diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2012-08-24 15:22:12 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2012-09-19 17:42:18 +0200 |
| commit | 436d42c61c3eef1d02256174c8615046c61a28ad (patch) | |
| tree | 307432ed7b49bde1715200ec2b32eb92e83187e5 /arch/arm | |
| parent | c02cecb92ed49f36196ee9e29d29c4cfcbad05ae (diff) | |
ARM: samsung: move platform_data definitions
Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.
This moves such data out of the samsung include directories
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Bryan Wu <bryan.wu@canonical.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: linux-samsung-soc@vger.kernel.org
Diffstat (limited to 'arch/arm')
89 files changed, 146 insertions, 815 deletions
diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c index b33a5b67b547..ae321c7cb15f 100644 --- a/arch/arm/mach-exynos/dev-audio.c +++ b/arch/arm/mach-exynos/dev-audio.c @@ -16,7 +16,7 @@ #include <linux/gpio.h> #include <plat/gpio-cfg.h> -#include <plat/audio.h> +#include <linux/platform_data/asoc-s3c.h> #include <mach/map.h> #include <mach/dma.h> diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c index b8e75300c77d..14ed7951a2c6 100644 --- a/arch/arm/mach-exynos/dev-ohci.c +++ b/arch/arm/mach-exynos/dev-ohci.c @@ -15,7 +15,7 @@ #include <mach/irqs.h> #include <mach/map.h> -#include <mach/ohci.h> +#include <linux/platform_data/usb-exynos.h> #include <plat/devs.h> #include <plat/usb-phy.h> diff --git a/arch/arm/mach-exynos/include/mach/ohci.h b/arch/arm/mach-exynos/include/mach/ohci.h deleted file mode 100644 index c256c595be5e..000000000000 --- a/arch/arm/mach-exynos/include/mach/ohci.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __MACH_EXYNOS_OHCI_H -#define __MACH_EXYNOS_OHCI_H - -struct exynos4_ohci_platdata { - int (*phy_init)(struct platform_device *pdev, int type); - int (*phy_exit)(struct platform_device *pdev, int type); -}; - -extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd); - -#endif /* __MACH_EXYNOS_OHCI_H */ diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index ea785fcaf6c3..393d2ce99af7 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -45,14 +45,14 @@ #include <plat/devs.h> #include <plat/fb.h> #include <plat/sdhci.h> -#include <plat/ehci.h> +#include <linux/platform_data/usb-ehci-s5p.h> #include <plat/clock.h> #include <plat/gpio-cfg.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/mfc.h> #include <plat/fimc-core.h> #include <plat/camport.h> -#include <plat/mipi_csis.h> +#include <linux/platform_data/mipi-csis.h> #include <mach/map.h> diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 5ca80307d6d7..4a531dccd0c6 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -35,15 +35,15 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/sdhci.h> -#include <plat/iic.h> -#include <plat/ehci.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/usb-ehci-s5p.h> #include <plat/clock.h> #include <plat/gpio-cfg.h> #include <plat/backlight.h> #include <plat/fb.h> #include <plat/mfc.h> -#include <mach/ohci.h> +#include <linux/platform_data/usb-exynos.h> #include <mach/map.h> #include <drm/exynos_drm.h> diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index b26beb13ebef..6a791fd4fb0d 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -32,7 +32,7 @@ #include <plat/devs.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/keypad.h> #include <plat/mfc.h> #include <plat/regs-fb.h> diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 3cfa688d274a..fa2ada6c9ca7 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -34,15 +34,15 @@ #include <plat/fb.h> #include <plat/keypad.h> #include <plat/sdhci.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> #include <plat/backlight.h> #include <plat/mfc.h> -#include <plat/ehci.h> +#include <linux/platform_data/usb-ehci-s5p.h> #include <plat/clock.h> #include <mach/map.h> -#include <mach/ohci.h> +#include <linux/platform_data/usb-exynos.h> #include <drm/exynos_drm.h> #include "common.h" diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 4d1f40d44ed1..bc49e5ab200b 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -34,7 +34,7 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> #include <plat/fb.h> #include <plat/mfc.h> @@ -43,7 +43,7 @@ #include <plat/fimc-core.h> #include <plat/s5p-time.h> #include <plat/camport.h> -#include <plat/mipi_csis.h> +#include <linux/platform_data/mipi-csis.h> #include <mach/map.h> diff --git a/arch/arm/mach-exynos/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c index b90d94c17f7c..5700f23629f7 100644 --- a/arch/arm/mach-exynos/setup-i2c0.c +++ b/arch/arm/mach-exynos/setup-i2c0.c @@ -14,7 +14,7 @@ struct platform_device; /* don't need the contents */ #include <linux/gpio.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-exynos/setup-i2c1.c b/arch/arm/mach-exynos/setup-i2c1.c index fd7235a43f6e..8d2279cc85dc 100644 --- a/arch/arm/mach-exynos/setup-i2c1.c +++ b/arch/arm/mach-exynos/setup-i2c1.c @@ -13,7 +13,7 @@ struct platform_device; /* don't need the contents */ #include <linux/gpio.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c1_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-exynos/setup-i2c2.c b/arch/arm/mach-exynos/setup-i2c2.c index 2694b19e8b37..0ed62fc42a77 100644 --- a/arch/arm/mach-exynos/setup-i2c2.c +++ b/arch/arm/mach-exynos/setup-i2c2.c @@ -13,7 +13,7 @@ struct platform_device; /* don't need the contents */ #include <linux/gpio.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c2_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-exynos/setup-i2c3.c b/arch/arm/mach-exynos/setup-i2c3.c index 379bd306993f..7787fd26076b 100644 --- a/arch/arm/mach-exynos/setup-i2c3.c +++ b/arch/arm/mach-exynos/setup-i2c3.c @@ -13,7 +13,7 @@ struct platform_device; /* don't need the contents */ #include <linux/gpio.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c3_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-exynos/setup-i2c4.c b/arch/arm/mach-exynos/setup-i2c4.c index 9f3c04855b76..edc847f89826 100644 --- a/arch/arm/mach-exynos/setup-i2c4.c +++ b/arch/arm/mach-exynos/setup-i2c4.c @@ -13,7 +13,7 @@ struct platform_device; /* don't need the contents */ #include <linux/gpio.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c4_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-exynos/setup-i2c5.c b/arch/arm/mach-exynos/setup-i2c5.c index 77e1a1e57c76..d88af7f75954 100644 --- a/arch/arm/mach-exynos/setup-i2c5.c +++ b/arch/arm/mach-exynos/setup-i2c5.c @@ -13,7 +13,7 @@ struct platform_device; /* don't need the contents */ #include <linux/gpio.