Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 277 insertions, 0 deletions

diff --git a/arch/alpha/kernel/smc37c93x.c b/arch/alpha/kernel/smc37c93x.c
new file mode 100644
index 000000000000..421e51ea6bb7
--- /dev/null
+++ b/arch/alpha/kernel/smc37c93x.c
@@ -0,0 +1,277 @@
+/*
+ * SMC 37C93X initialization code
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/hwrpb.h>
+#include <asm/io.h>
+#include <asm/segment.h>
+
+#define SMC_DEBUG 0
+
+#if SMC_DEBUG
+# define DBG_DEVS(args)         printk args
+#else
+# define DBG_DEVS(args)
+#endif
+
+#define KB              1024
+#define MB              (1024*KB)
+#define GB              (1024*MB)
+
+/* device "activate" register contents */
+#define DEVICE_ON		1
+#define DEVICE_OFF		0
+
+/* configuration on/off keys */
+#define CONFIG_ON_KEY		0x55
+#define CONFIG_OFF_KEY		0xaa
+
+/* configuration space device definitions */
+#define FDC			0
+#define IDE1			1
+#define IDE2			2
+#define PARP			3
+#define SER1			4
+#define SER2			5
+#define RTCL			6
+#define KYBD			7
+#define AUXIO			8
+
+/* Chip register offsets from base */
+#define CONFIG_CONTROL		0x02
+#define INDEX_ADDRESS		0x03
+#define LOGICAL_DEVICE_NUMBER	0x07
+#define DEVICE_ID		0x20
+#define DEVICE_REV		0x21
+#define POWER_CONTROL		0x22
+#define POWER_MGMT		0x23
+#define OSC			0x24
+
+#define ACTIVATE		0x30
+#define ADDR_HI			0x60
+#define ADDR_LO			0x61
+#define INTERRUPT_SEL		0x70
+#define INTERRUPT_SEL_2		0x72 /* KYBD/MOUS only */
+#define DMA_CHANNEL_SEL		0x74 /* FDC/PARP only */
+
+#define FDD_MODE_REGISTER	0x90
+#define FDD_OPTION_REGISTER	0x91
+
+/* values that we read back that are expected ... */
+#define VALID_DEVICE_ID		2
+
+/* default device addresses */
+#define KYBD_INTERRUPT		1
+#define MOUS_INTERRUPT		12
+#define COM2_BASE		0x2f8
+#define COM2_INTERRUPT		3
+#define COM1_BASE		0x3f8
+#define COM1_INTERRUPT		4
+#define PARP_BASE		0x3bc
+#define PARP_INTERRUPT		7
+
+static unsigned long __init SMCConfigState(unsigned long baseAddr)
+{
+	unsigned char devId;
+	unsigned char devRev;
+
+	unsigned long configPort;
+	unsigned long indexPort;
+	unsigned long dataPort;
+
+	int i;
+
+	configPort = indexPort = baseAddr;
+	dataPort = configPort + 1;
+
+#define NUM_RETRIES 5
+
+	for (i = 0; i < NUM_RETRIES; i++)
+	{
+		outb(CONFIG_ON_KEY, configPort);
+		outb(CONFIG_ON_KEY, configPort);
+		outb(DEVICE_ID, indexPort);
+		devId = inb(dataPort);
+		if (devId == VALID_DEVICE_ID) {
+			outb(DEVICE_REV, indexPort);
+			devRev = inb(dataPort);
+			break;
+		}
+		else
+			udelay(100);
+	}
+	return (i != NUM_RETRIES) ? baseAddr : 0L;
+}
+
+static void __init SMCRunState(unsigned long baseAddr)
+{
+	outb(CONFIG_OFF_KEY, baseAddr);
+}
+
+static unsigned long __init SMCDetectUltraIO(void)
+{
+	unsigned long baseAddr;
+
+	baseAddr = 0x3F0;
+	if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x3F0 ) {
+		return( baseAddr );
+	}
+	baseAddr = 0x370;
+	if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x370 ) {
+		return( baseAddr );
+	}
+	return( ( unsigned long )0 );
+}
+
+static void __init SMCEnableDevice(unsigned long baseAddr,
+			    unsigned long device,
+			    unsigned long portaddr,
+			    unsigned long interrupt)
+{
+	unsigned long indexPort;
+	unsigned long dataPort;
+
+	indexPort = baseAddr;
+	dataPort = baseAddr + 1;
+
+	outb(LOGICAL_DEVICE_NUMBER, indexPort);
+	outb(device, dataPort);
+
+	outb(ADDR_LO, indexPort);
+	outb(( portaddr & 0xFF ), dataPort);
