Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "As usual, the drivers/tee and drivers/reset subsystems get merged
  here, with the expected set of smaller updates and some new hardware
  support. The tee subsystem now supports device drivers to be attached
  to a tee, the first example here is a random number driver with its
  implementation in the secure world.

  Three new power domain drivers get added for specific chip families:
   - Broadcom BCM283x chips (used in Raspberry Pi)
   - Qualcomm Snapdragon phone chips
   - Xilinx ZynqMP FPGA SoCs

  One new driver is added to talk to the BPMP firmware on NVIDIA
  Tegra210

  Existing drivers are extended for new SoC variants from NXP, NVIDIA,
  Amlogic and Qualcomm"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits)
  tee: optee: update optee_msg.h and optee_smc.h to dual license
  tee: add cancellation support to client interface
  dpaa2-eth: configure the cache stashing amount on a queue
  soc: fsl: dpio: configure cache stashing destination
  soc: fsl: dpio: enable frame data cache stashing per software portal
  soc: fsl: guts: make fsl_guts_get_svr() static
  hwrng: make symbol 'optee_rng_id_table' static
  tee: optee: Fix unsigned comparison with less than zero
  hwrng: Fix unsigned comparison with less than zero
  tee: fix possible error pointer ctx dereferencing
  hwrng: optee: Initialize some structs using memset instead of braces
  tee: optee: Initialize some structs using memset instead of braces
  soc: fsl: dpio: fix memory leak of a struct qbman on error exit path
  clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static
  soc: qcom: llcc-slice: Fix typos
  qcom: soc: llcc-slice: Consolidate some code
  qcom: soc: llcc-slice: Clear the global drv_data pointer on error
  drivers: soc: xilinx: Add ZynqMP power domain driver
  firmware: xilinx: Add APIs to control node status/power
  dt-bindings: power: Add ZynqMP power domain bindings
  ...

7 files changed, 913 insertions, 98 deletions

diff --git a/drivers/clk/tegra/Kconfig b/drivers/clk/tegra/Kconfig
index 7ddacae5d0b1..1adcccfa7829 100644
--- a/drivers/clk/tegra/Kconfig
+++ b/drivers/clk/tegra/Kconfig
@@ -5,3 +5,8 @@ config TEGRA_CLK_EMC
 config CLK_TEGRA_BPMP
 	def_bool y
 	depends on TEGRA_BPMP
+
+config TEGRA_CLK_DFLL
+	depends on ARCH_TEGRA_124_SOC || ARCH_TEGRA_210_SOC
+	select PM_OPP
+	def_bool y
diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile
index 6507acc843c7..4812e45c2214 100644
--- a/drivers/clk/tegra/Makefile
+++ b/drivers/clk/tegra/Makefile
@@ -20,7 +20,7 @@ obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += clk-tegra20.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)         += clk-tegra30.o
 obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= clk-tegra114.o
 obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= clk-tegra124.o
-obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= clk-tegra124-dfll-fcpu.o
+obj-$(CONFIG_TEGRA_CLK_DFLL)		+= clk-tegra124-dfll-fcpu.o
 obj-$(CONFIG_ARCH_TEGRA_132_SOC)	+= clk-tegra124.o
 obj-y					+= cvb.o
 obj-$(CONFIG_ARCH_TEGRA_210_SOC)	+= clk-tegra210.o
diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c
index 609e363dabf8..0400e5b1d627 100644
--- a/drivers/clk/tegra/clk-dfll.c
+++ b/drivers/clk/tegra/clk-dfll.c
@@ -1,7 +1,7 @@
 /*
  * clk-dfll.c - Tegra DFLL clock source common code
  *
- * Copyright (C) 2012-2014 NVIDIA Corporation. All rights reserved.
+ * Copyright (C) 2012-2019 NVIDIA Corporation. All rights reserved.
  *
  * Aleksandr Frid <afrid@nvidia.com>
  * Paul Walmsley <pwalmsley@nvidia.com>
@@ -47,6 +47,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/pm_opp.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
@@ -243,6 +244,12 @@ enum dfll_tune_range {
 	DFLL_TUNE_LOW = 1,
 };
 
+
+enum tegra_dfll_pmu_if {
+	TEGRA_DFLL_PMU_I2C = 0,
+	TEGRA_DFLL_PMU_PWM = 1,
+};
+
 /**
  * struct dfll_rate_req - target DFLL rate request data
  * @rate: target frequency, after the postscaling
@@ -300,10 +307,19 @@ struct tegra_dfll {
 	u32				i2c_reg;
 	u32				i2c_slave_addr;
 
-	/* i2c_lut array entries are regulator framework selectors */
-	unsigned			i2c_lut[MAX_DFLL_VOLTAGES];
-	int				i2c_lut_size;
-	u8				lut_min, lut_max, lut_safe;
+	/* lut array entries are regulator framework selectors or PWM values*/
+	unsigned			lut[MAX_DFLL_VOLTAGES];
+	unsigned long			lut_uv[MAX_DFLL_VOLTAGES];
+	int				lut_size;
+	u8				lut_bottom, lut_min, lut_max, lut_safe;
+
+	/* PWM interface */
+	enum tegra_dfll_pmu_if		pmu_if;
+	unsigned long			pwm_rate;
+	struct pinctrl			*pwm_pin;
+	struct pinctrl_state		*pwm_enable_state;
+	struct pinctrl_state		*pwm_disable_state;
+	u32				reg_init_uV;
 };
 
 #define clk_hw_to_dfll(_hw) container_of(_hw, struct tegra_dfll, dfll_clk_hw)
@@ -490,6 +506,34 @@ static void dfll_set_mode(struct tegra_dfll *td,
 }
 
 /*
+ * DVCO rate control
+ */
+
+static unsigned long get_dvco_rate_below(struct tegra_dfll *td, u8 out_min)
+{
+	struct dev_pm_opp *opp;
+	unsigned long rate, prev_rate;
+	unsigned long uv, min_uv;
+
+	min_uv = td->lut_uv[out_min];
+	for (rate = 0, prev_rate = 0; ; rate++) {
+		opp = dev_pm_opp_find_freq_ceil(td->soc->dev, &rate);
+		if (IS_ERR(opp))
+			break;
+
+		uv = dev_pm_opp_get_voltage(opp);
+		dev_pm_opp_put(opp);
+
+		if (uv && uv > min_uv)
+			return prev_rate;
+
+		prev_rate = rate;
+	}
+
+	return prev_rate;
+}
+
+/*
  * DFLL-to-I2C controller interface
  */
 
@@ -518,6 +562,118 @@ static int dfll_i2c_set_output_enabled(struct tegra_dfll *td, bool enable)
 	return 0;
 }
 
