ACPICA: Split resource descriptor decode strings to a new file

ACPICA commit 00906ae0aff4c6b76abc232ef99700e7d7c0e325

There are enough of these strings to justify a separate file.
Also, these strings are only used for the disassembler and
the debugger. Thus, this change improves ACPICA modularity.

Link: https://github.com/acpica/acpica/commit/00906ae0
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

3 files changed, 316 insertions, 264 deletions

diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index dea65306b687..b125bdd3d58b 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -172,6 +172,7 @@ acpi-y +=		\
 	utosi.o		\
 	utownerid.o	\
 	utpredef.o	\
+	utresdecode.o	\
 	utresrc.o	\
 	utstate.o	\
 	utstring.o	\
diff --git a/drivers/acpi/acpica/utresdecode.c b/drivers/acpi/acpica/utresdecode.c
new file mode 100644
index 000000000000..e15a2538558b
--- /dev/null
+++ b/drivers/acpi/acpica/utresdecode.c
@@ -0,0 +1,315 @@
+/*******************************************************************************
+ *
+ * Module Name: utresdecode - Resource descriptor keyword strings
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2017, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acresrc.h"
+
+#define _COMPONENT          ACPI_UTILITIES
+ACPI_MODULE_NAME("utresdecode")
+
+#if defined (ACPI_DEBUG_OUTPUT) || \
+	defined (ACPI_DISASSEMBLER) || \
+	defined (ACPI_DEBUGGER)
+/*
+ * Strings used to decode resource descriptors.
+ * Used by both the disassembler and the debugger resource dump routines
+ */
+const char *acpi_gbl_bm_decode[] = {
+	"NotBusMaster",
+	"BusMaster"
+};
+
+const char *acpi_gbl_config_decode[] = {
+	"0 - Good Configuration",
+	"1 - Acceptable Configuration",
+	"2 - Suboptimal Configuration",
+	"3 - ***Invalid Configuration***",
+};
+
+const char *acpi_gbl_consume_decode[] = {
+	"ResourceProducer",
+	"ResourceConsumer"
+};
+
+const char *acpi_gbl_dec_decode[] = {
+	"PosDecode",
+	"SubDecode"
+};
+
+const char *acpi_gbl_he_decode[] = {
+	"Level",
+	"Edge"
+};
+
+const char *acpi_gbl_io_decode[] = {
+	"Decode10",
+	"Decode16"
+};
+
+const char *acpi_gbl_ll_decode[] = {
+	"ActiveHigh",
+	"ActiveLow",
+	"ActiveBoth",
+	"Reserved"
+};
+
+const char *acpi_gbl_max_decode[] = {
+	"MaxNotFixed",
+	"MaxFixed"
+};
+
+const char *acpi_gbl_mem_decode[] = {
+	"NonCacheable",
+	"Cacheable",
+	"WriteCombining",
+	"Prefetchable"
+};
+
+const char *acpi_gbl_min_decode[] = {
+	"MinNotFixed",
+	"MinFixed"
+};
+
+const char *acpi_gbl_mtp_decode[] = {
+	"AddressRangeMemory",
+	"AddressRangeReserved",
+	"AddressRangeACPI",
+	"AddressRangeNVS"
+};
+
+const char *acpi_gbl_rng_decode[] = {
+	"InvalidRanges",
+	"NonISAOnlyRanges",
+	"ISAOnlyRanges",
+	"EntireRange"
+};
+
+const char *acpi_gbl_rw_decode[] = {
+	"ReadOnly",
+	"ReadWrite"
+};
+
+const char *acpi_gbl_shr_decode[] = {
+	"Exclusive",
+	"Shared",
+	"ExclusiveAndWake",	/* ACPI 5.0 */
+	"SharedAndWake"		/* ACPI 5.0 */
+};
+
+const char *acpi_gbl_siz_decode[] = {
+	"Transfer8",
+	"Transfer8_16",
+	"Transfer16",
+	"InvalidSize"
+};
+
+const char *acpi_gbl_trs_decode[] = {
+	"DenseTranslation",
+	"SparseTranslation"
+};
+
+const char *acpi_gbl_ttp_decode[] = {
+	"TypeStatic",
+	"TypeTranslation"
+};
+
