drm/amd/display: create dcn21_link_encoder files

[Why]
DCN20 and DCN21 have different phy programming sequences.

[How]
Create a separate dcn21_link_encoder for Renoir

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

6 files changed, 555 insertions, 4 deletions

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.h
index 0c12395cfa36..239a6c90ffb9 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.h
@@ -250,6 +250,10 @@ struct dcn10_link_enc_registers {
 		type RDPCS_EXT_REFCLK_EN;\
 		type RDPCS_TX_FIFO_EN;\
 		type UNIPHY_LINK_ENABLE;\
+		type UNIPHY_CHANNEL0_XBAR_SOURCE;\
+		type UNIPHY_CHANNEL1_XBAR_SOURCE;\
+		type UNIPHY_CHANNEL2_XBAR_SOURCE;\
+		type UNIPHY_CHANNEL3_XBAR_SOURCE;\
 		type UNIPHY_CHANNEL0_INVERT;\
 		type UNIPHY_CHANNEL1_INVERT;\
 		type UNIPHY_CHANNEL2_INVERT;\
@@ -342,12 +346,41 @@ struct dcn10_link_enc_registers {
 		type RDPCS_PHY_DPALT_DISABLE_ACK;\
 		type RDPCS_PHY_DP_MPLLB_V2I;\
 		type RDPCS_PHY_DP_MPLLB_FREQ_VCO;\
+		type RDPCS_PHY_DP_MPLLB_CP_INT_GS;\
+		type RDPCS_PHY_RX_VREF_CTRL;\
 		type RDPCS_PHY_DP_MPLLB_CP_INT;\
 		type RDPCS_PHY_DP_MPLLB_CP_PROP;\
 		type RDPCS_PHY_RX_REF_LD_VAL;\
 		type RDPCS_PHY_RX_VCO_LD_VAL;\
 		type DPCSTX_DEBUG_CONFIG; \
-		type RDPCSTX_DEBUG_CONFIG
+		type RDPCSTX_DEBUG_CONFIG; \
+		type RDPCS_PHY_DP_TX0_EQ_MAIN;\
+		type RDPCS_PHY_DP_TX0_EQ_PRE;\
+		type RDPCS_PHY_DP_TX0_EQ_POST;\
+		type RDPCS_PHY_DP_TX1_EQ_MAIN;\
+		type RDPCS_PHY_DP_TX1_EQ_PRE;\
+		type RDPCS_PHY_DP_TX1_EQ_POST;\
+		type RDPCS_PHY_DP_TX2_EQ_MAIN;\
+		type RDPCS_PHY_DP_MPLLB_CP_PROP_GS;\
+		type RDPCS_PHY_DP_TX2_EQ_PRE;\
+		type RDPCS_PHY_DP_TX2_EQ_POST;\
+		type RDPCS_PHY_DP_TX3_EQ_MAIN;\
+		type RDPCS_PHY_DCO_RANGE;\
+		type RDPCS_PHY_DCO_FINETUNE;\
+		type RDPCS_PHY_DP_TX3_EQ_PRE;\
+		type RDPCS_PHY_DP_TX3_EQ_POST;\
+		type RDPCS_PHY_SUP_PRE_HP;\
+		type RDPCS_PHY_DP_TX0_VREGDRV_BYP;\
+		type RDPCS_PHY_DP_TX1_VREGDRV_BYP;\
+		type RDPCS_PHY_DP_TX2_VREGDRV_BYP;\
+		type RDPCS_PHY_DP_TX3_VREGDRV_BYP;\
+		type RDPCS_DMCU_DPALT_DIS_BLOCK_REG;\
+		type UNIPHYA_SOFT_RESET;\
+		type UNIPHYB_SOFT_RESET;\
+		type UNIPHYC_SOFT_RESET;\
+		type UNIPHYD_SOFT_RESET;\
+		type UNIPHYE_SOFT_RESET;\
+		type UNIPHYF_SOFT_RESET
 
 #define DCN20_LINK_ENCODER_REG_FIELD_LIST(type) \
 	type DIG_LANE0EN;\
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.h
index 3736b5548a25..0c98a0bbbd14 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.h
@@ -91,6 +91,13 @@ struct mpll_cfg {
 	uint32_t ref_range;
 	uint32_t ref_clk;
 	bool hdmimode_enable;
+	bool sup_pre_hp;
+	bool dp_tx0_vergdrv_byp;
+	bool dp_tx1_vergdrv_byp;
+	bool dp_tx2_vergdrv_byp;
+	bool dp_tx3_vergdrv_byp;
+
+
 };
 
 struct dpcssys_phy_seq_cfg {
diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/Makefile b/drivers/gpu/drm/amd/display/dc/dcn21/Makefile
index 5b8f42ae2334..b7a9285348fb 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/Makefile
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for DCN21.
 