+
+/*
+ * DFLL-to-PWM controller interface
+ */
+
+/**
+ * dfll_pwm_set_output_enabled - enable/disable PWM voltage requests
+ * @td: DFLL instance
+ * @enable: whether to enable or disable the PWM voltage requests
+ *
+ * Set the master enable control for PWM control value updates. If disabled,
+ * then the PWM signal is not driven. Also configure the PWM output pad
+ * to the appropriate state.
+ */
+static int dfll_pwm_set_output_enabled(struct tegra_dfll *td, bool enable)
+{
+	int ret;
+	u32 val, div;
+
+	if (enable) {
+		ret = pinctrl_select_state(td->pwm_pin, td->pwm_enable_state);
+		if (ret < 0) {
+			dev_err(td->dev, "setting enable state failed\n");
+			return -EINVAL;
+		}
+		val = dfll_readl(td, DFLL_OUTPUT_CFG);
+		val &= ~DFLL_OUTPUT_CFG_PWM_DIV_MASK;
+		div = DIV_ROUND_UP(td->ref_rate, td->pwm_rate);
+		val |= (div << DFLL_OUTPUT_CFG_PWM_DIV_SHIFT)
+				& DFLL_OUTPUT_CFG_PWM_DIV_MASK;
+		dfll_writel(td, val, DFLL_OUTPUT_CFG);
+		dfll_wmb(td);
+
+		val |= DFLL_OUTPUT_CFG_PWM_ENABLE;
+		dfll_writel(td, val, DFLL_OUTPUT_CFG);
+		dfll_wmb(td);
+	} else {
+		ret = pinctrl_select_state(td->pwm_pin, td->pwm_disable_state);
+		if (ret < 0)
+			dev_warn(td->dev, "setting disable state failed\n");
+
+		val = dfll_readl(td, DFLL_OUTPUT_CFG);
+		val &= ~DFLL_OUTPUT_CFG_PWM_ENABLE;
+		dfll_writel(td, val, DFLL_OUTPUT_CFG);
+		dfll_wmb(td);
+	}
+
+	return 0;
+}
+
+/**
+ * dfll_set_force_output_value - set fixed value for force output
+ * @td: DFLL instance
+ * @out_val: value to force output
+ *
+ * Set the fixed value for force output, DFLL will output this value when
+ * force output is enabled.
+ */
+static u32 dfll_set_force_output_value(struct tegra_dfll *td, u8 out_val)
+{
+	u32 val = dfll_readl(td, DFLL_OUTPUT_FORCE);
+
+	val = (val & DFLL_OUTPUT_FORCE_ENABLE) | (out_val & OUT_MASK);
+	dfll_writel(td, val, DFLL_OUTPUT_FORCE);
+	dfll_wmb(td);
+
+	return dfll_readl(td, DFLL_OUTPUT_FORCE);
+}
+
+/**
+ * dfll_set_force_output_enabled - enable/disable force output
+ * @td: DFLL instance
+ * @enable: whether to enable or disable the force output
+ *
+ * Set the enable control for fouce output with fixed value.
+ */
+static void dfll_set_force_output_enabled(struct tegra_dfll *td, bool enable)
+{
+	u32 val = dfll_readl(td, DFLL_OUTPUT_FORCE);
+
+	if (enable)
+		val |= DFLL_OUTPUT_FORCE_ENABLE;
+	else
+		val &= ~DFLL_OUTPUT_FORCE_ENABLE;
+
+	dfll_writel(td, val, DFLL_OUTPUT_FORCE);
+	dfll_wmb(td);
+}
+
+/**
+ * dfll_force_output - force output a fixed value
+ * @td: DFLL instance
+ * @out_sel: value to force output
+ *
+ * Set the fixed value for force output, DFLL will output this value.
+ */
+static int dfll_force_output(struct tegra_dfll *td, unsigned int out_sel)
+{
+	u32 val;
+
+	if (out_sel > OUT_MASK)
+		return -EINVAL;
+
+	val = dfll_set_force_output_value(td, out_sel);
+	if ((td->mode < DFLL_CLOSED_LOOP) &&
+	    !(val & DFLL_OUTPUT_FORCE_ENABLE)) {
+		dfll_set_force_output_enabled(td, true);
+	}
+
+	return 0;
+}
+
 /**
  * dfll_load_lut - load the voltage lookup table
  * @td: struct tegra_dfll *
@@ -539,7 +695,7 @@ static void dfll_load_i2c_lut(struct tegra_dfll *td)
 			lut_index = i;
 
 		val = regulator_list_hardware_vsel(td->vdd_reg,
-						     td->i2c_lut[lut_index]);
+						     td->lut[lut_index]);
 		__raw_writel(val, td->lut_base + i * 4);
 	}
 
@@ -594,24 +750,41 @@ static void dfll_init_out_if(struct tegra_dfll *td)
 {
 	u32 val;
 
-	td->lut_min = 0;
-	td->lut_max = td->i2c_lut_size - 1;
-	td->lut_safe = td->lut_min + 1;
+	td->lut_min = td->lut_bottom;
+	td->lut_max = td->lut_size - 1;
+	td->lut_safe = td->lut_min + (td->lut_min < td->lut_max ? 1 : 0);
+
+	/* clear DFLL_OUTPUT_CFG before setting new value */
+	dfll_writel(td, 0, DFLL_OUTPUT_CFG);
+	dfll_wmb(td);
 
-	dfll_i2c_writel(td, 0, DFLL_OUTPUT_CFG);
 	val = (td->lut_safe << DFLL_OUTPUT_CFG_SAFE_SHIFT) |
-		(td->lut_max << DFLL_OUTPUT_CFG_MAX_SHIFT) |
-		(td->lut_min << DFLL_OUTPUT_CFG_MIN_SHIFT);
-	dfll_i2c_writel(td, val, DFLL_OUTPUT_CFG);
-	dfll_i2c_wmb(td);
+	      (td->lut_max << DFLL_OUTPUT_CFG_MAX_SHIFT) |
+	      (td->lut_min << DFLL_OUTPUT_CFG_MIN_SHIFT);
+	dfll_writel(td, val, DFLL_OUTPUT_CFG);
+	dfll_wmb(td);
 
 	dfll_writel(td, 0, DFLL_OUTPUT_FORCE);
 	dfll_i2c_writel(td, 0, DFLL_INTR_EN);
 	dfll_i2c_writel(td, DFLL_INTR_MAX_MASK | DFLL_INTR_MIN_MASK,
 			DFLL_INTR_STS);
 
-	dfll_load_i2c_lut(td);
-	dfll_init_i2c_if(td);
+	if (td->pmu_if == TEGRA_DFLL_PMU_PWM) {
+		u32 vinit = td->reg_init_uV;
+		int vstep = td->soc->alignment.step_uv;
+		unsigned long vmin = td->lut_uv[0];
+
+		/* set initial voltage */
+		if ((vinit >= vmin) && vstep) {
+			unsigned int vsel;
+
+			vsel = DIV_ROUND_UP((vinit - vmin), vstep);
+			dfll_force_output(td, vsel);
+		}
+	} else {
+		dfll_load_i2c_lut(td);
+		dfll_init_i2c_if(td);
+	}
 }
 
 /*
@@ -631,17 +804,17 @@ static void dfll_init_out_if(struct tegra_dfll *td)
 static int find_lut_index_for_rate(struct tegra_dfll *td, unsigned long rate)
 {
 	struct dev_pm_opp *opp;
-	int i, uv;
+	int i, align_step;
 
 	opp = dev_pm_opp_find_freq_ceil(td->soc->dev, &rate);
 	if (IS_ERR(opp))
 		return PTR_ERR(opp);
 
-	uv = dev_pm_opp_get_voltage(opp);
+	align_step = dev_pm_opp_get_voltage(opp) / td->soc->alignment.step_uv;
 	dev_pm_opp_put(opp);
 
