iio: accel: bma180: Add support for bma023

The bma023 chip is similar enough to the bma180 and bma25x that the
same driver can support all of them.  The biggest differences are
the lack of a temperature channel and no low power but still working
mode.

The bma150 is a close relative of the bma023, but it does have a
temperature channel so support is not added for it.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

2 files changed, 122 insertions, 7 deletions

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 67c35b6eb910..3fe7a74fc592 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -89,13 +89,13 @@ config ADXL372_I2C
 	  module will be called adxl372_i2c.
 
 config BMA180
-	tristate "Bosch BMA180/BMA25x 3-Axis Accelerometer Driver"
+	tristate "Bosch BMA023/BMA180/BMA25x 3-Axis Accelerometer Driver"
 	depends on I2C && INPUT_BMA150=n
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
-	  Say Y here if you want to build a driver for the Bosch BMA180 or
-	  BMA25x triaxial acceleration sensor.
+	  Say Y here if you want to build a driver for the Bosch BMA023, BMA180
+	  or BMA25x triaxial acceleration sensor.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called bma180.
diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index 75440dd83ec4..19d4f174a890 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -7,6 +7,7 @@
  * Support for BMA250 (c) Peter Meerwald <pmeerw@pmeerw.net>
  *
  * SPI is not supported by driver
+ * BMA023: 7-bit I2C slave address 0x38
  * BMA180: 7-bit I2C slave address 0x40 or 0x41
  * BMA250: 7-bit I2C slave address 0x18 or 0x19
  * BMA254: 7-bit I2C slave address 0x18 or 0x19
@@ -33,6 +34,7 @@
 #define BMA180_IRQ_NAME "bma180_event"
 
 enum chip_ids {
+	BMA023,
 	BMA180,
 	BMA250,
 	BMA254,
@@ -64,6 +66,18 @@ struct bma180_part_info {
 };
 
 /* Register set */
+#define BMA023_CTRL_REG0	0x0a
+#define BMA023_CTRL_REG1	0x0b
+#define BMA023_CTRL_REG2	0x14
+#define BMA023_CTRL_REG3	0x15
+
+#define BMA023_RANGE_MASK	GENMASK(4, 3) /* Range of accel values */
+#define BMA023_BW_MASK		GENMASK(2, 0) /* Accel bandwidth */
+#define BMA023_SLEEP		BIT(0)
+#define BMA023_INT_RESET_MASK	BIT(6)
+#define BMA023_NEW_DATA_INT	BIT(5) /* Intr every new accel data is ready */
+#define BMA023_RESET_VAL	BIT(1)
+
 #define BMA180_CHIP_ID		0x00 /* Need to distinguish BMA180 from other */
 #define BMA180_ACC_X_LSB	0x02 /* First of 6 registers of accel data */
 #define BMA180_TEMP		0x08
@@ -94,6 +108,7 @@ struct bma180_part_info {
 /* We have to write this value in reset register to do soft reset */
 #define BMA180_RESET_VAL	0xb6
 
+#define BMA023_ID_REG_VAL	0x02
 #define BMA180_ID_REG_VAL	0x03
 #define BMA250_ID_REG_VAL	0x03
 #define BMA254_ID_REG_VAL	0xfa /* 250 decimal */
@@ -156,6 +171,9 @@ enum bma180_chan {
 	TEMP
 };
 
+static int bma023_bw_table[] = { 25, 50, 100, 190, 375, 750, 1500 }; /* Hz */
+static int bma023_scale_table[] = { 2452, 4903, 9709, };
+
 static int bma180_bw_table[] = { 10, 20, 40, 75, 150, 300 }; /* Hz */
 static int bma180_scale_table[] = { 1275, 1863, 2452, 3727, 4903, 9709, 19417 };
 
@@ -350,11 +368,28 @@ static int bma180_chip_init(struct bma180_data *data)
 	 */
 	msleep(20);
 
-	ret = bma180_set_new_data_intr_state(data, false);
+	return bma180_set_new_data_intr_state(data, false);
+}
+
+static int bma023_chip_config(struct bma180_data *data)
+{
+	int ret = bma180_chip_init(data);
+
 	if (ret)
-		return ret;
+		goto err;
+
+	ret = bma180_set_bw(data, 50); /* 50 Hz */
+	if (ret)
+		goto err;
+	ret = bma180_set_scale(data, 2452); /* 2 G */
+	if (ret)
+		goto err;
 
-	return bma180_set_pmode(data, false);
+	return 0;
+
+err:
+	dev_err(&data->client->dev, "failed to config the chip\n");
+	return ret;
 }
 
 static int bma180_chip_config(struct bma180_data *data)
@@ -363,6 +398,9 @@ static int bma180_chip_config(struct bma180_data *data)
 
 	if (ret)
 		goto err;
+	ret = bma180_set_pmode(data, false);
+	if (ret)
+		goto err;
 	ret = bma180_set_bits(data, BMA180_CTRL_REG0, BMA180_DIS_WAKE_UP, 1);
 	if (ret)
 		goto err;
@@ -392,6 +430,9 @@ static int bma25x_chip_config(struct bma180_data *data)
 
 	if (ret)
 		goto err;
+	ret = bma180_set_pmode(data, false);
+	if (ret)
+		goto err;
 	ret = bma180_set_bw(data, 16); /* 16 Hz */
 	if (ret)
 		goto err;
@@ -414,6 +455,17 @@ err:
 	return ret;
 }
 