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c5_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-exynos/setup-i2c6.c b/arch/arm/mach-exynos/setup-i2c6.c index 284d12b7af0e..c590286c9d3a 100644 --- a/arch/arm/mach-exynos/setup-i2c6.c +++ b/arch/arm/mach-exynos/setup-i2c6.c @@ -13,7 +13,7 @@ struct platform_device; /* don't need the contents */ #include <linux/gpio.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c6_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-exynos/setup-i2c7.c b/arch/arm/mach-exynos/setup-i2c7.c index b7611ee359a2..1bba75568a5f 100644 --- a/arch/arm/mach-exynos/setup-i2c7.c +++ b/arch/arm/mach-exynos/setup-i2c7.c @@ -13,7 +13,7 @@ struct platform_device; /* don't need the contents */ #include <linux/gpio.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c7_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c index 87e75a250d5e..3b2cf6db3634 100644 --- a/arch/arm/mach-s3c24xx/common-smdk.c +++ b/arch/arm/mach-s3c24xx/common-smdk.c @@ -37,9 +37,9 @@ #include <asm/irq.h> #include <mach/regs-gpio.h> -#include <mach/leds-gpio.h> +#include <linux/platform_data/leds-s3c24xx.h> -#include <plat/nand.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> #include <plat/common-smdk.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h b/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h deleted file mode 100644 index d8a7672519b6..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h +++ /dev/null @@ -1,28 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h - * - * Copyright (c) 2006 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX - LEDs GPIO connector - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_LEDSGPIO_H -#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h" - -#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */ -#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */ - -struct s3c24xx_led_platdata { - unsigned int gpio; - unsigned int flags; - - char *name; - char *def_trigger; -}; - -#endif /* __ASM_ARCH_LEDSGPIO_H */ diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index ea2c4b003d58..f4ad99c1e476 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -53,7 +53,7 @@ #include <mach/regs-lcd.h> #include <mach/regs-gpio.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 5a7d0c0010f7..df890fbad8ad 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -40,8 +40,8 @@ #include <mach/regs-gpio.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> -#include <plat/nand.h> -#include <plat/iic.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -53,7 +53,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/audio-simtec.h> +#include <linux/platform_data/asoc-s3c24xx_simtec.h> #include "simtec.h" #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index 7a05abf1270b..00381fe5de32 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -36,8 +36,8 @@ #include <mach/regs-gpio.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> -#include <plat/nand.h> -#include <plat/iic.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -47,7 +47,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/mci.h> +#include <linux/platform_data/mmc-s3cmci.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index 1cf1720682d3..6a30ce7e4aa7 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -45,9 +45,9 @@ #include <mach/regs-mem.h> #include <mach/regs-lcd.h> -#include <plat/hwmon.h> -#include <plat/nand.h> -#include <plat/iic.h> +#include <linux/platform_data/hwmon-s3c.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <mach/fb.h> #include <linux/mtd/mtd.h> @@ -62,7 +62,7 @@ #include <plat/cpu.h> #include <plat/cpu-freq.h> #include <plat/gpio-cfg.h> -#include <plat/audio-simtec.h> +#include <linux/platform_data/asoc-s3c24xx_simtec.h> #include "simtec.h" #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index 92e1f93a6bca..4a963467b7ee 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -73,21 +73,21 @@ #include <mach/regs-gpio.h> #include <mach/fb.h> -#include <plat/usb-control.h> +#include <linux/platform_data/usb-ohci-s3c2410.h> #include <mach/regs-mem.h> #include <mach/hardware.h> #include <mach/gta02.h> #include <plat/regs-serial.h> -#include <plat/nand.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/udc.h> +#include <linux/platform_data/usb-s3c2410_udc.h> #include <plat/gpio-cfg.h> -#include <plat/iic.h> -#include <plat/ts.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/touchscreen-s3c2410.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index bb8d008d5a5c..9638b337593c 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -56,8 +56,8 @@ #include <mach/h1940.h> #include <mach/h1940-latch.h> #include <mach/fb.h> -#include <plat/udc.h> -#include <plat/iic.h> +#include <linux/platform_data/usb-s3c2410_udc.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> @@ -65,8 +65,8 @@ #include <plat/cpu.h> #include <plat/pll.h> #include <plat/pm.h> -#include <plat/mci.h> -#include <plat/ts.h> +#include <linux/platform_data/mmc-s3cmci.h> +#include <linux/platform_data/touchscreen-s3c2410.h> #include <sound/uda1380.h> diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index ae73ba34ecc6..28ad25b3669e 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -32,8 +32,8 @@ #include <asm/mach/irq.h> #include <plat/regs-serial.h> -#include <plat/nand.h> -#include <plat/iic.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <mach/regs-power.h> #include <mach/regs-gpio.h> @@ -54,7 +54,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/udc.h> +#include <linux/platform_data/usb-s3c2410_udc.h> static struct map_desc jive_iodesc[] __initdata = { }; diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index bd6d2525debe..c676b8ecbd17 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -39,14 +39,14 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <mach/leds-gpio.h> +#include <linux/platform_data/leds-s3c24xx.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/irqs.h> -#include <plat/nand.h> -#include <plat/iic.h> -#include <plat/mci.h> -#include <plat/udc.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/mmc-s3cmci.h> +#include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 383d00ca8f60..c53a9bfe1417 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -33,7 +33,7 @@ #include <asm/mach-types.h> #include <mach/fb.h> -#include <mach/leds-gpio.h> +#include <linux/platform_data/leds-s3c24xx.