+
+	outb(ADDR_HI, indexPort);
+	outb((portaddr >> 8) & 0xFF, dataPort);
+
+	outb(INTERRUPT_SEL, indexPort);
+	outb(interrupt, dataPort);
+
+	outb(ACTIVATE, indexPort);
+	outb(DEVICE_ON, dataPort);
+}
+
+static void __init SMCEnableKYBD(unsigned long baseAddr)
+{
+	unsigned long indexPort;
+	unsigned long dataPort;
+
+	indexPort = baseAddr;
+	dataPort = baseAddr + 1;
+
+	outb(LOGICAL_DEVICE_NUMBER, indexPort);
+	outb(KYBD, dataPort);
+
+	outb(INTERRUPT_SEL, indexPort); /* Primary interrupt select */
+	outb(KYBD_INTERRUPT, dataPort);
+
+	outb(INTERRUPT_SEL_2, indexPort); /* Secondary interrupt select */
+	outb(MOUS_INTERRUPT, dataPort);
+
+	outb(ACTIVATE, indexPort);
+	outb(DEVICE_ON, dataPort);
+}
+
+static void __init SMCEnableFDC(unsigned long baseAddr)
+{
+	unsigned long indexPort;
+	unsigned long dataPort;
+
+	unsigned char oldValue;
+
+	indexPort = baseAddr;
+	dataPort = baseAddr + 1;
+
+	outb(LOGICAL_DEVICE_NUMBER, indexPort);
+	outb(FDC, dataPort);
+
+	outb(FDD_MODE_REGISTER, indexPort);
+	oldValue = inb(dataPort);
+
+	oldValue |= 0x0E;                   /* Enable burst mode */
+	outb(oldValue, dataPort);
+
+	outb(INTERRUPT_SEL, indexPort);	    /* Primary interrupt select */
+	outb(0x06, dataPort );
+
+	outb(DMA_CHANNEL_SEL, indexPort);   /* DMA channel select */
+	outb(0x02, dataPort);
+
+	outb(ACTIVATE, indexPort);
+	outb(DEVICE_ON, dataPort);
+}
+
+#if SMC_DEBUG
+static void __init SMCReportDeviceStatus(unsigned long baseAddr)
+{
+	unsigned long indexPort;
+	unsigned long dataPort;
+	unsigned char currentControl;
+
+	indexPort = baseAddr;
+	dataPort = baseAddr + 1;
+
+	outb(POWER_CONTROL, indexPort);
+	currentControl = inb(dataPort);
+
+	printk(currentControl & (1 << FDC)
+	       ? "\t+FDC Enabled\n" : "\t-FDC Disabled\n");
+	printk(currentControl & (1 << IDE1)
+	       ? "\t+IDE1 Enabled\n" : "\t-IDE1 Disabled\n");
+	printk(currentControl & (1 << IDE2)
+	       ? "\t+IDE2 Enabled\n" : "\t-IDE2 Disabled\n");
+	printk(currentControl & (1 << PARP)
+	       ? "\t+PARP Enabled\n" : "\t-PARP Disabled\n");
+	printk(currentControl & (1 << SER1)
+	       ? "\t+SER1 Enabled\n" : "\t-SER1 Disabled\n");
+	printk(currentControl & (1 << SER2)
+	       ? "\t+SER2 Enabled\n" : "\t-SER2 Disabled\n");
+
+	printk( "\n" );
+}
+#endif
+
+int __init SMC93x_Init(void)
+{
+	unsigned long SMCUltraBase;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if ((SMCUltraBase = SMCDetectUltraIO()) != 0UL) {
+#if SMC_DEBUG
+		SMCReportDeviceStatus(SMCUltraBase);
+#endif
+		SMCEnableDevice(SMCUltraBase, SER1, COM1_BASE, COM1_INTERRUPT);
+		DBG_DEVS(("SMC FDC37C93X: SER1 done\n"));
+		SMCEnableDevice(SMCUltraBase, SER2, COM2_BASE, COM2_INTERRUPT);
+		DBG_DEVS(("SMC FDC37C93X: SER2 done\n"));
+		SMCEnableDevice(SMCUltraBase, PARP, PARP_BASE, PARP_INTERRUPT);
+		DBG_DEVS(("SMC FDC37C93X: PARP done\n"));
+		/* On PC164, IDE on the SMC is not enabled;
+		   CMD646 (PCI) on MB */
+		SMCEnableKYBD(SMCUltraBase);
+		DBG_DEVS(("SMC FDC37C93X: KYB done\n"));
+		SMCEnableFDC(SMCUltraBase);
+		DBG_DEVS(("SMC FDC37C93X: FDC done\n"));
+#if SMC_DEBUG
+		SMCReportDeviceStatus(SMCUltraBase);
+#endif
+		SMCRunState(SMCUltraBase);
+		local_irq_restore(flags);
+		printk("SMC FDC37C93X Ultra I/O Controller found @ 0x%lx\n",
+		       SMCUltraBase);
+		return 1;
+	}
+	else {
+		local_irq_restore(flags);
+		DBG_DEVS(("No SMC FDC37C93X Ultra I/O Controller found\n"));
+		return 0;
+	}
+}