diff options
| author | Hans de Goede <hdegoede@redhat.com> | 2020-10-26 16:46:06 +0100 |
|---|---|---|
| committer | Jiri Kosina <jkosina@suse.cz> | 2020-10-29 12:48:55 +0100 |
| commit | 5c7e02a896689407555b3a10d6ed87369c70916e (patch) | |
| tree | 75c4f84238929741dc58bb1f81ebcdf4f34ee7ed /drivers/hid | |
| parent | 1811977cb11354aef8cbd13e35ff50db716728a4 (diff) | |
HID: i2c-hid: Put ACPI enumerated devices in D3 on shutdown
The i2c-hid driver would quietly fail to probe the i2c-hid sensor-hub
with an ACPI device-id of SMO91D0 every other boot.
Specifically, the i2c_smbus_read_byte() "Make sure there is something at
this address" check would fail every other boot.
It seems that the BIOS does not properly reset/power-cycle the device
leaving it in a confused state where it refuses to respond to i2c-xfers.
On boots where probing the device failed, the driver-core puts the device
in D3 after the probe-failure, which causes the probe to succeed the next
boot.
Putting the device in D3 from the shutdown-handler fixes the sensors not
working every other boot.
This has been tested on both a Lenovo Miix 2-10 and a Dell Venue 8 Pro 5830
both of which use an i2c-hid sensor-hub with an ACPI id of SMO91D0.
Note that it is safe to call acpi_device_set_power() with a NULL pointer
as first argument, so on none ACPI enumerated devices this change is a
no-op.
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Diffstat (limited to 'drivers/hid')
| -rw-r--r-- | drivers/hid/i2c-hid/i2c-hid-core.c | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c index 786e3e9af1c9..aeff1ffb0c8b 100644 --- a/drivers/hid/i2c-hid/i2c-hid-core.c +++ b/drivers/hid/i2c-hid/i2c-hid-core.c @@ -943,6 +943,11 @@ static void i2c_hid_acpi_enable_wakeup(struct device *dev) } } +static void i2c_hid_acpi_shutdown(struct device *dev) +{ + acpi_device_set_power(ACPI_COMPANION(dev), ACPI_STATE_D3_COLD); +} + static const struct acpi_device_id i2c_hid_acpi_match[] = { {"ACPI0C50", 0 }, {"PNP0C50", 0 }, @@ -959,6 +964,8 @@ static inline int i2c_hid_acpi_pdata(struct i2c_client *client, static inline void i2c_hid_acpi_fix_up_power(struct device *dev) {} static inline void i2c_hid_acpi_enable_wakeup(struct device *dev) {} + +static inline void i2c_hid_acpi_shutdown(struct device *dev) {} #endif #ifdef CONFIG_OF @@ -1175,6 +1182,8 @@ static void i2c_hid_shutdown(struct i2c_client *client) i2c_hid_set_power(client, I2C_HID_PWR_SLEEP); free_irq(client->irq, ihid); + + i2c_hid_acpi_shutdown(&client->dev); } #ifdef CONFIG_PM_SLEEP |