-	for (i = 0; i < td->i2c_lut_size; i++) {
-		if (regulator_list_voltage(td->vdd_reg, td->i2c_lut[i]) == uv)
+	for (i = td->lut_bottom; i < td->lut_size; i++) {
+		if ((td->lut_uv[i] / td->soc->alignment.step_uv) >= align_step)
 			return i;
 	}
 
@@ -863,9 +1036,14 @@ static int dfll_lock(struct tegra_dfll *td)
 			return -EINVAL;
 		}
 
-		dfll_i2c_set_output_enabled(td, true);
+		if (td->pmu_if == TEGRA_DFLL_PMU_PWM)
+			dfll_pwm_set_output_enabled(td, true);
+		else
+			dfll_i2c_set_output_enabled(td, true);
+
 		dfll_set_mode(td, DFLL_CLOSED_LOOP);
 		dfll_set_frequency_request(td, req);
+		dfll_set_force_output_enabled(td, false);
 		return 0;
 
 	default:
@@ -889,7 +1067,10 @@ static int dfll_unlock(struct tegra_dfll *td)
 	case DFLL_CLOSED_LOOP:
 		dfll_set_open_loop_config(td);
 		dfll_set_mode(td, DFLL_OPEN_LOOP);
-		dfll_i2c_set_output_enabled(td, false);
+		if (td->pmu_if == TEGRA_DFLL_PMU_PWM)
+			dfll_pwm_set_output_enabled(td, false);
+		else
+			dfll_i2c_set_output_enabled(td, false);
 		return 0;
 
 	case DFLL_OPEN_LOOP:
@@ -1171,15 +1352,17 @@ static int attr_registers_show(struct seq_file *s, void *data)
 		seq_printf(s, "[0x%02x] = 0x%08x\n", offs,
 			   dfll_i2c_readl(td, offs));
 
-	seq_puts(s, "\nINTEGRATED I2C CONTROLLER REGISTERS:\n");
-	offs = DFLL_I2C_CLK_DIVISOR;
-	seq_printf(s, "[0x%02x] = 0x%08x\n", offs,
-		   __raw_readl(td->i2c_controller_base + offs));
-
-	seq_puts(s, "\nLUT:\n");
-	for (offs = 0; offs <  4 * MAX_DFLL_VOLTAGES; offs += 4)
+	if (td->pmu_if == TEGRA_DFLL_PMU_I2C) {
+		seq_puts(s, "\nINTEGRATED I2C CONTROLLER REGISTERS:\n");
+		offs = DFLL_I2C_CLK_DIVISOR;
 		seq_printf(s, "[0x%02x] = 0x%08x\n", offs,
-			   __raw_readl(td->lut_base + offs));
+			   __raw_readl(td->i2c_controller_base + offs));
+
+		seq_puts(s, "\nLUT:\n");
+		for (offs = 0; offs <  4 * MAX_DFLL_VOLTAGES; offs += 4)
+			seq_printf(s, "[0x%02x] = 0x%08x\n", offs,
+				   __raw_readl(td->lut_base + offs));
+	}
 
 	return 0;
 }
@@ -1349,15 +1532,21 @@ di_err1:
  */
 static int find_vdd_map_entry_exact(struct tegra_dfll *td, int uV)
 {
-	int i, n_voltages, reg_uV;
+	int i, n_voltages, reg_uV,reg_volt_id, align_step;
+
+	if (WARN_ON(td->pmu_if == TEGRA_DFLL_PMU_PWM))
+		return -EINVAL;
 
+	align_step = uV / td->soc->alignment.step_uv;
 	n_voltages = regulator_count_voltages(td->vdd_reg);
 	for (i = 0; i < n_voltages; i++) {
 		reg_uV = regulator_list_voltage(td->vdd_reg, i);
 		if (reg_uV < 0)
 			break;
 
-		if (uV == reg_uV)
+		reg_volt_id = reg_uV / td->soc->alignment.step_uv;
+
+		if (align_step == reg_volt_id)
 			return i;
 	}
 
@@ -1371,15 +1560,21 @@ static int find_vdd_map_entry_exact(struct tegra_dfll *td, int uV)
  * */
 static int find_vdd_map_entry_min(struct tegra_dfll *td, int uV)
 {
-	int i, n_voltages, reg_uV;
+	int i, n_voltages, reg_uV, reg_volt_id, align_step;
 
+	if (WARN_ON(td->pmu_if == TEGRA_DFLL_PMU_PWM))
+		return -EINVAL;
+
+	align_step = uV / td->soc->alignment.step_uv;
 	n_voltages = regulator_count_voltages(td->vdd_reg);
 	for (i = 0; i < n_voltages; i++) {
 		reg_uV = regulator_list_voltage(td->vdd_reg, i);
 		if (reg_uV < 0)
 			break;
 
-		if (uV <= reg_uV)
+		reg_volt_id = reg_uV / td->soc->alignment.step_uv;
+
+		if (align_step <= reg_volt_id)
 			return i;
 	}
 
@@ -1387,9 +1582,61 @@ static int find_vdd_map_entry_min(struct tegra_dfll *td, int uV)
 	return -EINVAL;
 }
 
+/*
+ * dfll_build_pwm_lut - build the PWM regulator lookup table
+ * @td: DFLL instance
+ * @v_max: Vmax from OPP table
+ *
+ * Look-up table in h/w is ignored when PWM is used as DFLL interface to PMIC.
+ * In this case closed loop output is controlling duty cycle directly. The s/w
+ * look-up that maps PWM duty cycle to voltage is still built by this function.
+ */
+static int dfll_build_pwm_lut(struct tegra_dfll *td, unsigned long v_max)
+{
+	int i;
+	unsigned long rate, reg_volt;
+	u8 lut_bottom = MAX_DFLL_VOLTAGES;
+	int v_min = td->soc->cvb->min_millivolts * 1000;
+
+	for (i = 0; i < MAX_DFLL_VOLTAGES; i++) {
+		reg_volt = td->lut_uv[i];
+
+		/* since opp voltage is exact mv */
+		reg_volt = (reg_volt / 1000) * 1000;
+		if (reg_volt > v_max)
+			break;
+
+		td->lut[i] = i;
+		if ((lut_bottom == MAX_DFLL_VOLTAGES) && (reg_volt >= v_min))
+			lut_bottom = i;
+	}
+
+	/* determine voltage boundaries */
+	td->lut_size = i;
+	if ((lut_bottom == MAX_DFLL_VOLTAGES) ||
+	    (lut_bottom + 1 >= td->lut_size)) {
+		dev_err(td->dev, "no voltage above DFLL minimum %d mV\n",
+			td->soc->cvb->min_millivolts);
+		return -EINVAL;
+	}
+	td->lut_bottom = lut_bottom;
+
+	/* determine rate boundaries */
+	rate = get_dvco_rate_below(td, td->lut_bottom);
+	if (!rate) {
+		dev_err(td->dev, "no opp below DFLL minimum voltage %d mV\n",
+			td->soc->cvb->min_millivolts);
+		return -EINVAL;
+	}
+	td->dvco_rate_min = rate;
+
+	return 0;
+}
+
 /**
  * dfll_build_i2c_lut - build the I2C voltage register lookup table
  * @td: DFLL instance
+ * @v_max: Vmax from OPP table
  *
  * The DFLL hardware has 33 bytes of look-up table RAM that must be filled with
  * PMIC voltage register values that span the entire DFLL operating range.
@@ -1397,33 +1644,24 @@ static int find_vdd_map_entry_min(struct tegra_dfll *td, int uV)
  * the soc-specific platform driver (td->soc->opp_dev) and the PMIC
  * register-to-voltage mapping queried from the regulator framework.
  *
- * On success, fills in td->i2c_lut and returns 0, or -err on failure.
+ * On success, fills in td->lut and returns 0, or -err on failure.
  */
-static int dfll_build_i2c_lut(struct tegra_dfll *td)
+static int dfll_build_i2c_lut(struct tegra_dfll *td, unsigned long v_max)
 {
+	unsigned long rate, v, v_opp;
 	int ret = -EINVAL;
-	int j, v, v_max, v_opp;
-	int selector;
-	unsigned long rate;
-	struct dev_pm_opp *opp;
-	int lut;
-
-	rate = ULONG_MAX;
-	opp = dev_pm_opp_find_freq_floor(td->soc->dev, &rate);
-	if (IS_ERR(opp)) {
-		dev_err(td->dev, "couldn't get vmax opp, empty opp table?\n");
-		goto out;
-	}
-	v_max = dev_pm_opp_get_voltage(opp);
-	dev_pm_opp_put(opp);
+	int j, selector, lut;
 
