ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 178 deletions

diff --git a/arch/arm/boot/dts/arm-realview-pba8.dts b/arch/arm/boot/dts/arm-realview-pba8.dts
deleted file mode 100644
index d3238c252b59..000000000000
--- a/arch/arm/boot/dts/arm-realview-pba8.dts
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "arm-realview-pbx.dtsi"
-
-/ {
-	model = "ARM RealView Platform Baseboard for Cortex-A8";
-	compatible = "arm,realview-pba8";
-	arm,hbi = <0x178>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "arm,realview-smp";
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0>;
-		};
-	};
-
-	pmu: pmu@0 {
-		compatible = "arm,cortex-a8-pmu";
-		interrupt-parent = <&intc>;
-		interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>;
-	};
-
-	/* Primary GIC PL390 interrupt controller in the test chip */
-	intc: interrupt-controller@1e000000 {
-		compatible = "arm,pl390";
-		#interrupt-cells = <3>;
-		#address-cells = <1>;
-		interrupt-controller;
-		reg = <0x1e001000 0x1000>,
-		      <0x1e000000 0x100>;
-	};
-};
-
-&ethernet {
-	interrupt-parent = <&intc>;
-	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usb {
-	interrupt-parent = <&intc>;
-	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&soc {
-	compatible = "arm,realview-pba8-soc", "simple-bus";
-};
-
-&syscon {
-	compatible = "arm,realview-pba8-syscon", "syscon", "simple-mfd";
-};
-
-&serial0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial2 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&serial3 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&ssp {
-	interrupt-parent = <&intc>;
-	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&wdog0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&wdog1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&timer01 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&timer23 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio2 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&rtc {
-	interrupt-parent = <&intc>;
-	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&timer45 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&timer67 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&aaci {
-	interrupt-parent = <&intc>;
-	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&mmc {
-	interrupt-parent = <&intc>;
-	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 18 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&kmi0 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&kmi1 {
-	interrupt-parent = <&intc>;
-	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&clcd {
-	interrupt-parent = <&intc>;
-	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-};