-DCN21 = dcn21_hubp.o dcn21_hubbub.o dcn21_resource.o dcn21_hwseq.o
+DCN21 = dcn21_hubp.o dcn21_hubbub.o dcn21_resource.o dcn21_hwseq.o dcn21_link_encoder.o
 
 CFLAGS_dcn21_resource.o := -mhard-float -msse -mpreferred-stack-boundary=4
 
diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_link_encoder.c
new file mode 100644
index 000000000000..526865c43b48
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_link_encoder.c
@@ -0,0 +1,379 @@
+/*
+ * Copyright 2012-15 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "reg_helper.h"
+
+#include <linux/delay.h>
+#include "core_types.h"
+#include "link_encoder.h"
+#include "dcn21_link_encoder.h"
+#include "stream_encoder.h"
+
+#include "i2caux_interface.h"
+#include "dc_bios_types.h"
+
+#include "gpio_service_interface.h"
+
+#define CTX \
+	enc10->base.ctx
+#define DC_LOGGER \
+	enc10->base.ctx->logger
+
+#define REG(reg)\
+	(enc10->link_regs->reg)
+
+#undef FN
+#define FN(reg_name, field_name) \
+	enc10->link_shift->field_name, enc10->link_mask->field_name
+
+#define IND_REG(index) \
+	(enc10->link_regs->index)
+
+static struct mpll_cfg dcn21_mpll_cfg_ref[] = {
+	// RBR
+	{
+		.hdmimode_enable = 0,
+		.ref_range = 1,
+		.ref_clk_mpllb_div = 1,
+		.mpllb_ssc_en = 1,
+		.mpllb_div5_clk_en = 1,
+		.mpllb_multiplier = 238,
+		.mpllb_fracn_en = 0,
+		.mpllb_fracn_quot = 0,
+		.mpllb_fracn_rem = 0,
+		.mpllb_fracn_den = 1,
+		.mpllb_ssc_up_spread = 0,
+		.mpllb_ssc_peak = 44237,
+		.mpllb_ssc_stepsize = 59454,
+		.mpllb_div_clk_en = 0,
+		.mpllb_div_multiplier = 0,
+		.mpllb_hdmi_div = 0,
+		.mpllb_tx_clk_div = 2,
+		.tx_vboost_lvl = 5,
+		.mpllb_pmix_en = 1,
+		.mpllb_word_div2_en = 0,
+		.mpllb_ana_v2i = 2,
+		.mpllb_ana_freq_vco = 2,
+		.mpllb_ana_cp_int = 9,
+		.mpllb_ana_cp_prop = 15,
+		.hdmi_pixel_clk_div = 0,
+	},
+	// HBR
+	{
+		.hdmimode_enable = 0,
+		.ref_range = 1,
+		.ref_clk_mpllb_div = 1,
+		.mpllb_ssc_en = 1,
+		.mpllb_div5_clk_en = 1,
+		.mpllb_multiplier = 192,
+		.mpllb_fracn_en = 1,
+		.mpllb_fracn_quot = 32768,
+		.mpllb_fracn_rem = 0,
+		.mpllb_fracn_den = 1,
+		.mpllb_ssc_up_spread = 0,
+		.mpllb_ssc_peak = 36864,
+		.mpllb_ssc_stepsize = 49545,
+		.mpllb_div_clk_en = 0,
+		.mpllb_div_multiplier = 0,
+		.mpllb_hdmi_div = 0,
+		.mpllb_tx_clk_div = 1,
+		.tx_vboost_lvl = 5,
+		.mpllb_pmix_en = 1,
+		.mpllb_word_div2_en = 0,
+		.mpllb_ana_v2i = 2,
+		.mpllb_ana_freq_vco = 3,
+		.mpllb_ana_cp_int = 9,
+		.mpllb_ana_cp_prop = 15,
+		.hdmi_pixel_clk_div = 0,
+	},
+	//HBR2
+	{
+		.hdmimode_enable = 0,
+		.ref_range = 1,
+		.ref_clk_mpllb_div = 1,
+		.mpllb_ssc_en = 1,
+		.mpllb_div5_clk_en = 1,
+		.mpllb_multiplier = 192,
+		.mpllb_fracn_en = 1,
+		.mpllb_fracn_quot = 32768,
+		.mpllb_fracn_rem = 0,
+		.mpllb_fracn_den = 1,
+		.mpllb_ssc_up_spread = 0,
+		.mpllb_ssc_peak = 36864,
+		.mpllb_ssc_stepsize = 49545,
+		.mpllb_div_clk_en = 0,
+		.mpllb_div_multiplier = 0,
+		.mpllb_hdmi_div = 0,
+		.mpllb_tx_clk_div = 0,
+		.tx_vboost_lvl = 5,
+		.mpllb_pmix_en = 1,
+		.mpllb_word_div2_en = 0,
+		.mpllb_ana_v2i = 2,
+		.mpllb_ana_freq_vco = 3,
+		.mpllb_ana_cp_int = 9,
+		.mpllb_ana_cp_prop = 15,
+		.hdmi_pixel_clk_div = 0,