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> @@ -41,15 +41,15 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/regs-serial.h> #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/mci.h> +#include <linux/platform_data/mmc-s3cmci.h> #include <plat/s3c2410.h> -#include <plat/udc.h> +#include <linux/platform_data/usb-s3c2410_udc.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 5c05ba1c330f..784132139e5a 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -38,7 +38,7 @@ //#include <asm/debug-ll.h> #include <mach/regs-gpio.h> #include <plat/regs-serial.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> #include <plat/s3c2410.h> diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index 95d077255024..63c20019e89e 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -41,8 +41,8 @@ #include <mach/regs-gpio.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> -#include <plat/nand.h> -#include <plat/iic.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index bc4b6efb3b27..bca39f0232b3 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -35,7 +35,7 @@ #include <plat/s3c2410.h> #include <plat/clock.h> #include <plat/devs.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/cpu.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 678bbca2b5e5..7b6ba13d7285 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -47,13 +47,13 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <mach/leds-gpio.h> +#include <linux/platform_data/leds-s3c24xx.h> #include <mach/regs-lcd.h> #include <plat/regs-serial.h> #include <mach/fb.h> -#include <plat/nand.h> -#include <plat/udc.h> -#include <plat/iic.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> +#include <linux/platform_data/usb-s3c2410_udc.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/common-smdk.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 7ee73f27f207..379fde521d37 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -49,15 +49,15 @@ #include <plat/clock.h> #include <plat/regs-serial.h> #include <plat/regs-iic.h> -#include <plat/mci.h> -#include <plat/udc.h> -#include <plat/nand.h> -#include <plat/iic.h> +#include <linux/platform_data/mmc-s3cmci.h> +#include <linux/platform_data/usb-s3c2410_udc.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> #include <plat/irq.h> -#include <plat/ts.h> +#include <linux/platform_data/touchscreen-s3c2410.h> #include <sound/uda1380.h> diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index 56af35447598..dacbb9a2122a 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -43,7 +43,7 @@ #include <mach/regs-lcd.h> #include <mach/h1940.h> -#include <plat/nand.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> #include <mach/fb.h> #include <plat/clock.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index bdc27e772876..82796b97cb04 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -47,7 +47,7 @@ #include <asm/mach-types.h> #include <plat/regs-serial.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index b11451b853d8..ce99fd8bbbc5 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -38,8 +38,8 @@ #include <mach/regs-lcd.h> #include <mach/idle.h> -#include <plat/udc.h> -#include <plat/iic.h> +#include <linux/platform_data/usb-s3c2410_udc.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <mach/fb.h> #include <plat/s3c2410.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index c3100a044fbe..db2787aa1e5e 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -39,17 +39,17 @@ #include <mach/regs-s3c2443-clock.h> #include <mach/idle.h> -#include <mach/leds-gpio.h> -#include <plat/iic.h> +#include <linux/platform_data/leds-s3c24xx.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/s3c2416.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/nand.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> #include <plat/sdhci.h> -#include <plat/udc.h> +#include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/s3c-hsudc.h> #include <plat/regs-fb-v4.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index 83a1036d7dcb..b7ff882c6ce6 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -37,7 +37,7 @@ #include <mach/idle.h> #include <mach/fb.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/s3c2410.h> #include <plat/s3c244x.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 209236956222..2568656f046f 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -37,7 +37,7 @@ #include <mach/idle.h> #include <mach/fb.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/s3c2410.h> #include <plat/s3c2443.h> diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index fe990289ee7d..495bf5cf52e9 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -45,7 +45,7 @@ #include <asm/mach-types.h> #include <plat/regs-serial.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index bd5f189f0424..14d5b12e388c 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -43,13 +43,13 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <mach/leds-gpio.h> +#include <linux/platform_data/leds-s3c24xx.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/iic.h> -#include <plat/audio-simtec.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/asoc-s3c24xx_simtec.h> #include "simtec.h" #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 94bfaa1fb148..f1d44ae11833 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -39,8 +39,8 @@ #include <mach/idle.h> #include <mach/fb.h> -#include <plat/iic.h> -#include <plat/nand.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> #include <plat/s3c2410.h> #include <plat/s3c2412.h> diff --git a/arch/arm/mach-s3c24xx/setup-i2c.c b/arch/arm/mach-s3c24xx/setup-i2c.c index 9e90a7cbd1d6..7b4f33332d19 100644 --- a/arch/arm/mach-s3c24xx/setup-i2c.c +++ b/arch/arm/mach-s3c24xx/setup-i2c.c @@ -16,7 +16,7 @@ struct platform_device; #include <plat/gpio-cfg.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <mach/hardware.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/mach-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c24xx/simtec-audio.c index 11881c9a38c0..fd0ef05763a9 100644 --- a/arch/arm/mach-s3c24xx/simtec-audio.c +++ b/arch/arm/mach-s3c24xx/simtec-audio.c @@ -24,7 +24,7 @@ #include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <plat/audio-simtec.h> +#include <linux/platform_data/asoc-s3c24xx_simtec.h> #include <plat/devs.h> #include "simtec.h" diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c index d91c1a725139..17f8356177c1 100644 --- a/arch/arm/mach-s3c24xx/simtec-usb.c +++ b/arch/arm/mach-s3c24xx/simtec-usb.c @@ -34,7 +34,7 @@ #include <mach/hardware.h> #include <asm/irq.h> -#include <plat/usb-control.h> +#include <linux/platform_data/usb-ohci-s3c2410.h> #include <plat/devs.h> #include "simtec.h" diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c index 124fd5d63006..35f3e07eaccc 100644 --- a/arch/arm/mach-s3c64xx/dev-audio.c +++ b/arch/arm/mach-s3c64xx/dev-audio.c @@ -20,7 +20,7 @@ #include <mach/dma.h> #include <plat/devs.h> -#include <plat/audio.h> +#include <linux/platform_data/asoc-s3c.h> #include <plat/gpio-cfg.h> static const char *rclksrc[] = { diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index ffa29ddfdfce..15c58dfc4584 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -42,7 +42,7 @@ #include <asm/mach-types.h> #include <plat/regs-serial.