+const char *acpi_gbl_typ_decode[] = {
+	"Compatibility",
+	"TypeA",
+	"TypeB",
+	"TypeF"
+};
+
+const char *acpi_gbl_ppc_decode[] = {
+	"PullDefault",
+	"PullUp",
+	"PullDown",
+	"PullNone"
+};
+
+const char *acpi_gbl_ior_decode[] = {
+	"IoRestrictionNone",
+	"IoRestrictionInputOnly",
+	"IoRestrictionOutputOnly",
+	"IoRestrictionNoneAndPreserve"
+};
+
+const char *acpi_gbl_dts_decode[] = {
+	"Width8bit",
+	"Width16bit",
+	"Width32bit",
+	"Width64bit",
+	"Width128bit",
+	"Width256bit",
+};
+
+/* GPIO connection type */
+
+const char *acpi_gbl_ct_decode[] = {
+	"Interrupt",
+	"I/O"
+};
+
+/* Serial bus type */
+
+const char *acpi_gbl_sbt_decode[] = {
+	"/* UNKNOWN serial bus type */",
+	"I2C",
+	"SPI",
+	"UART"
+};
+
+/* I2C serial bus access mode */
+
+const char *acpi_gbl_am_decode[] = {
+	"AddressingMode7Bit",
+	"AddressingMode10Bit"
+};
+
+/* I2C serial bus slave mode */
+
+const char *acpi_gbl_sm_decode[] = {
+	"ControllerInitiated",
+	"DeviceInitiated"
+};
+
+/* SPI serial bus wire mode */
+
+const char *acpi_gbl_wm_decode[] = {
+	"FourWireMode",
+	"ThreeWireMode"
+};
+
+/* SPI serial clock phase */
+
+const char *acpi_gbl_cph_decode[] = {
+	"ClockPhaseFirst",
+	"ClockPhaseSecond"
+};
+
+/* SPI serial bus clock polarity */
+
+const char *acpi_gbl_cpo_decode[] = {
+	"ClockPolarityLow",
+	"ClockPolarityHigh"
+};
+
+/* SPI serial bus device polarity */
+
+const char *acpi_gbl_dp_decode[] = {
+	"PolarityLow",
+	"PolarityHigh"
+};
+
+/* UART serial bus endian */
+
+const char *acpi_gbl_ed_decode[] = {
+	"LittleEndian",
+	"BigEndian"
+};
+
+/* UART serial bus bits per byte */
+
+const char *acpi_gbl_bpb_decode[] = {
+	"DataBitsFive",
+	"DataBitsSix",
+	"DataBitsSeven",
+	"DataBitsEight",
+	"DataBitsNine",
+	"/* UNKNOWN Bits per byte */",
+	"/* UNKNOWN Bits per byte */",
+	"/* UNKNOWN Bits per byte */"
+};
+
+/* UART serial bus stop bits */
+
+const char *acpi_gbl_sb_decode[] = {
+	"StopBitsZero",
+	"StopBitsOne",
+	"StopBitsOnePlusHalf",
+	"StopBitsTwo"
+};
+
+/* UART serial bus flow control */
+
+const char *acpi_gbl_fc_decode[] = {
+	"FlowControlNone",
+	"FlowControlHardware",
+	"FlowControlXON",
+	"/* UNKNOWN flow control keyword */"
+};
+
+/* UART serial bus parity type */
+
+const char *acpi_gbl_pt_decode[] = {
+	"ParityTypeNone",
+	"ParityTypeEven",
+	"ParityTypeOdd",
+	"ParityTypeMark",
+	"ParityTypeSpace",
+	"/* UNKNOWN parity keyword */",
+	"/* UNKNOWN parity keyword */",
+	"/* UNKNOWN parity keyword */"
+};
+
+/* pin_config type */
+
+const char *acpi_gbl_ptyp_decode[] = {
+	"Default",
+	"Bias Pull-up",
+	"Bias Pull-down",
+	"Bias Default",
+	"Bias Disable",
+	"Bias High Impedance",
+	"Bias Bus Hold",
+	"Drive Open Drain",
+	"Drive Open Source",
+	"Drive Push Pull",
+	"Drive Strength",
+	"Slew Rate",
+	"Input Debounce",
+	"Input Schmitt Trigger",
+};
+
+#endif
diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c
index b4282ea32262..5fa992027b74 100644
--- a/drivers/acpi/acpica/utresrc.c
+++ b/drivers/acpi/acpica/utresrc.c
@@ -48,270 +48,6 @@
 #define _COMPONENT          ACPI_UTILITIES
 ACPI_MODULE_NAME("utresrc")
 
-#if defined(ACPI_DEBUG_OUTPUT) || defined (ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER)
-/*
- * Strings used to decode resource descriptors.