 	v = td->soc->cvb->min_millivolts * 1000;
 	lut = find_vdd_map_entry_exact(td, v);
 	if (lut < 0)
 		goto out;
-	td->i2c_lut[0] = lut;
+	td->lut[0] = lut;
+	td->lut_bottom = 0;
 
 	for (j = 1, rate = 0; ; rate++) {
+		struct dev_pm_opp *opp;
+
 		opp = dev_pm_opp_find_freq_ceil(td->soc->dev, &rate);
 		if (IS_ERR(opp))
 			break;
@@ -1435,39 +1673,64 @@ static int dfll_build_i2c_lut(struct tegra_dfll *td)
 		dev_pm_opp_put(opp);
 
 		for (;;) {
-			v += max(1, (v_max - v) / (MAX_DFLL_VOLTAGES - j));
+			v += max(1UL, (v_max - v) / (MAX_DFLL_VOLTAGES - j));
 			if (v >= v_opp)
 				break;
 
 			selector = find_vdd_map_entry_min(td, v);
 			if (selector < 0)
 				goto out;
-			if (selector != td->i2c_lut[j - 1])
-				td->i2c_lut[j++] = selector;
+			if (selector != td->lut[j - 1])
+				td->lut[j++] = selector;
 		}
 
 		v = (j == MAX_DFLL_VOLTAGES - 1) ? v_max : v_opp;
 		selector = find_vdd_map_entry_exact(td, v);
 		if (selector < 0)
 			goto out;
-		if (selector != td->i2c_lut[j - 1])
-			td->i2c_lut[j++] = selector;
+		if (selector != td->lut[j - 1])
+			td->lut[j++] = selector;
 
 		if (v >= v_max)
 			break;
 	}
-	td->i2c_lut_size = j;
+	td->lut_size = j;
 
 	if (!td->dvco_rate_min)
 		dev_err(td->dev, "no opp above DFLL minimum voltage %d mV\n",
 			td->soc->cvb->min_millivolts);
-	else
+	else {
 		ret = 0;
+		for (j = 0; j < td->lut_size; j++)
+			td->lut_uv[j] =
+				regulator_list_voltage(td->vdd_reg,
+						       td->lut[j]);
+	}
 
 out:
 	return ret;
 }
 
+static int dfll_build_lut(struct tegra_dfll *td)
+{
+	unsigned long rate, v_max;
+	struct dev_pm_opp *opp;
+
+	rate = ULONG_MAX;
+	opp = dev_pm_opp_find_freq_floor(td->soc->dev, &rate);
+	if (IS_ERR(opp)) {
+		dev_err(td->dev, "couldn't get vmax opp, empty opp table?\n");
+		return -EINVAL;
+	}
+	v_max = dev_pm_opp_get_voltage(opp);
+	dev_pm_opp_put(opp);
+
+	if (td->pmu_if == TEGRA_DFLL_PMU_PWM)
+		return dfll_build_pwm_lut(td, v_max);
+	else
+		return dfll_build_i2c_lut(td, v_max);
+}
+
 /**
  * read_dt_param - helper function for reading required parameters from the DT
  * @td: DFLL instance
@@ -1526,11 +1789,56 @@ static int dfll_fetch_i2c_params(struct tegra_dfll *td)
 	}
 	td->i2c_reg = vsel_reg;
 
-	ret = dfll_build_i2c_lut(td);
-	if (ret) {
-		dev_err(td->dev, "couldn't build I2C LUT\n");
+	return 0;
+}
+
+static int dfll_fetch_pwm_params(struct tegra_dfll *td)
+{
+	int ret, i;
+	u32 pwm_period;
+
+	if (!td->soc->alignment.step_uv || !td->soc->alignment.offset_uv) {
+		dev_err(td->dev,
+			"Missing step or alignment info for PWM regulator");
+		return -EINVAL;
+	}
+	for (i = 0; i < MAX_DFLL_VOLTAGES; i++)
+		td->lut_uv[i] = td->soc->alignment.offset_uv +
+				i * td->soc->alignment.step_uv;
+
+	ret = read_dt_param(td, "nvidia,pwm-tristate-microvolts",
+			    &td->reg_init_uV);
+	if (!ret) {
+		dev_err(td->dev, "couldn't get initialized voltage\n");
+		return ret;
+	}
+
+	ret = read_dt_param(td, "nvidia,pwm-period-nanoseconds", &pwm_period);
+	if (!ret) {
+		dev_err(td->dev, "couldn't get PWM period\n");
 		return ret;
 	}
+	td->pwm_rate = (NSEC_PER_SEC / pwm_period) * (MAX_DFLL_VOLTAGES - 1);
+
+	td->pwm_pin = devm_pinctrl_get(td->dev);
+	if (IS_ERR(td->pwm_pin)) {
+		dev_err(td->dev, "DT: missing pinctrl device\n");
+		return PTR_ERR(td->pwm_pin);
+	}
+
+	td->pwm_enable_state = pinctrl_lookup_state(td->pwm_pin,
+						    "dvfs_pwm_enable");
+	if (IS_ERR(td->pwm_enable_state)) {
+		dev_err(td->dev, "DT: missing pwm enabled state\n");
+		return PTR_ERR(td->pwm_enable_state);
+	}
+
+	td->pwm_disable_state = pinctrl_lookup_state(td->pwm_pin,
+						     "dvfs_pwm_disable");
+	if (IS_ERR(td->pwm_disable_state)) {
+		dev_err(td->dev, "DT: missing pwm disabled state\n");
+		return PTR_ERR(td->pwm_disable_state);
+	}
 
 	return 0;
 }
@@ -1597,16 +1905,6 @@ int tegra_dfll_register(struct platform_device *pdev,
 
 	td->soc = soc;
 
