summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap1/irqs.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2022-05-26 10:43:09 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2022-05-26 10:43:09 -0700
commitecf0aa5317b0ad6bb015128a5b763c954fd58708 (patch)
tree2bf6f0eb2ad2922bc644b72be2a75ac0df6e4403 /arch/arm/mach-omap1/irqs.h
parenta0439cf4eca05fe562f19ece4b6761852d911adb (diff)
parent1a23accae82d780b5d5de6254d32c270aeb7f664 (diff)
Merge tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARMv4T/v5 multiplatform support from Arnd Bergmann: "This series has been 12 years in the making, it mostly finishes the work that was started with the founding of Linaro to clean up platform support in the kernel. The largest change here is a cleanup of the omap1 platform, which is the final ARM machine type to get converted to the common-clk subsystem. All the omap1 specific drivers are now made independent of the mach/*.h headers to allow the platform to be part of a generic ARMv4/v5 multiplatform kernel. The last bit that enables this support is still missing here while we wait for some last dependencies to make it into the mainline kernel through other subsystems. The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost at the point of allowing multiplatform kernels, this work gets completed here along with a few additional cleanup. At the same time, the s3c24xx and s3c64xx are now deprecated and expected to get removed in the future. The PXA and OMAP1 bits are in a separate branch because of dependencies. Once both branches are merged, only the three Intel StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels, and there are no plans to include these" * tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: ixp4xx: Consolidate Kconfig fixing issue ARM: versatile: Add missing of_node_put in dcscb_init ARM: config: Refresh IXP4xx config after multiplatform ARM: omap1: add back omap_set_dma_priority() stub ARM: omap: fix missing declaration warnings ARM: omap: fix address space warnings from sparse ARM: spear: remove include/mach/ subdirectory ARM: davinci: remove include/mach/ subdirectory ARM: omap2: remove include/mach/ subdirectory integrator: remove empty ap_init_early() ARM: s3c: fix include path MAINTAINERS: omap1: Add Janusz as an additional maintainer ARM: omap1: htc_herald: fix typos in comments ARM: OMAP1: fix typos in comments ARM: OMAP1: clock: Remove noop code ARM: OMAP1: clock: Remove unused code ARM: OMAP1: clock: Fix UART rate reporting algorithm ARM: OMAP1: clock: Fix early UART rate issues ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF ARM: omap1: fix build with no SoC selected ...
Diffstat (limited to 'arch/arm/mach-omap1/irqs.h')
-rw-r--r--arch/arm/mach-omap1/irqs.h249
1 files changed, 249 insertions, 0 deletions
diff --git a/arch/arm/mach-omap1/irqs.h b/arch/arm/mach-omap1/irqs.h
new file mode 100644
index 000000000000..2851acfe5ff3
--- /dev/null
+++ b/arch/arm/mach-omap1/irqs.h
@@ -0,0 +1,249 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) Greg Lonnon 2001
+ * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ * are different.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA (NR_IRQS_LEGACY + 1)
+#define INT_FIQ (NR_IRQS_LEGACY + 3)
+#define INT_RTDX (NR_IRQS_LEGACY + 6)
+#define INT_DSP_MMU_ABORT (NR_IRQS_LEGACY + 7)
+#define INT_HOST (NR_IRQS_LEGACY + 8)
+#define INT_ABORT (NR_IRQS_LEGACY + 9)
+#define INT_BRIDGE_PRIV (NR_IRQS_LEGACY + 13)
+#define INT_GPIO_BANK1 (NR_IRQS_LEGACY + 14)
+#define INT_UART3 (NR_IRQS_LEGACY + 15)
+#define INT_TIMER3 (NR_IRQS_LEGACY + 16)
+#define INT_DMA_CH0_6 (NR_IRQS_LEGACY + 19)
+#define INT_DMA_CH1_7 (NR_IRQS_LEGACY + 20)
+#define INT_DMA_CH2_8 (NR_IRQS_LEGACY + 21)