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/fb.h> #include <plat/regs-fb-v4.h> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 9e382e7c77cb..181aa99427fe 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -24,7 +24,7 @@ #include <sound/wm8962.h> #include <sound/wm9081.h> -#include <plat/s3c64xx-spi.h> +#include <linux/platform_data/spi-s3c64xx.h> #include <mach/crag6410.h> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 09cd81207a3f..717d675188d4 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -61,14 +61,14 @@ #include <plat/fb.h> #include <plat/sdhci.h> #include <plat/gpio-cfg.h> -#include <plat/s3c64xx-spi.h> +#include <linux/platform_data/spi-s3c64xx.h> #include <plat/keypad.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/adc.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/pm.h> #include "common.h" diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index 689088162f77..02222b32b7d3 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -34,9 +34,9 @@ #include <asm/mach-types.h> #include <plat/regs-serial.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/fb.h> -#include <plat/nand.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> #include <plat/clock.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 5539a255a704..09311cc40115 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -38,9 +38,9 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/fb.h> -#include <plat/nand.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> #include <plat/regs-serial.h> -#include <plat/ts.h> +#include <linux/platform_data/touchscreen-s3c2410.h> #include <plat/regs-fb-v4.h> #include <video/platform_lcd.h> diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index cad2e05eddf7..46ee88d16815 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -37,7 +37,7 @@ #include <asm/mach-types.h> #include <plat/regs-serial.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/fb.h> #include <plat/clock.h> diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 326b21604bc3..6daca203e72b 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -39,9 +39,9 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/fb.h> -#include <plat/nand.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> #include <plat/regs-serial.h> -#include <plat/ts.h> +#include <linux/platform_data/touchscreen-s3c2410.h> #include <plat/regs-fb-v4.h> #include <video/platform_lcd.h> diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index ceeb1de40376..c6d7390939ae 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -30,13 +30,13 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> -#include <plat/hwmon.h> +#include <linux/platform_data/hwmon-s3c.h> #include <plat/regs-serial.h> -#include <plat/usb-control.h> +#include <linux/platform_data/usb-ohci-s3c2410.h> #include <plat/sdhci.h> -#include <plat/ts.h> +#include <linux/platform_data/touchscreen-s3c2410.h> #include <video/platform_lcd.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index b0f4525c66bd..a928fae5694e 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -35,7 +35,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include "common.h" diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 0fe4f1503f4f..2547a8846472 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -60,8 +60,8 @@ #include <mach/regs-gpio.h> #include <mach/regs-sys.h> #include <mach/regs-srom.h> -#include <plat/ata.h> -#include <plat/iic.h> +#include <linux/platform_data/ata-samsung_cf.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> @@ -69,7 +69,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/adc.h> -#include <plat/ts.h> +#include <linux/platform_data/touchscreen-s3c2410.h> #include <plat/keypad.h> #include <plat/backlight.h> #include <plat/regs-fb-v4.h> diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c index 241af94a9e70..40666ba8d607 100644 --- a/arch/arm/mach-s3c64xx/setup-i2c0.c +++ b/arch/arm/mach-s3c64xx/setup-i2c0.c @@ -18,7 +18,7 @@ struct platform_device; /* don't need the contents */ -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c index 3d13a961986d..3fdb24c4e62a 100644 --- a/arch/arm/mach-s3c64xx/setup-i2c1.c +++ b/arch/arm/mach-s3c64xx/setup-i2c1.c @@ -18,7 +18,7 @@ struct platform_device; /* don't need the contents */ -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c1_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-s3c64xx/setup-ide.c b/arch/arm/mach-s3c64xx/setup-ide.c index 41b425602d88..648d8b85bf6b 100644 --- a/arch/arm/mach-s3c64xx/setup-ide.c +++ b/arch/arm/mach-s3c64xx/setup-ide.c @@ -17,7 +17,7 @@ #include <mach/map.h> #include <mach/regs-clock.h> #include <plat/gpio-cfg.h> -#include <plat/ata.h> +#include <linux/platform_data/ata-samsung_cf.h> void s3c64xx_ide_setup_gpio(void) { diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c index 91113ddc51da..a0d6edfd23a0 100644 --- a/arch/arm/mach-s5p64x0/dev-audio.c +++ b/arch/arm/mach-s5p64x0/dev-audio.c @@ -13,7 +13,7 @@ #include <linux/gpio.h> #include <plat/gpio-cfg.h> -#include <plat/audio.h> +#include <linux/platform_data/asoc-s3c.h> #include <mach/map.h> #include <mach/dma.h> diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 92fefad505cc..dea78a848244 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -45,10 +45,10 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/pll.h> #include <plat/adc.h> -#include <plat/ts.h> +#include <linux/platform_data/touchscreen-s3c2410.h> #include <plat/s5p-time.h> #include <plat/backlight.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index e2335ecf6eae..6f14fc729b8f 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -45,10 +45,10 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/pll.h> #include <plat/adc.h> -#include <plat/ts.h> +#include <linux/platform_data/touchscreen-s3c2410.h> #include <plat/s5p-time.h> #include <plat/backlight.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s5p64x0/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c index 46b463917c54..a32edc545e6c 100644 --- a/arch/arm/mach-s5p64x0/setup-i2c0.c +++ b/arch/arm/mach-s5p64x0/setup-i2c0.c @@ -19,7 +19,7 @@ struct platform_device; /* don't need the contents */ #include <plat/gpio-cfg.