-	td->vdd_reg = devm_regulator_get(td->dev, "vdd-cpu");
-	if (IS_ERR(td->vdd_reg)) {
-		ret = PTR_ERR(td->vdd_reg);
-		if (ret != -EPROBE_DEFER)
-			dev_err(td->dev, "couldn't get vdd_cpu regulator: %d\n",
-				ret);
-
-		return ret;
-	}
-
 	td->dvco_rst = devm_reset_control_get(td->dev, "dvco");
 	if (IS_ERR(td->dvco_rst)) {
 		dev_err(td->dev, "couldn't get dvco reset\n");
@@ -1619,10 +1917,27 @@ int tegra_dfll_register(struct platform_device *pdev,
 		return ret;
 	}
 
-	ret = dfll_fetch_i2c_params(td);
+	if (of_property_read_bool(td->dev->of_node, "nvidia,pwm-to-pmic")) {
+		td->pmu_if = TEGRA_DFLL_PMU_PWM;
+		ret = dfll_fetch_pwm_params(td);
+	} else  {
+		td->vdd_reg = devm_regulator_get(td->dev, "vdd-cpu");
+		if (IS_ERR(td->vdd_reg)) {
+			dev_err(td->dev, "couldn't get vdd_cpu regulator\n");
+			return PTR_ERR(td->vdd_reg);
+		}
+		td->pmu_if = TEGRA_DFLL_PMU_I2C;
+		ret = dfll_fetch_i2c_params(td);
+	}
 	if (ret)
 		return ret;
 
+	ret = dfll_build_lut(td);
+	if (ret) {
+		dev_err(td->dev, "couldn't build LUT\n");
+		return ret;
+	}
+
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!mem) {
 		dev_err(td->dev, "no control register resource\n");
diff --git a/drivers/clk/tegra/clk-dfll.h b/drivers/clk/tegra/clk-dfll.h
index 83352c8078f2..85d0d95223f3 100644
--- a/drivers/clk/tegra/clk-dfll.h
+++ b/drivers/clk/tegra/clk-dfll.h
@@ -1,6 +1,6 @@
 /*
  * clk-dfll.h - prototypes and macros for the Tegra DFLL clocksource driver
- * Copyright (C) 2013 NVIDIA Corporation.  All rights reserved.
+ * Copyright (C) 2013-2019 NVIDIA Corporation.  All rights reserved.
  *
  * Aleksandr Frid <afrid@nvidia.com>
  * Paul Walmsley <pwalmsley@nvidia.com>
@@ -22,11 +22,14 @@
 #include <linux/reset.h>
 #include <linux/types.h>
 
+#include "cvb.h"
+
 /**
  * struct tegra_dfll_soc_data - SoC-specific hooks/integration for the DFLL driver
  * @dev: struct device * that holds the OPP table for the DFLL
  * @max_freq: maximum frequency supported on this SoC
  * @cvb: CPU frequency table for this SoC
+ * @alignment: parameters of the regulator step and offset
  * @init_clock_trimmers: callback to initialize clock trimmers
  * @set_clock_trimmers_high: callback to tune clock trimmers for high voltage
  * @set_clock_trimmers_low: callback to tune clock trimmers for low voltage
@@ -35,6 +38,7 @@ struct tegra_dfll_soc_data {
 	struct device *dev;
 	unsigned long max_freq;
 	const struct cvb_table *cvb;
+	struct rail_alignment alignment;
 
 	void (*init_clock_trimmers)(void);
 	void (*set_clock_trimmers_high)(void);
diff --git a/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c b/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
index edc31bb56674..e8ec42bf8638 100644
--- a/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
+++ b/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
@@ -1,7 +1,7 @@
 /*
  * Tegra124 DFLL FCPU clock source driver
  *
- * Copyright (C) 2012-2014 NVIDIA Corporation.  All rights reserved.
+ * Copyright (C) 2012-2019 NVIDIA Corporation.  All rights reserved.
  *
  * Aleksandr Frid <afrid@nvidia.com>
  * Paul Walmsley <pwalmsley@nvidia.com>
@@ -21,15 +21,24 @@
 #include <linux/err.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <soc/tegra/fuse.h>
 
 #include "clk.h"
 #include "clk-dfll.h"
 #include "cvb.h"
 
+struct dfll_fcpu_data {
+	const unsigned long *cpu_max_freq_table;
+	unsigned int cpu_max_freq_table_size;
+	const struct cvb_table *cpu_cvb_tables;
+	unsigned int cpu_cvb_tables_size;
+};
+
 /* Maximum CPU frequency, indexed by CPU speedo id */
-static const unsigned long cpu_max_freq_table[] = {
+static const unsigned long tegra124_cpu_max_freq_table[] = {
 	[0] = 2014500000UL,
 	[1] = 2320500000UL,
 	[2] = 2116500000UL,
@@ -42,9 +51,6 @@ static const struct cvb_table tegra124_cpu_cvb_tables[] = {
 		.process_id = -1,
 		.min_millivolts = 900,
 		.max_millivolts = 1260,
-		.alignment = {
-			.step_uv = 10000, /* 10mV */
-		},
 		.speedo_scale = 100,
 		.voltage_scale = 1000,
 		.entries = {
@@ -82,16 +88,493 @@ static const struct cvb_table tegra124_cpu_cvb_tables[] = {
 	},
 };
 
