_CLK_CTL		bfin_write_RSI_CLK_CTL
-#define bfin_write_SDH_ARGUMENT		bfin_write_RSI_ARGUMENT
-#define bfin_write_SDH_COMMAND		bfin_write_RSI_COMMAND
-#define bfin_write_SDH_DATA_TIMER	bfin_write_RSI_DATA_TIMER
-#define bfin_read_SDH_RESPONSE0		bfin_read_RSI_RESPONSE0
-#define bfin_read_SDH_RESPONSE1		bfin_read_RSI_RESPONSE1
-#define bfin_read_SDH_RESPONSE2		bfin_read_RSI_RESPONSE2
-#define bfin_read_SDH_RESPONSE3		bfin_read_RSI_RESPONSE3
-#define bfin_write_SDH_DATA_LGTH	bfin_write_RSI_DATA_LGTH
-#define bfin_read_SDH_DATA_CTL		bfin_read_RSI_DATA_CTL
-#define bfin_write_SDH_DATA_CTL		bfin_write_RSI_DATA_CTL
-#define bfin_read_SDH_DATA_CNT		bfin_read_RSI_DATA_CNT
-#define bfin_write_SDH_STATUS_CLR	bfin_write_RSI_STATUS_CLR
-#define bfin_read_SDH_E_STATUS		bfin_read_RSI_E_STATUS
-#define bfin_write_SDH_E_STATUS		bfin_write_RSI_E_STATUS
-#define bfin_read_SDH_STATUS		bfin_read_RSI_STATUS
-#define bfin_write_SDH_MASK0		bfin_write_RSI_MASK0
-#define bfin_write_SDH_E_MASK		bfin_write_RSI_E_MASK
-#define bfin_read_SDH_CFG		bfin_read_RSI_CFG
-#define bfin_write_SDH_CFG		bfin_write_RSI_CFG
-# if defined(__ADSPBF60x__)
-#  define bfin_read_SDH_BLK_SIZE	bfin_read_RSI_BLKSZ
-#  define bfin_write_SDH_BLK_SIZE	bfin_write_RSI_BLKSZ
-# else
-#  define bfin_read_SDH_PWR_CTL		bfin_read_RSI_PWR_CTL
-#  define bfin_write_SDH_PWR_CTL	bfin_write_RSI_PWR_CTL
-# endif
-#endif
-
-struct sdh_host {
-	struct mmc_host		*mmc;
-	spinlock_t		lock;
-	struct resource		*res;
-	void __iomem		*base;
-	int			irq;
-	int			stat_irq;
-	int			dma_ch;
-	int			dma_dir;
-	struct dma_desc_array	*sg_cpu;
-	dma_addr_t		sg_dma;
-	int			dma_len;
-
-	unsigned long		sclk;
-	unsigned int		imask;
-	unsigned int		power_mode;
-	unsigned int		clk_div;
-
-	struct mmc_request	*mrq;
-	struct mmc_command	*cmd;
-	struct mmc_data		*data;
-};
-
-static struct bfin_sd_host *get_sdh_data(struct platform_device *pdev)
-{
-	return pdev->dev.platform_data;
-}
-
-static void sdh_stop_clock(struct sdh_host *host)
-{
-	bfin_write_SDH_CLK_CTL(bfin_read_SDH_CLK_CTL() & ~CLK_E);
-	SSYNC();
-}
-
-static void sdh_enable_stat_irq(struct sdh_host *host, unsigned int mask)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&host->lock, flags);
-	host->imask |= mask;
-	bfin_write_SDH_MASK0(mask);
-	SSYNC();
-	spin_unlock_irqrestore(&host->lock, flags);
-}
-
-static void sdh_disable_stat_irq(struct sdh_host *host, unsigned int mask)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&host->lock, flags);
-	host->imask &= ~mask;
-	bfin_write_SDH_MASK0(host->imask);
-	SSYNC();
-	spin_unlock_irqrestore(&host->lock, flags);
-}
-
