ARM: mvebu: Enable NAND controller in ReadyNAS 104 .dts file

Now that NAND controller support is available for Armada 370
(cb28e2537a6f: ARM: mvebu: Add support for NAND controller in
Armada 370/XP), this patch enables support for ReadyNAS 104 and
defines default partition layout as delivered by NETGEAR.

As described in similar commits 2be2bc39c6f0 (ARM: mvebu: Enable
NAND controller in Armada XP GP board) and d8c552dddfbf (ARM:
mvebu: Enable NAND controller in Armada 370 Mirabox),
"marvell,keep-config" parameter is used as current support does
not allow for setting of timing parameters yet.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

1 files changed, 36 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index e48e5fb6a065..272e2e2fc58f 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -133,6 +133,42 @@
 					reg = <0x23>;
 				};
 			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0000000 0x180000>;  /* 1.5MB */
+					read-only;
+				};
+
+				partition@180000 {
+					label = "u-boot-env";
+					reg = <0x180000 0x20000>;    /* 128KB */
+					read-only;
+				};
+
+				partition@200000 {
+					label = "uImage";
+					reg = <0x0200000 0x600000>;    /* 6MB */
+				};
+
+				partition@800000 {
+					label = "minirootfs";
+					reg = <0x0800000 0x400000>;    /* 4MB */
+				};
+
+				/* Last MB is for the BBT, i.e. not writable */
+				partition@c00000 {
+					label = "ubifs";
+					reg = <0x0c00000 0x7400000>; /* 116MB */
+				};
+			};
 		};
 	};