+static const unsigned long tegra210_cpu_max_freq_table[] = {
+	[0] = 1912500000UL,
+	[1] = 1912500000UL,
+	[2] = 2218500000UL,
+	[3] = 1785000000UL,
+	[4] = 1632000000UL,
+	[5] = 1912500000UL,
+	[6] = 2014500000UL,
+	[7] = 1734000000UL,
+	[8] = 1683000000UL,
+	[9] = 1555500000UL,
+	[10] = 1504500000UL,
+};
+
+#define CPU_CVB_TABLE \
+	.speedo_scale = 100,	\
+	.voltage_scale = 1000,	\
+	.entries = {		\
+		{  204000000UL,	{ 1007452, -23865, 370 } }, \
+		{  306000000UL,	{ 1052709, -24875, 370 } }, \
+		{  408000000UL,	{ 1099069, -25895, 370 } }, \
+		{  510000000UL,	{ 1146534, -26905, 370 } }, \
+		{  612000000UL,	{ 1195102, -27915, 370 } }, \
+		{  714000000UL,	{ 1244773, -28925, 370 } }, \
+		{  816000000UL,	{ 1295549, -29935, 370 } }, \
+		{  918000000UL,	{ 1347428, -30955, 370 } }, \
+		{ 1020000000UL,	{ 1400411, -31965, 370 } }, \
+		{ 1122000000UL,	{ 1454497, -32975, 370 } }, \
+		{ 1224000000UL,	{ 1509687, -33985, 370 } }, \
+		{ 1326000000UL,	{ 1565981, -35005, 370 } }, \
+		{ 1428000000UL,	{ 1623379, -36015, 370 } }, \
+		{ 1530000000UL,	{ 1681880, -37025, 370 } }, \
+		{ 1632000000UL,	{ 1741485, -38035, 370 } }, \
+		{ 1734000000UL,	{ 1802194, -39055, 370 } }, \
+		{ 1836000000UL,	{ 1864006, -40065, 370 } }, \
+		{ 1912500000UL,	{ 1910780, -40815, 370 } }, \
+		{ 2014500000UL,	{ 1227000,      0,   0 } }, \
+		{ 2218500000UL,	{ 1227000,      0,   0 } }, \
+		{          0UL,	{       0,      0,   0 } }, \
+	}
+
+#define CPU_CVB_TABLE_XA \
+	.speedo_scale = 100,	\
+	.voltage_scale = 1000,	\
+	.entries = {		\
+		{  204000000UL,	{ 1250024, -39785, 565 } }, \
+		{  306000000UL,	{ 1297556, -41145, 565 } }, \
+		{  408000000UL,	{ 1346718, -42505, 565 } }, \
+		{  510000000UL,	{ 1397511, -43855, 565 } }, \
+		{  612000000UL,	{ 1449933, -45215, 565 } }, \
+		{  714000000UL,	{ 1503986, -46575, 565 } }, \
+		{  816000000UL,	{ 1559669, -47935, 565 } }, \
+		{  918000000UL,	{ 1616982, -49295, 565 } }, \
+		{ 1020000000UL,	{ 1675926, -50645, 565 } }, \
+		{ 1122000000UL,	{ 1736500, -52005, 565 } }, \
+		{ 1224000000UL,	{ 1798704, -53365, 565 } }, \
+		{ 1326000000UL,	{ 1862538, -54725, 565 } }, \
+		{ 1428000000UL,	{ 1928003, -56085, 565 } }, \
+		{ 1530000000UL,	{ 1995097, -57435, 565 } }, \
+		{ 1606500000UL,	{ 2046149, -58445, 565 } }, \
+		{ 1632000000UL,	{ 2063822, -58795, 565 } }, \
+		{          0UL,	{       0,      0,   0 } }, \
+	}
+
+#define CPU_CVB_TABLE_EUCM1 \
+	.speedo_scale = 100,	\
+	.voltage_scale = 1000,	\
+	.entries = {		\
+		{  204000000UL,	{  734429, 0, 0 } }, \
+		{  306000000UL,	{  768191, 0, 0 } }, \
+		{  408000000UL,	{  801953, 0, 0 } }, \
+		{  510000000UL,	{  835715, 0, 0 } }, \
+		{  612000000UL,	{  869477, 0, 0 } }, \
+		{  714000000UL,	{  903239, 0, 0 } }, \
+		{  816000000UL,	{  937001, 0, 0 } }, \
+		{  918000000UL,	{  970763, 0, 0 } }, \
+		{ 1020000000UL,	{ 1004525, 0, 0 } }, \
+		{ 1122000000UL,	{ 1038287, 0, 0 } }, \
+		{ 1224000000UL,	{ 1072049, 0, 0 } }, \
+		{ 1326000000UL,	{ 1105811, 0, 0 } }, \
+		{ 1428000000UL,	{ 1130000, 0, 0 } }, \
+		{ 1555500000UL,	{ 1130000, 0, 0 } }, \
+		{ 1632000000UL,	{ 1170000, 0, 0 } }, \
+		{ 1734000000UL,	{ 1227500, 0, 0 } }, \
+		{          0UL,	{       0, 0, 0 } }, \
+	}
+
+#define CPU_CVB_TABLE_EUCM2 \
+	.speedo_scale = 100,	\
+	.voltage_scale = 1000,	\
+	.entries = {		\
+		{  204000000UL,	{  742283, 0, 0 } }, \
+		{  306000000UL,	{  776249, 0, 0 } }, \
+		{  408000000UL,	{  810215, 0, 0 } }, \
+		{  510000000UL,	{  844181, 0, 0 } }, \
+		{  612000000UL,	{  878147, 0, 0 } }, \
+		{  714000000UL,	{  912113, 0, 0 } }, \
+		{  816000000UL,	{  946079, 0, 0 } }, \
+		{  918000000UL,	{  980045, 0, 0 } }, \
+		{ 1020000000UL,	{ 1014011, 0, 0 } }, \
+		{ 1122000000UL,	{ 1047977, 0, 0 } }, \
+		{ 1224000000UL,	{ 1081943, 0, 0 } }, \
+		{ 1326000000UL,	{ 1090000, 0, 0 } }, \
+		{ 1479000000UL,	{ 1090000, 0, 0 } }, \
+		{ 1555500000UL,	{ 1162000, 0, 0 } }, \
+		{ 1683000000UL,	{ 1195000, 0, 0 } }, \
+		{          0UL,	{       0, 0, 0 } }, \
+	}
+
+#define CPU_CVB_TABLE_EUCM2_JOINT_RAIL \
+	.speedo_scale = 100,	\
+	.voltage_scale = 1000,	\
+	.entries = {		\
+		{  204000000UL,	{  742283, 0, 0 } }, \
+		{  306000000UL,	{  776249, 0, 0 } }, \
+		{  408000000UL,	{  810215, 0, 0 } }, \
+		{  510000000UL,	{  844181, 0, 0 } }, \
+		{  612000000UL,	{  878147, 0, 0 } }, \
+		{  714000000UL,	{  912113, 0, 0 } }, \
+		{  816000000UL,	{  946079, 0, 0 } }, \
+		{  918000000UL,	{  980045, 0, 0 } }, \
+		{ 1020000000UL,	{ 1014011, 0, 0 } }, \
+		{ 1122000000UL,	{ 1047977, 0, 0 } }, \
+		{ 1224000000UL,	{ 1081943, 0, 0 } }, \
+		{ 1326000000UL,	{ 1090000, 0, 0 } }, \
+		{ 1479000000UL,	{ 1090000, 0, 0 } }, \
+		{ 1504500000UL,	{ 1120000, 0, 0 } }, \
+		{          0UL,	{       0, 0, 0 } }, \
+	}
+
+#define CPU_CVB_TABLE_ODN \
+	.speedo_scale = 100,	\
+	.voltage_scale = 1000,	\
+	.entries = {		\
+		{  204000000UL,	{  721094, 0, 0 } }, \
+		{  306000000UL,	{  754040, 0, 0 } }, \
+		{  408000000UL,	{  786986, 0, 0 } }, \
+		{  510000000UL,	{  819932, 0, 0 } }, \
+		{  612000000UL,	{  852878, 0, 0 } }, \
+		{  714000000UL,	{  885824, 0, 0 } }, \
+		{  816000000UL,	{  918770, 0, 0 } }, \
+		{  918000000UL,	{  915716, 0, 0 } }, \
+		{ 1020000000UL,	{  984662, 0, 0 } }, \
+		{ 1122000000UL,	{ 1017608, 0, 0 } }, \
+		{ 1224000000UL,	{ 1050554, 0, 0 } }, \
+		{ 1326000000UL,	{ 1083500, 0, 0 } }, \
+		{ 1428000000UL,	{ 1116446, 0, 0 } }, \
+		{ 1581000000UL,	{ 1130000, 0, 0 } }, \
+		{ 1683000000UL,	{ 1168000, 0, 0 } }, \
+		{ 1785000000UL,	{ 1227500, 0, 0 } }, \
+		{          0UL,	{       0, 0, 0 } }, \
+	}
+
+static struct cvb_table tegra210_cpu_cvb_tables[] = {
+	{
+		.speedo_id = 10,
+		.process_id = 0,
+		.min_millivolts = 840,
+		.max_millivolts = 1120,
+		CPU_CVB_TABLE_EUCM2_JOINT_RAIL,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune0_high = 0xffead0ff,
+			.tune1 = 0x20091d9,
+			.tune_high_min_millivolts = 864,
+		}
+	},
+	{
+		.speedo_id = 10,
+		.process_id = 1,
+		.min_millivolts = 840,
+		.max_millivolts = 1120,
+		CPU_CVB_TABLE_EUCM2_JOINT_RAIL,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune0_high = 0xffead0ff,
+			.tune1 = 0x20091d9,
+			.tune_high_min_millivolts = 864,
+		}
+	},
+	{
+		.speedo_id = 9,
+		.process_id = 0,
+		.min_millivolts = 900,
+		.max_millivolts = 1162,