-static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data)
-{
-	unsigned int length;
-	unsigned int data_ctl;
-	unsigned int dma_cfg;
-	unsigned int cycle_ns, timeout;
-
-	dev_dbg(mmc_dev(host->mmc), "%s enter flags: 0x%x\n", __func__, data->flags);
-	host->data = data;
-	data_ctl = 0;
-	dma_cfg = 0;
-
-	length = data->blksz * data->blocks;
-	bfin_write_SDH_DATA_LGTH(length);
-
-	if (data->flags & MMC_DATA_READ)
-		data_ctl |= DTX_DIR;
-	/* Only supports power-of-2 block size */
-	if (data->blksz & (data->blksz - 1))
-		return -EINVAL;
-#ifndef RSI_BLKSZ
-	data_ctl |= ((ffs(data->blksz) - 1) << 4);
-#else
-        bfin_write_SDH_BLK_SIZE(data->blksz);
-#endif
-
-	bfin_write_SDH_DATA_CTL(data_ctl);
-	/* the time of a host clock period in ns */
-	cycle_ns = 1000000000 / (host->sclk / (2 * (host->clk_div + 1)));
-	timeout = data->timeout_ns / cycle_ns;
-	timeout += data->timeout_clks;
-	bfin_write_SDH_DATA_TIMER(timeout);
-	SSYNC();
-
-	if (data->flags & MMC_DATA_READ) {
-		host->dma_dir = DMA_FROM_DEVICE;
-		dma_cfg |= WNR;
-	} else
-		host->dma_dir = DMA_TO_DEVICE;
-
-	sdh_enable_stat_irq(host, (DAT_CRC_FAIL | DAT_TIME_OUT | DAT_END));
-	host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma_dir);
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
-	dma_cfg |= DMAFLOW_ARRAY | RESTART | WDSIZE_32 | DMAEN;
-# ifdef RSI_BLKSZ
-	dma_cfg |= PSIZE_32 | NDSIZE_3;
-# else
-	dma_cfg |= NDSIZE_5;
-# endif
-	{
-		struct scatterlist *sg;
-		int i;
-		for_each_sg(data->sg, sg, host->dma_len, i) {
-			host->sg_cpu[i].start_addr = sg_dma_address(sg);
-			host->sg_cpu[i].cfg = dma_cfg;
-			host->sg_cpu[i].x_count = sg_dma_len(sg) / 4;
-			host->sg_cpu[i].x_modify = 4;
-			dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, "
-				"cfg:0x%lx, x_count:0x%lx, x_modify:0x%lx\n",
-				i, host->sg_cpu[i].start_addr,
-				host->sg_cpu[i].cfg, host->sg_cpu[i].x_count,
-				host->sg_cpu[i].x_modify);
-		}
-	}
-	flush_dcache_range((unsigned int)host->sg_cpu,
-		(unsigned int)host->sg_cpu +
-			host->dma_len * sizeof(struct dma_desc_array));
-	/* Set the last descriptor to stop mode */
-	host->sg_cpu[host->dma_len - 1].cfg &= ~(DMAFLOW | NDSIZE);
-	host->sg_cpu[host->dma_len - 1].cfg |= DI_EN;
-
-	set_dma_curr_desc_addr(host->dma_ch, (unsigned long *)host->sg_dma);
-	set_dma_x_count(host->dma_ch, 0);
-	set_dma_x_modify(host->dma_ch, 0);
-	SSYNC();
-	set_dma_config(host->dma_ch, dma_cfg);
-#elif defined(CONFIG_BF51x)
-	/* RSI DMA doesn't work in array mode */
-	dma_cfg |= WDSIZE_32 | DMAEN;
-	set_dma_start_addr(host->dma_ch, sg_dma_address(&data->sg[0]));
