drm/msm/dsi: Save/Restore PLL status across PHY reset

Reset DSI PHY silently changes its PLL registers to reset status,
which will make cached status in clock driver invalid and result
in wrong output rate of link clocks. The current restore mechanism
in DSI PLL does not cover all the cases. This change is to recover
PLL status after PHY reset to match HW status with cached status
in clock driver.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

3 files changed, 38 insertions, 36 deletions

diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c
index 509376fdd112..5104fc9f9a53 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c
@@ -72,31 +72,14 @@ long msm_dsi_pll_helper_clk_round_rate(struct clk_hw *hw,
 int msm_dsi_pll_helper_clk_prepare(struct clk_hw *hw)
 {
 	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
-	int ret;
-
-	/*
-	 * Certain PLLs need to update the same VCO rate and registers
-	 * after resume in suspend/resume scenario.
-	 */
-	if (pll->restore_state) {
-		ret = pll->restore_state(pll);
-		if (ret)
-			goto error;
-	}
 
-	ret = dsi_pll_enable(pll);
-
-error:
-	return ret;
+	return dsi_pll_enable(pll);
 }
 
 void msm_dsi_pll_helper_clk_unprepare(struct clk_hw *hw)
 {
 	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
 
-	if (pll->save_state)
-		pll->save_state(pll);
-
 	dsi_pll_disable(pll);
 }
 
@@ -134,6 +117,29 @@ void msm_dsi_pll_destroy(struct msm_dsi_pll *pll)
 		pll->destroy(pll);
 }
 
+void msm_dsi_pll_save_state(struct msm_dsi_pll *pll)
+{
+	if (pll->save_state) {
+		pll->save_state(pll);
+		pll->state_saved = true;
+	}
+}
+
+int msm_dsi_pll_restore_state(struct msm_dsi_pll *pll)
+{
+	int ret;
+
+	if (pll->restore_state && pll->state_saved) {
+		ret = pll->restore_state(pll);
+		if (ret)
+			return ret;
+
+		pll->state_saved = false;
+	}
+
+	return 0;
+}
+
 struct msm_dsi_pll *msm_dsi_pll_init(struct platform_device *pdev,
 			enum msm_dsi_phy_type type, int id)
 {
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h
index 5a3bb241c039..b69df19f1fd4 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h
@@ -27,6 +27,7 @@ struct msm_dsi_pll {
 
 	struct clk_hw	clk_hw;
 	bool		pll_on;
+	bool		state_saved;
 
 	unsigned long	min_rate;
 	unsigned long	max_rate;
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c
index eb8ac3097ff5..1912cfcca48c 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c
@@ -465,26 +465,21 @@ static int dsi_pll_28nm_restore_state(struct msm_dsi_pll *pll)
 	void __iomem *base = pll_28nm->mmio;
 	int ret;
 
-	if ((cached_state->vco_rate != 0) &&
-		(cached_state->vco_rate == __clk_get_rate(pll->clk_hw.clk))) {
-		ret = dsi_pll_28nm_clk_set_rate(&pll->clk_hw,
-						cached_state->vco_rate, 0);
-		if (ret) {
-			dev_err(&pll_28nm->pdev->dev,
-				"restore vco rate failed. ret=%d\n", ret);
-			return ret;
-		}
-
-		pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG,
-				cached_state->postdiv3);
-		pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG,
-				cached_state->postdiv1);
-		pll_write(base + REG_DSI_28nm_PHY_PLL_VREG_CFG,
-				cached_state->byte_mux);
-
-		cached_state->vco_rate = 0;
+	ret = dsi_pll_28nm_clk_set_rate(&pll->clk_hw,
+					cached_state->vco_rate, 0);
+	if (ret) {
+		dev_err(&pll_28nm->pdev->dev,
+			"restore vco rate failed. ret=%d\n", ret);
+		return ret;
 	}
 
+	pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG,
+			cached_state->postdiv3);
+	pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG,
+			cached_state->postdiv1);
+	pll_write(base + REG_DSI_28nm_PHY_PLL_VREG_CFG,
+			cached_state->byte_mux);
+
 	return 0;
 }