+		CPU_CVB_TABLE_EUCM2,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune0_high = 0xffead0ff,
+			.tune1 = 0x20091d9,
+		}
+	},
+	{
+		.speedo_id = 9,
+		.process_id = 1,
+		.min_millivolts = 900,
+		.max_millivolts = 1162,
+		CPU_CVB_TABLE_EUCM2,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune0_high = 0xffead0ff,
+			.tune1 = 0x20091d9,
+		}
+	},
+	{
+		.speedo_id = 8,
+		.process_id = 0,
+		.min_millivolts = 900,
+		.max_millivolts = 1195,
+		CPU_CVB_TABLE_EUCM2,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune0_high = 0xffead0ff,
+			.tune1 = 0x20091d9,
+		}
+	},
+	{
+		.speedo_id = 8,
+		.process_id = 1,
+		.min_millivolts = 900,
+		.max_millivolts = 1195,
+		CPU_CVB_TABLE_EUCM2,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune0_high = 0xffead0ff,
+			.tune1 = 0x20091d9,
+		}
+	},
+	{
+		.speedo_id = 7,
+		.process_id = 0,
+		.min_millivolts = 841,
+		.max_millivolts = 1227,
+		CPU_CVB_TABLE_EUCM1,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune0_high = 0xffead0ff,
+			.tune1 = 0x20091d9,
+			.tune_high_min_millivolts = 864,
+		}
+	},
+	{
+		.speedo_id = 7,
+		.process_id = 1,
+		.min_millivolts = 841,
+		.max_millivolts = 1227,
+		CPU_CVB_TABLE_EUCM1,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune0_high = 0xffead0ff,
+			.tune1 = 0x20091d9,
+			.tune_high_min_millivolts = 864,
+		}
+	},
+	{
+		.speedo_id = 6,
+		.process_id = 0,
+		.min_millivolts = 870,
+		.max_millivolts = 1150,
+		CPU_CVB_TABLE,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune1 = 0x20091d9,
+		}
+	},
+	{
+		.speedo_id = 6,
+		.process_id = 1,
+		.min_millivolts = 870,
+		.max_millivolts = 1150,
+		CPU_CVB_TABLE,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune1 = 0x25501d0,
+		}
+	},
+	{
+		.speedo_id = 5,
+		.process_id = 0,
+		.min_millivolts = 818,
+		.max_millivolts = 1227,
+		CPU_CVB_TABLE,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune0_high = 0xffead0ff,
+			.tune1 = 0x20091d9,
+			.tune_high_min_millivolts = 864,
+		}
+	},
+	{
+		.speedo_id = 5,
+		.process_id = 1,
+		.min_millivolts = 818,
+		.max_millivolts = 1227,
+		CPU_CVB_TABLE,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune0_high = 0xffead0ff,
+			.tune1 = 0x25501d0,
+			.tune_high_min_millivolts = 864,
+		}
+	},
+	{
+		.speedo_id = 4,
+		.process_id = -1,
+		.min_millivolts = 918,
+		.max_millivolts = 1113,
+		CPU_CVB_TABLE_XA,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune1 = 0x17711BD,
+		}
+	},
+	{
+		.speedo_id = 3,
+		.process_id = 0,
+		.min_millivolts = 825,
+		.max_millivolts = 1227,
+		CPU_CVB_TABLE_ODN,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune0_high = 0xffead0ff,
+			.tune1 = 0x20091d9,
+			.tune_high_min_millivolts = 864,
+		}
+	},
+	{
+		.speedo_id = 3,
+		.process_id = 1,
+		.min_millivolts = 825,
+		.max_millivolts = 1227,
+		CPU_CVB_TABLE_ODN,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune0_high = 0xffead0ff,
+			.tune1 = 0x25501d0,
+			.tune_high_min_millivolts = 864,
+		}
+	},
+	{
+		.speedo_id = 2,
+		.process_id = 0,
+		.min_millivolts = 870,
+		.max_millivolts = 1227,
+		CPU_CVB_TABLE,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune1 = 0x20091d9,
+		}
+	},
+	{
+		.speedo_id = 2,
+		.process_id = 1,
+		.min_millivolts = 870,
+		.max_millivolts = 1227,
+		CPU_CVB_TABLE,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune1 = 0x25501d0,
+		}
+	},
+	{
+		.speedo_id = 1,
+		.process_id = 0,
+		.min_millivolts = 837,
+		.max_millivolts = 1227,
+		CPU_CVB_TABLE,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune0_high = 0xffead0ff,
+			.tune1 = 0x20091d9,
+			.tune_high_min_millivolts = 864,
+		}
+	},
+	{
+		.speedo_id = 1,
+		.process_id = 1,
+		.min_millivolts = 837,
+		.max_millivolts = 1227,
+		CPU_CVB_TABLE,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune0_high = 0xffead0ff,
+			.tune1 = 0x25501d0,
+			.tune_high_min_millivolts = 864,
+		}
+	},
+	{
+		.speedo_id = 0,
+		.process_id = 0,
+		.min_millivolts = 850,
+		.max_millivolts = 1170,
+		CPU_CVB_TABLE,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune0_high = 0xffead0ff,
+			.tune1 = 0x20091d9,
+			.tune_high_min_millivolts = 864,
+		}
+	},
+	{
+		.speedo_id = 0,
+		.process_id = 1,
+		.min_millivolts = 850,
+		.max_millivolts = 1170,
+		CPU_CVB_TABLE,
+		.cpu_dfll_data = {
+			.tune0_low = 0xffead0ff,
+			.tune0_high = 0xffead0ff,
+			.tune1 = 0x25501d0,
+			.tune_high_min_millivolts = 864,
+		}
+	},
+};
+
+static const struct dfll_fcpu_data tegra124_dfll_fcpu_data = {
+	.cpu_max_freq_table = tegra124_cpu_max_freq_table,
+	.cpu_max_freq_table_size = ARRAY_SIZE(tegra124_cpu_max_freq_table),
+	.cpu_cvb_tables = tegra124_cpu_cvb_tables,
+	.cpu_cvb_tables_size = ARRAY_SIZE(tegra124_cpu_cvb_tables)
+};
+
+static const struct dfll_fcpu_data tegra210_dfll_fcpu_data = {
+	.cpu_max_freq_table = tegra210_cpu_max_freq_table,
+	.cpu_max_freq_table_size = ARRAY_SIZE(tegra210_cpu_max_freq_table),
+	.cpu_cvb_tables = tegra210_cpu_cvb_tables,
+	.cpu_cvb_tables_size = ARRAY_SIZE(tegra210_cpu_cvb_tables),
+};
+
+static const struct of_device_id tegra124_dfll_fcpu_of_match[] = {
+	{
+		.compatible = "nvidia,tegra124-dfll",
+		.data = &tegra124_dfll_fcpu_data,
+	},
+	{
+		.compatible = "nvidia,tegra210-dfll",
+		.data = &tegra210_dfll_fcpu_data
+	},
+	{ },
+};
+
+static void get_alignment_from_dt(struct device *dev,
+				  struct rail_alignment *align)
+{
+	if (of_property_read_u32(dev->of_node,
+				 "nvidia,pwm-voltage-step-microvolts",
+				 &align->step_uv))
+		align->step_uv = 0;
+
+	if (of_property_read_u32(dev->of_node,
+				 "nvidia,pwm-min-microvolts",
+				 &align->offset_uv))
+		align->offset_uv = 0;
+}
+
+static int get_alignment_from_regulator(struct device *dev,
+					 struct rail_alignment *align)
+{
+	struct regulator *reg = devm_regulator_get(dev, "vdd-cpu");
+
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	align->offset_uv = regulator_list_voltage(reg, 0);
+	align->step_uv = regulator_get_linear_step(reg);
+
+	devm_regulator_put(reg);
+
+	return 0;
+}
+
 static int tegra124_dfll_fcpu_probe(struct platform_device *pdev)
 {
 	int process_id, speedo_id, speedo_value, err;
 	struct tegra_dfll_soc_data *soc;
+	const struct dfll_fcpu_data *fcpu_data;
+	struct rail_alignment align;
+
+	fcpu_data = of_device_get_match_data(&pdev->dev);
+	if (!fcpu_data)
+		return -ENODEV;
 
