Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC-specific updates from Arnd Bergmann:
 "This is a larger set of new functionality for the existing SoC
  families, including:

   - vt8500 gains support for new CPU cores, notably the Cortex-A9 based
     wm8850

   - prima2 gains support for the "marco" SoC family, its SMP based
     cousin

   - tegra gains support for the new Tegra4 (Tegra114) family

   - socfpga now supports a newer version of the hardware including SMP

   - i.mx31 and bcm2835 are now using DT probing for their clocks

   - lots of updates for sh-mobile

   - OMAP updates for clocks, power management and USB

   - i.mx6q and tegra now support cpuidle

   - kirkwood now supports PCIe hot plugging

   - tegra clock support is updated

   - tegra USB PHY probing gets implemented diffently"

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits)
  ARM: prima2: remove duplicate v7_invalidate_l1
  ARM: shmobile: r8a7779: Correct TMU clock support again
  ARM: prima2: fix __init section for cpu hotplug
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3)
  arm: socfpga: Add SMP support for actual socfpga harware
  arm: Add v7_invalidate_l1 to cache-v7.S
  arm: socfpga: Add entries to enable make dtbs socfpga
  arm: socfpga: Add new device tree source for actual socfpga HW
  ARM: tegra: sort Kconfig selects for Tegra114
  ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
  ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
  ARM: tegra: Fix build error for gic update
  ARM: tegra: remove empty tegra_smp_init_cpus()
  ARM: shmobile: Register ARM architected timer
  ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
  ARM: shmobile: r8a7779: Correct TMU clock support
  ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
  ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
  ARM: mxs: use apbx bus clock to drive the timers on timrotv2
  ...

1 files changed, 0 insertions, 48 deletions

diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index b202c1272526..96001fd49b6c 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -16,54 +16,6 @@
 
 	__CPUINIT
 
-/* Cache invalidation nicked from arch/arm/mach-imx/head-v7.S, thanks!
- *
- * The secondary kernel init calls v7_flush_dcache_all before it enables
- * the L1; however, the L1 comes out of reset in an undefined state, so
- * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
- * of cache lines with uninitialized data and uninitialized tags to get
- * written out to memory, which does really unpleasant things to the main
- * processor.  We fix this by performing an invalidate, rather than a
- * clean + invalidate, before jumping into the kernel.
- *
- * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
- * to be called for both secondary cores startup and primary core resume
- * procedures.  Ideally, it should be moved into arch/arm/mm/cache-v7.S.
- */
-ENTRY(v7_invalidate_l1)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0	@ invalidate I cache
-	mcr	p15, 2, r0, c0, c0, 0
-	mrc	p15, 1, r0, c0, c0, 0
-
-	ldr	r1, =0x7fff
-	and	r2, r1, r0, lsr #13
-
-	ldr	r1, =0x3ff
-
-	and	r3, r1, r0, lsr #3	@ NumWays - 1
-	add	r2, r2, #1		@ NumSets
-
-	and	r0, r0, #0x7
-	add	r0, r0, #4	@ SetShift
-
-	clz	r1, r3		@ WayShift
-	add	r4, r3, #1	@ NumWays
-1:	sub	r2, r2, #1	@ NumSets--
-	mov	r3, r4		@ Temp = NumWays
-2:	subs	r3, r3, #1	@ Temp--
-	mov	r5, r3, lsl r1
-	mov	r6, r2, lsl r0
-	orr	r5, r5, r6	@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
-	mcr	p15, 0, r5, c7, c6, 2
-	bgt	2b
-	cmp	r2, #0
-	bgt	1b
-	dsb
-	isb
-	mov	pc, lr
-ENDPROC(v7_invalidate_l1)
-
 ENTRY(shmobile_invalidate_start)
 	bl	v7_invalidate_l1
 	b	secondary_startup