- * Used by both the disassembler and the debugger resource dump routines
- */
-const char *acpi_gbl_bm_decode[] = {
-	"NotBusMaster",
-	"BusMaster"
-};
-
-const char *acpi_gbl_config_decode[] = {
-	"0 - Good Configuration",
-	"1 - Acceptable Configuration",
-	"2 - Suboptimal Configuration",
-	"3 - ***Invalid Configuration***",
-};
-
-const char *acpi_gbl_consume_decode[] = {
-	"ResourceProducer",
-	"ResourceConsumer"
-};
-
-const char *acpi_gbl_dec_decode[] = {
-	"PosDecode",
-	"SubDecode"
-};
-
-const char *acpi_gbl_he_decode[] = {
-	"Level",
-	"Edge"
-};
-
-const char *acpi_gbl_io_decode[] = {
-	"Decode10",
-	"Decode16"
-};
-
-const char *acpi_gbl_ll_decode[] = {
-	"ActiveHigh",
-	"ActiveLow",
-	"ActiveBoth",
-	"Reserved"
-};
-
-const char *acpi_gbl_max_decode[] = {
-	"MaxNotFixed",
-	"MaxFixed"
-};
-
-const char *acpi_gbl_mem_decode[] = {
-	"NonCacheable",
-	"Cacheable",
-	"WriteCombining",
-	"Prefetchable"
-};
-
-const char *acpi_gbl_min_decode[] = {
-	"MinNotFixed",
-	"MinFixed"
-};
-
-const char *acpi_gbl_mtp_decode[] = {
-	"AddressRangeMemory",
-	"AddressRangeReserved",
-	"AddressRangeACPI",
-	"AddressRangeNVS"
-};
-
-const char *acpi_gbl_rng_decode[] = {
-	"InvalidRanges",
-	"NonISAOnlyRanges",
-	"ISAOnlyRanges",
-	"EntireRange"
-};
-
-const char *acpi_gbl_rw_decode[] = {
-	"ReadOnly",
-	"ReadWrite"
-};
-
-const char *acpi_gbl_shr_decode[] = {
-	"Exclusive",
-	"Shared",
-	"ExclusiveAndWake",	/* ACPI 5.0 */
-	"SharedAndWake"		/* ACPI 5.0 */
-};
-
-const char *acpi_gbl_siz_decode[] = {
-	"Transfer8",
-	"Transfer8_16",
-	"Transfer16",
-	"InvalidSize"
-};
-
-const char *acpi_gbl_trs_decode[] = {
-	"DenseTranslation",
-	"SparseTranslation"
-};
-
-const char *acpi_gbl_ttp_decode[] = {
-	"TypeStatic",
-	"TypeTranslation"
-};
-
-const char *acpi_gbl_typ_decode[] = {
-	"Compatibility",
-	"TypeA",
-	"TypeB",
-	"TypeF"
-};
-
-const char *acpi_gbl_ppc_decode[] = {
-	"PullDefault",
-	"PullUp",
-	"PullDown",
-	"PullNone"
-};
-
-const char *acpi_gbl_ior_decode[] = {
-	"IoRestrictionNone",
-	"IoRestrictionInputOnly",
-	"IoRestrictionOutputOnly",
-	"IoRestrictionNoneAndPreserve"
-};
-
-const char *acpi_gbl_dts_decode[] = {
-	"Width8bit",
-	"Width16bit",
-	"Width32bit",
-	"Width64bit",
-	"Width128bit",
-	"Width256bit",
-};
-
-/* GPIO connection type */
-
-const char *acpi_gbl_ct_decode[] = {
-	"Interrupt",
-	"I/O"
-};
-
-/* Serial bus type */