 	process_id = tegra_sku_info.cpu_process_id;
 	speedo_id = tegra_sku_info.cpu_speedo_id;
 	speedo_value = tegra_sku_info.cpu_speedo_value;
 
-	if (speedo_id >= ARRAY_SIZE(cpu_max_freq_table)) {
+	if (speedo_id >= fcpu_data->cpu_max_freq_table_size) {
 		dev_err(&pdev->dev, "unknown max CPU freq for speedo_id=%d\n",
 			speedo_id);
 		return -ENODEV;
@@ -107,12 +590,22 @@ static int tegra124_dfll_fcpu_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	soc->max_freq = cpu_max_freq_table[speedo_id];
+	if (of_property_read_bool(pdev->dev.of_node, "nvidia,pwm-to-pmic")) {
+		get_alignment_from_dt(&pdev->dev, &align);
+	} else {
+		err = get_alignment_from_regulator(&pdev->dev, &align);
+		if (err)
+			return err;
+	}
+
+	soc->max_freq = fcpu_data->cpu_max_freq_table[speedo_id];
+
+	soc->cvb = tegra_cvb_add_opp_table(soc->dev, fcpu_data->cpu_cvb_tables,
+					   fcpu_data->cpu_cvb_tables_size,
+					   &align, process_id, speedo_id,
+					   speedo_value, soc->max_freq);
+	soc->alignment = align;
 
-	soc->cvb = tegra_cvb_add_opp_table(soc->dev, tegra124_cpu_cvb_tables,
-					   ARRAY_SIZE(tegra124_cpu_cvb_tables),
-					   process_id, speedo_id, speedo_value,
-					   soc->max_freq);
 	if (IS_ERR(soc->cvb)) {
 		dev_err(&pdev->dev, "couldn't add OPP table: %ld\n",
 			PTR_ERR(soc->cvb));
@@ -144,11 +637,6 @@ static int tegra124_dfll_fcpu_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id tegra124_dfll_fcpu_of_match[] = {
-	{ .compatible = "nvidia,tegra124-dfll", },
-	{ },
-};
-
 static const struct dev_pm_ops tegra124_dfll_pm_ops = {
 	SET_RUNTIME_PM_OPS(tegra_dfll_runtime_suspend,
 			   tegra_dfll_runtime_resume, NULL)
diff --git a/drivers/clk/tegra/cvb.c b/drivers/clk/tegra/cvb.c
index da9e8e7b5ce5..35eeb6adc68e 100644
--- a/drivers/clk/tegra/cvb.c
+++ b/drivers/clk/tegra/cvb.c
@@ -1,7 +1,7 @@
 /*
  * Utility functions for parsing Tegra CVB voltage tables
  *
- * Copyright (C) 2012-2014 NVIDIA Corporation.  All rights reserved.
+ * Copyright (C) 2012-2019 NVIDIA Corporation.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -62,9 +62,9 @@ static int round_voltage(int mv, const struct rail_alignment *align, int up)
 }
 
 static int build_opp_table(struct device *dev, const struct cvb_table *table,
+			   struct rail_alignment *align,
 			   int speedo_value, unsigned long max_freq)
 {
-	const struct rail_alignment *align = &table->alignment;
 	int i, ret, dfll_mv, min_mv, max_mv;
 
 	min_mv = round_voltage(table->min_millivolts, align, UP);
@@ -109,8 +109,9 @@ static int build_opp_table(struct device *dev, const struct cvb_table *table,
  */
 const struct cvb_table *
 tegra_cvb_add_opp_table(struct device *dev, const struct cvb_table *tables,
-			size_t count, int process_id, int speedo_id,
-			int speedo_value, unsigned long max_freq)
+			size_t count, struct rail_alignment *align,
+			int process_id, int speedo_id, int speedo_value,
+			unsigned long max_freq)
 {
 	size_t i;
 	int ret;
@@ -124,7 +125,8 @@ tegra_cvb_add_opp_table(struct device *dev, const struct cvb_table *tables,
 		if (table->process_id != -1 && table->process_id != process_id)
 			continue;
 
-		ret = build_opp_table(dev, table, speedo_value, max_freq);
+		ret = build_opp_table(dev, table, align, speedo_value,
+				      max_freq);
 		return ret ? ERR_PTR(ret) : table;
 	}
 
diff --git a/drivers/clk/tegra/cvb.h b/drivers/clk/tegra/cvb.h
index c1f077993b2a..91a1941c21ef 100644
--- a/drivers/clk/tegra/cvb.h
+++ b/drivers/clk/tegra/cvb.h
@@ -41,6 +41,7 @@ struct cvb_cpu_dfll_data {
 	u32 tune0_low;
 	u32 tune0_high;
 	u32 tune1;
+	unsigned int tune_high_min_millivolts;
 };
 
 struct cvb_table {
@@ -49,7 +50,6 @@ struct cvb_table {
 
 	int min_millivolts;
 	int max_millivolts;
-	struct rail_alignment alignment;
 
 	int speedo_scale;
 	int voltage_scale;
@@ -59,8 +59,9 @@ struct cvb_table {
 
 const struct cvb_table *
 tegra_cvb_add_opp_table(struct device *dev, const struct cvb_table *cvb_tables,
-			size_t count, int process_id, int speedo_id,
-			int speedo_value, unsigned long max_freq);
+			size_t count, struct rail_alignment *align,
+			int process_id, int speedo_id, int speedo_value,
+			unsigned long max_freq);
 void tegra_cvb_remove_opp_table(struct device *dev,
 				const struct cvb_table *table,
 				unsigned long max_freq);