+	},
+	//HBR3
+	{
+		.hdmimode_enable = 0,
+		.ref_range = 1,
+		.ref_clk_mpllb_div = 1,
+		.mpllb_ssc_en = 1,
+		.mpllb_div5_clk_en = 1,
+		.mpllb_multiplier = 304,
+		.mpllb_fracn_en = 1,
+		.mpllb_fracn_quot = 49152,
+		.mpllb_fracn_rem = 0,
+		.mpllb_fracn_den = 1,
+		.mpllb_ssc_up_spread = 0,
+		.mpllb_ssc_peak = 55296,
+		.mpllb_ssc_stepsize = 74318,
+		.mpllb_div_clk_en = 0,
+		.mpllb_div_multiplier = 0,
+		.mpllb_hdmi_div = 0,
+		.mpllb_tx_clk_div = 0,
+		.tx_vboost_lvl = 5,
+		.mpllb_pmix_en = 1,
+		.mpllb_word_div2_en = 0,
+		.mpllb_ana_v2i = 2,
+		.mpllb_ana_freq_vco = 1,
+		.mpllb_ana_cp_int = 7,
+		.mpllb_ana_cp_prop = 16,
+		.hdmi_pixel_clk_div = 0,
+	},
+};
+
+
+static bool update_cfg_data(
+		struct dcn10_link_encoder *enc10,
+		const struct dc_link_settings *link_settings,
+		struct dpcssys_phy_seq_cfg *cfg)
+{
+	int i;
+
+	cfg->load_sram_fw = false;
+	cfg->use_calibration_setting = true;
+
+	//TODO: need to implement a proper lane mapping for Renoir.
+	for (i = 0; i < 4; i++)
+		cfg->lane_en[i] = true;
+
+	switch (link_settings->link_rate) {
+	case LINK_RATE_LOW:
+		cfg->mpll_cfg = dcn21_mpll_cfg_ref[0];
+		break;
+	case LINK_RATE_HIGH:
+		cfg->mpll_cfg = dcn21_mpll_cfg_ref[1];
+		break;
+	case LINK_RATE_HIGH2:
+		cfg->mpll_cfg = dcn21_mpll_cfg_ref[2];
+		break;
+	case LINK_RATE_HIGH3:
+		cfg->mpll_cfg = dcn21_mpll_cfg_ref[3];
+		break;
+	default:
+		DC_LOG_ERROR("%s: No supported link rate found %X!\n",
+				__func__, link_settings->link_rate);
+		return false;
+	}
+
+	return true;
+}
+
+void dcn21_link_encoder_enable_dp_output(
+	struct link_encoder *enc,
+	const struct dc_link_settings *link_settings,
+	enum clock_source_id clock_source)
+{
+	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+	struct dcn21_link_encoder *enc21 = (struct dcn21_link_encoder *) enc10;
+	struct dpcssys_phy_seq_cfg *cfg = &enc21->phy_seq_cfg;
+
+	if (!enc->ctx->dc->debug.avoid_vbios_exec_table) {
+		dcn10_link_encoder_enable_dp_output(enc, link_settings, clock_source);
+		return;
+	}
+
+	if (!update_cfg_data(enc10, link_settings, cfg))
+		return;
+
+	enc1_configure_encoder(enc10, link_settings);
+
+	dcn10_link_encoder_setup(enc, SIGNAL_TYPE_DISPLAY_PORT);
+
+}
+
+void dcn21_link_encoder_disable_output(
+	struct link_encoder *enc,
+	enum signal_type signal)
+{
+	dcn10_link_encoder_disable_output(enc, signal);
+
+}
+static const struct link_encoder_funcs dcn21_link_enc_funcs = {
+#ifdef CONFIG_DRM_AMD_DC_DSC_SUPPORT
+	.read_state = link_enc2_read_state,
+#endif
+	.validate_output_with_stream =
+		dcn10_link_encoder_validate_output_with_stream,
+	.hw_init = enc2_hw_init,
+	.setup = dcn10_link_encoder_setup,
+	.enable_tmds_output = dcn10_link_encoder_enable_tmds_output,
+	.enable_dp_output = dcn21_link_encoder_enable_dp_output,
+	.enable_dp_mst_output = dcn10_link_encoder_enable_dp_mst_output,
+	.disable_output = dcn21_link_encoder_disable_output,
+	.dp_set_lane_settings = dcn10_link_encoder_dp_set_lane_settings,
+	.dp_set_phy_pattern = dcn10_link_encoder_dp_set_phy_pattern,
+	.update_mst_stream_allocation_table =
+		dcn10_link_encoder_update_mst_stream_allocation_table,