-	set_dma_x_count(host->dma_ch, length / 4);
-	set_dma_x_modify(host->dma_ch, 4);
-	SSYNC();
-	set_dma_config(host->dma_ch, dma_cfg);
-#endif
-	bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E);
-
-	SSYNC();
-
-	dev_dbg(mmc_dev(host->mmc), "%s exit\n", __func__);
-	return 0;
-}
-
-static void sdh_start_cmd(struct sdh_host *host, struct mmc_command *cmd)
-{
-	unsigned int sdh_cmd;
-	unsigned int stat_mask;
-
-	dev_dbg(mmc_dev(host->mmc), "%s enter cmd: 0x%p\n", __func__, cmd);
-	WARN_ON(host->cmd != NULL);
-	host->cmd = cmd;
-
-	sdh_cmd = 0;
-	stat_mask = 0;
-
-	sdh_cmd |= cmd->opcode;
-
-	if (cmd->flags & MMC_RSP_PRESENT) {
-		sdh_cmd |= CMD_RSP;
-		stat_mask |= CMD_RESP_END;
-	} else {
-		stat_mask |= CMD_SENT;
-	}
-
-	if (cmd->flags & MMC_RSP_136)
-		sdh_cmd |= CMD_L_RSP;
-
-	stat_mask |= CMD_CRC_FAIL | CMD_TIME_OUT;
-
-	sdh_enable_stat_irq(host, stat_mask);
-
-	bfin_write_SDH_ARGUMENT(cmd->arg);
-	bfin_write_SDH_COMMAND(sdh_cmd | CMD_E);
-	bfin_write_SDH_CLK_CTL(bfin_read_SDH_CLK_CTL() | CLK_E);
-	SSYNC();
-}
-
-static void sdh_finish_request(struct sdh_host *host, struct mmc_request *mrq)
-{
-	dev_dbg(mmc_dev(host->mmc), "%s enter\n", __func__);
-	host->mrq = NULL;
-	host->cmd = NULL;
-	host->data = NULL;
-	mmc_request_done(host->mmc, mrq);
-}
-
-static int sdh_cmd_done(struct sdh_host *host, unsigned int stat)
-{
-	struct mmc_command *cmd = host->cmd;
-	int ret = 0;
-
-	dev_dbg(mmc_dev(host->mmc), "%s enter cmd: %p\n", __func__, cmd);
-	if (!cmd)
-		return 0;
-
-	host->cmd = NULL;
-
-	if (cmd->flags & MMC_RSP_PRESENT) {
-		cmd->resp[0] = bfin_read_SDH_RESPONSE0();
-		if (cmd->flags & MMC_RSP_136) {
-			cmd->resp[1] = bfin_read_SDH_RESPONSE1();
-			cmd->resp[2] = bfin_read_SDH_RESPONSE2();
-			cmd->resp[3] = bfin_read_SDH_RESPONSE3();
-		}
-	}
-	if (stat & CMD_TIME_OUT)
-		cmd->error = -ETIMEDOUT;
-	else if (stat & CMD_CRC_FAIL && cmd->flags & MMC_RSP_CRC)
-		cmd->error = -EILSEQ;
-
-	sdh_disable_stat_irq(host, (CMD_SENT | CMD_RESP_END | CMD_TIME_OUT | CMD_CRC_FAIL));
-
-	if (host->data && !cmd->error) {
-		if (host->data->flags & MMC_DATA_WRITE) {
-			ret = sdh_setup_data(host, host->data);
-			if (ret)
-				return 0;
-		}
-
-		sdh_enable_stat_irq(host, DAT_END | RX_OVERRUN | TX_UNDERRUN | DAT_TIME_OUT);
-	} else
-		sdh_finish_request(host, host->mrq);
-
-	return 1;
-}
-
-static int sdh_data_done(struct sdh_host *host, unsigned int stat)
-{
-	struct mmc_data *data = host->data;
-
-	dev_dbg(mmc_dev(host->mmc), "%s enter stat: 0x%x\n", __func__, stat);
-	if (!data)
-		return 0;
-
-	disable_dma(host->dma_ch);
-	dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
