Merge tag 'hwmon-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "Notable changes:
   - new driver for NCT7802Y
   - support for TMP435, LM95233, LM95235, NCT6792D, and NXP LM75B
   - regulator support for PMBus chips, specifically LTX2978
   - support for humidity sensors to iio-hwmon bridge driver

* tag 'hwmon-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (21 commits)
  hwmon: (tmp401) Detect TMP435 on all addresses it supports
  hwmon: (lm75) Strengthen detect function
  hwmon: (gpio-fan) Add a shutdown handler to poweroff the fans
  hwmon: (gpio-fan) Allow usage of gpio operations that may sleep
  hwmon: (tmp401) Bail out from tmp401_probe() in case of write errors
  hwmon: (tmp401) Add support for TI TMP435
  hwmon: (lm95234) Add support for LM95233
  hwmon: (lm95245) Add support for LM95235
  hwmon: (ina2xx) bail-out from ina2xx_probe() in case of configuration errors
  hwmon: (nct6775) Add blank lines after declarations
  hwmon: (nct6775) Add support for NCT6792D
  hwmon: (nct6775) Documentation updates
  hwmon: (lm75) Add support for the NXP LM75B
  hwmon: Driver for Nuvoton NCT7802Y
  hwmon: (ibmpowernv) Convert to module_platform_driver
  hwmon: (ibmpowernv) Use platform 'id_table' to probe the device
  hwmon: (iio_hwmon) Add support for humidity sensors
  hwmon: (ltc2978) Add regulator support
  hwmon: (pmbus) Add regulator support
  hwmon: (pmbus) add helpers for byte write and read modify write
  ...

1 files changed, 20 insertions, 6 deletions

diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index bfd3f3eeabcd..e01feba909c3 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -223,6 +223,7 @@ static int ina2xx_probe(struct i2c_client *client,
 	struct device *hwmon_dev;
 	long shunt = 10000; /* default shunt value 10mOhms */
 	u32 val;
+	int ret;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
 		return -ENODEV;
@@ -247,12 +248,25 @@ static int ina2xx_probe(struct i2c_client *client,
 	data->config = &ina2xx_config[data->kind];
 
 	/* device configuration */
-	i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
-				     data->config->config_default);
-	/* set current LSB to 1mA, shunt is in uOhms */
-	/* (equation 13 in datasheet) */
-	i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
-				     data->config->calibration_factor / shunt);
+	ret = i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
+					   data->config->config_default);
+	if (ret < 0) {
+		dev_err(dev,
+			"error writing to the config register: %d", ret);
+		return -ENODEV;
+	}
+
+	/*
+	 * Set current LSB to 1mA, shunt is in uOhms
+	 * (equation 13 in datasheet).
+	 */
+	ret = i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
+				data->config->calibration_factor / shunt);
+	if (ret < 0) {
+		dev_err(dev,
+			"error writing to the calibration register: %d", ret);
+		return -ENODEV;
+	}
 
 	data->client = client;
 	mutex_init(&data->update_lock);