Merge tag 'mmc-updates-for-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.14:

  Core:
   - Avoid get_cd() on cards marked nonremovable

  Drivers:
   - arasan: New driver for controllers found in e.g. Xilinx Zynq SoC
   - dwmmc: Support Hisilicon K3 SoC controllers
   - esdhc-imx: Support for HS200 mode, DDR modes on MX6, runtime PM
   - sdhci-pci: Support O2Micro/BayHubTech controllers used in laptops
     like Lenovo ThinkPad W540, Dell Latitude E5440, Dell Latitude E6540
   - tegra: Support Tegra124 SoCs"

* tag 'mmc-updates-for-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (55 commits)
  mmc: sdhci-pci: Fix possibility of chip->fixes being null
  mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspend
  mmc: sdhci: Allow for long command timeouts
  mmc: sdio: add a quirk for broken SDIO_CCCR_INTx polling
  mmc: sdhci: fix lockdep error in tuning routine
  mmc: dw_mmc: k3: remove clk_table
  mmc: dw_mmc: fix dw_mci_get_cd
  mmc: dw_mmc: fix sparse non static symbol warning
  mmc: sdhci-esdhc-imx: fix warning during module remove function
  mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context
  mmc: core: sd: implement proper support for sd3.0 au sizes
  mmc: atmel-mci: add vmmc-supply support
  mmc: sdhci-pci: add broken HS200 quirk for Intel Merrifield
  mmc: sdhci: add quirk for broken HS200 support
  mmc: arasan: Add driver for Arasan SDHCI
  mmc: dw_mmc: add dw_mmc-k3 for k3 platform
  mmc: dw_mmc: use slot-gpio to handle cd pin
  mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts
  mmc: sdhci-pci: break out definitions to header file
  mmc: tmio: fixup compile error
  ...

Conflicts:
	MAINTAINERS

5 files changed, 45 insertions, 22 deletions

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 57a2b403bf8e..098374b1ab2b 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2460,7 +2460,8 @@ void mmc_rescan(struct work_struct *work)
 	 */
 	mmc_bus_put(host);
 
-	if (host->ops->get_cd && host->ops->get_cd(host) == 0) {
+	if (!(host->caps & MMC_CAP_NONREMOVABLE) && host->ops->get_cd &&
+			host->ops->get_cd(host) == 0) {
 		mmc_claim_host(host);
 		mmc_power_off(host);
 		mmc_release_host(host);
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index f631f5a9bf79..98e9eb0f6643 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1119,14 +1119,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	 */
 	if (mmc_card_highspeed(card)) {
 		if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V)
-			&& ((host->caps & (MMC_CAP_1_8V_DDR |
-			     MMC_CAP_UHS_DDR50))
-				== (MMC_CAP_1_8V_DDR | MMC_CAP_UHS_DDR50)))
+			&& (host->caps & MMC_CAP_1_8V_DDR))
 				ddr = MMC_1_8V_DDR_MODE;
 		else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_2V)
-			&& ((host->caps & (MMC_CAP_1_2V_DDR |
-			     MMC_CAP_UHS_DDR50))
-				== (MMC_CAP_1_2V_DDR | MMC_CAP_UHS_DDR50)))
+			&& (host->caps & MMC_CAP_1_2V_DDR))
 				ddr = MMC_1_2V_DDR_MODE;
 	}
 
diff --git a/drivers/mmc/core/quirks.c b/drivers/mmc/core/quirks.c
index 06ee1aeaacec..6c36fccaa1ec 100644
--- a/drivers/mmc/core/quirks.c
+++ b/drivers/mmc/core/quirks.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/export.h>
 #include <linux/mmc/card.h>
+#include <linux/mmc/sdio_ids.h>
 
 #ifndef SDIO_VENDOR_ID_TI
 #define SDIO_VENDOR_ID_TI		0x0097
@@ -30,6 +31,10 @@
 #define SDIO_DEVICE_ID_STE_CW1200	0x2280
 #endif
 
+#ifndef SDIO_DEVICE_ID_MARVELL_8797_F0
+#define SDIO_DEVICE_ID_MARVELL_8797_F0	0x9128
+#endif
+
 /*
  * This hook just adds a quirk for all sdio devices
  */
@@ -58,6 +63,9 @@ static const struct mmc_fixup mmc_fixup_methods[] = {
 	SDIO_FIXUP(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200,
 		   add_quirk, MMC_QUIRK_BROKEN_BYTE_MODE_512),
 