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <mach/i2c.h> diff --git a/arch/arm/mach-s5p64x0/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c index 6ad3b986021c..ca2c5c7f8aa6 100644 --- a/arch/arm/mach-s5p64x0/setup-i2c1.c +++ b/arch/arm/mach-s5p64x0/setup-i2c1.c @@ -19,7 +19,7 @@ struct platform_device; /* don't need the contents */ #include <plat/gpio-cfg.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <mach/i2c.h> diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c index 9d4bde3f1110..1cc252cef268 100644 --- a/arch/arm/mach-s5pc100/dev-audio.c +++ b/arch/arm/mach-s5pc100/dev-audio.c @@ -13,7 +13,7 @@ #include <linux/gpio.h> #include <plat/gpio-cfg.h> -#include <plat/audio.h> +#include <linux/platform_data/asoc-s3c.h> #include <mach/map.h> #include <mach/dma.h> diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 0c3ae38d27ca..5d2c0934928b 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -44,12 +44,12 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> -#include <plat/iic.h> -#include <plat/ata.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/ata-samsung_cf.h> #include <plat/adc.h> #include <plat/keypad.h> -#include <plat/ts.h> -#include <plat/audio.h> +#include <linux/platform_data/touchscreen-s3c2410.h> +#include <linux/platform_data/asoc-s3c.h> #include <plat/backlight.h> #include <plat/regs-fb-v4.h> diff --git a/arch/arm/mach-s5pc100/setup-i2c0.c b/arch/arm/mach-s5pc100/setup-i2c0.c index eaef7a3bda49..89a6a769d622 100644 --- a/arch/arm/mach-s5pc100/setup-i2c0.c +++ b/arch/arm/mach-s5pc100/setup-i2c0.c @@ -18,7 +18,7 @@ struct platform_device; /* don't need the contents */ #include <linux/gpio.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-s5pc100/setup-i2c1.c b/arch/arm/mach-s5pc100/setup-i2c1.c index aaff74a90dee..faa667ef02cb 100644 --- a/arch/arm/mach-s5pc100/setup-i2c1.c +++ b/arch/arm/mach-s5pc100/setup-i2c1.c @@ -18,7 +18,7 @@ struct platform_device; /* don't need the contents */ #include <linux/gpio.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c1_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c index 8367749c3eec..0a5480bbcbd5 100644 --- a/arch/arm/mach-s5pv210/dev-audio.c +++ b/arch/arm/mach-s5pv210/dev-audio.c @@ -13,7 +13,7 @@ #include <linux/gpio.h> #include <plat/gpio-cfg.h> -#include <plat/audio.h> +#include <linux/platform_data/asoc-s3c.h> #include <mach/map.h> #include <mach/dma.h> diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 822a55950685..00f1e47d490a 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -43,7 +43,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/keypad.h> #include <plat/sdhci.h> #include <plat/clock.h> diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index dfc29236321c..d9c99fcc1aa7 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -27,8 +27,8 @@ #include <plat/regs-serial.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/ata.h> -#include <plat/iic.h> +#include <linux/platform_data/ata-samsung_cf.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/pm.h> #include <plat/s5p-time.h> #include <plat/mfc.h> diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 918b23d71fdf..7d6fab420508 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -38,9 +38,9 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/adc.h> -#include <plat/ts.h> -#include <plat/ata.h> -#include <plat/iic.h> +#include <linux/platform_data/touchscreen-s3c2410.h> +#include <linux/platform_data/ata-samsung_cf.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/keypad.h> #include <plat/pm.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c index 74e99bc0dc9b..18785cb5e1ef 100644 --- a/arch/arm/mach-s5pv210/mach-torbreck.c +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -26,7 +26,7 @@ #include <plat/regs-serial.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/s5p-time.h> #include "common.h" diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c index 0f1cc3a1c1e8..4a15849766c0 100644 --- a/arch/arm/mach-s5pv210/setup-i2c0.c +++ b/arch/arm/mach-s5pv210/setup-i2c0.c @@ -18,7 +18,7 @@ struct platform_device; /* don't need the contents */ -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c index f61365a34c56..4777f6b97a92 100644 --- a/arch/arm/mach-s5pv210/setup-i2c1.c +++ b/arch/arm/mach-s5pv210/setup-i2c1.c @@ -18,7 +18,7 @@ struct platform_device; /* don't need the contents */ -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c1_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c index 2f91b5cefbc6..bbce6c74b915 100644 --- a/arch/arm/mach-s5pv210/setup-i2c2.c +++ b/arch/arm/mach-s5pv210/setup-i2c2.c @@ -18,7 +18,7 @@ struct platform_device; /* don't need the contents */ -#include <plat/iic.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> void s3c_i2c2_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 74e31ce35538..07913acb214e 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -46,24 +46,24 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/adc.h> -#include <plat/ata.h> -#include <plat/ehci.h> +#include <linux/platform_data/ata-samsung_cf.h> +#include <linux/platform_data/usb-ehci-s5p.h> #include <plat/fb.h> #include <plat/fb-s3c2410.h> -#include <plat/hwmon.h> -#include <plat/iic.h> +#include <linux/platform_data/hwmon-s3c.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <plat/keypad.h> -#include <plat/mci.h> -#include <plat/nand.h> +#include <linux/platform_data/mmc-s3cmci.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> #include <plat/sdhci.h> -#include <plat/ts.h> -#include <plat/udc.h> -#include <plat/usb-control.h> +#include <linux/platform_data/touchscreen-s3c2410.h> +#include <linux/platform_data/usb-s3c2410_udc.h> +#include <linux/platform_data/usb-ohci-s3c2410.h> #include <plat/usb-phy.h> #include <plat/regs-iic.h> #include <plat/regs-serial.h> #include <plat/regs-spi.h> -#include <plat/s3c64xx-spi.h> +#include <linux/platform_data/spi-s3c64xx.h> static u64 samsung_device_dma_mask = DMA_BIT_MASK(32); diff --git a/arch/arm/plat-samsung/include/plat/ata.h b/arch/arm/plat-samsung/include/plat/ata.h deleted file mode 100644 index 2a3855a8372a..000000000000 --- a/arch/arm/plat-samsung/include/plat/ata.h +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/ata.