+static void bma023_chip_disable(struct bma180_data *data)
+{
+	if (bma180_set_sleep_state(data, true))
+		goto err;
+
+	return;
+
+err:
+	dev_err(&data->client->dev, "failed to disable the chip\n");
+}
+
 static void bma180_chip_disable(struct bma180_data *data)
 {
 	if (bma180_set_new_data_intr_state(data, false))
@@ -610,6 +662,11 @@ static const struct iio_enum bma180_power_mode_enum = {
 	.set = bma180_set_power_mode,
 };
 
+static const struct iio_chan_spec_ext_info bma023_ext_info[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, bma180_accel_get_mount_matrix),
+	{ }
+};
+
 static const struct iio_chan_spec_ext_info bma180_ext_info[] = {
 	IIO_ENUM("power_mode", true, &bma180_power_mode_enum),
 	IIO_ENUM_AVAILABLE("power_mode", &bma180_power_mode_enum),
@@ -617,6 +674,23 @@ static const struct iio_chan_spec_ext_info bma180_ext_info[] = {
 	{ }
 };
 
+#define BMA023_ACC_CHANNEL(_axis, _bits) {				\
+	.type = IIO_ACCEL,						\
+	.modified = 1,							\
+	.channel2 = IIO_MOD_##_axis,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |		\
+		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),	\
+	.scan_index = AXIS_##_axis,					\
+	.scan_type = {							\
+		.sign = 's',						\
+		.realbits = _bits,					\
+		.storagebits = 16,					\
+		.shift = 16 - _bits,					\
+	},								\
+	.ext_info = bma023_ext_info,					\
+}
+
 #define BMA180_ACC_CHANNEL(_axis, _bits) {				\
 	.type = IIO_ACCEL,						\
 	.modified = 1,							\
@@ -646,6 +720,13 @@ static const struct iio_chan_spec_ext_info bma180_ext_info[] = {
 	},								\
 }
 
+static const struct iio_chan_spec bma023_channels[] = {
+	BMA023_ACC_CHANNEL(X, 10),
+	BMA023_ACC_CHANNEL(Y, 10),
+	BMA023_ACC_CHANNEL(Z, 10),
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
 static const struct iio_chan_spec bma180_channels[] = {
 	BMA180_ACC_CHANNEL(X, 14),
 	BMA180_ACC_CHANNEL(Y, 14),
@@ -671,6 +752,35 @@ static const struct iio_chan_spec bma254_channels[] = {
 };
 
 static const struct bma180_part_info bma180_part_info[] = {
+	[BMA023] = {
+		.chip_id = BMA023_ID_REG_VAL,
+		.channels = bma023_channels,
+		.num_channels = ARRAY_SIZE(bma023_channels),
+		.scale_table = bma023_scale_table,
+		.num_scales = ARRAY_SIZE(bma023_scale_table),
+		.bw_table = bma023_bw_table,
+		.num_bw = ARRAY_SIZE(bma023_bw_table),
+		/* No temperature channel */
+		.center_temp = 0,
+		.int_reset_reg = BMA023_CTRL_REG0,
+		.int_reset_mask = BMA023_INT_RESET_MASK,
+		.sleep_reg = BMA023_CTRL_REG0,
+		.sleep_mask = BMA023_SLEEP,
+		.bw_reg = BMA023_CTRL_REG2,
+		.bw_mask = BMA023_BW_MASK,
+		.scale_reg = BMA023_CTRL_REG2,
+		.scale_mask = BMA023_RANGE_MASK,
+		/* No power mode on bma023 */
+		.power_reg = 0,
+		.power_mask = 0,
+		.lowpower_val = 0,
+		.int_enable_reg = BMA023_CTRL_REG3,
+		.int_enable_mask = BMA023_NEW_DATA_INT,
+		.softreset_reg = BMA023_CTRL_REG0,
+		.softreset_val = BMA023_RESET_VAL,
+		.chip_config = bma023_chip_config,
+		.chip_disable = bma023_chip_disable,
+	},
 	[BMA180] = {
 		.chip_id = BMA180_ID_REG_VAL,
 		.channels = bma180_channels,
@@ -994,6 +1104,7 @@ static SIMPLE_DEV_PM_OPS(bma180_pm_ops, bma180_suspend, bma180_resume);
 #endif
 
 static const struct i2c_device_id bma180_ids[] = {
+	{ "bma023", BMA023 },
 	{ "bma180", BMA180 },
 	{ "bma250", BMA250 },
 	{ "bma254", BMA254 },
@@ -1004,6 +1115,10 @@ MODULE_DEVICE_TABLE(i2c, bma180_ids);
 
 static const struct of_device_id bma180_of_match[] = {
 	{
+		.compatible = "bosch,bma023",
+		.data = (void *)BMA023
+	},
+	{
 		.compatible = "bosch,bma180",
 		.data = (void *)BMA180
 	},
@@ -1034,5 +1149,5 @@ module_i2c_driver(bma180_driver);
 
 MODULE_AUTHOR("Kravchenko Oleksandr <x0199363@ti.com>");
 MODULE_AUTHOR("Texas Instruments, Inc.");
-MODULE_DESCRIPTION("Bosch BMA180/BMA25x triaxial acceleration sensor");
+MODULE_DESCRIPTION("Bosch BMA023/BMA180/BMA25x triaxial acceleration sensor");
 MODULE_LICENSE("GPL");