+	.psr_program_dp_dphy_fast_training =
+			dcn10_psr_program_dp_dphy_fast_training,
+	.psr_program_secondary_packet = dcn10_psr_program_secondary_packet,
+	.connect_dig_be_to_fe = dcn10_link_encoder_connect_dig_be_to_fe,
+	.enable_hpd = dcn10_link_encoder_enable_hpd,
+	.disable_hpd = dcn10_link_encoder_disable_hpd,
+	.is_dig_enabled = dcn10_is_dig_enabled,
+	.destroy = dcn10_link_encoder_destroy,
+	.fec_set_enable = enc2_fec_set_enable,
+	.fec_set_ready = enc2_fec_set_ready,
+	.fec_is_active = enc2_fec_is_active,
+	.get_dig_frontend = dcn10_get_dig_frontend,
+};
+
+void dcn21_link_encoder_construct(
+	struct dcn21_link_encoder *enc21,
+	const struct encoder_init_data *init_data,
+	const struct encoder_feature_support *enc_features,
+	const struct dcn10_link_enc_registers *link_regs,
+	const struct dcn10_link_enc_aux_registers *aux_regs,
+	const struct dcn10_link_enc_hpd_registers *hpd_regs,
+	const struct dcn10_link_enc_shift *link_shift,
+	const struct dcn10_link_enc_mask *link_mask)
+{
+	struct bp_encoder_cap_info bp_cap_info = {0};
+	const struct dc_vbios_funcs *bp_funcs = init_data->ctx->dc_bios->funcs;
+	enum bp_result result = BP_RESULT_OK;
+	struct dcn10_link_encoder *enc10 = &enc21->enc10;
+
+	enc10->base.funcs = &dcn21_link_enc_funcs;
+	enc10->base.ctx = init_data->ctx;
+	enc10->base.id = init_data->encoder;
+
+	enc10->base.hpd_source = init_data->hpd_source;
+	enc10->base.connector = init_data->connector;
+
+	enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
+
+	enc10->base.features = *enc_features;
+
+	enc10->base.transmitter = init_data->transmitter;
+
+	/* set the flag to indicate whether driver poll the I2C data pin
+	 * while doing the DP sink detect
+	 */
+
+/*	if (dal_adapter_service_is_feature_supported(as,
+		FEATURE_DP_SINK_DETECT_POLL_DATA_PIN))
+		enc10->base.features.flags.bits.
+			DP_SINK_DETECT_POLL_DATA_PIN = true;*/
+
+	enc10->base.output_signals =
+		SIGNAL_TYPE_DVI_SINGLE_LINK |
+		SIGNAL_TYPE_DVI_DUAL_LINK |
+		SIGNAL_TYPE_LVDS |
+		SIGNAL_TYPE_DISPLAY_PORT |
+		SIGNAL_TYPE_DISPLAY_PORT_MST |
+		SIGNAL_TYPE_EDP |
+		SIGNAL_TYPE_HDMI_TYPE_A;
+
+	/* For DCE 8.0 and 8.1, by design, UNIPHY is hardwired to DIG_BE.
+	 * SW always assign DIG_FE 1:1 mapped to DIG_FE for non-MST UNIPHY.
+	 * SW assign DIG_FE to non-MST UNIPHY first and MST last. So prefer
+	 * DIG is per UNIPHY and used by SST DP, eDP, HDMI, DVI and LVDS.
+	 * Prefer DIG assignment is decided by board design.
+	 * For DCE 8.0, there are only max 6 UNIPHYs, we assume board design
+	 * and VBIOS will filter out 7 UNIPHY for DCE 8.0.
+	 * By this, adding DIGG should not hurt DCE 8.0.
+	 * This will let DCE 8.1 share DCE 8.0 as much as possible
+	 */
+
+	enc10->link_regs = link_regs;
+	enc10->aux_regs = aux_regs;
+	enc10->hpd_regs = hpd_regs;
+	enc10->link_shift = link_shift;
+	enc10->link_mask = link_mask;
+
+	switch (enc10->base.transmitter) {
+	case TRANSMITTER_UNIPHY_A:
+		enc10->base.preferred_engine = ENGINE_ID_DIGA;
+	break;
+	case TRANSMITTER_UNIPHY_B:
+		enc10->base.preferred_engine = ENGINE_ID_DIGB;
+	break;
+	case TRANSMITTER_UNIPHY_C:
+		enc10->base.preferred_engine = ENGINE_ID_DIGC;
+	break;