+	SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797_F0,
+		   add_quirk, MMC_QUIRK_BROKEN_IRQ_POLLING),
+
 	END_FIXUP
 };
 
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 6f42050b7ccc..692fdb177294 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/err.h>
+#include <linux/sizes.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
 #include <linux/pm_runtime.h>
@@ -45,6 +46,13 @@ static const unsigned int tacc_mant[] = {
 	35,	40,	45,	50,	55,	60,	70,	80,
 };
 
+static const unsigned int sd_au_size[] = {
+	0,		SZ_16K / 512,		SZ_32K / 512,	SZ_64K / 512,
+	SZ_128K / 512,	SZ_256K / 512,		SZ_512K / 512,	SZ_1M / 512,
+	SZ_2M / 512,	SZ_4M / 512,		SZ_8M / 512,	(SZ_8M + SZ_4M) / 512,
+	SZ_16M / 512,	(SZ_16M + SZ_8M) / 512,	SZ_32M / 512,	SZ_64M / 512,
+};
+
 #define UNSTUFF_BITS(resp,start,size)					\
 	({								\
 		const int __size = size;				\
@@ -216,7 +224,7 @@ static int mmc_decode_scr(struct mmc_card *card)
 static int mmc_read_ssr(struct mmc_card *card)
 {
 	unsigned int au, es, et, eo;
-	int err, i, max_au;
+	int err, i;
 	u32 *ssr;
 
 	if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
@@ -240,26 +248,25 @@ static int mmc_read_ssr(struct mmc_card *card)
 	for (i = 0; i < 16; i++)
 		ssr[i] = be32_to_cpu(ssr[i]);
 
-	/* SD3.0 increases max AU size to 64MB (0xF) from 4MB (0x9) */
-	max_au = card->scr.sda_spec3 ? 0xF : 0x9;
-
 	/*
 	 * UNSTUFF_BITS only works with four u32s so we have to offset the
 	 * bitfield positions accordingly.
 	 */
 	au = UNSTUFF_BITS(ssr, 428 - 384, 4);
-	if (au > 0 && au <= max_au) {
-		card->ssr.au = 1 << (au + 4);
-		es = UNSTUFF_BITS(ssr, 408 - 384, 16);
-		et = UNSTUFF_BITS(ssr, 402 - 384, 6);
-		eo = UNSTUFF_BITS(ssr, 400 - 384, 2);
-		if (es && et) {
-			card->ssr.erase_timeout = (et * 1000) / es;
-			card->ssr.erase_offset = eo * 1000;
+	if (au) {
+		if (au <= 9 || card->scr.sda_spec3) {
+			card->ssr.au = sd_au_size[au];
+			es = UNSTUFF_BITS(ssr, 408 - 384, 16);
+			et = UNSTUFF_BITS(ssr, 402 - 384, 6);
+			if (es && et) {
+				eo = UNSTUFF_BITS(ssr, 400 - 384, 2);
+				card->ssr.erase_timeout = (et * 1000) / es;
+				card->ssr.erase_offset = eo * 1000;
+			}
+		} else {
+			pr_warning("%s: SD Status: Invalid Allocation Unit size.\n",
+				   mmc_hostname(card->host));
 		}
-	} else {
-		pr_warning("%s: SD Status: Invalid Allocation Unit "
-			"size.\n", mmc_hostname(card->host));
 	}
 out:
 	kfree(ssr);
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index 3d8ceb4084de..aaa90460ed23 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -53,6 +53,17 @@ static int process_sdio_pending_irqs(struct mmc_host *host)
 		return ret;
 	}
 
+	if (pending && mmc_card_broken_irq_polling(card) &&
+	    !(host->caps & MMC_CAP_SDIO_IRQ)) {
+		unsigned char dummy;
+
+		/* A fake interrupt could be created when we poll SDIO_CCCR_INTx
+		 * register with a Marvell SD8797 card. A dummy CMD52 read to
+		 * function 0 register 0xff can avoid this.
+		 */
+		mmc_io_rw_direct(card, 0, 0, 0xff, 0, &dummy);
+	}
+
 	count = 0;
 	for (i = 1; i <= 7; i++) {
 		if (pending & (1 << i)) {