+#define INT_DMA_CH3 (NR_IRQS_LEGACY + 22)
+#define INT_DMA_CH4 (NR_IRQS_LEGACY + 23)
+#define INT_DMA_CH5 (NR_IRQS_LEGACY + 24)
+#define INT_TIMER1 (NR_IRQS_LEGACY + 26)
+#define INT_WD_TIMER (NR_IRQS_LEGACY + 27)
+#define INT_BRIDGE_PUB (NR_IRQS_LEGACY + 28)
+#define INT_TIMER2 (NR_IRQS_LEGACY + 30)
+#define INT_LCD_CTRL (NR_IRQS_LEGACY + 31)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ (NR_IRQS_LEGACY + 0)
+#define INT_1510_RES2 (NR_IRQS_LEGACY + 2)
+#define INT_1510_SPI_TX (NR_IRQS_LEGACY + 4)
+#define INT_1510_SPI_RX (NR_IRQS_LEGACY + 5)
+#define INT_1510_DSP_MAILBOX1 (NR_IRQS_LEGACY + 10)
+#define INT_1510_DSP_MAILBOX2 (NR_IRQS_LEGACY + 11)
+#define INT_1510_RES12 (NR_IRQS_LEGACY + 12)
+#define INT_1510_LB_MMU (NR_IRQS_LEGACY + 17)
+#define INT_1510_RES18 (NR_IRQS_LEGACY + 18)
+#define INT_1510_LOCAL_BUS (NR_IRQS_LEGACY + 29)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ
+#define INT_1610_IH2_FIQ (NR_IRQS_LEGACY + 2)
+#define INT_1610_McBSP2_TX (NR_IRQS_LEGACY + 4)
+#define INT_1610_McBSP2_RX (NR_IRQS_LEGACY + 5)
+#define INT_1610_DSP_MAILBOX1 (NR_IRQS_LEGACY + 10)
+#define INT_1610_DSP_MAILBOX2 (NR_IRQS_LEGACY + 11)
+#define INT_1610_LCD_LINE (NR_IRQS_LEGACY + 12)
+#define INT_1610_GPTIMER1 (NR_IRQS_LEGACY + 17)
+#define INT_1610_GPTIMER2 (NR_IRQS_LEGACY + 18)
+#define INT_1610_SSR_FIFO_0 (NR_IRQS_LEGACY + 29)
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
+ */
+#define INT_7XX_IH2_FIQ (NR_IRQS_LEGACY + 0)
+#define INT_7XX_IH2_IRQ (NR_IRQS_LEGACY + 1)
+#define INT_7XX_USB_NON_ISO (NR_IRQS_LEGACY + 2)
+#define INT_7XX_USB_ISO (NR_IRQS_LEGACY + 3)
+#define INT_7XX_ICR (NR_IRQS_LEGACY + 4)
+#define INT_7XX_EAC (NR_IRQS_LEGACY + 5)
+#define INT_7XX_GPIO_BANK1 (NR_IRQS_LEGACY + 6)
+#define INT_7XX_GPIO_BANK2 (NR_IRQS_LEGACY + 7)
+#define INT_7XX_GPIO_BANK3 (NR_IRQS_LEGACY + 8)
+#define INT_7XX_McBSP2TX (NR_IRQS_LEGACY + 10)
+#define INT_7XX_McBSP2RX (NR_IRQS_LEGACY + 11)
+#define INT_7XX_McBSP2RX_OVF (NR_IRQS_LEGACY + 12)
+#define INT_7XX_LCD_LINE (NR_IRQS_LEGACY + 14)
+#define INT_7XX_GSM_PROTECT (NR_IRQS_LEGACY + 15)
+#define INT_7XX_TIMER3 (NR_IRQS_LEGACY + 16)
+#define INT_7XX_GPIO_BANK5 (NR_IRQS_LEGACY + 17)
+#define INT_7XX_GPIO_BANK6 (NR_IRQS_LEGACY + 18)
+#define INT_7XX_SPGIO_WR (NR_IRQS_LEGACY + 29)
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE (NR_IRQS_LEGACY + 32)
+
+#define INT_KEYBOARD (1 + IH2_BASE)
+#define INT_uWireTX (2 + IH2_BASE)
+#define INT_uWireRX (3 + IH2_BASE)
+#define INT_I2C (4 + IH2_BASE)
+#define INT_MPUIO (5 + IH2_BASE)
+#define INT_USB_HHC_1 (6 + IH2_BASE)
+#define INT_McBSP3TX (10 + IH2_BASE)
+#define INT_McBSP3RX (11 + IH2_BASE)
+#define INT_McBSP1TX (12 + IH2_BASE)
+#define INT_McBSP1RX (13 + IH2_BASE)
+#define INT_UART1 (14 + IH2_BASE)
+#define INT_UART2 (15 + IH2_BASE)
+#define INT_BT_MCSI1TX (16 + IH2_BASE)
+#define INT_BT_MCSI1RX (17 + IH2_BASE)
+#define INT_SOSSI_MATCH (19 + IH2_BASE)
+#define INT_USB_W2FC (20 + IH2_BASE)
+#define INT_1WIRE (21 + IH2_BASE)
+#define INT_OS_TIMER (22 + IH2_BASE)
+#define INT_MMC (23 + IH2_BASE)
+#define INT_GAUGE_32K (24 + IH2_BASE)
+#define INT_RTC_TIMER (25 + IH2_BASE)
+#define INT_RTC_ALARM (26 + IH2_BASE)
+#define INT_MEM_STICK (27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU (28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO (31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC (0 + IH2_BASE)
+#define INT_1610_USB_HHC_2 (7 + IH2_BASE)
+#define INT_1610_USB_OTG (8 + IH2_BASE)
+#define INT_1610_SoSSI (9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH (19 + IH2_BASE)
+#define INT_1610_DSP_MMU (28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF (31 + IH2_BASE)