+	case TRANSMITTER_UNIPHY_D:
+		enc10->base.preferred_engine = ENGINE_ID_DIGD;
+	break;
+	case TRANSMITTER_UNIPHY_E:
+		enc10->base.preferred_engine = ENGINE_ID_DIGE;
+	break;
+	case TRANSMITTER_UNIPHY_F:
+		enc10->base.preferred_engine = ENGINE_ID_DIGF;
+	break;
+	case TRANSMITTER_UNIPHY_G:
+		enc10->base.preferred_engine = ENGINE_ID_DIGG;
+	break;
+	default:
+		ASSERT_CRITICAL(false);
+		enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
+	}
+
+	/* default to one to mirror Windows behavior */
+	enc10->base.features.flags.bits.HDMI_6GB_EN = 1;
+
+	result = bp_funcs->get_encoder_cap_info(enc10->base.ctx->dc_bios,
+						enc10->base.id, &bp_cap_info);
+
+	/* Override features with DCE-specific values */
+	if (result == BP_RESULT_OK) {
+		enc10->base.features.flags.bits.IS_HBR2_CAPABLE =
+				bp_cap_info.DP_HBR2_EN;
+		enc10->base.features.flags.bits.IS_HBR3_CAPABLE =
+				bp_cap_info.DP_HBR3_EN;
+		enc10->base.features.flags.bits.HDMI_6GB_EN = bp_cap_info.HDMI_6GB_EN;
+		enc10->base.features.flags.bits.DP_IS_USB_C =
+				bp_cap_info.DP_IS_USB_C;
+	} else {
+		DC_LOG_WARNING("%s: Failed to get encoder_cap_info from VBIOS with error code %d!\n",
+				__func__,
+				result);
+	}
+	if (enc10->base.ctx->dc->debug.hdmi20_disable) {
+		enc10->base.features.flags.bits.HDMI_6GB_EN = 0;
+	}
+}
diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_link_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_link_encoder.h
new file mode 100644
index 000000000000..438321e547db
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_link_encoder.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2012-15 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ *  and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#ifndef __DC_LINK_ENCODER__DCN21_H__
+#define __DC_LINK_ENCODER__DCN21_H__
+
+#include "dcn20/dcn20_link_encoder.h"
+
+struct dcn21_link_encoder {
+	struct dcn10_link_encoder enc10;
+	struct dpcssys_phy_seq_cfg phy_seq_cfg;
+};
+
+void dcn21_link_encoder_enable_dp_output(
+	struct link_encoder *enc,
+	const struct dc_link_settings *link_settings,
+	enum clock_source_id clock_source);
+
+void dcn21_link_encoder_construct(
+	struct dcn21_link_encoder *enc21,
+	const struct encoder_init_data *init_data,
+	const struct encoder_feature_support *enc_features,
+	const struct dcn10_link_enc_registers *link_regs,
+	const struct dcn10_link_enc_aux_registers *aux_regs,
+	const struct dcn10_link_enc_hpd_registers *hpd_regs,
+	const struct dcn10_link_enc_shift *link_shift,
+	const struct dcn10_link_enc_mask *link_mask);
+
+#endif
diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index ac61163ab9e2..51a713bc2f05 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -44,7 +44,7 @@
 #include "dce110/dce110_hw_sequencer.h"
 #include "dcn20/dcn20_opp.h"
 #include "dcn20/dcn20_dsc.h"
-#include "dcn20/dcn20_link_encoder.h"
+#include "dcn21/dcn21_link_encoder.h"
 #include "dcn20/dcn20_stream_encoder.h"
 #include "dce/dce_clock_source.h"
 #include "dce/dce_audio.h"
@@ -1463,6 +1463,87 @@ static const struct resource_create_funcs res_create_maximus_funcs = {
 	.create_hwseq = dcn21_hwseq_create,
 };
 