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung CF-ATA platform_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_ATA_H -#define __ASM_PLAT_ATA_H __FILE__ - -/** - * struct s3c_ide_platdata - S3C IDE driver platform data. - * @setup_gpio: Setup the external GPIO pins to the right state for data - * transfer in true-ide mode. - */ -struct s3c_ide_platdata { - void (*setup_gpio)(void); -}; - -/* - * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver. - * @pdata: Platform data for IDE driver. - */ -extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata); - -/* architecture-specific IDE configuration */ -extern void s3c64xx_ide_setup_gpio(void); -extern void s5pc100_ide_setup_gpio(void); -extern void s5pv210_ide_setup_gpio(void); - -#endif /*__ASM_PLAT_ATA_H */ diff --git a/arch/arm/plat-samsung/include/plat/audio-simtec.h b/arch/arm/plat-samsung/include/plat/audio-simtec.h deleted file mode 100644 index 376af5286a3e..000000000000 --- a/arch/arm/plat-samsung/include/plat/audio-simtec.h +++ /dev/null @@ -1,34 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/audio-simtec.h - * - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Simtec Audio support. -*/ - -/** - * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio - * @use_mpllin: Select codec clock from MPLLin - * @output_cdclk: Need to output CDCLK to the codec - * @have_mic: Set if we have a MIC socket - * @have_lout: Set if we have a LineOut socket - * @amp_gpio: GPIO pin to enable the AMP - * @amp_gain: Option GPIO to control AMP gain - */ -struct s3c24xx_audio_simtec_pdata { - unsigned int use_mpllin:1; - unsigned int output_cdclk:1; - - unsigned int have_mic:1; - unsigned int have_lout:1; - - int amp_gpio; - int amp_gain[2]; - - void (*startup)(void); -}; diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h deleted file mode 100644 index aa9875f77c40..000000000000 --- a/arch/arm/plat-samsung/include/plat/audio.h +++ /dev/null @@ -1,59 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/audio.h - * - * Copyright (c) 2009 Samsung Electronics Co. Ltd - * Author: Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* The machine init code calls s3c*_ac97_setup_gpio with - * one of these defines in order to select appropriate bank - * of GPIO for AC97 pins - */ -#define S3C64XX_AC97_GPD 0 -#define S3C64XX_AC97_GPE 1 -extern void s3c64xx_ac97_setup_gpio(int); - -/* - * The machine init code calls s5p*_spdif_setup_gpio with - * one of these defines in order to select appropriate bank - * of GPIO for S/PDIF pins - */ -#define S5PC100_SPDIF_GPD 0 -#define S5PC100_SPDIF_GPG3 1 -extern void s5pc100_spdif_setup_gpio(int); - -struct samsung_i2s { -/* If the Primary DAI has 5.1 Channels */ -#define QUIRK_PRI_6CHAN (1 << 0) -/* If the I2S block has a Stereo Overlay Channel */ -#define QUIRK_SEC_DAI (1 << 1) -/* - * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit) - * The Machine driver must provide suitably set clock to the I2S block. - */ -#define QUIRK_NO_MUXPSR (1 << 2) -#define QUIRK_NEED_RSTCLR (1 << 3) - /* Quirks of the I2S controller */ - u32 quirks; - - /* - * Array of clock names that can be used to generate I2S signals. - * Also corresponds to clocks of I2SMOD[10] - */ - const char **src_clk; - dma_addr_t idma_addr; -}; - -/** - * struct s3c_audio_pdata - common platform data for audio device drivers - * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode - */ -struct s3c_audio_pdata { - int (*cfg_gpio)(struct platform_device *); - union { - struct samsung_i2s i2s; - } type; -}; diff --git a/arch/arm/plat-samsung/include/plat/ehci.h b/arch/arm/plat-samsung/include/plat/ehci.h deleted file mode 100644 index 5f28cae18582..000000000000 --- a/arch/arm/plat-samsung/include/plat/ehci.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PLAT_SAMSUNG_EHCI_H -#define __PLAT_SAMSUNG_EHCI_H __FILE__ - -struct s5p_ehci_platdata { - int (*phy_init)(struct platform_device *pdev, int type); - int (*phy_exit)(struct platform_device *pdev, int type); -}; - -extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd); - -#endif /* __PLAT_SAMSUNG_EHCI_H */ diff --git a/arch/arm/plat-samsung/include/plat/hwmon.h b/arch/arm/plat-samsung/include/plat/hwmon.h deleted file mode 100644 index c167e4429bc7..000000000000 --- a/arch/arm/plat-samsung/include/plat/hwmon.h +++ /dev/null @@ -1,51 +0,0 @@ -/* linux/arch/arm/plat-s3c/include/plat/hwmon.h - * - * Copyright 2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C - HWMon interface for ADC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_ADC_HWMON_H -#define __ASM_ARCH_ADC_HWMON_H __FILE__ - -/** - * s3c_hwmon_chcfg - channel configuration - * @name: The name to give this channel. - * @mult: Multiply the ADC value read by this. - * @div: Divide the value from the ADC by this. - * - * The value read from the ADC is converted to a value that - * hwmon expects (mV) by result = (value_read * @mult) / @div. - */ -struct s3c_hwmon_chcfg { - const char *name; - unsigned int mult; - unsigned int div; -}; - -/** - * s3c_hwmon_pdata - HWMON platform data - * @in: One configuration for each possible channel used. - */ -struct s3c_hwmon_pdata { - struct s3c_hwmon_chcfg *in[8]; -}; - -/** - * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device - * @pd: Platform data to register to device. - * - * Register the given platform data for use with the S3C HWMON device. - * The call will copy the platform data, so the board definitions can - * make the structure itself __initdata. - */ -extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd); - -#endif /* __ASM_ARCH_ADC_HWMON_H */ - diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h deleted file mode 100644 index 51d52e767a19..000000000000 --- a/arch/arm/plat-samsung/include/plat/iic.h +++ /dev/null @@ -1,77 +0,0 @@ -/* arch/arm/plat-s3c/include/plat/iic.h - * - * Copyright 2004-2009 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C - I2C Controller platform_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_IIC_H -#define __ASM_ARCH_IIC_H __FILE__ - -#define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */ - -/** - * struct s3c2410_platform_i2c - Platform data for s3c I2C. - * @bus_num: The bus number to use (if possible). - * @flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER). - * @slave_addr: The I2C address for the slave device (if enabled). - * @frequency: The desired frequency in Hz of the bus. This is - * guaranteed to not be exceeded. If the caller does - * not care, use zero and the driver will select a - * useful default. - * @sda_delay: The delay (in ns) applied to SDA edges. - * @cfg_gpio: A callback to configure the pins for I2C operation. - */ -struct s3c2410_platform_i2c { - int bus_num; - unsigned int