-		     host->dma_dir);
-
-	if (stat & DAT_TIME_OUT)
-		data->error = -ETIMEDOUT;
-	else if (stat & DAT_CRC_FAIL)
-		data->error = -EILSEQ;
-	else if (stat & (RX_OVERRUN | TX_UNDERRUN))
-		data->error = -EIO;
-
-	if (!data->error)
-		data->bytes_xfered = data->blocks * data->blksz;
-	else
-		data->bytes_xfered = 0;
-
-	bfin_write_SDH_STATUS_CLR(DAT_END_STAT | DAT_TIMEOUT_STAT | \
-			DAT_CRC_FAIL_STAT | DAT_BLK_END_STAT | RX_OVERRUN | TX_UNDERRUN);
-	bfin_write_SDH_DATA_CTL(0);
-	SSYNC();
-
-	host->data = NULL;
-	if (host->mrq->stop) {
-		sdh_stop_clock(host);
-		sdh_start_cmd(host, host->mrq->stop);
-	} else {
-		sdh_finish_request(host, host->mrq);
-	}
-
-	return 1;
-}
-
-static void sdh_request(struct mmc_host *mmc, struct mmc_request *mrq)
-{
-	struct sdh_host *host = mmc_priv(mmc);
-	int ret = 0;
-
-	dev_dbg(mmc_dev(host->mmc), "%s enter, mrp:%p, cmd:%p\n", __func__, mrq, mrq->cmd);
-	WARN_ON(host->mrq != NULL);
-
-	spin_lock(&host->lock);
-	host->mrq = mrq;
-	host->data = mrq->data;
-
-	if (mrq->data && mrq->data->flags & MMC_DATA_READ) {
-		ret = sdh_setup_data(host, mrq->data);
-		if (ret)
-			goto data_err;
-	}
-
-	sdh_start_cmd(host, mrq->cmd);
-data_err:
-	spin_unlock(&host->lock);
-}
-
-static void sdh_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-{
-	struct sdh_host *host;
-	u16 clk_ctl = 0;
-#ifndef RSI_BLKSZ
-	u16 pwr_ctl = 0;
-#endif
-	u16 cfg;
-	host = mmc_priv(mmc);
-
-	spin_lock(&host->lock);
-
-	cfg = bfin_read_SDH_CFG();
-	cfg |= MWE;
-	switch (ios->bus_width) {
-	case MMC_BUS_WIDTH_4:
-#ifndef RSI_BLKSZ
-		cfg &= ~PD_SDDAT3;
-#endif
-		cfg |= PUP_SDDAT3;
-		/* Enable 4 bit SDIO */
-		cfg |= SD4E;
-		clk_ctl |= WIDE_BUS_4;
-		break;
-	case MMC_BUS_WIDTH_8:
-#ifndef RSI_BLKSZ
-		cfg &= ~PD_SDDAT3;
-#endif
-		cfg |= PUP_SDDAT3;
-		/* Disable 4 bit SDIO */
-		cfg &= ~SD4E;
-		clk_ctl |= BYTE_BUS_8;
-		break;
-	default:
-		cfg &= ~PUP_SDDAT3;
-		/* Disable 4 bit SDIO */
-		cfg &= ~SD4E;
-	}
-	bfin_write_SDH_CFG(cfg);
-
-	host->power_mode = ios->power_mode;
-#ifndef RSI_BLKSZ
-	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
-		pwr_ctl |= ROD_CTL;
-# ifndef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
-		pwr_ctl |= SD_CMD_OD;
-# endif
-	}
-
-	if (ios->power_mode != MMC_POWER_OFF)
-		pwr_ctl |= PWR_ON;
-	else
-		pwr_ctl &= ~PWR_ON;
-
-	bfin_write_SDH_PWR_CTL(pwr_ctl);
-#else
-# ifndef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
-	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
-		cfg |= SD_CMD_OD;
-	else
-		cfg &= ~SD_CMD_OD;
-# endif
-
-	if (ios->power_mode != MMC_POWER_OFF)
-		cfg |= PWR_ON;
-	else