+static const struct encoder_feature_support link_enc_feature = {
+		.max_hdmi_deep_color = COLOR_DEPTH_121212,
+		.max_hdmi_pixel_clock = 600000,
+		.hdmi_ycbcr420_supported = true,
+		.dp_ycbcr420_supported = true,
+		.flags.bits.IS_HBR2_CAPABLE = true,
+		.flags.bits.IS_HBR3_CAPABLE = true,
+		.flags.bits.IS_TPS3_CAPABLE = true,
+		.flags.bits.IS_TPS4_CAPABLE = true
+};
+
+
+#define link_regs(id, phyid)\
+[id] = {\
+	LE_DCN10_REG_LIST(id), \
+	UNIPHY_DCN2_REG_LIST(phyid), \
+	SRI(DP_DPHY_INTERNAL_CTRL, DP, id) \
+}
+
+static const struct dcn10_link_enc_registers link_enc_regs[] = {
+	link_regs(0, A),
+	link_regs(1, B),
+	link_regs(2, C),
+	link_regs(3, D),
+	link_regs(4, E),
+};
+
+#define aux_regs(id)\
+[id] = {\
+	DCN2_AUX_REG_LIST(id)\
+}
+
+static const struct dcn10_link_enc_aux_registers link_enc_aux_regs[] = {
+		aux_regs(0),
+		aux_regs(1),
+		aux_regs(2),
+		aux_regs(3),
+		aux_regs(4)
+};
+
+#define hpd_regs(id)\
+[id] = {\
+	HPD_REG_LIST(id)\
+}
+
+static const struct dcn10_link_enc_hpd_registers link_enc_hpd_regs[] = {
+		hpd_regs(0),
+		hpd_regs(1),
+		hpd_regs(2),
+		hpd_regs(3),
+		hpd_regs(4)
+};
+
+static const struct dcn10_link_enc_shift le_shift = {
+	LINK_ENCODER_MASK_SH_LIST_DCN20(__SHIFT)
+};
+
+static const struct dcn10_link_enc_mask le_mask = {
+	LINK_ENCODER_MASK_SH_LIST_DCN20(_MASK)
+};
+
+static struct link_encoder *dcn21_link_encoder_create(
+	const struct encoder_init_data *enc_init_data)
+{
+	struct dcn21_link_encoder *enc21 =
+		kzalloc(sizeof(struct dcn21_link_encoder), GFP_KERNEL);
+
+	if (!enc21)
+		return NULL;
+
+	dcn21_link_encoder_construct(enc21,
+				      enc_init_data,
+				      &link_enc_feature,
+				      &link_enc_regs[enc_init_data->transmitter],
+				      &link_enc_aux_regs[enc_init_data->channel - 1],
+				      &link_enc_hpd_regs[enc_init_data->hpd_source],
+				      &le_shift,
+				      &le_mask);
+
+	return &enc21->enc10.base;
+}
 #define CTX ctx
 
 #define REG(reg_name) \
@@ -1478,7 +1559,7 @@ static uint32_t read_pipe_fuses(struct dc_context *ctx)
 
 static struct resource_funcs dcn21_res_pool_funcs = {
 	.destroy = dcn21_destroy_resource_pool,
-	.link_enc_create = dcn20_link_encoder_create,
+	.link_enc_create = dcn21_link_encoder_create,
 	.validate_bandwidth = dcn21_validate_bandwidth,
 	.add_stream_to_ctx = dcn20_add_stream_to_ctx,
 	.remove_stream_from_ctx = dcn20_remove_stream_from_ctx,