flags; - unsigned int slave_addr; - unsigned long frequency; - unsigned int sda_delay; - - void (*cfg_gpio)(struct platform_device *dev); -}; - -/** - * s3c_i2c0_set_platdata - set platform data for i2c0 device - * @i2c: The platform data to set, or NULL for default data. - * - * Register the given platform data for use with the i2c0 device. This - * call copies the platform data, so the caller can use __initdata for - * their copy. - * - * This call will set cfg_gpio if is null to the default platform - * implementation. - * - * Any user of s3c_device_i2c0 should call this, even if it is with - * NULL to ensure that the device is given the default platform data - * as the driver will no longer carry defaults. - */ -extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c); -extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c); -extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c); -extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c); -extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c); -extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c); -extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c); -extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c); -extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c); - -/* defined by architecture to configure gpio */ -extern void s3c_i2c0_cfg_gpio(struct platform_device *dev); -extern void s3c_i2c1_cfg_gpio(struct platform_device *dev); -extern void s3c_i2c2_cfg_gpio(struct platform_device *dev); -extern void s3c_i2c3_cfg_gpio(struct platform_device *dev); -extern void s3c_i2c4_cfg_gpio(struct platform_device *dev); -extern void s3c_i2c5_cfg_gpio(struct platform_device *dev); -extern void s3c_i2c6_cfg_gpio(struct platform_device *dev); -extern void s3c_i2c7_cfg_gpio(struct platform_device *dev); - -extern struct s3c2410_platform_i2c default_i2c_data; - -#endif /* __ASM_ARCH_IIC_H */ diff --git a/arch/arm/plat-samsung/include/plat/mci.h b/arch/arm/plat-samsung/include/plat/mci.h deleted file mode 100644 index c42d31711944..000000000000 --- a/arch/arm/plat-samsung/include/plat/mci.h +++ /dev/null @@ -1,52 +0,0 @@ -#ifndef _ARCH_MCI_H -#define _ARCH_MCI_H - -/** - * struct s3c24xx_mci_pdata - sd/mmc controller platform data - * @no_wprotect: Set this to indicate there is no write-protect switch. - * @no_detect: Set this if there is no detect switch. - * @wprotect_invert: Invert the default sense of the write protect switch. - * @detect_invert: Invert the default sense of the write protect switch. - * @use_dma: Set to allow the use of DMA. - * @gpio_detect: GPIO number for the card detect line. - * @gpio_wprotect: GPIO number for the write protect line. - * @ocr_avail: The mask of the available power states, non-zero to use. - * @set_power: Callback to control the power mode. - * - * The @gpio_detect is used for card detection when @no_wprotect is unset, - * and the default sense is that 0 returned from gpio_get_value() means - * that a card is inserted. If @detect_invert is set, then the value from - * gpio_get_value() is inverted, which makes 1 mean card inserted. - * - * The driver will use @gpio_wprotect to signal whether the card is write - * protected if @no_wprotect is not set. A 0 returned from gpio_get_value() - * means the card is read/write, and 1 means read-only. The @wprotect_invert - * will invert the value returned from gpio_get_value(). - * - * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set - * to a non-zero value, otherwise the default of 3.2-3.4V is used. - */ -struct s3c24xx_mci_pdata { - unsigned int no_wprotect:1; - unsigned int no_detect:1; - unsigned int wprotect_invert:1; - unsigned int detect_invert:1; /* set => detect active high */ - unsigned int use_dma:1; - - unsigned int gpio_detect; - unsigned int gpio_wprotect; - unsigned long ocr_avail; - void (*set_power)(unsigned char power_mode, - unsigned short vdd); -}; - -/** - * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device - * @pdata: The platform data - * - * Copy the platform data supplied by @pdata so that this can be marked - * __initdata. - */ -extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata); - -#endif /* _ARCH_NCI_H */ diff --git a/arch/arm/plat-samsung/include/plat/mipi_csis.h b/arch/arm/plat-samsung/include/plat/mipi_csis.h deleted file mode 100644 index c45b1e8d4c2e..000000000000 --- a/arch/arm/plat-samsung/include/plat/mipi_csis.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. - * - * S5P series MIPI CSI slave device support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_ -#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__ - -struct platform_device; - -/** - * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver - * @clk_rate: bus clock frequency - * @lanes: number of data lanes used - * @alignment: data alignment in bits - * @hs_settle: HS-RX settle time - * @fixed_phy_vdd: false to enable external D-PHY regulator management in the - * driver or true in case this regulator has no enable function - * @phy_enable: pointer to a callback controlling D-PHY enable/reset - */ -struct s5p_platform_mipi_csis { - unsigned long clk_rate; - u8 lanes; - u8 alignment; - u8 hs_settle; - bool fixed_phy_vdd; - int (*phy_enable)(struct platform_device *pdev, bool on); -}; - -/** - * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control - * @pdev: MIPI-CSIS platform device - * @on: true to enable D-PHY and deassert its reset - * false to disable D-PHY - */ -int s5p_csis_phy_enable(struct platform_device *pdev, bool on); - -#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */ diff --git a/arch/arm/plat-samsung/include/plat/nand.h b/arch/arm/plat-samsung/include/plat/nand.h deleted file mode 100644 index b64115fa93a4..000000000000 --- a/arch/arm/plat-samsung/include/plat/nand.h +++ /dev/null @@ -1,67 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/nand.