-		cfg &= ~PWR_ON;
-
-	bfin_write_SDH_CFG(cfg);
-#endif
-	SSYNC();
-
-	if (ios->power_mode == MMC_POWER_ON && ios->clock) {
-		unsigned char clk_div;
-		clk_div = (get_sclk() / ios->clock - 1) / 2;
-		clk_div = min_t(unsigned char, clk_div, 0xFF);
-		clk_ctl |= clk_div;
-		clk_ctl |= CLK_E;
-		host->clk_div = clk_div;
-		bfin_write_SDH_CLK_CTL(clk_ctl);
-	} else
-		sdh_stop_clock(host);
-
-	/* set up sdh interrupt mask*/
-	if (ios->power_mode == MMC_POWER_ON)
-		bfin_write_SDH_MASK0(DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL |
-			RX_OVERRUN | TX_UNDERRUN | CMD_SENT | CMD_RESP_END |
-			CMD_TIME_OUT | CMD_CRC_FAIL);
-	else
-		bfin_write_SDH_MASK0(0);
-	SSYNC();
-
-	spin_unlock(&host->lock);
-
-	dev_dbg(mmc_dev(host->mmc), "SDH: clk_div = 0x%x actual clock:%ld expected clock:%d\n",
-		host->clk_div,
-		host->clk_div ? get_sclk() / (2 * (host->clk_div + 1)) : 0,
-		ios->clock);
-}
-
-static const struct mmc_host_ops sdh_ops = {
-	.request	= sdh_request,
-	.set_ios	= sdh_set_ios,
-};
-
-static irqreturn_t sdh_dma_irq(int irq, void *devid)
-{
-	struct sdh_host *host = devid;
-
-	dev_dbg(mmc_dev(host->mmc), "%s enter, irq_stat: 0x%04lx\n", __func__,
-		get_dma_curr_irqstat(host->dma_ch));
-	clear_dma_irqstat(host->dma_ch);
-	SSYNC();
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t sdh_stat_irq(int irq, void *devid)
-{
-	struct sdh_host *host = devid;
-	unsigned int status;
-	int handled = 0;
-
-	dev_dbg(mmc_dev(host->mmc), "%s enter\n", __func__);
-
-	spin_lock(&host->lock);
-
-	status = bfin_read_SDH_E_STATUS();
-	if (status & SD_CARD_DET) {
-		mmc_detect_change(host->mmc, 0);
-		bfin_write_SDH_E_STATUS(SD_CARD_DET);
-	}
-	status = bfin_read_SDH_STATUS();
-	if (status & (CMD_SENT | CMD_RESP_END | CMD_TIME_OUT | CMD_CRC_FAIL)) {
-		handled |= sdh_cmd_done(host, status);
-		bfin_write_SDH_STATUS_CLR(CMD_SENT_STAT | CMD_RESP_END_STAT | \
-				CMD_TIMEOUT_STAT | CMD_CRC_FAIL_STAT);
-		SSYNC();
-	}
-
-	status = bfin_read_SDH_STATUS();
-	if (status & (DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN | TX_UNDERRUN))
-		handled |= sdh_data_done(host, status);
-
-	spin_unlock(&host->lock);
-
-	dev_dbg(mmc_dev(host->mmc), "%s exit\n\n", __func__);
-
-	return IRQ_RETVAL(handled);
-}
-
-static void sdh_reset(void)
-{
-#if defined(CONFIG_BF54x)
-	/* Secure Digital Host shares DMA with Nand controller */
-	bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
-#endif
-
-	bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
-	SSYNC();
-
-	/* Disable card inserting detection pin. set MMC_CAP_NEEDS_POLL, and
-	 * mmc stack will do the detection.
