diff options
author | Hans de Goede <hdegoede@redhat.com> | 2014-11-20 12:10:47 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@osg.samsung.com> | 2015-01-29 18:26:31 -0200 |
commit | a4bca4c7ad36a4cdafc87d1dce3758cdccef1ca7 (patch) | |
tree | 57f288efe59227906e53463052d6b70374f14022 /drivers/media/rc | |
parent | 44f8af68469a9a7c8507fade3e4ca4bba58c2ff1 (diff) |
[media] rc: sunxi-cir: Add support for the larger fifo found on sun5i and sun6i
Add support for the larger fifo found on sun5i and sun6i, having a separate
compatible for the ir found on sun5i & sun6i also is useful if we ever want
to add ir transmit support, because the sun5i & sun6i version do not have
transmit support.
Note this commits also adds checking for the end-of-packet interrupt flag
(which was already enabled), as the fifo-data-available interrupt flag only
gets set when the trigger-level is exceeded. So far we've been getting away
with not doing this because of the low trigger-level, but this is something
which we should have done since day one.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Diffstat (limited to 'drivers/media/rc')
-rw-r--r-- | drivers/media/rc/sunxi-cir.c | 21 |
1 files changed, 12 insertions, 9 deletions
diff --git a/drivers/media/rc/sunxi-cir.c b/drivers/media/rc/sunxi-cir.c index 06170e01a5e9..7830aef3db45 100644 --- a/drivers/media/rc/sunxi-cir.c +++ b/drivers/media/rc/sunxi-cir.c @@ -56,12 +56,12 @@ #define REG_RXINT_RAI_EN BIT(4) /* Rx FIFO available byte level */ -#define REG_RXINT_RAL(val) (((val) << 8) & (GENMASK(11, 8))) +#define REG_RXINT_RAL(val) ((val) << 8) /* Rx Interrupt Status */ #define SUNXI_IR_RXSTA_REG 0x30 /* RX FIFO Get Available Counter */ -#define REG_RXSTA_GET_AC(val) (((val) >> 8) & (GENMASK(5, 0))) +#define REG_RXSTA_GET_AC(val) (((val) >> 8) & (ir->fifo_size * 2 - 1)) /* Clear all interrupt status value */ #define REG_RXSTA_CLEARALL 0xff @@ -72,10 +72,6 @@ /* CIR_REG register idle threshold */ #define REG_CIR_ITHR(val) (((val) << 8) & (GENMASK(15, 8))) -/* Hardware supported fifo size */ -#define SUNXI_IR_FIFO_SIZE 16 -/* How many messages in FIFO trigger IRQ */ -#define TRIGGER_LEVEL 8 /* Required frequency for IR0 or IR1 clock in CIR mode */ #define SUNXI_IR_BASE_CLK 8000000 /* Frequency after IR internal divider */ @@ -94,6 +90,7 @@ struct sunxi_ir { struct rc_dev *rc; void __iomem *base; int irq; + int fifo_size; struct clk *clk; struct clk *apb_clk; struct reset_control *rst; @@ -115,11 +112,11 @@ static irqreturn_t sunxi_ir_irq(int irqno, void *dev_id) /* clean all pending statuses */ writel(status | REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG); - if (status & REG_RXINT_RAI_EN) { + if (status & (REG_RXINT_RAI_EN | REG_RXINT_RPEI_EN)) { /* How many messages in fifo */ rc = REG_RXSTA_GET_AC(status); /* Sanity check */ - rc = rc > SUNXI_IR_FIFO_SIZE ? SUNXI_IR_FIFO_SIZE : rc; + rc = rc > ir->fifo_size ? ir->fifo_size : rc; /* If we have data */ for (cnt = 0; cnt < rc; cnt++) { /* for each bit in fifo */ @@ -156,6 +153,11 @@ static int sunxi_ir_probe(struct platform_device *pdev) if (!ir) return -ENOMEM; + if (of_device_is_compatible(dn, "allwinner,sun5i-a13-ir")) + ir->fifo_size = 64; + else + ir->fifo_size = 16; + /* Clock */ ir->apb_clk = devm_clk_get(dev, "apb"); if (IS_ERR(ir->apb_clk)) { @@ -271,7 +273,7 @@ static int sunxi_ir_probe(struct platform_device *pdev) * level */ writel(REG_RXINT_ROI_EN | REG_RXINT_RPEI_EN | - REG_RXINT_RAI_EN | REG_RXINT_RAL(TRIGGER_LEVEL - 1), + REG_RXINT_RAI_EN | REG_RXINT_RAL(ir->fifo_size / 2 - 1), ir->base + SUNXI_IR_RXINT_REG); /* Enable IR Module */ @@ -319,6 +321,7 @@ static int sunxi_ir_remove(struct platform_device *pdev) static const struct of_device_id sunxi_ir_match[] = { { .compatible = "allwinner,sun4i-a10-ir", }, + { .compatible = "allwinner,sun5i-a13-ir", }, {}, }; |