Merge tag 'hwmon-for-linus-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New driver for MAX31790, added support for TMP75C, as well as cleanups
  and minor improvements in various drivers"

* tag 'hwmon-for-linus-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (fam15h_power) Add max compute unit accumulated power
  hwmon: (fam15h_power) Enable power1_input on AMD Carrizo
  hwmon: (fam15h_power) Refactor attributes for dynamically added
  hwmon: (ina2xx) remove no longer used variable 'kind'
  hwmon: (nct6775) Introduce separate temperature labels for NCT6792 and NCT6793
  hwmon: (nct6775) NCT6791D and NCT6792D have an additional temperature source
  hwmon: (ina2xx) give precedence to DT over checking for platform data.
  hwmon: (ina2xx) convert driver to using regmap
  hwmon: (coretemp) Increase limit of maximum core ID from 32 to 128.
  hwmon: (lm75) Add support for TMP75C
  hwmon: (ibmpowernv) Add OF compatibility table entry
  hwmon: (abx500) drop the use of IRQF_NO_SUSPEND
  hwmon: (max31790) Fix dereference of ERR_PTR
  hwmon: Driver for Maxim MAX31790

2 files changed, 40 insertions, 2 deletions

diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75
index 67691a0aa41d..ac95edfcd907 100644
--- a/Documentation/hwmon/lm75
+++ b/Documentation/hwmon/lm75
@@ -42,8 +42,8 @@ Supported chips:
     Addresses scanned: none
     Datasheet: Publicly available at the ST website
                http://www.st.com/internet/analog/product/121769.jsp
-  * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP175, TMP275
-    Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp275'
+  * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75C, TMP175, TMP275
+    Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75c', 'tmp275'
     Addresses scanned: none
     Datasheet: Publicly available at the Texas Instruments website
                http://www.ti.com/product/tmp100
@@ -51,6 +51,7 @@ Supported chips:
                http://www.ti.com/product/tmp105
                http://www.ti.com/product/tmp112
                http://www.ti.com/product/tmp75
+               http://www.ti.com/product/tmp75c
                http://www.ti.com/product/tmp175
                http://www.ti.com/product/tmp275
   * NXP LM75B
diff --git a/Documentation/hwmon/max31790 b/Documentation/hwmon/max31790
new file mode 100644
index 000000000000..855e62430da9
--- /dev/null
+++ b/Documentation/hwmon/max31790
@@ -0,0 +1,37 @@
+Kernel driver max31790
+======================
+
+Supported chips:
+  * Maxim MAX31790
+    Prefix: 'max31790'
+    Addresses scanned: -
+    Datasheet: http://pdfserv.maximintegrated.com/en/ds/MAX31790.pdf
+
+Author: Il Han <corone.il.han@gmail.com>
+
+
+Description
+-----------
+
+This driver implements support for the Maxim MAX31790 chip.
+
+The MAX31790 controls the speeds of up to six fans using six independent
+PWM outputs. The desired fan speeds (or PWM duty cycles) are written
+through the I2C interface. The outputs drive "4-wire" fans directly,
+or can be used to modulate the fan's power terminals using an external
+pass transistor.
+
+Tachometer inputs monitor fan tachometer logic outputs for precise (+/-1%)
+monitoring and control of fan RPM as well as detection of fan failure.
+Six pins are dedicated tachometer inputs. Any of the six PWM outputs can
+also be configured to serve as tachometer inputs.
+
+
+Sysfs entries
+-------------
+
+fan[1-12]_input    RO  fan tachometer speed in RPM
+fan[1-12]_fault    RO  fan experienced fault
+fan[1-6]_target    RW  desired fan speed in RPM
+pwm[1-6]_enable    RW  regulator mode, 0=disabled, 1=manual mode, 2=rpm mode
+pwm[1-6]           RW  fan target duty cycle (0-255)