-	 */
-	bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3));
-	SSYNC();
-}
-
-static int sdh_probe(struct platform_device *pdev)
-{
-	struct mmc_host *mmc;
-	struct sdh_host *host;
-	struct bfin_sd_host *drv_data = get_sdh_data(pdev);
-	int ret;
-
-	if (!drv_data) {
-		dev_err(&pdev->dev, "missing platform driver data\n");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	mmc = mmc_alloc_host(sizeof(struct sdh_host), &pdev->dev);
-	if (!mmc) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	mmc->ops = &sdh_ops;
-#if defined(CONFIG_BF51x)
-	mmc->max_segs = 1;
-#else
-	mmc->max_segs = PAGE_SIZE / sizeof(struct dma_desc_array);
-#endif
-#ifdef RSI_BLKSZ
-	mmc->max_seg_size = -1;
-#else
-	mmc->max_seg_size = 1 << 16;
-#endif
-	mmc->max_blk_size = 1 << 11;
-	mmc->max_blk_count = 1 << 11;
-	mmc->max_req_size = PAGE_SIZE;
-	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-	mmc->f_max = get_sclk();
-	mmc->f_min = mmc->f_max >> 9;
-	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NEEDS_POLL;
-	host = mmc_priv(mmc);
-	host->mmc = mmc;
-	host->sclk = get_sclk();
-
-	spin_lock_init(&host->lock);
-	host->irq = drv_data->irq_int0;
-	host->dma_ch = drv_data->dma_chan;
-
-	ret = request_dma(host->dma_ch, DRIVER_NAME "DMA");
-	if (ret) {
-		dev_err(&pdev->dev, "unable to request DMA channel\n");
-		goto out1;
-	}
-
-	ret = set_dma_callback(host->dma_ch, sdh_dma_irq, host);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to request DMA irq\n");
-		goto out2;
-	}
-
-	host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
-	if (host->sg_cpu == NULL) {
-		ret = -ENOMEM;
-		goto out2;
-	}
-
-	platform_set_drvdata(pdev, mmc);
-
-	ret = request_irq(host->irq, sdh_stat_irq, 0, "SDH Status IRQ", host);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to request status irq\n");
-		goto out3;
-	}
-
-	ret = peripheral_request_list(drv_data->pin_req, DRIVER_NAME);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to request peripheral pins\n");
-		goto out4;
-	}
-
-	sdh_reset();
-
-	mmc_add_host(mmc);
-	return 0;
-
-out4:
-	free_irq(host->irq, host);
-out3:
-	mmc_remove_host(mmc);
-	dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
-out2:
-	free_dma(host->dma_ch);
-out1:
-	mmc_free_host(mmc);
- out:
-	return ret;
-}
-
-static int sdh_remove(struct platform_device *pdev)
-{
-	struct mmc_host *mmc = platform_get_drvdata(pdev);
-
-	if (mmc) {
-		struct sdh_host *host = mmc_priv(mmc);
-
-		mmc_remove_host(mmc);
-
-		sdh_stop_clock(host);
-		free_irq(host->irq, host);
-		free_dma(host->dma_ch);
-		dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
-
-		mmc_free_host(mmc);
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int sdh_suspend(struct platform_device *dev, pm_message_t state)
-{
-	struct bfin_sd_host *drv_data = get_sdh_data(dev);
-
-	peripheral_free_list(drv_data->pin_req);
-
-	return 0;
-}
-
-static int sdh_resume(struct platform_device *dev)
-{
-	struct bfin_sd_host *drv_data = get_sdh_data(dev);
-	int ret = 0;
-
-	ret = peripheral_request_list(drv_data->pin_req, DRIVER_NAME);
-	if (ret) {
-		dev_err(&dev->dev, "unable to request peripheral pins\n");
-		return ret;
-	}
-
-	sdh_reset();
-	return ret;
-}
-#else
-# define sdh_suspend NULL
-# define sdh_resume  NULL
-#endif
-
-static struct platform_driver sdh_driver = {
-	.probe   = sdh_probe,
-	.remove  = sdh_remove,
-	.suspend = sdh_suspend,
-	.resume  = sdh_resume,
-	.driver  = {
-		.name = DRIVER_NAME,
-	},
-};
-
-module_platform_driver(sdh_driver);
-
-MODULE_DESCRIPTION("Blackfin Secure Digital Host Driver");
-MODULE_AUTHOR("Cliff Cai, Roy Huang");
-MODULE_LICENSE("GPL");