dt-bindings: remove 'interrupt-parent' from bindings

'interrupt-parent' is often documented as part of define bindings, but
it is really outside the scope of a device binding. It's never required
in a given node as it is often inherited from a parent node. Or it can
be implicit if a parent node is an 'interrupt-controller' node. So
remove it from all the binding files.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

6 files changed, 0 insertions, 8 deletions

diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
index f25feee62b15..03e9cf7b42e0 100644
--- a/Documentation/devicetree/bindings/dma/jz4780-dma.txt
+++ b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
@@ -5,7 +5,6 @@ Required properties:
 - compatible: Should be "ingenic,jz4780-dma"
 - reg: Should contain the DMA controller registers location and length.
 - interrupts: Should contain the interrupt specifier of the DMA controller.
-- interrupt-parent: Should be the phandle of the interrupt controller that
 - clocks: Should contain a clock specifier for the JZ4780 PDMA clock.
 - #dma-cells: Must be <2>. Number of integer cells in the dmas property of
   DMA clients (see below).
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt
index 1e1dc8f972e4..2f35b047f772 100644
--- a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt
@@ -8,7 +8,6 @@ Required properties:
 - reg: Should contain DMA registers location and length. This should be
   a single entry that includes all of the per-channel registers in one
   contiguous bank.
-- interrupt-parent: Phandle to the interrupt parent controller.
 - interrupts: Should contain all of the per-channel DMA interrupts in
   ascending order with respect to the DMA channel index.
 - clocks: Must contain one entry for the ADMA module clock
diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
index f237b7928283..dbe160400adc 100644
--- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
@@ -5,8 +5,6 @@ Required properties:
 - reg: Address range of the DMAC registers. This should include
   all of the per-channel registers.
 - interrupt: Should contain the DMAC interrupt number.
-- interrupt-parent: Should be the phandle for the interrupt controller
-  that services interrupts for this device.
 - dma-channels: Number of channels supported by hardware.
 - snps,dma-masters: Number of AXI masters supported by the hardware.
 - snps,data-width: Maximum AXI data width supported by hardware.
diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt
index 99acc712f83a..39e2b26be344 100644
--- a/Documentation/devicetree/bindings/dma/snps-dma.txt
+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
@@ -23,8 +23,6 @@ Deprecated properties:
 
 
 Optional properties:
-- interrupt-parent: Should be the phandle for the interrupt controller
-  that services interrupts for this device
 - is_private: The device channels should be marked as private and not for by the
   general purpose DMA channel allocator. False if not passed.
 - multi-block: Multi block transfers supported by hardware. Array property with
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 3f15f6644527..4bbc94d829c8 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -201,7 +201,6 @@ Required properties:
 - #dma-cells: Should be set to <1>
               Clients should use a single channel number per DMA request.
 - reg: Memory map for accessing module
-- interrupt-parent: Interrupt controller the interrupt is routed through
 - interrupts: Exactly 3 interrupts need to be specified in the order:
               1. Transfer completion interrupt.
               2. Memory protection interrupt.
diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
index a784cdd94790..07a5a7aa9ea0 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
@@ -5,7 +5,6 @@ control and rate control support for slave/peripheral dma access.
 Required properties:
 - compatible		: Should be "xlnx,zynqmp-dma-1.0"
 - reg			: Memory map for gdma/adma module access.
-- interrupt-parent	: Interrupt controller the interrupt is routed through
 - interrupts		: Should contain DMA channel interrupt.
 - xlnx,bus-width	: Axi buswidth in bits. Should contain 128 or 64
 - clock-names		: List of input clocks "clk_main", "clk_apb"