-
-const char *acpi_gbl_sbt_decode[] = {
-	"/* UNKNOWN serial bus type */",
-	"I2C",
-	"SPI",
-	"UART"
-};
-
-/* I2C serial bus access mode */
-
-const char *acpi_gbl_am_decode[] = {
-	"AddressingMode7Bit",
-	"AddressingMode10Bit"
-};
-
-/* I2C serial bus slave mode */
-
-const char *acpi_gbl_sm_decode[] = {
-	"ControllerInitiated",
-	"DeviceInitiated"
-};
-
-/* SPI serial bus wire mode */
-
-const char *acpi_gbl_wm_decode[] = {
-	"FourWireMode",
-	"ThreeWireMode"
-};
-
-/* SPI serial clock phase */
-
-const char *acpi_gbl_cph_decode[] = {
-	"ClockPhaseFirst",
-	"ClockPhaseSecond"
-};
-
-/* SPI serial bus clock polarity */
-
-const char *acpi_gbl_cpo_decode[] = {
-	"ClockPolarityLow",
-	"ClockPolarityHigh"
-};
-
-/* SPI serial bus device polarity */
-
-const char *acpi_gbl_dp_decode[] = {
-	"PolarityLow",
-	"PolarityHigh"
-};
-
-/* UART serial bus endian */
-
-const char *acpi_gbl_ed_decode[] = {
-	"LittleEndian",
-	"BigEndian"
-};
-
-/* UART serial bus bits per byte */
-
-const char *acpi_gbl_bpb_decode[] = {
-	"DataBitsFive",
-	"DataBitsSix",
-	"DataBitsSeven",
-	"DataBitsEight",
-	"DataBitsNine",
-	"/* UNKNOWN Bits per byte */",
-	"/* UNKNOWN Bits per byte */",
-	"/* UNKNOWN Bits per byte */"
-};
-
-/* UART serial bus stop bits */
-
-const char *acpi_gbl_sb_decode[] = {
-	"StopBitsZero",
-	"StopBitsOne",
-	"StopBitsOnePlusHalf",
-	"StopBitsTwo"
-};
-
-/* UART serial bus flow control */
-
-const char *acpi_gbl_fc_decode[] = {
-	"FlowControlNone",
-	"FlowControlHardware",
-	"FlowControlXON",
-	"/* UNKNOWN flow control keyword */"
-};
-
-/* UART serial bus parity type */
-
-const char *acpi_gbl_pt_decode[] = {
-	"ParityTypeNone",
-	"ParityTypeEven",
-	"ParityTypeOdd",
-	"ParityTypeMark",
-	"ParityTypeSpace",
-	"/* UNKNOWN parity keyword */",
-	"/* UNKNOWN parity keyword */",
-	"/* UNKNOWN parity keyword */"
-};
-
-/* pin_config type */
-
-const char *acpi_gbl_ptyp_decode[] = {
-	"Default",
-	"Bias Pull-up",
-	"Bias Pull-down",
-	"Bias Default",
-	"Bias Disable",
-	"Bias High Impedance",
-	"Bias Bus Hold",
-	"Drive Open Drain",
-	"Drive Open Source",
-	"Drive Push Pull",
-	"Drive Strength",
-	"Slew Rate",
-	"Input Debounce",
-	"Input Schmitt Trigger",
-};
-
-#endif
-
 /*
  * Base sizes of the raw AML resource descriptors, indexed by resource type.
  * Zero indicates a reserved (and therefore invalid) resource type.