+#define INT_1610_STI (32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP (33 + IH2_BASE)
+#define INT_1610_GPTIMER3 (34 + IH2_BASE)
+#define INT_1610_GPTIMER4 (35 + IH2_BASE)
+#define INT_1610_GPTIMER5 (36 + IH2_BASE)
+#define INT_1610_GPTIMER6 (37 + IH2_BASE)
+#define INT_1610_GPTIMER7 (38 + IH2_BASE)
+#define INT_1610_GPTIMER8 (39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2 (40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3 (41 + IH2_BASE)
+#define INT_1610_MMC2 (42 + IH2_BASE)
+#define INT_1610_CF (43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4 (48 + IH2_BASE)
+#define INT_1610_SPI (49 + IH2_BASE)
+#define INT_1610_DMA_CH6 (53 + IH2_BASE)
+#define INT_1610_DMA_CH7 (54 + IH2_BASE)
+#define INT_1610_DMA_CH8 (55 + IH2_BASE)
+#define INT_1610_DMA_CH9 (56 + IH2_BASE)
+#define INT_1610_DMA_CH10 (57 + IH2_BASE)
+#define INT_1610_DMA_CH11 (58 + IH2_BASE)
+#define INT_1610_DMA_CH12 (59 + IH2_BASE)
+#define INT_1610_DMA_CH13 (60 + IH2_BASE)
+#define INT_1610_DMA_CH14 (61 + IH2_BASE)
+#define INT_1610_DMA_CH15 (62 + IH2_BASE)
+#define INT_1610_NAND (63 + IH2_BASE)
+#define INT_1610_SHA1MD5 (91 + IH2_BASE)
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
+ */
+#define INT_7XX_HW_ERRORS (0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE)
+#define INT_7XX_CFCD (2 + IH2_BASE)
+#define INT_7XX_CFIREQ (3 + IH2_BASE)
+#define INT_7XX_I2C (4 + IH2_BASE)
+#define INT_7XX_PCC (5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1 (7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI (8 + IH2_BASE)
+#define INT_7XX_VLYNQ (9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE)
+#define INT_7XX_McBSP1TX (11 + IH2_BASE)
+#define INT_7XX_McBSP1RX (12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE)
+#define INT_7XX_MCSI (16 + IH2_BASE)
+#define INT_7XX_uWireTX (17 + IH2_BASE)
+#define INT_7XX_uWireRX (18 + IH2_BASE)
+#define INT_7XX_SMC_CD (19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ (20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE)
+#define INT_7XX_TIMER32K (22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO (23 + IH2_BASE)
+#define INT_7XX_UPLD (24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1 (27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2 (28 + IH2_BASE)
+#define INT_7XX_USB_GENI (29 + IH2_BASE)
+#define INT_7XX_USB_OTG (30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF (31 + IH2_BASE)
+#define INT_7XX_RNG (32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN (34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5 (36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2 (37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE (38 + IH2_BASE)
+#define INT_7XX_MPUIO (39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE)
+#define INT_7XX_DMA_CH6 (53 + IH2_BASE)
+#define INT_7XX_DMA_CH7 (54 + IH2_BASE)
+#define INT_7XX_DMA_CH8 (55 + IH2_BASE)
+#define INT_7XX_DMA_CH9 (56 + IH2_BASE)
+#define INT_7XX_DMA_CH10 (57 + IH2_BASE)
+#define INT_7XX_DMA_CH11 (58 + IH2_BASE)
+#define INT_7XX_DMA_CH12 (59 + IH2_BASE)
+#define INT_7XX_DMA_CH13 (60 + IH2_BASE)
+#define INT_7XX_DMA_CH14 (61 + IH2_BASE)
+#define INT_7XX_DMA_CH15 (62 + IH2_BASE)
+#define INT_7XX_NAND (63 + IH2_BASE)
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES 192
+#define IH_GPIO_BASE (128 + IH2_BASE)
+#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END (IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END)
+#ifdef CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS 24
+#else
+#define OMAP_FPGA_NR_IRQS 0
+#endif
+#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+#define OMAP_IRQ_BIT(irq) (1 << ((irq - NR_IRQS_LEGACY) % 32))
+
+#ifdef CONFIG_FIQ
+#define FIQ_START 1024
+#endif
+
+#endif