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - NAND device controller platform_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/** - * struct s3c2410_nand_set - define a set of one or more nand chips - * @disable_ecc: Entirely disable ECC - Dangerous - * @flash_bbt: Openmoko u-boot can create a Bad Block Table - * Setting this flag will allow the kernel to - * look for it at boot time and also skip the NAND - * scan. - * @options: Default value to set into 'struct nand_chip' options. - * @nr_chips: Number of chips in this set - * @nr_partitions: Number of partitions pointed to by @partitions - * @name: Name of set (optional) - * @nr_map: Map for low-layer logical to physical chip numbers (option) - * @partitions: The mtd partition list - * - * define a set of one or more nand chips registered with an unique mtd. Also - * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger - * a warning at boot time. - */ -struct s3c2410_nand_set { - unsigned int disable_ecc:1; - unsigned int flash_bbt:1; - - unsigned int options; - int nr_chips; - int nr_partitions; - char *name; - int *nr_map; - struct mtd_partition *partitions; - struct nand_ecclayout *ecc_layout; -}; - -struct s3c2410_platform_nand { - /* timing information for controller, all times in nanoseconds */ - - int tacls; /* time for active CLE/ALE to nWE/nOE */ - int twrph0; /* active time for nWE/nOE */ - int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ - - unsigned int ignore_unset_ecc:1; - - int nr_sets; - struct s3c2410_nand_set *sets; - - void (*select_chip)(struct s3c2410_nand_set *, - int chip); -}; - -/** - * s3c_nand_set_platdata() - register NAND platform data. - * @nand: The NAND platform data to register with s3c_device_nand. - * - * This function copies the given NAND platform data, @nand and registers - * it with the s3c_device_nand. This allows @nand to be __initdata. -*/ -extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand); diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h deleted file mode 100644 index ceba18d23a5a..000000000000 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ /dev/null @@ -1,68 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h - * - * Copyright (C) 2009 Samsung Electronics Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S3C64XX_PLAT_SPI_H -#define __S3C64XX_PLAT_SPI_H - -struct platform_device; - -/** - * struct s3c64xx_spi_csinfo - ChipSelect description - * @fb_delay: Slave specific feedback delay. - * Refer to FB_CLK_SEL register definition in SPI chapter. - * @line: Custom 'identity' of the CS line. - * - * This is per SPI-Slave Chipselect information. - * Allocate and initialize one in machine init code and make the - * spi_board_info.controller_data point to it. - */ -struct s3c64xx_spi_csinfo { - u8 fb_delay; - unsigned line; -}; - -/** - * struct s3c64xx_spi_info - SPI Controller defining structure - * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. - * @num_cs: Number of CS this controller emulates. - * @cfg_gpio: Configure pins for this SPI controller. - */ -struct s3c64xx_spi_info { - int src_clk_nr; - int num_cs; - int (*cfg_gpio)(void); -}; - -/** - * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board - * initialization code. - * @cfg_gpio: Pointer to gpio setup function. - * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks. - * @num_cs: Number of elements in the 'cs' array. - * - * Call this from machine init code for each SPI Controller that - * has some chips attached to it. - */ -extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, - int num_cs); -extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, - int num_cs); -extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, - int num_cs); - -/* defined by architecture to configure gpio */ -extern int s3c64xx_spi0_cfg_gpio(void); -extern int s3c64xx_spi1_cfg_gpio(void); -extern int s3c64xx_spi2_cfg_gpio(void); - -extern struct s3c64xx_spi_info s3c64xx_spi0_pdata; -extern struct s3c64xx_spi_info s3c64xx_spi1_pdata; -extern struct s3c64xx_spi_info s3c64xx_spi2_pdata; -#endif /* __S3C64XX_PLAT_SPI_H */ diff --git a/arch/arm/plat-samsung/include/plat/ts.h b/arch/arm/plat-samsung/include/plat/ts.h deleted file mode 100644 index 26fdb22e0fc2..000000000000 --- a/arch/arm/plat-samsung/include/plat/ts.h +++ /dev/null @@ -1,25 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/ts.h - * - * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARM_TS_H -#define __ASM_ARM_TS_H - -struct s3c2410_ts_mach_info { - int delay; - int presc; - int oversampling_shift; - void (*cfg_gpio)(struct platform_device *dev); -}; - -extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); - -/* defined by architecture to configure gpio */ -extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev); - -#endif /* __ASM_ARM_TS_H */ diff --git a/arch/arm/plat-samsung/include/plat/udc.h b/arch/arm/plat-samsung/include/plat/udc.h deleted file mode 100644 index de8e2288a509..000000000000 --- a/arch/arm/plat-samsung/include/plat/udc.h +++ /dev/null @@ -1,44 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/udc.h - * - * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * - * Changelog: - * 14-Mar-2005 RTP Created file - * 02-Aug-2005 RTP File rename - * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum - * 18-Jan-2007 HMW Add per-platform vbus_draw function -*/ - -#ifndef __ASM_ARM_ARCH_UDC_H -#define __ASM_ARM_ARCH_UDC_H - -enum s3c2410_udc_cmd_e { - S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */ - S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */ - S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */ -}; - -struct s3c2410_udc_mach_info { - void (*udc_command)(enum s3c2410_udc_cmd_e); - void (*vbus_draw)(unsigned int ma); - - unsigned int pullup_pin; - unsigned int pullup_pin_inverted; - - unsigned int vbus_pin; - unsigned char vbus_pin_inverted; -}; - -extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *); - -struct s3c24xx_hsudc_platdata; - -extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd); - -#endif /* __ASM_ARM_ARCH_UDC_H */ diff --git a/arch/arm/plat-samsung/include/plat/usb-control.h b/arch/arm/plat-samsung/include/plat/usb-control.h deleted file mode 100644 index 7fa1fbefc3f2..000000000000 --- a/arch/arm/plat-samsung/include/plat/usb-control.h +++ /dev/null @@ -1,43 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/usb-control.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C - USB host port information - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_USBCONTROL_H -#define __ASM_ARCH_USBCONTROL_H - -#define S3C_HCDFLG_USED (1) - -struct s3c2410_hcd_port { - unsigned char flags; - unsigned char power; - unsigned char oc_status; - unsigned char oc_changed; -}; - -struct s3c2410_hcd_info { - struct usb_hcd *hcd; - struct s3c2410_hcd_port port[2]; - - void (*power_control)(int port, int to); - void (*enable_oc)(struct s3c2410_hcd_info *, int on); - void (*report_oc)(struct s3c2410_hcd_info *, int ports); -}; - -static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports) -{ - if (info->report_oc != NULL) { - (info->report_oc)(info, ports); - } -} - -extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info); - -#endif /*__ASM_ARCH_USBCONTROL_H */ |